summaryrefslogtreecommitdiff
path: root/networking/udhcp/dhcpc.c
AgeCommit message (Collapse)Author
2020-12-15udhcp: bind to device even for ucast packetsMichal Kazior
There are cases where binding to source IP and destination IP is insufficient to guarantee sane xmit netdev. One case where this can fail is when route-matching netdev carrier is down (cable unplugged, wifi disconnected), or the netdev is admin down. Then all the IP based bindings (bind() + connect()) will seemingly succeed but the actual packet can go out through a default gw path. Depending on the network this happens on it can create issues or false alarms. It can also leak some subnet info across networks that shouldn't be routed. As such better be safe than sorry and bind to a netdev to be sure it's used for xmit. function old new delta udhcp_send_kernel_packet 293 336 +43 send_packet 182 188 +6 bcast_or_ucast 37 43 +6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0) Total: 55 bytes Signed-off-by: Michal Kazior <michal@plume.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-10-01gcc-9.x warning fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-08-13udhcpc: add support for long optionsMartin Lewis
Duplicate options are currently overridden (only the last option is kept). This leads to unexpected behavior when using long options. The patch adds support for long options in compliance with RFC 3396. Fixes #13136. function old new delta udhcp_run_script 601 725 +124 optitem_unset_env_and_free - 38 +38 putenvp 46 59 +13 static.xmalloc_optname_optval 718 717 -1 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/1 up/down: 175/-1) Total: 174 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-29udhcpc: fix a TODO in fill_envp using option scannerMartin Lewis
fill_envp now iterates over the packet only once instead of a few hundred times using the new option scanner. function old new delta udhcp_scan_options - 189 +189 putenvp - 46 +46 init_scan_state - 22 +22 udhcp_get_option 227 104 -123 udhcp_run_script 835 601 -234 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 0/2 up/down: 257/-357) Total: -100 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09dhcpc: refactor xmalloc_optname_optval to shrink binary sizeMartin Lewis
function old new delta len_of_option_as_string 14 13 -1 dhcp_option_lengths 14 13 -1 udhcp_str2optset 641 637 -4 static.xmalloc_optname_optval 777 718 -59 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65) Total: -65 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09dhcpc: code shrink in good_hostnameMartin Lewis
Incorporated valid_domain_label into good_hostname to simplify the implementation. function old new delta static.xmalloc_optname_optval 973 958 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15) Total: -15 bytes text data bss dec hex filename 993144 16915 1872 1011931 f70db busybox_old 993129 16915 1872 1011916 f70cc busybox_unstripped Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-24udhcpc6: add ELAPSED_TIME option to outgoing packetsDenys Vlasenko
function old new delta init_d6_packet 53 121 +68 udhcpc_main 2577 2582 +5 udhcpc6_main 2593 2597 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02libbb: reduce the overhead of single parameter bb_error_msg() callsJames Byrne
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-13udhcpc: fix comment, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-11dhcpc.c: Added support for relay server parameter.Martin Lewis
Resolved a TODO by adding support for gateway_nip parameter. function old new delta udhcp_run_script 792 835 +43 Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31dhcp: downgrade "got raw socket fd" message to log3, make log2 default maxDenys Vlasenko
log3 messages are very much redundant function old new delta change_listen_mode 322 302 -20 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31dhcp: get rid of static data signal_pipeDenys Vlasenko
function old new delta udhcp_sp_setup 65 110 +45 udhcp_sp_fd_set 60 59 -1 udhcpd_main 1442 1437 -5 udhcpc_main 2684 2679 -5 signal_pipe 8 - -8 packed_usage 33292 33284 -8 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/4 up/down: 45/-27) Total: 18 bytes text data bss dec hex filename 952746 481 7296 960523 ea80b busybox_old 952768 481 7288 960537 ea819 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26udhcp: rename client_config to client_data, server_config to server_dataDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26dhcp: get rid of last global dataDenys Vlasenko
function old new delta udhcpc_main 2680 2684 +4 state 1 - -1 listen_mode 1 - -1 sockfd 4 - -4 ------------------------------------------------------------------------------ (add/remove: 0/3 grow/shrink: 1/0 up/down: 4/-6) Total: -2 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30Optionally re-introduce bb_info_msg()James Byrne
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-27udhcpc: don't exit after backgrounding on -n -bAndrey Mazo
Currently, running "udhcpc -n -b" causes udhcpc to go to background and then exit after some time unless a lease is obtained. It's not very useful to do so as the calling process doesn't know if the lease was obtained or not anyway. The code actually tries to favor "-b" over "-n", but doesn't clear "-n" flag while clearing "-b" after backgrounding. So, clear "-n" flag after going into background. This effectively makes "-b" override "-n" completely and "-n -b" behave the same as "-b". This allows to override default "-n" option, passed to udhcpc by ifupdown, without recompiling busybox. URL: https://bugs.busybox.net/11691 Signed-off-by: Andrey Mazo <ahippo@yandex.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-27udhcpc: tweak --helpDenys Vlasenko
function old new delta packed_usage 33324 33315 -9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-07udhcpc: when decoding DHCP_SUBNET, ensure it is 4 bytes longDenys Vlasenko
function old new delta udhcp_run_script 795 801 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-17udhcpc: check that 4-byte options are indeed 4-byte, closes 11506Denys Vlasenko
function old new delta udhcp_get_option32 - 27 +27 udhcp_get_option 231 248 +17 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/0 up/down: 44/0) Total: 44 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-03udhcpc: code shrinkDenys Vlasenko
function old new delta perform_release 112 172 +60 send_release 81 - -81 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/0 up/down: 60/-81) Total: -21 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-10-30udhcpc: ensure at least one unicast renew attemptDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-09-28udhcpc: give SIGUSR1-induced renew one chance of unicast renewDenys Vlasenko
The caps were inconsistent: timeout to renew was capped at 20 seconds, and any renews with timeout <= 60 seconds were forced to broadcast. function old new delta udhcpc_main 2683 2680 -3 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-01udhcpc: add a cooment about sanitizing DHCP_DOMAIN_NAME, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-08-01udhcpc: do in fact not allow hostname components which start with dashDenys Vlasenko
function old new delta xmalloc_optname_optval 879 893 +14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-21udhcpc: remove code which requires server ID to be on local networkDenys Vlasenko
This reverts "udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may be bogus". Users complain that they do have servers behind routers (with DHCP relays). function old new delta send_packet 168 166 -2 bcast_or_ucast 25 23 -2 udhcp_send_kernel_packet 301 295 -6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: set -x options in requestDenys Vlasenko
Last foru commits: function old new delta option_to_env 621 791 +170 .rodata 168351 168505 +154 attach_option 431 506 +75 add_d6_client_options 112 167 +55 d6_option_strings 30 84 +54 udhcp_str2optset 644 660 +16 d6_optflags 12 20 +8 udhcpc6_main 2590 2596 +6 udhcpc_main 2648 2651 +3 read_optset 15 18 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0) Total: 544 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-13udhcp: support string user options, closes 10946Denys Vlasenko
function old new delta udhcp_str2optset 536 628 +92 packed_usage 32757 32760 +3 udhcpc_main 2708 2692 -16 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 95/-16) Total: 79 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10udhcpd: fix "not dying on SIGTERM"Denys Vlasenko
Fixes: commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8 "udhcp: use poll() instead of select()" Feb 16 2017 udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read. In the above commit, it was changed as follows: - if (!FD_ISSET(signal_pipe.rd, rfds)) + if (!pfds[0].revents) return 0; The problem is, the check was working for select() purely by accident. Caught signal interrupts select()/poll() syscalls, they return with EINTR (regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked. IOW: they can't see any changes to fd state caused by signal haldler (in our case, signal handler makes signal pipe ready to be read). For select(), it means that rfds[] bit array is unmodified, bit of signal pipe's read fd is still set, and the above check "works": it thinks select() says there is data to read. This accident does not work for poll(): .revents stays clear, and we do not try reading signal pipe as we should. In udhcpd, we fall through and block in socket read. Further SIGTERM signals simply cause socket read to be interrupted and then restarted (since SIGTERM handler has SA_RESTART=1). Fixing this as follows: remove the check altogether. Set signal pipe read fd to nonblocking mode. Always read it in udhcp_sp_read(). If read fails, assume it's EAGAIN and return 0 ("no signal seen"). udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR (using safe_poll()) - thus ensuring we have correct .revents for all fds - and calling udhcp_sp_read() only if pfds[0].revents!=0. udhcpc performs much fewer reads (typically it sleeps >99.999% of the time), there is no need to optimize it: can call udhcp_sp_read() after each poll unconditionally. To robustify socket reads, unconditionally set pfds[1].revents=0 in udhcp_sp_fd_set() (which is before poll), and check it before reading network socket in udhcpd. TODO: This might still fail: if pfds[1].revents=POLLIN, socket read may still block. There are rare cases when select/poll indicates that data can be read, but then actual read still blocks (one such case is UDP packets with wrong checksum). General advise is, if you use a poll/select loop, keep all your fds nonblocking. Maybe we should also do that to our network sockets? function old new delta udhcp_sp_setup 55 65 +10 udhcp_sp_fd_set 54 60 +6 udhcp_sp_read 46 36 -10 udhcpd_main 1451 1437 -14 udhcpc_main 2723 2708 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-02-07udhcp: do not setlinebuf(stdout), we don't print to stdout anymoreDenys Vlasenko
Since bb_info_msg() was eliminated type of buffering on stdout is not important function old new delta udhcpd_main 1463 1451 -12 udhcpc_main 2735 2723 -12 setlinebuf 19 - -19 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-17udhcpc[6]: remove overzealous timeout clamping codeDenys Vlasenko
function old new delta udhcpc_main 2840 2826 -14 udhcpc6_main 2699 2670 -29 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-05whitespace and comment format fixes, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29use %m printf specifier where appropriateDenys Vlasenko
function old new delta out 85 75 -10 udhcpd_main 1472 1461 -11 open_stdio_to_tty 98 85 -13 init_exec 245 232 -13 udhcpc_main 2763 2749 -14 do_cmd 4771 4755 -16 status_line_bold_errno 32 14 -18 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-95) Total: -95 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc[6]: make log2 messages for chaddr field indented like the restDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may ↵Denys Vlasenko
be bogus With new code, we request that target IP (server ID) must be directly reachable. If it's not, this happens: udhcpc: waiting 2000 seconds udhcpc: entering listen mode: kernel udhcpc: opening listen socket on *:68 wlan0 udhcpc: entering renew state udhcpc: sending renew to 1.1.1.1 udhcpc: send: Network is unreachable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy! udhcpc: entering rebinding state udhcpc: entering listen mode: raw udhcpc: created raw socket udhcpc: sending renew to 0.0.0.0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed over eth0 (!) and maybe even into Internet (!!!). function old new delta udhcpc_main 2752 2763 +11 udhcp_send_kernel_packet 295 301 +6 send_renew 82 84 +2 send_packet 166 168 +2 bcast_or_ucast 23 25 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc[6]: initialize entire sockaddr_llDenys Vlasenko
I see random field values like sll_hatype=0x267 when I strace. They seem to not matter, but just in case they sometimes do, let's at least have deterministic values (via memset(0)). function old new delta change_listen_mode 308 322 +14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-29udhcpc: show only short opts in --help textDenys Vlasenko
function old new delta packed_usage 31615 31501 -114 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove opt_complementaryDenys Vlasenko
function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove applet_long_optionsDenys Vlasenko
FEATURE_GETOPT_LONG made dependent on LONG_OPTS. The folloving options are removed, now LONG_OPTS enables long options for affected applets: FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS They either had a small number of long options, or their long options are essential. Example: upstream addgroup and adduser have ONLY longopts, we should probably go further and get rid of non-standard short options. To this end, make addgroup and adduser "select LONG_OPTS". We had this breakage caused by us even in our own package! #if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP /* We try to use --gid, not -g, because "standard" addgroup * has no short option -g, it has only long --gid. */ argv[1] = (char*)"--gid"; #else /* Breaks if system in fact does NOT use busybox addgroup */ argv[1] = (char*)"-g"; #endif xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS. hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime Shorten help texts by omitting long option when short opt alternative exists. Reduction of size comes from the fact that store of an immediate (an address of longopts) to a fixed address (global variable) is a longer insn than pushing that immediate or passing it in a register. This effect is CPU-agnostic. function old new delta getopt32 1350 22 -1328 vgetopt32 - 1318 +1318 getopt32long - 24 +24 tftpd_main 562 567 +5 scan_recursive 376 380 +4 collect_cpu 545 546 +1 date_main 1096 1095 -1 hostname_main 262 259 -3 uname_main 259 255 -4 setpriv_main 362 358 -4 rmdir_main 191 187 -4 mv_main 562 558 -4 ipcalc_main 548 544 -4 ifenslave_main 641 637 -4 gzip_main 192 188 -4 gunzip_main 77 73 -4 fsfreeze_main 81 77 -4 flock_main 318 314 -4 deluser_main 337 333 -4 cp_main 374 370 -4 chown_main 175 171 -4 applet_long_options 4 - -4 xargs_main 894 889 -5 wget_main 2540 2535 -5 udhcpc_main 2767 2762 -5 touch_main 436 431 -5 tar_main 1014 1009 -5 start_stop_daemon_main 1033 1028 -5 sed_main 682 677 -5 script_main 1082 1077 -5 run_parts_main 330 325 -5 rtcwake_main 459 454 -5 od_main 2169 2164 -5 nl_main 201 196 -5 modprobe_main 773 768 -5 mkdir_main 160 155 -5 ls_main 568 563 -5 install_main 773 768 -5 hwclock_main 411 406 -5 getopt_main 622 617 -5 fstrim_main 256 251 -5 env_main 198 193 -5 dumpleases_main 635 630 -5 dpkg_main 3991 3986 -5 diff_main 1355 1350 -5 cryptpw_main 233 228 -5 cpio_main 593 588 -5 conspy_main 1135 1130 -5 chpasswd_main 313 308 -5 adduser_main 887 882 -5 addgroup_main 416 411 -5 ftpgetput_main 351 345 -6 get_terminal_width_height 242 234 -8 expand_main 690 680 -10 static.expand_longopts 18 - -18 static.unexpand_longopts 27 - -27 mkdir_longopts 28 - -28 env_longopts 30 - -30 static.ifenslave_longopts 34 - -34 mv_longopts 46 - -46 static.rmdir_longopts 48 - -48 packed_usage 31739 31687 -52 ------------------------------------------------------------------------------ (add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes text data bss dec hex filename 915681 485 6880 923046 e15a6 busybox_old 915428 485 6876 922789 e14a5 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-24udhcpc[6]: fix messages referring to select() while we use poll()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-21udhcpc[6]: on log level 1, three messages about raw socket is overkillDenys Vlasenko
Move first two messages to log2 level: 08:46:32.23824 udhcpc: opening raw socket on ifindex 2 08:46:32.23825 udhcpc: got raw socket fd 08:46:32.26354 udhcpc: created raw socket Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-06-28udhcpc6: make -O OPT workDenys Vlasenko
Patch is based on work by tiggerswelt.net. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08udhcpc: do not accept --background on NOMMU (same as -b)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08udhcpc: fix "udhcpc -x hostname:<name> not working on nommu"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-04-17Spelling fixes in comments, documentation, tests and examplesDenys Vlasenko
By klemens <ka7@github.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17udhcpc: make sure we do not overflow poll timeoutDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16udhcp: use poll() instead of select()Denys Vlasenko
function old new delta udhcp_sp_read 65 46 -19 udhcp_sp_fd_set 79 54 -25 udhcpd_main 1530 1482 -48 udhcpc_main 2780 2730 -50 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142) Total: -142 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-11-23Convert all udhcp applets to "new style" applet definitionsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25udhcpc: check read of option length byte to be within packetBrian Foley
function old new delta udhcp_get_option 215 220 +5 udhcp_run_script 802 803 +1 Signed-off-by: Brian Foley <bpfoley@google.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-26udhcpc: Unconditionally call deconfig script, not only if lease is activePeter Korsgaard
The udhcpc script may be used to setup fallback configuration (E.G. IPv4LL, fixed IP address, ..) that also needs to be cleaned up on release (E.G. when SIGUSR2 is called or on shutdown with -R), so unconditionally call deconfig. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-06getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LISTDenys Vlasenko
In many cases, this aqllows to drop use of opt_complementary. Approximately -400 bytes: function old new delta getopt32 1423 1502 +79 opt_string 17 18 +1 OPT_STR 24 25 +1 uniq_main 416 406 -10 timeout_main 279 269 -10 sulogin_main 270 260 -10 readprofile_main 1825 1815 -10 ps_main 543 533 -10 pidof_main 245 235 -10 pgrep_main 611 601 -10 od_main 2600 2590 -10 mkfs_minix_main 2684 2674 -10 mkfs_ext2_main 2603 2593 -10 microcom_main 712 702 -10 makemime_main 315 305 -10 ionice_main 282 272 -10 inetd_main 2074 2064 -10 ifplugd_main 1144 1134 -10 halt_main 353 343 -10 getopt_main 636 626 -10 fdisk_main 2854 2844 -10 env_main 206 196 -10 dmesg_main 319 309 -10 conspy_main 1214 1204 -10 awk_main 981 971 -10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220) Total: -139 bytes text data bss dec hex filename 919373 906 14060 934339 e41c3 busybox_old 918969 906 14060 933935 e402f busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-18 07:23:29 +0000