summaryrefslogtreecommitdiff
path: root/networking
AgeCommit message (Collapse)Author
2005-06-07Thus spake Brenda J. Butler:Rob Landley
We were seeing some timeouts when getting files with the busybox tftp client. With tcpdump, we saw that the tftp client was receiving blocks and ack'ing them, but the server was failing to receive the occasional ack. When that happened, the server would send the last block over again, but the tftp client was expecting the next block. This patch allows the client to recover from this situation (it sends an ack for the repeat block but does not write it to the local file). I hope it meets your approval, please don't hesitate to send me comments for improvement. The patch is against "head" in svn, I tested it on an older version of busybox in our environment. It applied cleanly to the older version. Credit for this goes to my co-worker John McCarthy for finding it and me for fixing it (assuming it works for everyone else too). cheerio, bjb
2005-05-26Tobias Krawutschke found a bug where the DHCP client would accept packetsRob Landley
with the wrong ARP address, meaning we could easily get somebody else's IP. That is a bad thing, and this is the minimal two-line fix.
2005-05-11import ether-wake applet by haveaniceday Bug 252Mike Frysinger
2005-05-10Patch from Jason Schoon to add IPV6 support to telnetd. Reworked by RobRob Landley
Landley to remove an #ifdef and move another one out of the flow of code.
2005-05-07use shared busybox error messages to save a few bytesMike Frysinger
2005-05-06make the exec (-e) an optional feature of netcatMike Frysinger
2005-05-06In bug 247, haveaniceday writes:Mike Frysinger
The option "-w secs" adds a timeout for writing.
2005-05-04Revert the uptime() removal. Let the list sort it out...Rob Landley
2005-05-04Patch from Shaun Jackman:Rob Landley
Replace uptime with time(NULL). time is more portable than uptime and eliminates the need to define uptime, reducing code size slightly.
2005-05-03From: Shaun Jackman <sjackman@gmail.com>Rob Landley
To: busybox@mail.codepoet.org Wrap sockaddr_in6 in a ifdef CONFIG_FEATURE_IPV6. Include sys/types.h instead of asm/types.h. Include netinet/if_ether.h instead of linux/if_ether.h The ioctl request argument is an int, not an unsigned short.
2005-05-03Revert Tito's patch to zcip. My bad, David Brownell had objected and I missedRob Landley
it...
2005-05-01On Tuesday 19 April 2005 21:10, Tito wrote and today added:Rob Landley
> Hi, > this is a first attempt of size optimization for zcip taking into account all > the hints given so far on the list. > I've applied just the more obvious busyboxifications so maybe it could be > optimized more. BTW: I've ripped out a lot of debug code and changed c++ // comments to /* */ as both were rather confusing for a newbie like me. ;-) Sorry to the author for that. I know that this makes mantaining the code easier, but I'm simple minded....
2005-04-30David Brownell submitted a new applet, zcip, based on RFC 3927. This isRob Landley
version 0418b. It compiled.
2005-04-27Do not attempt to free() the application's environment, which is wasEric Andersen
not dynamically allocated. Instead, use a private variable to store the environment array, which is used when we exec applications.
2005-04-23remove unused variable and declare writepid inlineMike Frysinger
2005-04-18touchups as suggested by Vladimir N. OleynikMike Frysinger
2005-04-17import fakeidentd module started by Thomas LundquistMike Frysinger
2005-04-16Patch from Bernhard Fischer to make a bunch of symbols staticEric Andersen
which were otherwise cluttering the global namespace.
2005-04-16Fix broken macroEric Andersen
2005-04-16Only define a local environ when not using the prototype from unistd.hEric Andersen
2005-04-16In Bug 208, bernhardf writes:Mike Frysinger
On machines with only ANSI compliant compilers, not explitily delcaring an empty parameter list 'void' causes failure.
2005-04-16In Bug 209, bernhardf writes:Mike Frysinger
struct named { named_field: init, }; appear to be depraced by now; rather use C{99} format as in struct named { .named_field = init, };
2004-12-06merge from udhcp moduleMike Frysinger
2004-10-13return failure when nslookup failsEric Andersen
2004-10-08Wade Berrier writes:Eric Andersen
Hello, Here's a patch for a first attempt at static leases for udhcpd. Included in the tarball are 2 files (static_leases.c, static_leases.h) and a patch against the latest cvs. In the config file you can configure static leases with the following format: static_lease 00:60:08:11:CE:4E 192.168.0.54 static_lease 00:60:08:11:CE:3E 192.168.0.44 Comments/suggestions/improvements are welcome. Wade
2004-10-08Patch from Denis Vlasenko to fix a problem whereEric Andersen
wget http://1.2.3.4/abc/ loses last '/'
2004-10-08last_patch139.gz from Vladimir N. Oleynik:Eric Andersen
>I also don't mean to disagree about leaving 30x status codes until after >1.0. In fact, although redirecting http://host/dir to http://host/dir/ >with a 301 is common practice (e.g. Apache, IIS), AFAIK it isn't >actually required (or mentioned) by the HTTP specs. Ok. Attached patch have 302 and 408 implemented features. --w vodz
2004-10-08egor duda writes:Eric Andersen
Hi! I've created a patch to busybox' build system to allow building it in separate tree in a manner similar to kbuild from kernel version 2.6. That is, one runs command like 'make O=/build/some/where/for/specific/target/and/options' and everything is built in this exact directory, provided that it exists. I understand that applyingc such invasive changes during 'release candidates' stage of development is at best unwise. So, i'm currently asking for comments about this patch, starting from whether such thing is needed at all to whether it coded properly. 'make check' should work now, and one make creates Makefile in build directory, so one can run 'make' in build directory after that. One possible caveat is that if we build in some directory other than source one, the source directory should be 'distclean'ed first. egor
2004-09-23Add some notes on how to make telnetd actually workEric Andersen
2004-09-14Patch from Felipe Kellermann, remove some unnecessary dups, i declared a few ↵Glenn L McGrath
extra const's also.
2004-08-28Fixup some warningsEric Andersen
2004-08-26Vladimir N. Oleynik writes:Eric Andersen
Ming-Ching, >>No. Here there are no mistakes. >>You using POST metod. >>For get data you should read from stdin CONTENT_LENGTH bytes. >Hower as I posted a little while ago, there is indeed a bug >in POST method if the CONTENT_LENGTH is bigger >than sizeof(wbuf[128]). So if your CGI script is expecting to >read the full CONTENT_LENGTH, it might block forever, >because it will only transfer sizeof(wbuf) to the CGI. Ok, Ok. I should find time to understand with a problem. Try attached patch. --w vodz
2004-08-11Set default command to list rather than get, its default behaviour nowGlenn L McGrath
coincides with upstream. Patch from debian diff.
2004-07-30use SIGTERM to kill off udhcpd, not SIGKILLEric Andersen
2004-07-30As noted by Eric Spakman, calling static_down() and then callingEric Andersen
bootp_down() seems redundant, esp since bootp_down was a subset of static_down, so just use that...
2004-07-26add missing ;1_00_rc2Eric Andersen
2004-07-26bother. unrevert my fix.Eric Andersen
2004-07-26Make certain that udhcp shuts down the interfaceEric Andersen
2004-07-26oopsEric Andersen
2004-07-26Make certain that udhcp shuts down the interfaceEric Andersen
2004-07-23Patch from Manousaridis Angelos to bring dhclient down more elegentlyGlenn L McGrath
2004-07-21Patch from Mike Snitzer to fix return codes.Glenn L McGrath
"I have a need to _really_ know if the interface was properly configured via ifup so I made busybox's ifupdown pass the return codes through rather than dropping them on the floor." "All the functions in ifupdown.c return 1 on success and 0 on failure (which happens to the opposite of standard practices but whatever). So it is important for all these functions to not blindly return 1." "The problem with blindly returning ret, even if it is != 1, is the callers expect a 0 or 1 and accumulate the return codes. So a function that makes 3 calls to execute will have a value of 3 accumulated. That value of 1 (success) was almost always returned even if 1 of the commands in the command sequence failed. The attached patch fixes the lack of checking to verify thar result == expected_reult."
2004-07-21Patch from Mike Snitzer, bring down dhclient using its correct pid, fixGlenn L McGrath
a grammatical error.
2004-07-20Prevent "`bootp_down' was declared implicitly `extern' and later `static'" ↵Eric Andersen
warning
2004-06-29Paul Fox writes:Eric Andersen
hi -- working with ifupdown, i've found a couple of buglets -- the wrong string is passed to an error message. paul
2004-06-22Robin Farine writes:Eric Andersen
Hi, Package: BusyBox Version: 1.0.0-pre10 When an incomplete read or write from/to a local file occurs (i.e. not an EOF condition), the tftp client prematurely exits. This problem can be reproduced by slowly piping data to the tftp client like this: (for v in 1 2 3; do echo $v; sleep 1; done) | \ tftp -p -l - -r output.txt <host> The output file on the TFTP server will contain "1". The attached patch provides a possible solution to this problem. I can reproduce this on ARM sa1110 and ARM xscale boards, both running Linux-2.6.4 & glibc-2.3.2. Thanks for the wonderful program! Robin
2004-06-22Patch from Bastian Blank:Eric Andersen
On Sat, Jun 19, 2004 at 10:57:37PM +0200, Bastian Blank wrote: > The following patch changes klogd to use openlog/syslog themself > instead of calling syslog_msg which always calls the triple > openlog/syslog/closelog. Updated patch: get rid of syslog_msg entirely. Request from Erik Andersen. Bastian
2004-06-22Robin Farine writes:Eric Andersen
Package: BusyBox Version: 1.0.0-pre10 Passing the -q <integer> option to inetd causes it to dereference an invalid pointer (optarg). The attached patch provides a fix to this problem. Robin
2004-05-19use busybox sysinfo structRuss Dill
2004-05-19Fix a compile problemEric Andersen