config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

38 files changed, 212 insertions, 213 deletions

diff --git a/miscutils/adjtimex.c b/miscutils/adjtimex.c
index c91527f..04ba563 100644
--- a/miscutils/adjtimex.c
+++ b/miscutils/adjtimex.c
@@ -15,8 +15,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Adjtimex reads and optionally sets adjustment parameters for
-//config:	  the Linux clock adjustment algorithm.
+//config:	Adjtimex reads and optionally sets adjustment parameters for
+//config:	the Linux clock adjustment algorithm.
 
 //applet:IF_ADJTIMEX(APPLET(adjtimex, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/bbconfig.c b/miscutils/bbconfig.c
index faaacad..045aca2 100644
--- a/miscutils/bbconfig.c
+++ b/miscutils/bbconfig.c
@@ -5,22 +5,22 @@
 //config:	bool "bbconfig (9.7 kb)"
 //config:	default n
 //config:	help
-//config:	  The bbconfig applet will print the config file with which
-//config:	  busybox was built.
+//config:	The bbconfig applet will print the config file with which
+//config:	busybox was built.
 //config:
 //config:config FEATURE_COMPRESS_BBCONFIG
 //config:	bool "Compress bbconfig data"
 //config:	default y
 //config:	depends on BBCONFIG
 //config:	help
-//config:	  Store bbconfig data in compressed form, uncompress them on-the-fly
-//config:	  before output.
+//config:	Store bbconfig data in compressed form, uncompress them on-the-fly
+//config:	before output.
 //config:
-//config:	  If you have a really tiny busybox with few applets enabled (and
-//config:	  bunzip2 isn't one of them), the overhead of the decompressor might
-//config:	  be noticeable. Also, if you run executables directly from ROM
-//config:	  and have very little memory, this might not be a win. Otherwise,
-//config:	  you probably want this.
+//config:	If you have a really tiny busybox with few applets enabled (and
+//config:	bunzip2 isn't one of them), the overhead of the decompressor might
+//config:	be noticeable. Also, if you run executables directly from ROM
+//config:	and have very little memory, this might not be a win. Otherwise,
+//config:	you probably want this.
 
 //applet:IF_BBCONFIG(APPLET(bbconfig, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/beep.c b/miscutils/beep.c
index 782656f..b9b62f7 100644
--- a/miscutils/beep.c
+++ b/miscutils/beep.c
@@ -12,7 +12,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The beep applets beeps in a given freq/Hz.
+//config:	The beep applets beeps in a given freq/Hz.
 //config:
 //config:config FEATURE_BEEP_FREQ
 //config:	int "default frequency"
@@ -20,7 +20,7 @@
 //config:	default 4000
 //config:	depends on BEEP
 //config:	help
-//config:	  Frequency for default beep.
+//config:	Frequency for default beep.
 //config:
 //config:config FEATURE_BEEP_LENGTH_MS
 //config:	int "default length"
@@ -28,7 +28,7 @@
 //config:	default 30
 //config:	depends on BEEP
 //config:	help
-//config:	  Length in ms for default beep.
+//config:	Length in ms for default beep.
 
 //applet:IF_BEEP(APPLET(beep, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/chat.c b/miscutils/chat.c
index a1dc753..216a899 100644
--- a/miscutils/chat.c
+++ b/miscutils/chat.c
@@ -11,68 +11,68 @@
 //config:	bool "chat (6.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Simple chat utility.
+//config:	Simple chat utility.
 //config:
 //config:config FEATURE_CHAT_NOFAIL
 //config:	bool "Enable NOFAIL expect strings"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  When enabled expect strings which are started with a dash trigger
-//config:	  no-fail mode. That is when expectation is not met within timeout
-//config:	  the script is not terminated but sends next SEND string and waits
-//config:	  for next EXPECT string. This allows to compose far more flexible
-//config:	  scripts.
+//config:	When enabled expect strings which are started with a dash trigger
+//config:	no-fail mode. That is when expectation is not met within timeout
+//config:	the script is not terminated but sends next SEND string and waits
+//config:	for next EXPECT string. This allows to compose far more flexible
+//config:	scripts.
 //config:
 //config:config FEATURE_CHAT_TTY_HIFI
 //config:	bool "Force STDIN to be a TTY"
 //config:	depends on CHAT
 //config:	default n
 //config:	help
-//config:	  Original chat always treats STDIN as a TTY device and sets for it
-//config:	  so-called raw mode. This option turns on such behaviour.
+//config:	Original chat always treats STDIN as a TTY device and sets for it
+//config:	so-called raw mode. This option turns on such behaviour.
 //config:
 //config:config FEATURE_CHAT_IMPLICIT_CR
 //config:	bool "Enable implicit Carriage Return"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  When enabled make chat to terminate all SEND strings with a "\r"
-//config:	  unless "\c" is met anywhere in the string.
+//config:	When enabled make chat to terminate all SEND strings with a "\r"
+//config:	unless "\c" is met anywhere in the string.
 //config:
 //config:config FEATURE_CHAT_SWALLOW_OPTS
 //config:	bool "Swallow options"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  Busybox chat require no options. To make it not fail when used
-//config:	  in place of original chat (which has a bunch of options) turn
-//config:	  this on.
+//config:	Busybox chat require no options. To make it not fail when used
+//config:	in place of original chat (which has a bunch of options) turn
+//config:	this on.
 //config:
 //config:config FEATURE_CHAT_SEND_ESCAPES
 //config:	bool "Support weird SEND escapes"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  Original chat uses some escape sequences in SEND arguments which
-//config:	  are not sent to device but rather performs special actions.
-//config:	  E.g. "\K" means to send a break sequence to device.
-//config:	  "\d" delays execution for a second, "\p" -- for a 1/100 of second.
-//config:	  Before turning this option on think twice: do you really need them?
+//config:	Original chat uses some escape sequences in SEND arguments which
+//config:	are not sent to device but rather performs special actions.
+//config:	E.g. "\K" means to send a break sequence to device.
+//config:	"\d" delays execution for a second, "\p" -- for a 1/100 of second.
+//config:	Before turning this option on think twice: do you really need them?
 //config:
 //config:config FEATURE_CHAT_VAR_ABORT_LEN
 //config:	bool "Support variable-length ABORT conditions"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
+//config:	Original chat uses fixed 50-bytes length ABORT conditions. Say N here.
 //config:
 //config:config FEATURE_CHAT_CLR_ABORT
 //config:	bool "Support revoking of ABORT conditions"
 //config:	depends on CHAT
 //config:	default y
 //config:	help
-//config:	  Support CLR_ABORT directive.
+//config:	Support CLR_ABORT directive.
 
 //applet:IF_CHAT(APPLET(chat, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/conspy.c b/miscutils/conspy.c
index 22a6918..47b9e72 100644
--- a/miscutils/conspy.c
+++ b/miscutils/conspy.c
@@ -14,10 +14,10 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  A text-mode VNC like program for Linux virtual terminals.
-//config:	  example:  conspy NUM      shared access to console num
-//config:	  or        conspy -nd NUM  screenshot of console num
-//config:	  or        conspy -cs NUM  poor man's GNU screen like
+//config:	A text-mode VNC like program for Linux virtual terminals.
+//config:	example:  conspy NUM      shared access to console num
+//config:	or        conspy -nd NUM  screenshot of console num
+//config:	or        conspy -cs NUM  poor man's GNU screen like
 
 //applet:IF_CONSPY(APPLET(conspy, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/crond.c b/miscutils/crond.c
index 8d24f29..6c54e1a 100644
--- a/miscutils/crond.c
+++ b/miscutils/crond.c
@@ -13,50 +13,50 @@
 //config:	default y
 //config:	select FEATURE_SYSLOG
 //config:	help
-//config:	  Crond is a background daemon that parses individual crontab
-//config:	  files and executes commands on behalf of the users in question.
-//config:	  This is a port of dcron from slackware. It uses files of the
-//config:	  format /var/spool/cron/crontabs/<username> files, for example:
-//config:	      $ cat /var/spool/cron/crontabs/root
-//config:	      # Run daily cron jobs at 4:40 every day:
-//config:	      40 4 * * * /etc/cron/daily > /dev/null 2>&1
+//config:	Crond is a background daemon that parses individual crontab
+//config:	files and executes commands on behalf of the users in question.
+//config:	This is a port of dcron from slackware. It uses files of the
+//config:	format /var/spool/cron/crontabs/<username> files, for example:
+//config:		$ cat /var/spool/cron/crontabs/root
+//config:		# Run daily cron jobs at 4:40 every day:
+//config:		40 4 * * * /etc/cron/daily > /dev/null 2>&1
 //config:
 //config:config FEATURE_CROND_D
 //config:	bool "Support option -d to redirect output to stderr"
 //config:	depends on CROND
 //config:	default y
 //config:	help
-//config:	  -d N sets loglevel (0:most verbose) and directs all output to stderr.
+//config:	-d N sets loglevel (0:most verbose) and directs all output to stderr.
 //config:
 //config:config FEATURE_CROND_CALL_SENDMAIL
 //config:	bool "Report command output via email (using sendmail)"
 //config:	default y
 //config:	depends on CROND
 //config:	help
-//config:	  Command output will be sent to corresponding user via email.
+//config:	Command output will be sent to corresponding user via email.
 //config:
 //config:config FEATURE_CROND_SPECIAL_TIMES
 //config:	bool "Support special times (@reboot, @daily, etc) in crontabs"
 //config:	default y
 //config:	depends on CROND
 //config:	help
-//config:	  string        meaning
-//config:	  ------        -------
-//config:	  @reboot       Run once, at startup
-//config:	  @yearly       Run once a year:  "0 0 1 1 *"
-//config:	  @annually     Same as @yearly:  "0 0 1 1 *"
-//config:	  @monthly      Run once a month: "0 0 1 * *"
-//config:	  @weekly       Run once a week:  "0 0 * * 0"
-//config:	  @daily        Run once a day:   "0 0 * * *"
-//config:	  @midnight     Same as @daily:   "0 0 * * *"
-//config:	  @hourly       Run once an hour: "0 * * * *"
+//config:	string        meaning
+//config:	------        -------
+//config:	@reboot       Run once, at startup
+//config:	@yearly       Run once a year:  "0 0 1 1 *"
+//config:	@annually     Same as @yearly:  "0 0 1 1 *"
+//config:	@monthly      Run once a month: "0 0 1 * *"
+//config:	@weekly       Run once a week:  "0 0 * * 0"
+//config:	@daily        Run once a day:   "0 0 * * *"
+//config:	@midnight     Same as @daily:   "0 0 * * *"
+//config:	@hourly       Run once an hour: "0 * * * *"
 //config:
 //config:config FEATURE_CROND_DIR
 //config:	string "crond spool directory"
 //config:	default "/var/spool/cron"
 //config:	depends on CROND || CRONTAB
 //config:	help
-//config:	  Location of crond spool.
+//config:	Location of crond spool.
 
 //applet:IF_CROND(APPLET(crond, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/crontab.c b/miscutils/crontab.c
index 4093075..23cb548 100644
--- a/miscutils/crontab.c
+++ b/miscutils/crontab.c
@@ -13,10 +13,10 @@
 //config:	bool "crontab (9.7 kb)"
 //config:	default y
 //config:	help
-//config:	  Crontab manipulates the crontab for a particular user. Only
-//config:	  the superuser may specify a different user and/or crontab directory.
-//config:	  Note that Busybox binary must be setuid root for this applet to
-//config:	  work properly.
+//config:	Crontab manipulates the crontab for a particular user. Only
+//config:	the superuser may specify a different user and/or crontab directory.
+//config:	Note that Busybox binary must be setuid root for this applet to
+//config:	work properly.
 
 /* Needs to be run by root or be suid root - needs to change /var/spool/cron* files: */
 //applet:IF_CRONTAB(APPLET(crontab, BB_DIR_USR_BIN, BB_SUID_REQUIRE))
diff --git a/miscutils/dc.c b/miscutils/dc.c
index d4cd499..b922a71 100644
--- a/miscutils/dc.c
+++ b/miscutils/dc.c
@@ -6,16 +6,16 @@
 //config:	bool "dc (4.2 kb)"
 //config:	default y
 //config:	help
-//config:	  Dc is a reverse-polish desk calculator which supports unlimited
-//config:	  precision arithmetic.
+//config:	Dc is a reverse-polish desk calculator which supports unlimited
+//config:	precision arithmetic.
 //config:
 //config:config FEATURE_DC_LIBM
 //config:	bool "Enable power and exp functions (requires libm)"
 //config:	default y
 //config:	depends on DC
 //config:	help
-//config:	  Enable power and exp functions.
-//config:	  NOTE: This will require libm to be present for linking.
+//config:	Enable power and exp functions.
+//config:	NOTE: This will require libm to be present for linking.
 
 //applet:IF_DC(APPLET(dc, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/devfsd.c b/miscutils/devfsd.c
index 334f107..814714f 100644
--- a/miscutils/devfsd.c
+++ b/miscutils/devfsd.c
@@ -59,56 +59,55 @@
 //config:	select PLATFORM_LINUX
 //config:	select FEATURE_SYSLOG
 //config:	help
-//config:	  This is deprecated and should NOT be used anymore.
-//config:	  Use linux >= 2.6 (optionally with hotplug) and mdev instead!
-//config:	  See docs/mdev.txt for detailed instructions on how to use mdev
-//config:	  instead.
+//config:	This is deprecated and should NOT be used anymore.
+//config:	Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+//config:	See docs/mdev.txt for detailed instructions on how to use mdev
+//config:	instead.
 //config:
-//config:	  Provides compatibility with old device names on a devfs systems.
-//config:	  You should set it to true if you have devfs enabled.
-//config:	  The following keywords in devsfd.conf are supported:
-//config:	  "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
-//config:	  "PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
-//config:	  "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
+//config:	Provides compatibility with old device names on a devfs systems.
+//config:	You should set it to true if you have devfs enabled.
+//config:	The following keywords in devsfd.conf are supported:
+//config:	"CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
+//config:	"PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
+//config:	"MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".
 //config:
-//config:	  But only if they are written UPPERCASE!!!!!!!!
+//config:	But only if they are written UPPERCASE!!!!!!!!
 //config:
 //config:config DEVFSD_MODLOAD
 //config:	bool "Adds support for MODLOAD keyword in devsfd.conf"
 //config:	default y
 //config:	depends on DEVFSD
 //config:	help
-//config:	  This actually doesn't work with busybox modutils but needs
-//config:	  the external modutils.
+//config:	This actually doesn't work with busybox modutils but needs
+//config:	the external modutils.
 //config:
 //config:config DEVFSD_FG_NP
 //config:	bool "Enable the -fg and -np options"
 //config:	default y
 //config:	depends on DEVFSD
 //config:	help
-//config:	  -fg  Run the daemon in the foreground.
-//config:	  -np  Exit after parsing the configuration file.
-//config:	       Do not poll for events.
+//config:	-fg  Run the daemon in the foreground.
+//config:	-np  Exit after parsing config. Do not poll for events.
 //config:
 //config:config DEVFSD_VERBOSE
 //config:	bool "Increases logging (and size)"
 //config:	default y
 //config:	depends on DEVFSD
 //config:	help
-//config:	  Increases logging to stderr or syslog.
+//config:	Increases logging to stderr or syslog.
 //config:
 //config:config FEATURE_DEVFS
 //config:	bool "Use devfs names for all devices (obsolete)"
 //config:	default n
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  This is obsolete and should NOT be used anymore.
-//config:	  Use linux >= 2.6 (optionally with hotplug) and mdev instead!
+//config:	This is obsolete and should NOT be used anymore.
+//config:	Use linux >= 2.6 (optionally with hotplug) and mdev instead!
 //config:
-//config:	  For legacy systems -- if there is no way around devfsd -- this
-//config:	  tells busybox to look for names like /dev/loop/0 instead of
-//config:	  /dev/loop0. If your /dev directory has normal names instead of
-//config:	  devfs names, you don't want this.
+//config:	For legacy systems -- if there is no way around devfsd -- this
+//config:	tells busybox to look for names like /dev/loop/0 instead of
+//config:	/dev/loop0. If your /dev directory has normal names instead of
+//config:	devfs names, you don't want this.
 
 //applet:IF_DEVFSD(APPLET(devfsd, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/devmem.c b/miscutils/devmem.c
index ec911a7..6240547 100644
--- a/miscutils/devmem.c
+++ b/miscutils/devmem.c
@@ -7,8 +7,8 @@
 //config:	bool "devmem (2.5 kb)"
 //config:	default y
 //config:	help
-//config:	  devmem is a small program that reads and writes from physical
-//config:	  memory using /dev/mem.
+//config:	devmem is a small program that reads and writes from physical
+//config:	memory using /dev/mem.
 
 //applet:IF_DEVMEM(APPLET(devmem, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/fbsplash.c b/miscutils/fbsplash.c
index 4c891de..9ac91e0 100644
--- a/miscutils/fbsplash.c
+++ b/miscutils/fbsplash.c
@@ -25,20 +25,20 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Shows splash image and progress bar on framebuffer device.
-//config:	  Can be used during boot phase of an embedded device. ~2kb.
-//config:	  Usage:
-//config:	  - use kernel option 'vga=xxx' or otherwise enable fb device.
-//config:	  - put somewhere fbsplash.cfg file and an image in .ppm format.
-//config:	  - $ setsid fbsplash [params] &
+//config:	Shows splash image and progress bar on framebuffer device.
+//config:	Can be used during boot phase of an embedded device.
+//config:	Usage:
+//config:	- use kernel option 'vga=xxx' or otherwise enable fb device.
+//config:	- put somewhere fbsplash.cfg file and an image in .ppm format.
+//config:	- $ setsid fbsplash [params] &
 //config:	    -c: hide cursor
 //config:	    -d /dev/fbN: framebuffer device (if not /dev/fb0)
 //config:	    -s path_to_image_file (can be "-" for stdin)
 //config:	    -i path_to_cfg_file (can be "-" for stdin)
 //config:	    -f path_to_fifo (can be "-" for stdin)
-//config:	  - if you want to run it only in presence of kernel parameter:
+//config:	- if you want to run it only in presence of kernel parameter:
 //config:	    grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
-//config:	  - commands for fifo:
+//config:	- commands for fifo:
 //config:	    "NN" (ASCII decimal number) - percentage to show on progress bar
 //config:	    "exit" - well you guessed it
 
diff --git a/miscutils/flash_eraseall.c b/miscutils/flash_eraseall.c
index b64fda3..af9ebea 100644
--- a/miscutils/flash_eraseall.c
+++ b/miscutils/flash_eraseall.c
@@ -13,8 +13,8 @@
 //config:	bool "flash_eraseall (5.5 kb)"
 //config:	default n  # doesn't build on Ubuntu 8.04
 //config:	help
-//config:	  The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
-//config:	  This utility is used to erase the whole MTD device.
+//config:	The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
+//config:	This utility is used to erase the whole MTD device.
 
 //applet:IF_FLASH_ERASEALL(APPLET(flash_eraseall, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/flash_lock_unlock.c b/miscutils/flash_lock_unlock.c
index 00de3da..374eed5 100644
--- a/miscutils/flash_lock_unlock.c
+++ b/miscutils/flash_lock_unlock.c
@@ -7,15 +7,15 @@
 //config:	bool "flash_lock (2.1 kb)"
 //config:	default n  # doesn't build on Ubuntu 8.04
 //config:	help
-//config:	  The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
-//config:	  utility locks part or all of the flash device.
+//config:	The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
+//config:	utility locks part or all of the flash device.
 //config:
 //config:config FLASH_UNLOCK
 //config:	bool "flash_unlock (1.3 kb)"
 //config:	default n  # doesn't build on Ubuntu 8.04
 //config:	help
-//config:	  The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
-//config:	  utility unlocks part or all of the flash device.
+//config:	The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
+//config:	utility unlocks part or all of the flash device.
 
 //                       APPLET_ODDNAME:name          main               location         suid_type     help
 //applet:IF_FLASH_LOCK(  APPLET_ODDNAME(flash_lock,   flash_lock_unlock, BB_DIR_USR_SBIN, BB_SUID_DROP, flash_lock))
diff --git a/miscutils/flashcp.c b/miscutils/flashcp.c
index f6f61cf..d4ac62d 100644
--- a/miscutils/flashcp.c
+++ b/miscutils/flashcp.c
@@ -10,8 +10,8 @@
 //config:	bool "flashcp (5.4 kb)"
 //config:	default n  # doesn't build on Ubuntu 8.04
 //config:	help
-//config:	  The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
-//config:	  This utility is used to copy images into a MTD device.
+//config:	The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
+//config:	This utility is used to copy images into a MTD device.
 
 //applet:IF_FLASHCP(APPLET(flashcp, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/hdparm.c b/miscutils/hdparm.c
index af7fb99..0bbe6ca 100644
--- a/miscutils/hdparm.c
+++ b/miscutils/hdparm.c
@@ -16,58 +16,58 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Get/Set hard drive parameters. Primarily intended for ATA
-//config:	  drives.
+//config:	Get/Set hard drive parameters. Primarily intended for ATA
+//config:	drives.
 //config:
 //config:config FEATURE_HDPARM_GET_IDENTITY
 //config:	bool "Support obtaining detailed information directly from drives"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the -I and -i options to obtain detailed information
-//config:	  directly from drives about their capabilities and supported ATA
-//config:	  feature set. If no device name is specified, hdparm will read
-//config:	  identify data from stdin. Enabling this option will add about 16k...
+//config:	Enable the -I and -i options to obtain detailed information
+//config:	directly from drives about their capabilities and supported ATA
+//config:	feature set. If no device name is specified, hdparm will read
+//config:	identify data from stdin. Enabling this option will add about 16k...
 //config:
 //config:config FEATURE_HDPARM_HDIO_SCAN_HWIF
 //config:	bool "Register an IDE interface (DANGEROUS)"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the 'hdparm -R' option to register an IDE interface.
-//config:	  This is dangerous stuff, so you should probably say N.
+//config:	Enable the 'hdparm -R' option to register an IDE interface.
+//config:	This is dangerous stuff, so you should probably say N.
 //config:
 //config:config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
 //config:	bool "Un-register an IDE interface (DANGEROUS)"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the 'hdparm -U' option to un-register an IDE interface.
-//config:	  This is dangerous stuff, so you should probably say N.
+//config:	Enable the 'hdparm -U' option to un-register an IDE interface.
+//config:	This is dangerous stuff, so you should probably say N.
 //config:
 //config:config FEATURE_HDPARM_HDIO_DRIVE_RESET
 //config:	bool "Perform device reset (DANGEROUS)"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the 'hdparm -w' option to perform a device reset.
-//config:	  This is dangerous stuff, so you should probably say N.
+//config:	Enable the 'hdparm -w' option to perform a device reset.
+//config:	This is dangerous stuff, so you should probably say N.
 //config:
 //config:config FEATURE_HDPARM_HDIO_TRISTATE_HWIF
 //config:	bool "Tristate device for hotswap (DANGEROUS)"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the 'hdparm -x' option to tristate device for hotswap,
-//config:	  and the '-b' option to get/set bus state. This is dangerous
-//config:	  stuff, so you should probably say N.
+//config:	Enable the 'hdparm -x' option to tristate device for hotswap,
+//config:	and the '-b' option to get/set bus state. This is dangerous
+//config:	stuff, so you should probably say N.
 //config:
 //config:config FEATURE_HDPARM_HDIO_GETSET_DMA
 //config:	bool "Get/set using_dma flag"
 //config:	default y
 //config:	depends on HDPARM
 //config:	help
-//config:	  Enable the 'hdparm -d' option to get/set using_dma flag.
+//config:	Enable the 'hdparm -d' option to get/set using_dma flag.
 
 //applet:IF_HDPARM(APPLET(hdparm, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/i2c_tools.c b/miscutils/i2c_tools.c
index 5786139..ca2580e 100644
--- a/miscutils/i2c_tools.c
+++ b/miscutils/i2c_tools.c
@@ -14,28 +14,28 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Read from I2C/SMBus chip registers.
+//config:	Read from I2C/SMBus chip registers.
 //config:
 //config:config I2CSET
 //config:	bool "i2cset (6.9 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Set I2C registers.
+//config:	Set I2C registers.
 //config:
 //config:config I2CDUMP
 //config:	bool "i2cdump (7.2 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Examine I2C registers.
+//config:	Examine I2C registers.
 //config:
 //config:config I2CDETECT
 //config:	bool "i2cdetect (7.2 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Detect I2C chips.
+//config:	Detect I2C chips.
 //config:
 
 //applet:IF_I2CGET(APPLET(i2cget, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/inotifyd.c b/miscutils/inotifyd.c
index 2e0163e..0060797 100644
--- a/miscutils/inotifyd.c
+++ b/miscutils/inotifyd.c
@@ -30,8 +30,8 @@
 //config:	bool "inotifyd (3.5 kb)"
 //config:	default n  # doesn't build on Knoppix 5
 //config:	help
-//config:	  Simple inotify daemon. Reports filesystem changes. Requires
-//config:	  kernel >= 2.6.13
+//config:	Simple inotify daemon. Reports filesystem changes. Requires
+//config:	kernel >= 2.6.13
 
 //applet:IF_INOTIFYD(APPLET(inotifyd, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/less.c b/miscutils/less.c
index a4ef151..c1d5e1b 100644
--- a/miscutils/less.c
+++ b/miscutils/less.c
@@ -25,8 +25,8 @@
 //config:	bool "less (15 kb)"
 //config:	default y
 //config:	help
-//config:	  'less' is a pager, meaning that it displays text files. It possesses
-//config:	  a wide array of features, and is an improvement over 'more'.
+//config:	'less' is a pager, meaning that it displays text files. It possesses
+//config:	a wide array of features, and is an improvement over 'more'.
 //config:
 //config:config FEATURE_LESS_MAXLINES
 //config:	int "Max number of input lines less will try to eat"
@@ -38,64 +38,64 @@
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  This option adds the capability to search for matching left and right
-//config:	  brackets, facilitating programming.
+//config:	This option adds the capability to search for matching left and right
+//config:	brackets, facilitating programming.
 //config:
 //config:config FEATURE_LESS_FLAGS
 //config:	bool "Enable -m/-M"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  The -M/-m flag enables a more sophisticated status line.
+//config:	The -M/-m flag enables a more sophisticated status line.
 //config:
 //config:config FEATURE_LESS_TRUNCATE
 //config:	bool "Enable -S"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  The -S flag causes long lines to be truncated rather than
-//config:	  wrapped.
+//config:	The -S flag causes long lines to be truncated rather than
+//config:	wrapped.
 //config:
 //config:config FEATURE_LESS_MARKS
 //config:	bool "Enable marks"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  Marks enable positions in a file to be stored for easy reference.
+//config:	Marks enable positions in a file to be stored for easy reference.
 //config:
 //config:config FEATURE_LESS_REGEXP
 //config:	bool "Enable regular expressions"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  Enable regular expressions, allowing complex file searches.
+//config:	Enable regular expressions, allowing complex file searches.
 //config:
 //config:config FEATURE_LESS_WINCH
 //config:	bool "Enable automatic resizing on window size changes"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  Makes less track window size changes.
+//config:	Makes less track window size changes.
 //config:
 //config:config FEATURE_LESS_ASK_TERMINAL
 //config:	bool "Use 'tell me cursor position' ESC sequence to measure window"
 //config:	default y
 //config:	depends on FEATURE_LESS_WINCH
 //config:	help
-//config:	  Makes less track window size changes.
-//config:	  If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
-//config:	  this option makes less perform a last-ditch effort to find it:
-//config:	  position cursor to 999,999 and ask terminal to report real
-//config:	  cursor position using "ESC [ 6 n" escape sequence, then read stdin.
-//config:	  This is not clean but helps a lot on serial lines and such.
+//config:	Makes less track window size changes.
+//config:	If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
+//config:	this option makes less perform a last-ditch effort to find it:
+//config:	position cursor to 999,999 and ask terminal to report real
+//config:	cursor position using "ESC [ 6 n" escape sequence, then read stdin.
+//config:	This is not clean but helps a lot on serial lines and such.
 //config:
 //config:config FEATURE_LESS_DASHCMD
 //config:	bool "Enable flag changes ('-' command)"
 //config:	default y
 //config:	depends on LESS
 //config:	help
-//config:	  This enables the ability to change command-line flags within
-//config:	  less itself ('-' keyboard command).
+//config:	This enables the ability to change command-line flags within
+//config:	less itself ('-' keyboard command).
 //config:
 //config:config FEATURE_LESS_LINENUMS
 //config:	bool "Enable -N (dynamic switching of line numbers)"
diff --git a/miscutils/lsscsi.c b/miscutils/lsscsi.c
index 72fafef..b69ff1e 100644
--- a/miscutils/lsscsi.c
+++ b/miscutils/lsscsi.c
@@ -11,10 +11,10 @@
 //config:	default y
 //config:	#select PLATFORM_LINUX
 //config:	help
-//config:	  lsscsi is a utility for displaying information about SCSI buses in the
-//config:	  system and devices connected to them.
+//config:	lsscsi is a utility for displaying information about SCSI buses in the
+//config:	system and devices connected to them.
 //config:
-//config:	  This version uses sysfs (/sys/bus/scsi/devices) only.
+//config:	This version uses sysfs (/sys/bus/scsi/devices) only.
 
 //applet:IF_LSSCSI(APPLET(lsscsi, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/makedevs.c b/miscutils/makedevs.c
index 5f8593a..c2f86df 100644
--- a/miscutils/makedevs.c
+++ b/miscutils/makedevs.c
@@ -10,20 +10,20 @@
 //config:	bool "makedevs (9.3 kb)"
 //config:	default y
 //config:	help
-//config:	  'makedevs' is a utility used to create a batch of devices with
-//config:	  one command.
+//config:	'makedevs' is a utility used to create a batch of devices with
+//config:	one command.
 //config:
-//config:	  There are two choices for command line behaviour, the interface
-//config:	  as used by LEAF/Linux Router Project, or a device table file.
+//config:	There are two choices for command line behaviour, the interface
+//config:	as used by LEAF/Linux Router Project, or a device table file.
 //config:
-//config:	  'leaf' is traditionally what busybox follows, it allows multiple
-//config:	  devices of a particluar type to be created per command.
-//config:	  e.g. /dev/hda[0-9]
-//config:	  Device properties are passed as command line arguments.
+//config:	'leaf' is traditionally what busybox follows, it allows multiple
+//config:	devices of a particluar type to be created per command.
+//config:	e.g. /dev/hda[0-9]
+//config:	Device properties are passed as command line arguments.
 //config:
-//config:	  'table' reads device properties from a file or stdin, allowing
-//config:	  a batch of unrelated devices to be made with one command.
-//config:	  User/group names are allowed as an alternative to uid/gid.
+//config:	'table' reads device properties from a file or stdin, allowing
+//config:	a batch of unrelated devices to be made with one command.
+//config:	User/group names are allowed as an alternative to uid/gid.
 //config:
 //config:choice
 //config:	prompt "Choose makedevs behaviour"
diff --git a/miscutils/man.c b/miscutils/man.c
index de6ef19..a16202f 100644
--- a/miscutils/man.c
+++ b/miscutils/man.c
@@ -6,7 +6,7 @@
 //config:	bool "man (27 kb)"
 //config:	default y
 //config:	help
-//config:	  Format and display manual pages.
+//config:	Format and display manual pages.
 
 //applet:IF_MAN(APPLET(man, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/microcom.c b/miscutils/microcom.c
index 436509c..14b9f3b 100644
--- a/miscutils/microcom.c
+++ b/miscutils/microcom.c
@@ -11,7 +11,7 @@
 //config:	bool "microcom (5.6 kb)"
 //config:	default y
 //config:	help
-//config:	  The poor man's minicom utility for chatting with serial port devices.
+//config:	The poor man's minicom utility for chatting with serial port devices.
 
 //applet:IF_MICROCOM(APPLET(microcom, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/mt.c b/miscutils/mt.c
index aec7bf7..fad656e 100644
--- a/miscutils/mt.c
+++ b/miscutils/mt.c
@@ -6,9 +6,9 @@
 //config:	bool "mt (2.6 kb)"
 //config:	default y
 //config:	help
-//config:	  mt is used to control tape devices. You can use the mt utility
-//config:	  to advance or rewind a tape past a specified number of archive
-//config:	  files on the tape.
+//config:	mt is used to control tape devices. You can use the mt utility
+//config:	to advance or rewind a tape past a specified number of archive
+//config:	files on the tape.
 
 //applet:IF_MT(APPLET(mt, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/nandwrite.c b/miscutils/nandwrite.c
index 8659b49..14b1ed0 100644
--- a/miscutils/nandwrite.c
+++ b/miscutils/nandwrite.c
@@ -13,14 +13,14 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Write to the specified MTD device, with bad blocks awareness
+//config:	Write to the specified MTD device, with bad blocks awareness
 //config:
 //config:config NANDDUMP
 //config:	bool "nanddump (6.3 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Dump the content of raw NAND chip
+//config:	Dump the content of raw NAND chip
 
 //applet:IF_NANDWRITE(APPLET(nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP))
 //applet:IF_NANDDUMP(APPLET_ODDNAME(nanddump, nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP, nanddump))
diff --git a/miscutils/partprobe.c b/miscutils/partprobe.c
index 787def8..2c12a7d 100644
--- a/miscutils/partprobe.c
+++ b/miscutils/partprobe.c
@@ -9,7 +9,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Ask kernel to rescan partition table.
+//config:	Ask kernel to rescan partition table.
 
 //applet:IF_PARTPROBE(APPLET(partprobe, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/raidautorun.c b/miscutils/raidautorun.c
index 45e398e..ecedf9c 100644
--- a/miscutils/raidautorun.c
+++ b/miscutils/raidautorun.c
@@ -12,8 +12,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  raidautorun tells the kernel md driver to
-//config:	  search and start RAID arrays.
+//config:	raidautorun tells the kernel md driver to
+//config:	search and start RAID arrays.
 
 //applet:IF_RAIDAUTORUN(APPLET(raidautorun, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/readahead.c b/miscutils/readahead.c
index eb966b0..972302a 100644
--- a/miscutils/readahead.c
+++ b/miscutils/readahead.c
@@ -15,17 +15,17 @@
 //config:	depends on LFS
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Preload the files listed on the command line into RAM cache so that
-//config:	  subsequent reads on these files will not block on disk I/O.
+//config:	Preload the files listed on the command line into RAM cache so that
+//config:	subsequent reads on these files will not block on disk I/O.
 //config:
-//config:	  This applet just calls the readahead(2) system call on each file.
-//config:	  It is mainly useful in system startup scripts to preload files
-//config:	  or executables before they are used. When used at the right time
-//config:	  (in particular when a CPU bound process is running) it can
-//config:	  significantly speed up system startup.
+//config:	This applet just calls the readahead(2) system call on each file.
+//config:	It is mainly useful in system startup scripts to preload files
+//config:	or executables before they are used. When used at the right time
+//config:	(in particular when a CPU bound process is running) it can
+//config:	significantly speed up system startup.
 //config:
-//config:	  As readahead(2) blocks until each file has been read, it is best to
-//config:	  run this applet as a background job.
+//config:	As readahead(2) blocks until each file has been read, it is best to
+//config:	run this applet as a background job.
 
 //applet:IF_READAHEAD(APPLET(readahead, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/rfkill.c b/miscutils/rfkill.c
index 2c083b1..5469284 100644
--- a/miscutils/rfkill.c
+++ b/miscutils/rfkill.c
@@ -12,12 +12,12 @@
 //config:	default n # doesn't build on Ubuntu 9.04
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Enable/disable wireless devices.
+//config:	Enable/disable wireless devices.
 //config:
-//config:	  rfkill list : list all wireless devices
-//config:	  rfkill list bluetooth : list all bluetooth devices
-//config:	  rfkill list 1 : list device corresponding to the given index
-//config:	  rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
+//config:	rfkill list : list all wireless devices
+//config:	rfkill list bluetooth : list all bluetooth devices
+//config:	rfkill list 1 : list device corresponding to the given index
+//config:	rfkill block|unblock wlan : block/unblock all wlan(wifi) devices
 //config:
 
 //applet:IF_RFKILL(APPLET(rfkill, BB_DIR_USR_SBIN, BB_SUID_DROP))
diff --git a/miscutils/runlevel.c b/miscutils/runlevel.c
index 79fa3c8..6b47422 100644
--- a/miscutils/runlevel.c
+++ b/miscutils/runlevel.c
@@ -16,10 +16,10 @@
 //config:	default y
 //config:	depends on FEATURE_UTMP
 //config:	help
-//config:	  find the current and previous system runlevel.
+//config:	find the current and previous system runlevel.
 //config:
-//config:	  This applet uses utmp but does not rely on busybox supporing
-//config:	  utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
+//config:	This applet uses utmp but does not rely on busybox supporing
+//config:	utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
 
 //applet:IF_RUNLEVEL(APPLET(runlevel, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/rx.c b/miscutils/rx.c
index 3cf1784..874a3f0 100644
--- a/miscutils/rx.c
+++ b/miscutils/rx.c
@@ -19,7 +19,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Receive files using the Xmodem protocol.
+//config:	Receive files using the Xmodem protocol.
 
 //applet:IF_RX(APPLET(rx, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/setserial.c b/miscutils/setserial.c
index a609502..28a1bef 100644
--- a/miscutils/setserial.c
+++ b/miscutils/setserial.c
@@ -13,7 +13,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Retrieve or set Linux serial port.
+//config:	Retrieve or set Linux serial port.
 
 //applet:IF_SETSERIAL(APPLET(setserial, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/strings.c b/miscutils/strings.c
index 17c0470..ccb05f6 100644
--- a/miscutils/strings.c
+++ b/miscutils/strings.c
@@ -10,8 +10,8 @@
 //config:	bool "strings (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  strings prints the printable character sequences for each file
-//config:	  specified.
+//config:	strings prints the printable character sequences for each file
+//config:	specified.
 
 //applet:IF_STRINGS(APPLET(strings, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/time.c b/miscutils/time.c
index c443ef9..60fc11f 100644
--- a/miscutils/time.c
+++ b/miscutils/time.c
@@ -12,9 +12,9 @@
 //config:	bool "time (7 kb)"
 //config:	default y
 //config:	help
-//config:	  The time command runs the specified program with the given arguments.
-//config:	  When the command finishes, time writes a message to standard output
-//config:	  giving timing statistics about this program run.
+//config:	The time command runs the specified program with the given arguments.
+//config:	When the command finishes, time writes a message to standard output
+//config:	giving timing statistics about this program run.
 
 //applet:IF_TIME(APPLET(time, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/ttysize.c b/miscutils/ttysize.c
index a2eeb93..7f6a843 100644
--- a/miscutils/ttysize.c
+++ b/miscutils/ttysize.c
@@ -13,10 +13,10 @@
 //config:	bool "ttysize (372 bytes)"
 //config:	default y
 //config:	help
-//config:	  A replacement for "stty size". Unlike stty, can report only width,
-//config:	  only height, or both, in any order. It also does not complain on
-//config:	  error, but returns default 80x24.
-//config:	  Usage in shell scripts: width=`ttysize w`.
+//config:	A replacement for "stty size". Unlike stty, can report only width,
+//config:	only height, or both, in any order. It also does not complain on
+//config:	error, but returns default 80x24.
+//config:	Usage in shell scripts: width=`ttysize w`.
 
 //applet:IF_TTYSIZE(APPLET(ttysize, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/ubi_tools.c b/miscutils/ubi_tools.c
index 07f9a72..c6ba22a 100644
--- a/miscutils/ubi_tools.c
+++ b/miscutils/ubi_tools.c
@@ -8,42 +8,42 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Attach MTD device to an UBI device.
+//config:	Attach MTD device to an UBI device.
 //config:
 //config:config UBIDETACH
 //config:	bool "ubidetach (4.6 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Detach MTD device from an UBI device.
+//config:	Detach MTD device from an UBI device.
 //config:
 //config:config UBIMKVOL
 //config:	bool "ubimkvol (5.8 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Create a UBI volume.
+//config:	Create a UBI volume.
 //config:
 //config:config UBIRMVOL
 //config:	bool "ubirmvol (5.2 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Delete a UBI volume.
+//config:	Delete a UBI volume.
 //config:
 //config:config UBIRSVOL
 //config:	bool "ubirsvol (4.6 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Resize a UBI volume.
+//config:	Resize a UBI volume.
 //config:
 //config:config UBIUPDATEVOL
 //config:	bool "ubiupdatevol (5.6 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Update a UBI volume.
+//config:	Update a UBI volume.
 
 //                       APPLET_ODDNAME:name       main       location         suid_type     help
 //applet:IF_UBIATTACH(   APPLET_ODDNAME(ubiattach, ubi_tools, BB_DIR_USR_SBIN, BB_SUID_DROP, ubiattach))
diff --git a/miscutils/ubirename.c b/miscutils/ubirename.c
index 8fb42ee..786c4b9 100644
--- a/miscutils/ubirename.c
+++ b/miscutils/ubirename.c
@@ -11,7 +11,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Utility to rename UBI volumes
+//config:	Utility to rename UBI volumes
 
 //applet:IF_UBIRENAME(APPLET(ubirename, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/miscutils/volname.c b/miscutils/volname.c
index d80787f..6e6bbaa 100644
--- a/miscutils/volname.c
+++ b/miscutils/volname.c
@@ -31,7 +31,7 @@
 //config:	bool "volname (1.7 kb)"
 //config:	default y
 //config:	help
-//config:	  Prints a CD-ROM volume name.
+//config:	Prints a CD-ROM volume name.
 
 //applet:IF_VOLNAME(APPLET(volname, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/miscutils/watchdog.c b/miscutils/watchdog.c
index 2ef4997..ec06bcb 100644
--- a/miscutils/watchdog.c
+++ b/miscutils/watchdog.c
@@ -13,12 +13,12 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The watchdog utility is used with hardware or software watchdog
-//config:	  device drivers. It opens the specified watchdog device special file
-//config:	  and periodically writes a magic character to the device. If the
-//config:	  watchdog applet ever fails to write the magic character within a
-//config:	  certain amount of time, the watchdog device assumes the system has
-//config:	  hung, and will cause the hardware to reboot.
+//config:	The watchdog utility is used with hardware or software watchdog
+//config:	device drivers. It opens the specified watchdog device special file
+//config:	and periodically writes a magic character to the device. If the
+//config:	watchdog applet ever fails to write the magic character within a
+//config:	certain amount of time, the watchdog device assumes the system has
+//config:	hung, and will cause the hardware to reboot.
 
 //applet:IF_WATCHDOG(APPLET(watchdog, BB_DIR_SBIN, BB_SUID_DROP))