| Age | Commit message (Collapse) | Author |
|---|
|
If logging to stderr and/or syslog the -v option can be given one or
more times to increase the log verbosity. If mdev is used as hotplug
helper the log level is fixed set to 2 if mdev.log is found an appended
because there is no possiblity to pass arguments to the hotplug helper.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
If mdev is run as daemon it should be possible to forward the debug
messages to syslog. This feature might be useful if mdev is run with -s
during boot too. OTOH it makes no sense for the daemon to log to
mdev.log. This can be handled by a syslog daemon way better. If the
daemon stays in the foreground due to -f, the messages are still written
to stderr as before.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
If the netlink read() failed with ENOBUFS we know that we have missed at
least one message due to a socket receive buffer overrun. The only way
how to recover is to drop the old socket, open a fresh one and make a
cold-plug scan of the current system state.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The socket receive buffer turned out to be too small for real world
systems. Use the same size as udevd to be on the safe side. As this is
just a limit and the memory is not allocated by the kernel until really
needed there is actually no memory wasted.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
volume_id_probe_xfs 101 98 -3
volume_id_probe_vfat 827 824 -3
volume_id_probe_udf 541 538 -3
volume_id_probe_ubifs 67 64 -3
volume_id_probe_squashfs 86 83 -3
volume_id_probe_romfs 97 94 -3
volume_id_probe_reiserfs 246 243 -3
volume_id_probe_ocfs2 110 107 -3
volume_id_probe_ntfs 288 285 -3
volume_id_probe_nilfs 100 97 -3
volume_id_probe_minix 85 82 -3
volume_id_probe_luks 92 89 -3
volume_id_probe_linux_swap 251 248 -3
volume_id_probe_linux_raid 131 128 -3
volume_id_probe_lfs 62 59 -3
volume_id_probe_jfs 110 107 -3
volume_id_probe_iso9660 318 315 -3
volume_id_probe_f2fs 107 104 -3
volume_id_probe_exfat 285 282 -3
volume_id_probe_erofs 89 86 -3
volume_id_probe_cramfs 67 64 -3
volume_id_probe_btrfs 134 131 -3
volume_id_probe_bcache 107 104 -3
volume_id_probe_sysv 194 188 -6
volume_id_probe_hfs_hfsplus 518 512 -6
add_to_uuid_cache 271 265 -6
volume_id_probe_ext 131 122 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/27 up/down: 0/-96) Total: -96 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Add erofs to the known volume_ids.
function old new delta
volume_id_probe_erofs - 89 +89
fs1 24 28 +4
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 1/0 up/down: 93/0) Total: 93 bytes
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
musl "implements" several sched_xxx() functions by returning ENOSYS. As
an alternative, either pthread_(g|s)etschedparam() or direct syscalls
can be used.
References: https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/schedutils/chrt.c?id=fcc3078754291d2f5121797eb91b364f8e24b2f1
References: http://git.musl-libc.org/cgit/musl/commit/src/sched/sched_setscheduler.c?id=1e21e78bf7a5c24c217446d8760be7b7188711c2
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
xxd_main 466 680 +214
packed_usage 33474 33483 +9
hexdump_opts 17 16 -1
hexdump_main 565 401 -164
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 223/-165) Total: 58 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_dump_dump 1497 1523 +26
xxd_main 459 466 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 33/0) Total: 33 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_str2optset 616 650 +34
setpriv_main 950 975 +25
switch_root_main 688 706 +18
parse 958 970 +12
getopt_main 622 628 +6
parse_resolvconf 302 306 +4
mpstat_main 1139 1142 +3
static.p 4 - -4
cdcmd 717 702 -15
strtok 148 - -148
------------------------------------------------------------------------------
(add/remove: 0/3 grow/shrink: 7/1 up/down: 102/-167) Total: -65 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
recursive_action1 - 316 +316
file_action_grep 161 164 +3
add_to_prg_cache_if_socket 202 205 +3
depmod_main 509 511 +2
writeFileToTarball 488 489 +1
parse_module 281 282 +1
fileAction 207 208 +1
act 189 190 +1
add_to_dirlist 65 64 -1
writeTarFile 196 194 -2
uuidcache_init 47 45 -2
uuidcache_check_device 109 107 -2
true_action 8 6 -2
run_parts_main 310 308 -2
netstat_main 534 532 -2
lsusb_main 29 27 -2
lspci_main 45 43 -2
initial_scan 138 136 -2
grep_main 845 843 -2
find_main 482 480 -2
config_file_action 437 435 -2
chmod_main 142 140 -2
dirAction 14 10 -4
diff_main 1544 1540 -4
chown_main 154 148 -6
skip_dir 136 129 -7
dir_act 191 184 -7
recursive_action 453 69 -384
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 7/20 up/down: 328/-439) Total: -111 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Starting with linux kernel v5.4 squashfs has a more strict parameter
checking implemented. Unlike util-linux mount, busybox never supported
the sizelimit option but simply forwards it to the kernel.
Since v5.4 mounting will fail with
squashfs: Unknown parameter 'sizelimit'
Support the sizelimit parameter by setting it in the LOOP_SET_STATUS64
structure before handing it to the kernel.
While at it also add support for the offset option, which currently will
always be set to 0.
function old new delta
cut_out_ull_opt - 167 +167
singlemount 1230 1266 +36
set_loop 834 862 +28
losetup_main 479 483 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 235/0) Total: 235 bytes
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The glibc implementation changed for settimeofday, resulting in "invalid
argument" error when attempting to set both timezone and time with a single
call. Fix this by calling settimeofday twice
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
taskset_main 986 987 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
taskset_main 925 986 +61
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
taskset_main 511 855 +344
Based on patch by Fryderyk Wrobel <frd1996@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
list_disk_geometry 175 145 -30
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_free_loop - 58 +58
set_loop 597 649 +52
losetup_main 482 476 -6
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 110/-6) Total: 104 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
create_and_bind_to_netlink - 134 +134
ifplugd_main 1117 1052 -65
uevent_main 399 306 -93
mdev_main 314 215 -99
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 134/-257) Total: -123 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Adds the -d option to run mdev in daemon mode handling hotplug events
from the kernel like udev. If the system generates many hotplug events
this mode of operation will consume less resources than registering
mdev as hotplug helper or using the uevent applet.
function old new delta
daemon_loop - 152 +152
initial_scan - 127 +127
open_mdev_log - 85 +85
mdev_main 255 314 +59
packed_usage 33284 33316 +32
process_action 1051 992 -59
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/1 up/down: 455/-59) Total: 396 bytes
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
process_action - 1051 +1051
mdev_main 1324 255 -1069
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 1051/-1069) Total: -18 bytes
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This purely moves code from main() to separate functions for better
extensibility.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Add -P option from util-linux losetup to scan for partitions.
function old new delta
losetup_main 449 482 +33
packed_usage 33264 33292 +28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 61/0) Total: 61 bytes
Signed-off-by: Jack O'Sullivan <jackos1998@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
losetup_main 422 449 +27
packed_usage 33243 33264 +21
get_next_block 1677 1681 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 52/0) Total: 52 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
While at it, improve help text
function old new delta
packed_usage 33319 33344 +25
policy_name - 22 +22
show_min_max 59 64 +5
chrt_main 432 429 -3
policies 72 - -72
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 2/1 up/down: 52/-75) Total: -23 bytes
text data bss dec hex filename
982150 485 7296 989931 f1aeb busybox_old
982183 485 7296 989964 f1b0c busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bdcmd_names - 82 +82
bdcmd_ioctl - 44 +44
bdcmd_flags - 11 +11
blockdev_main 273 258 -15
bdcommands 176 - -176
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 0/1 up/down: 137/-191) Total: -54 bytes
text data bss dec hex filename
982326 485 7296 990107 f1b9b busybox_old
982272 485 7296 990053 f1b65 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
cluster_count is compared against FAT16_MAX, which is defined as 0xfff4
That is the maximum number of cluster a FAT16 can have.
For reference also check the hardware whitepaper from Microsoft
FAT: General Overview of On-Disk Format, version 1.03 page 15
Signed-off-by: Thomas Frauendorfer <tf@miray.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
BusyBox has support for embedded shell scripts. Two types can be
distinguished: custom scripts and scripts implementing applets.
Custom scripts should be placed in the 'embed' directory at build
time. They are given a default applet configuration and appear
as applets to the user but no further configuration is possible.
Applet scripts are integrated with the BusyBox build system and
are intended to be used to ship standard applets that just happen
to be implemented as scripts. They can be configured at build time
and appear just like native applets.
Such scripts should be placed in the 'applets_sh' directory. A stub
C program should be written to provide the usual applet configuration
details and placed in a suitable subsystem directory. It may be
helpful to have a configuration option to enable any dependencies the
script requires: see the 'nologin' applet for an example.
function old new delta
scripted_main - 41 +41
applet_names 2773 2781 +8
applet_main 1600 1604 +4
i2cdetect_main 672 674 +2
applet_suid 100 101 +1
applet_install_loc 200 201 +1
applet_flags 100 101 +1
packed_usage 33180 33179 -1
tryexec 159 152 -7
evalcommand 1661 1653 -8
script_names 9 - -9
packed_scripts 123 114 -9
complete_cmd_dir_file 826 811 -15
shellexec 271 254 -17
find_command 1007 990 -17
busybox_main 642 624 -18
run_applet_and_exit 100 78 -22
find_script_by_name 51 - -51
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes
text data bss dec hex filename
950034 477 7296 957807 e9d6f busybox_old
949918 477 7296 957691 e9cfb busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unzip_main 2726 2792 +66
printable_string2 - 57 +57
identify 4329 4336 +7
expmeta 659 663 +4
add_interface 99 103 +4
beep_main 286 289 +3
changepath 192 194 +2
builtin_type 115 117 +2
devmem_main 469 470 +1
input_tab 1076 1074 -2
create_J 1821 1819 -2
poplocalvars 314 311 -3
doCommands 2222 2214 -8
do_load 918 902 -16
printable_string 57 9 -48
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 8/6 up/down: 146/-79) Total: 67 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_nonexisting_partition 119 104 -15
fdisk_main 2640 2622 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-33) Total: -33 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
