summaryrefslogtreecommitdiff
path: root/shell
AgeCommit message (Collapse)Author
2016-09-28ash: eval: Return status in eval functionsDenys Vlasenko
Backported from dash: eval: Return status in eval functions The exit status is currently clobbered too early for case statements and loops. This patch fixes it by making the eval functions return the current exit status and setting them in one place -- evaltree. Harald van Dijk pointed out a number of bugs in the original patch. function old new delta evalcommand 1226 1242 +16 cmdloop 383 398 +15 evalfor 223 227 +4 evalcase 271 275 +4 localcmd 348 350 +2 evaltreenr 927 928 +1 evaltree 927 928 +1 evalsubshell 150 151 +1 evalpipe 356 357 +1 parse_command 1585 1584 -1 evalloop 177 164 -13 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 9/2 up/down: 45/-14) Total: 31 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-25ash: in heredoc code, fix access past the end of allocated memory. Closes 9276Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-25ash: fix handling of NULs in $'abc\000def\x00asd'. Closes 9286Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-21ash: use glob() from libcDenys Vlasenko
Adapted from dash. The "homegrown" glob code is retained (ifdef'ed out). This changes was inspired by bug 9261, which detected out-of bounds use of heap for 2098 byte long name in the "homegrown" code. This is still not fixed... function old new delta expandarg 960 982 +22 static.syntax_index_table 26 25 -1 static.spec_symbls 27 26 -1 static.metachars 4 - -4 addfname 42 - -42 msort 126 - -126 expmeta 528 - -528 ------------------------------------------------------------------------------ (add/remove: 0/4 grow/shrink: 1/2 up/down: 22/-702) Total: -680 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20ash: fix handling of bashism $'xxx' with high-bit chars. Closes 9236Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-20hush: document better where bad redirect syntax is detectedDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17ash: exit after subshell error when errexit option is setRostislav Skudnov
When "set -e" option is on, shell must exit when any command fails, including compound commands of the form (compound-list) executed in a subshell. Bash and dash shells have this behaviour. Also add a corresponding testcase. Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17fix "aloc" -> "alloc" typosDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-17ash: add a FIXME for bug 9246Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-01*: placate some compile warnings on OSXDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-22hush: fix "redirects can close script fd" bugDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-20hush: do not leak script fds into NOEXEC childrenDenys Vlasenko
We set all opened script fds to CLOEXEC, thus making then go away after fork+exec. Unfortunately, CLOFORK does not exist. NOEXEC children will still see those fds open. For one, "ls" applet is NOEXEC. Therefore running "ls -l /proc/self/fd" in a script from standalone shell shows this: lrwx------ 1 root root 64 Aug 20 15:17 0 -> /dev/pts/3 lrwx------ 1 root root 64 Aug 20 15:17 1 -> /dev/pts/3 lrwx------ 1 root root 64 Aug 20 15:17 2 -> /dev/pts/3 lr-x------ 1 root root 64 Aug 20 15:17 3 -> /path/to/top/level/script lr-x------ 1 root root 64 Aug 20 15:17 4 -> /path/to/sourced/SCRIPT1 ... with as many open fds as there are ". SCRIPTn" nest levels. Fix it by closing these fds after fork (only for NOEXEC children). Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-20hush: bit better comments in redirect code. No logic changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-19hush: `cmd` and arithmetic also need the fix for FILE rewindDenys Vlasenko
Discovered by running testsuite with a newest glibc Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-19hush: fix a bug in FEATURE_SH_STANDALONE=y config. Closes 9186Denys Vlasenko
Run this in a "sh SCRIPT": sha256sum /dev/null echo END sha256sum is a NOEXEC applet. It runs in a forked child. Then child exit()s. By this time, entire script is read, and buffered in a FILE object from fopen("SCRIPT"). But fgetc() did not consume entire input. exit() lseeks back by -9 bytes, from <eof> to 'e' in 'echo'. (this may be libc-specific). This change of fd position *is shared with the parent*! Now parent can read more, and it thinks there is another "echo END". End result: two "echo END"s are run. Fix this by _exit()ing instead. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-25ash: fix handling of ${VAR: -2}Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-22config: disentangle PREFER_APPLETS from SH_STANDALONE and SH_NOFORKDenys Vlasenko
On user request. I thought enabling/disabling them all together is more consistent. Evidently, some people do want them to be separately selectable. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-21hush: fix a possible bugDenys Vlasenko
Not sure this was actually a triggerable bug, but the code looked flaky. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-16ash: do not leave SIGQUIT ignored on "exec CMD"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22*: slap on a few ALIGN1/2s where appropriateDenys Vlasenko
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map" text data bss dec hex filename 829901 4086 1904 835891 cc133 busybox_before 829665 4086 1904 835655 cc047 busybox Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15ash: bash-compatible $'...' shouldn't expand in double quotesRon Yorston
Bash doesn't expand its $'...' construct in double quotes: $ echo "$'a\tb'" $'a\tb' Change BusyBox ash to do the same. This also fixes a problem with here documents where BusyBox ash gave an incorrect result for: $ cat <<EOF > '$' > EOF '$' Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15Rewrite iteration through applet names to save a few bytesRon Yorston
function old new delta run_applet_and_exit 758 755 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes In standalone shell mode the saving increases to 17 bytes. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-22ash_test: ignore generated filesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-03-22ash_test: printenv: fix missing includesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-03-22ash: fix corruption of ${#var} if $var contains UTF-8 charactersRon Yorston
As reported in bug 8506: $ X=abcdÉfghÍjklmnÓpqrstÚvwcyz $ echo ${#X} abcd26 The result should be 26. This regression was introduced by: <d68d1fb> 2015-05-18 [Ron Yorston] ash: code shrink around varvalue The length in characters was being used to discard the contents of the variable instead of the length in bytes. URL: https://bugs.busybox.net/8506 Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-02-01Fix compiling with musl's utmp stubsKylie McClain
This patch fixes compiling busybox with FEATURE_UTMP and _WTMP enabled. musl, while not really support utmp/wtmp, provides stub functions, as well as variables such as _PATH_UTMP, so that programs using utmp or wtmp can still compile fine. My reasoning for this patch is that on Exherbo, I'm currently trying to get us to be able to use the same busybox config file for both glibc and musl systems, using utmp/wtmp on systems that support it, and using the stubs on musl without needing two different configs. As of latest musl git, it provides all utmp functions needed; 1.1.12 doesn't, but I sent a patch to Rich to add the utmp{,x}name functions expected to exist, which was merged into musl upstream. Signed-off-by: Kylie McClain <somasissounds@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-02ash: suppress a compilation warningCristian Ionescu-Idbohrn
Reported by gcc (Debian 5.3.1-4) 5.3.1 20151219 shell/ash.c: In function 'evaltree': shell/ash.c:8432:19: warning: logical not is only applied to the left hand side of comparison Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04ash: add support for bash 'function' keywordRon Yorston
Where the POSIX shell allows functions to be defined as: name () compound-command [ redirections ] bash adds the alternative syntax: function name [()] compound-command [ redirections ] Implement this in ash's bash compatibility mode. Most compound commands work (for/while/until/if/case/[[]]/{}); one exception is: function f (echo "no way!") The other two variants work: f() (echo "ok") function f() (echo "also ok") function old new delta parse_command 1555 1744 +189 tokname_array 232 240 +8 .rodata 155612 155566 -46 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 197/-46) Total: 151 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04hush-misc/func_args1.tests: remove "UNFIXED BUG", it does not failDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04ash: copy function tests from hush testsuiteRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-30ash: allow popredir to be called if the stack is emptyRon Yorston
If /tmp/test.sh is a script that tries to run a second script which happens to be non-executable this: command . /tmp/test.sh causes a seg fault. This is because clearredir is called in the error path to clear the stack of redirections. The normal path then calls popredir, but popredir fails when the stack is empty. Reported-by: Bastian Bittorf <bittorf@bluebottle.com> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-30ash: fix EXEXEC status clobberingRon Yorston
evalcommand always clobbers the exit status in case of an EXEXEC which means that exec always fails with exit status 2 regardless of what it actually returns. This patch adds the missing check for EXEXEC so that the correct exit status is preserved. It causes the test ash-misc/exec.tests to succeed. Based on commit 7f68426 in dash git, by Herbert Xu. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-30ash: add tests for failures of the exec and command builtinsRon Yorston
The exec builtin should return an exit status of 127 if the command can't be found. It doesn't: it returns 2. If the command builtin is used to source a script that runs a second script that doesn't exist ash should issue an error. Instead it seg faults. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29hush: copy for.tests from ash testsuiteDenys Vlasenko
This test passes for hush Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: simplify EOF/newline handling in list parserRon Yorston
Processing of here documents in ash has had a couple of breakages which are now the subject of tests. This commit should fix both. It is based on the following commit in dash git by Herbert Xu: <7c245aa> [PARSER] Simplify EOF/newline handling in list parser (See git://git.kernel.org/pub/scm/utils/dash/dash.git) Reported-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29Revert "ash: fix a SEGV case in an invalid heredoc" xxxRon Yorston
This reverts commit 7e66102f762a7d80715f0c7e5925433256b78cee but leaves the test in place as it's still valid. Reported-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: fix error during recursive processing of here documentRon Yorston
Save the value of the checkkwd flag to prevent it being clobbered during recursion. Based on commit ec2c84d from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu. function old new delta readtoken 190 203 +13 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash tests: make test print test name before it is runDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: only allow local variables in functionsRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: respect -p flag when command builtin is run with -v/-VRon Yorston
The command builtin should only check the default path, not $PATH, when the -p flag is used along with -v/-V. Based on commits 65ae84b (by Harald van Dijk) and 29ee27d (by Herbert Xu) from git://git.kernel.org/pub/scm/utils/dash/dash.git). function old new delta commandcmd 72 87 +15 describe_command 437 450 +13 typecmd 84 86 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 30/0) Total: 30 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: fix command -- crashDenys Vlasenko
busybox sh -c 'command --' segfaults because parse_command_args returns a pointer to a null pointer. Based on commit 18071c7 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Gerrit Pape. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: save a few bytes in code to parse case statementsRon Yorston
Based on commit 49b82fc from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu. function old new delta parse_command 1563 1555 -8 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8) Total: -8 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: allow newline after variable name in for loopRon Yorston
Newline is a valid delimiter between the variable name and `in` keyword in for loops. Based on commit 22e8fb4 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu. function old new delta parse_command 1568 1563 -5 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-5) Total: -5 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-29ash: add test for issue with here documentRon Yorston
This used to work but doesn't now: foo () { cat <<EOF && { echo "$1" ; } $1 EOF } foo "bar" Reported-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-23tidy up strtok useDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-13typo fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-11hush: code shrinkDenys Vlasenko
function old new delta builtin_wait 347 328 -19 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-10ash: shrink umask codeDenys Vlasenko
function old new delta umaskcmd 258 248 -10 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-09remove global "jmp_buf die_jmp" from !FEATURE_PREFER_APPLETS buildsDenys Vlasenko
function old new delta xfunc_has_died - 21 +21 sleep_much - 12 +12 sleep10 - 9 +9 die_func - 4 +4 fflush_stdout_and_exit 35 36 +1 builtin_type 121 119 -2 die_sleep 4 - -4 xfunc_die 60 24 -36 hush_main 1128 1011 -117 die_jmp 156 - -156 ------------------------------------------------------------------------------ (add/remove: 4/2 grow/shrink: 1/3 up/down: 47/-315) Total: -268 bytes text data bss dec hex filename 939992 992 17652 958636 ea0ac busybox_old 939880 992 17496 958368 e9fa0 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-09ash: "you have mail" should ignore first change in mtimeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-16 07:23:33 +0000