Latest dash update from vodz

2 files changed, 1 insertions, 376 deletions

diff --git a/libbb/Makefile.in b/libbb/Makefile.in
index b60adc9..0d7103e 100644
--- a/libbb/Makefile.in
+++ b/libbb/Makefile.in
@@ -24,7 +24,7 @@ LIBBB_DIR:=$(TOPDIR)libbb/
 endif
 
 LIBBB_SRC:= \
-	arith.c bb_asprintf.c ask_confirmation.c change_identity.c chomp.c \
+	bb_asprintf.c ask_confirmation.c change_identity.c chomp.c \
 	compare_string_array.c concat_path_file.c copy_file.c \
 	copyfd.c correct_password.c create_icmp_socket.c \
 	create_icmp6_socket.c device_open.c dump.c error_msg.c \
diff --git a/libbb/arith.c b/libbb/arith.c
deleted file mode 100644
index 3e10712..0000000
--- a/libbb/arith.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/* Copyright (c) 2001 Aaron Lehmann <aaronl@vitelus.com>
-   
-   Permission is hereby granted, free of charge, to any person obtaining
-   a copy of this software and associated documentation files (the
-   "Software"), to deal in the Software without restriction, including
-   without limitation the rights to use, copy, modify, merge, publish,
-   distribute, sublicense, and/or sell copies of the Software, and to
-   permit persons to whom the Software is furnished to do so, subject to
-   the following conditions:
-   
-   The above copyright notice and this permission notice shall be
-   included in all copies or substantial portions of the Software.
-   
-   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-*/
-
-/* This is my infix parser/evaluator. It is optimized for size, intended
- * as a replacement for yacc-based parsers. However, it may well be faster
- * than a comparable parser writen in yacc. The supported operators are
- * listed in #defines below. Parens, order of operations, and error handling
- * are supported. This code is threadsafe. The exact expression format should
- * be that which POSIX specifies for shells. */
-
-/* The code uses a simple two-stack algorithm. See
- * http://www.onthenet.com.au/~grahamis/int2008/week02/lect02.html
- * for a detailed explaination of the infix-to-postfix algorithm on which
- * this is based (this code differs in that it applies operators immediately
- * to the stack instead of adding them to a queue to end up with an
- * expression). */
-
-/* To use the routine, call it with an expression string and error return
- * pointer */
-
-/*
- * Aug 24, 2001              Manuel Novoa III
- *
- * Reduced the generated code size by about 30% (i386) and fixed several bugs.
- *
- * 1) In arith_apply():
- *    a) Cached values of *numptr and &(numptr[-1]).
- *    b) Removed redundant test for zero denominator.
- *
- * 2) In arith():
- *    a) Eliminated redundant code for processing operator tokens by moving
- *       to a table-based implementation.  Also folded handling of parens
- *       into the table.
- *    b) Combined all 3 loops which called arith_apply to reduce generated
- *       code size at the cost of speed.
- *
- * 3) The following expressions were treated as valid by the original code:
- *       1()  ,    0!  ,    1 ( *3 )   .
- *    These bugs have been fixed by internally enclosing the expression in
- *    parens and then checking that all binary ops and right parens are
- *    preceded by a valid expression (NUM_TOKEN).
- *
- * Note: It may be desireable to replace Aaron's test for whitespace with
- * ctype's isspace() if it is used by another busybox applet or if additional
- * whitespace chars should be considered.  Look below the "#include"s for a
- * precompiler test.
- */
-
-/*
- * Aug 26, 2001              Manuel Novoa III
- *
- * Return 0 for null expressions.  Pointed out by vodz.
- *
- * Merge in Aaron's comments previously posted to the busybox list,
- * modified slightly to take account of my changes to the code.
- *
- * TODO: May want to allow access to variables in the arith code.
- *       This would:
- *       1) allow us to evaluate $A as 0 if A isn't set (although this
- *          would require changes to ash.c too).
- *       2) allow us to write expressions as $(( A + 2 )).
- *       This could be done using a callback function passed to the
- *       arith() function of by requiring such a function with fixed
- *       name as an extern.
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include "libbb.h"
-
-/* 
- * Use "#if 1" below for Aaron's original test for whitespace.
- * Use "#if 0" for ctype's isspace().
- * */
-#if 1
-#undef isspace
-#define isspace(arithval) \
-	(arithval == ' ' || arithval == '\n' || arithval == '\t')
-#endif
-
-typedef char operator;
-
-/* An operator's token id is a bit of a bitfield. The lower 5 bits are the
- * precedence, and high 3 are an ID unique accross operators of that
- * precedence. The ID portion is so that multiple operators can have the
- * same precedence, ensuring that the leftmost one is evaluated first.
- * Consider * and /. */
-
-#define tok_decl(prec,id) (((id)<<5)|(prec))
-#define PREC(op) ((op)&0x1F)
-
-#define TOK_LPAREN tok_decl(0,0)
-
-#define TOK_OR tok_decl(1,0)
-
-#define TOK_AND tok_decl(2,0)
-
-#define TOK_BOR tok_decl(3,0)
-
-#define TOK_BXOR tok_decl(4,0)
-
-#define TOK_BAND tok_decl(5,0)
-
-#define TOK_EQ tok_decl(6,0)
-#define TOK_NE tok_decl(6,1)
-
-#define TOK_LT tok_decl(7,0)
-#define TOK_GT tok_decl(7,1)
-#define TOK_GE tok_decl(7,2)
-#define TOK_LE tok_decl(7,3)
-
-#define TOK_LSHIFT tok_decl(8,0)
-#define TOK_RSHIFT tok_decl(8,1)
-
-#define TOK_ADD tok_decl(9,0)
-#define TOK_SUB tok_decl(9,1)
-
-#define TOK_MUL tok_decl(10,0)
-#define TOK_DIV tok_decl(10,1)
-#define TOK_REM tok_decl(10,2)
-
-/* For now all unary operators have the same precedence, and that's used to
- * identify them as unary operators */
-#define UNARYPREC 14
-#define TOK_BNOT tok_decl(UNARYPREC,0)
-#define TOK_NOT tok_decl(UNARYPREC,1)
-#define TOK_UMINUS tok_decl(UNARYPREC,2)
-#define TOK_UPLUS tok_decl(UNARYPREC,3)
-
-#define TOK_NUM tok_decl(15,0)
-#define TOK_RPAREN tok_decl(15,1)
-#define TOK_ERROR  tok_decl(15,2)	/* just a place-holder really */
-
-#define ARITH_APPLY(op) arith_apply(op, numstack, &numstackptr)
-#define NUMPTR (*numstackptr)
-
-/* "applying" a token means performing it on the top elements on the integer
- * stack. For a unary operator it will only change the top element, but a
- * binary operator will pop two arguments and push a result */
-static short arith_apply(operator    op, long *numstack, long **numstackptr)
-{
-	long numptr_val;
-	long *NUMPTR_M1;
-
-	if (NUMPTR == numstack) goto err; /* There is no operator that can work
-										 without arguments */
-	NUMPTR_M1 = NUMPTR - 1;
-	if (op == TOK_UMINUS)
-		*NUMPTR_M1 *= -1;
-	else if (op == TOK_NOT)
-		*NUMPTR_M1 = !(*NUMPTR_M1);
-	else if (op == TOK_BNOT)
-		*NUMPTR_M1 = ~(*NUMPTR_M1);
-	else if (op != TOK_UPLUS) {
-		/* Binary operators */
-	if (NUMPTR_M1 == numstack) goto err; /* ... and binary operators need two
-										   arguments */
-	numptr_val = *--NUMPTR;         /* ... and they pop one */
-		NUMPTR_M1 = NUMPTR - 1;
-	if (op == TOK_BOR)
-			*NUMPTR_M1 |= numptr_val;
-	else if (op == TOK_OR)
-			*NUMPTR_M1 = numptr_val || *NUMPTR_M1;
-	else if (op == TOK_BAND)
-			*NUMPTR_M1 &= numptr_val;
-	else if (op == TOK_AND)
-			*NUMPTR_M1 = *NUMPTR_M1 && numptr_val;
-	else if (op == TOK_EQ)
-			*NUMPTR_M1 = (*NUMPTR_M1 == numptr_val);
-	else if (op == TOK_NE)
-			*NUMPTR_M1 = (*NUMPTR_M1 != numptr_val);
-	else if (op == TOK_GE)
-			*NUMPTR_M1 = (*NUMPTR_M1 >= numptr_val);
-	else if (op == TOK_RSHIFT)
-			*NUMPTR_M1 >>= numptr_val;
-	else if (op == TOK_LSHIFT)
-			*NUMPTR_M1 <<= numptr_val;
-	else if (op == TOK_GT)
-			*NUMPTR_M1 = (*NUMPTR_M1 > numptr_val);
-	else if (op == TOK_LT)
-			*NUMPTR_M1 = (*NUMPTR_M1 < numptr_val);
-	else if (op == TOK_LE)
-			*NUMPTR_M1 = (*NUMPTR_M1 <= numptr_val);
-	else if (op == TOK_MUL)
-			*NUMPTR_M1 *= numptr_val;
-	else if (op == TOK_ADD)
-			*NUMPTR_M1 += numptr_val;
-	else if (op == TOK_SUB)
-			*NUMPTR_M1 -= numptr_val;
-	else if(numptr_val==0)          /* zero divisor check */
-			return -2;
-	else if (op == TOK_DIV)
-			*NUMPTR_M1 /= numptr_val;
-	else if (op == TOK_REM)
-			*NUMPTR_M1 %= numptr_val;
-		/* WARNING!!!  WARNING!!!  WARNING!!! */
-		/* Any new operators should be added BEFORE the zero divisor check! */
-	}
-	return 0;
-err: return(-1);
-}
-
-static const char endexpression[] = ")";
-
-/* + and - (in that order) must be last */
-static const char op_char[] = "!<>=|&*/%~()+-";
-static const char op_token[] = {
-	/* paired with equal */
-	TOK_NE, TOK_LE, TOK_GE,
-	/* paired with self -- note: ! is special-cased below*/
-	TOK_ERROR, TOK_LSHIFT, TOK_RSHIFT, TOK_EQ, TOK_OR, TOK_AND,
-	/* singles */
-	TOK_NOT, TOK_LT, TOK_GT, TOK_ERROR, TOK_BOR, TOK_BAND,
-	TOK_MUL, TOK_DIV, TOK_REM, TOK_BNOT, TOK_LPAREN, TOK_RPAREN,
-	TOK_ADD, TOK_SUB, TOK_UPLUS, TOK_UMINUS
-};
-
-#define NUM_PAIR_EQUAL  3
-#define NUM_PAIR_SAME   6
-
-extern long arith (const char *expr, int *errcode)
-{
-	register char arithval;	/* Current character under analysis */
-	operator    lasttok, op;
-	unsigned char prec;
-
-	const char *p = endexpression;
-
-	size_t datasizes = strlen(expr) + 2;
-
-	/* Stack of integers */
-	/* The proof that there can be no more than strlen(startbuf)/2+1 integers
-	 * in any given correct or incorrect expression is left as an excersize to
-	 * the reader. */
-	long *numstack = alloca(((datasizes)/2)*sizeof(long)),
-		*numstackptr = numstack;
-	/* Stack of operator tokens */
-	operator *stack = alloca((datasizes) * sizeof(operator)),
-		*stackptr = stack;
-
-	*numstack = 0;
-	*stackptr++ = lasttok = TOK_LPAREN;     /* start off with a left paren */
-
-  loop:
-	if ((arithval = *expr) == 0) {
-		if (p == endexpression) { /* Null expression. */
-			*errcode = 0;
-			return *numstack;
-		}
-
-		/* This is only reached after all tokens have been extracted from the
-		 * input stream. If there are still tokens on the operator stack, they
-		 * are to be applied in order. At the end, there should be a final
-		 * result on the integer stack */
-
-		if (expr != endexpression + 1) {	/* If we haven't done so already, */
-			expr = endexpression;	/* append a closing right paren */
-			goto loop;	/* and let the loop process it. */
-		}
-		/* At this point, we're done with the expression. */
-		if (numstackptr != numstack+1) {/* ... but if there isn't, it's bad */
-		  err:
-			return (*errcode = -1);
-			/* NOTREACHED */
-		}
-		return *numstack;
-	} else {
-		/* Continue processing the expression.  */
-		if (isspace(arithval)) {
-			goto prologue;          /* Skip whitespace */
-		}
-		if ((unsigned)arithval-'0' <= 9) /* isdigit */ {
-			*numstackptr++ = strtol(expr, (char **) &expr, 10);
-			lasttok = TOK_NUM;
-			goto loop;
-		}
-#if 1
-		if ((p = strchr(op_char, arithval)) == NULL) {
-			goto err;
-		}
-#else
-	    for ( p=op_char ; *p != arithval ; p++ ) {
-			if (!*p) {
-				goto err;
-			}
-		}
-#endif
-		p = op_token + (int)(p - op_char);
-		++expr;
-		if ((p >= op_token + NUM_PAIR_EQUAL) || (*expr != '=')) {
-			p += NUM_PAIR_EQUAL;
-			if ((p >= op_token + NUM_PAIR_SAME + NUM_PAIR_EQUAL)
-				|| (*expr != arithval) || (arithval == '!')) {
-				--expr;
-				if (arithval == '=') { /* single = */
-					goto err;
-				}
-				p += NUM_PAIR_SAME;
-				/* Plus and minus are binary (not unary) _only_ if the last
-				 * token was as number, or a right paren (which pretends to be
-				 * a number, since it evaluates to one). Think about it.
-				 * It makes sense. */
-				if ((lasttok != TOK_NUM)
-					&& (p >= op_token + NUM_PAIR_SAME + NUM_PAIR_EQUAL
-						+ sizeof(op_char) - 2)) {
-					p += 2; /* Unary plus or minus */
-				}
-			}
-		}
-		op = *p;
-
-		/* We don't want a unary operator to cause recursive descent on the
-		 * stack, because there can be many in a row and it could cause an
-		 * operator to be evaluated before its argument is pushed onto the
-		 * integer stack. */
-		/* But for binary operators, "apply" everything on the operator
-		 * stack until we find an operator with a lesser priority than the
-		 * one we have just extracted. */
-		/* Left paren is given the lowest priority so it will never be
-		 * "applied" in this way */
-		prec = PREC(op);
-		if ((prec > 0) && (prec != UNARYPREC)) { /* not left paren or unary */
-			if (lasttok != TOK_NUM) { /* binary op must be preceded by a num */
-				goto err;
-			}
-			while (stackptr != stack) {
-				if (op == TOK_RPAREN) {
-					/* The algorithm employed here is simple: while we don't
-					 * hit an open paren nor the bottom of the stack, pop
-					 * tokens and apply them */
-					if (stackptr[-1] == TOK_LPAREN) {
-						--stackptr;
-						lasttok = TOK_NUM; /* Any operator directly after a */
-						/* close paren should consider itself binary */
-						goto prologue;
-					}
-				} else if (PREC(stackptr[-1]) < prec) {
-					break;
-				}
-				*errcode = ARITH_APPLY(*--stackptr);
-				if(*errcode) return *errcode;
-			}
-			if (op == TOK_RPAREN) {
-				goto err;
-			}
-		}
-
-		/* Push this operator to the stack and remember it. */
-		*stackptr++ = lasttok = op;
-
-	  prologue:
-		++expr;
-		goto loop;
-	}
-}