summaryrefslogtreecommitdiff
path: root/networking/udhcp/common.h
AgeCommit message (Collapse)Author
2021-08-20udhcp: fix build breakage on MIPSDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-03udhcp: convert log1s() macro to functionDenys Vlasenko
function old new delta log1s - 15 +15 udhcp_recv_kernel_packet 134 125 -9 d6_recv_kernel_packet 118 109 -9 change_listen_mode 280 271 -9 send_packet 162 141 -21 udhcpc_main 2625 2598 -27 udhcpc6_main 2655 2628 -27 d6_recv_raw_packet 255 216 -39 udhcp_recv_raw_packet 562 484 -78 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/8 up/down: 15/-219) Total: -204 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-02udhcpc: get rid of client_data.fqdn fieldDenys Vlasenko
function old new delta attach_option 253 276 +23 udhcpc_main 2582 2588 +6 udhcpc6_main 2579 2571 -8 add_client_options 175 158 -17 udhcp_insert_new_option 169 138 -31 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 29/-56) Total: -27 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-06-02udhcpc: include client-id option in DECLINEs, even if it's a custom -x ↵Denys Vlasenko
61:HEX option client_data.vendorclass, .hostname and .fqdn probably need the same treatment: just insert them into the list of -x opts, get rid of if (client_data.vendorclass) udhcp_add_binary_option(packet, client_data.vendorclass); if (client_data.hostname) udhcp_add_binary_option(packet, client_data.hostname); if (client_data.fqdn) udhcp_add_binary_option(packet, client_data.fqdn); function old new delta udhcp_insert_new_option - 166 +166 perform_release 171 207 +36 perform_d6_release 227 259 +32 udhcpc6_main 2558 2580 +22 init_d6_packet 103 84 -19 udhcpc_main 2585 2564 -21 attach_option 397 253 -144 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/3 up/down: 256/-184) Total: 72 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-15udhcp: bind to device even for ucast packetsMichal Kazior
There are cases where binding to source IP and destination IP is insufficient to guarantee sane xmit netdev. One case where this can fail is when route-matching netdev carrier is down (cable unplugged, wifi disconnected), or the netdev is admin down. Then all the IP based bindings (bind() + connect()) will seemingly succeed but the actual packet can go out through a default gw path. Depending on the network this happens on it can create issues or false alarms. It can also leak some subnet info across networks that shouldn't be routed. As such better be safe than sorry and bind to a netdev to be sure it's used for xmit. function old new delta udhcp_send_kernel_packet 293 336 +43 send_packet 182 188 +6 bcast_or_ucast 37 43 +6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0) Total: 55 bytes Signed-off-by: Michal Kazior <michal@plume.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-10-01udhcp: remove struct packing attribute, eliminates gcc-9.xDenys Vlasenko
"error: taking address of packed member of 'struct ip_udp_dhcp_packet' may result in an unaligned pointer value" here: udhcp_dump_packet(&packet.data); and in other places. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-29udhcp: add option scannerMartin Lewis
Added an option scanner to udhcp to enable iteration over packet options. Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09dhcpc: refactor xmalloc_optname_optval to shrink binary sizeMartin Lewis
function old new delta len_of_option_as_string 14 13 -1 dhcp_option_lengths 14 13 -1 udhcp_str2optset 641 637 -4 static.xmalloc_optname_optval 777 718 -59 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65) Total: -65 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09udhcp: comment out unused domain compression codeDenys Vlasenko
function old new delta attach_option 411 406 -5 dname_enc 381 167 -214 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-219) Total: -219 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02libbb: reduce the overhead of single parameter bb_error_msg() callsJames Byrne
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-23dhcp: tweak comments, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30Optionally re-introduce bb_info_msg()James Byrne
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-13udhcp: add 100 and 101 dhcp options for ipv4Antoine Girard-Vallée
Support for the IEEE timezone string and timezone database strings (100 and 101 options respectively) is added for ipv4, conforming to RFC-4833. The two options are passed to hook scripts in the variables tzstr and tzdbstr. function old new delta dhcp_option_strings 280 294 +14 dhcp_optflags 76 80 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-15Update examples/udhcp/udhcpd.confDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-01-07udhcpc: when decoding DHCP_SUBNET, ensure it is 4 bytes longDenys Vlasenko
function old new delta udhcp_run_script 795 801 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-17udhcpc: check that 4-byte options are indeed 4-byte, closes 11506Denys Vlasenko
function old new delta udhcp_get_option32 - 27 +27 udhcp_get_option 231 248 +17 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/0 up/down: 44/0) Total: 44 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-04udhcp: add decimal option values in comments, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-07-04udhcp: add option 211, "reboot time"Jeremy Kerr
As defined in RFC 5071. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-21udhcpc: remove code which requires server ID to be on local networkDenys Vlasenko
This reverts "udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may be bogus". Users complain that they do have servers behind routers (with DHCP relays). function old new delta send_packet 168 166 -2 bcast_or_ucast 25 23 -2 udhcp_send_kernel_packet 301 295 -6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: set -x options in requestDenys Vlasenko
Last foru commits: function old new delta option_to_env 621 791 +170 .rodata 168351 168505 +154 attach_option 431 506 +75 add_d6_client_options 112 167 +55 d6_option_strings 30 84 +54 udhcp_str2optset 644 660 +16 d6_optflags 12 20 +8 udhcpc6_main 2590 2596 +6 udhcpc_main 2648 2651 +3 read_optset 15 18 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0) Total: 544 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10udhcpd: fix "not dying on SIGTERM"Denys Vlasenko
Fixes: commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8 "udhcp: use poll() instead of select()" Feb 16 2017 udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read. In the above commit, it was changed as follows: - if (!FD_ISSET(signal_pipe.rd, rfds)) + if (!pfds[0].revents) return 0; The problem is, the check was working for select() purely by accident. Caught signal interrupts select()/poll() syscalls, they return with EINTR (regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked. IOW: they can't see any changes to fd state caused by signal haldler (in our case, signal handler makes signal pipe ready to be read). For select(), it means that rfds[] bit array is unmodified, bit of signal pipe's read fd is still set, and the above check "works": it thinks select() says there is data to read. This accident does not work for poll(): .revents stays clear, and we do not try reading signal pipe as we should. In udhcpd, we fall through and block in socket read. Further SIGTERM signals simply cause socket read to be interrupted and then restarted (since SIGTERM handler has SA_RESTART=1). Fixing this as follows: remove the check altogether. Set signal pipe read fd to nonblocking mode. Always read it in udhcp_sp_read(). If read fails, assume it's EAGAIN and return 0 ("no signal seen"). udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR (using safe_poll()) - thus ensuring we have correct .revents for all fds - and calling udhcp_sp_read() only if pfds[0].revents!=0. udhcpc performs much fewer reads (typically it sleeps >99.999% of the time), there is no need to optimize it: can call udhcp_sp_read() after each poll unconditionally. To robustify socket reads, unconditionally set pfds[1].revents=0 in udhcp_sp_fd_set() (which is before poll), and check it before reading network socket in udhcpd. TODO: This might still fail: if pfds[1].revents=POLLIN, socket read may still block. There are rare cases when select/poll indicates that data can be read, but then actual read still blocks (one such case is UDP packets with wrong checksum). General advise is, if you use a poll/select loop, keep all your fds nonblocking. Maybe we should also do that to our network sockets? function old new delta udhcp_sp_setup 55 65 +10 udhcp_sp_fd_set 54 60 +6 udhcp_sp_read 46 36 -10 udhcpd_main 1451 1437 -14 udhcpc_main 2723 2708 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may ↵Denys Vlasenko
be bogus With new code, we request that target IP (server ID) must be directly reachable. If it's not, this happens: udhcpc: waiting 2000 seconds udhcpc: entering listen mode: kernel udhcpc: opening listen socket on *:68 wlan0 udhcpc: entering renew state udhcpc: sending renew to 1.1.1.1 udhcpc: send: Network is unreachable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy! udhcpc: entering rebinding state udhcpc: entering listen mode: raw udhcpc: created raw socket udhcpc: sending renew to 0.0.0.0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed over eth0 (!) and maybe even into Internet (!!!). function old new delta udhcpc_main 2752 2763 +11 udhcp_send_kernel_packet 295 301 +6 send_renew 82 84 +2 send_packet 166 168 +2 bcast_or_ucast 23 25 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-03randomconfig fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-06-28udhcpc6: make -O OPT workDenys Vlasenko
Patch is based on work by tiggerswelt.net. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16udhcp: use poll() instead of select()Denys Vlasenko
function old new delta udhcp_sp_read 65 46 -19 udhcp_sp_fd_set 79 54 -25 udhcpd_main 1530 1482 -48 udhcpc_main 2780 2730 -50 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142) Total: -142 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for itDenys Vlasenko
The config item is FEATURE_USE_BSS_TAIL. When it is off (default): function old new delta read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 push 46 44 -2 inetd_main 2136 2134 -2 uevent_main 421 418 -3 addLines 97 92 -5 bb_common_bufsiz1 8193 1024 -7169 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829901 4086 1904 835891 cc133 busybox_unstripped FEATURE_USE_BSS_TAIL=y: read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 inetd_main 2136 2134 -2 bb_common_bufsiz1 8193 - -8193 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829911 4086 880 834877 cbd3d busybox_unstripped FIXME: setup_common_bufsiz() calls are missing. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-30udhcp: get rid of bb_info_msg()Denys Vlasenko
function old new delta udhcpd_main 1501 1531 +30 d6_recv_raw_packet 251 264 +13 perform_d6_release 188 198 +10 udhcpc6_main 2443 2449 +6 udhcp_recv_raw_packet 582 588 +6 udhcp_recv_kernel_packet 132 138 +6 send_d6_renew 140 146 +6 d6_recv_kernel_packet 118 124 +6 send_renew 77 82 +5 send_discover 85 90 +5 send_decline 84 89 +5 send_d6_select 97 102 +5 send_d6_discover 174 179 +5 perform_release 167 172 +5 count_lines 72 74 +2 udhcpc_main 2836 2837 +1 bb_info_msg 125 - -125 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 17/4 up/down: 117/-180) Total: -63 bytes text data bss dec hex filename 924935 906 17160 943001 e6399 busybox_old 924736 906 17160 942802 e62d2 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30udhcpd: add option for tweaking arppingMichel Stam
Some clients have a very short timeout for sending the DHCP DISCOVER, shorter than the arpping timeout of 2000 milliseconds that udhcpd uses by default. This patch allows tweaking the timeout, or disabling of arpping altogether, at the risk of handing out addresses which are already in use. function old new delta udhcpd_main 1460 1501 +41 udhcpc_main 2814 2851 +37 packed_usage 29957 29974 +17 arpping 477 493 +16 find_free_or_expired_nip 161 174 +13 send_offer 285 292 +7 nobody_responds_to_arp 85 89 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-16udhcp: add PXELINUX path prefix option (code 210) definitionJeremy Kerr
Like d3092c99, this change adds support for the DHCP "path-prefix" option, as defined in RFC 5071. We use the string identifer "pxepathprefix". Adding this option makes string parsing in the hook scripts simpler. function old new delta dhcp_option_strings 255 269 +14 dhcp_optflags 72 74 +2 Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-11-12udhcp: add PXELINUX config file option (code 209) definitionJeremy Kerr
This change adds a definition for DHCP option 209. RFC 5071 defines code 209 as a configuration file for a PXE bootloader; this change uses the string "pxeconffile" as its text identifier. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-07-26Add yet another missing ALIGN2 on a global declaration.Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-07-24*: declare strings with ALIGN1, as appropriateMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-12-08udhcpc: sanitize hostnames in incoming packets. Closes 3979.Denys Vlasenko
The following options are replaced with string "bad" if they contain malformed hostname: HOST_NAME, DOMAIN_NAME, NIS_DOMAIN, TFTP_SERVER_NAME function old new delta xmalloc_optname_optval 850 888 +38 attach_option 440 443 +3 len_of_option_as_string 13 14 +1 dhcp_option_lengths 13 14 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/0 up/down: 43/0) Total: 43 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-11-16udhcpc6: rudimentary code to export data to script; fix IAADDR parsingDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-20typo fix in commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-19udhcpc: add support for DHCP option 212 (RFC 5969)Denys Vlasenko
The patch is from OpenWRT people. function old new delta xmalloc_optname_optval 637 874 +237 dhcp_option_strings 237 243 +6 dhcp_optflags 68 70 +2 len_of_option_as_string 12 13 +1 dhcp_option_lengths 12 13 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 247/0) Total: 247 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-10-18udhcp: IF_UDHCP_VERBOSE() macro - improve code readabilityLeonid Lisovskiy
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-09-09udhcp: remove the declaration of non-existent udhcp_checksumBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2011-04-26udhcp: add FEATURE_UDHCP_8021Q optionNigel Hathaway
function old new delta dhcp_option_strings 217 237 +20 dhcp_optflags 64 68 +4 Signed-off-by: Nigel Hathaway <Nigel.Hathaway@ubiquisys.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-10-20dhcp: typo fix: UPD_DHCP_SIZE -> UDP_DHCP_SIZEDenys Vlasenko
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
2010-09-26udhcp: add support for 0x21 ROUTES and 0xf9 MS_STATIC_ROUTES optionsVladislav Grishenko
Signed-off-by: Vladislav Grishenko <themiron@mail.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-08-16*: make GNU licensing statement forms more regularDenys Vlasenko
This change retains "or later" state! No licensing _changes_ here, only form is adjusted (article, space between "GPL" and "v2" and so on). Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-05-30dhcp: indicate IP network order in prototypes tooDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-05-30dhcp: readability cleanups and small code shrinkDenys Vlasenko
function old new delta udhcp_run_script 654 617 -37 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-04udhcp: implement "raw" binary options. Closes bug 735Denys Vlasenko
function old new delta allocate_tempopt_if_needed - 76 +76 udhcp_str2optset 351 415 +64 attach_option 380 398 +18 len_of_option_as_string 11 12 +1 dhcp_option_lengths 11 12 +1 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 4/0 up/down: 160/0) Total: 160 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-04udhcp: s/dhcp_option/dhcp_optflag/gDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-04-03udhcpd: support decoding of option 120 "SIP servers". Closes bug 737Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-03-27udhcp: abort if we see unknown option, and show valid options if soDenys Vlasenko
function old new delta udhcp_option_idx - 77 +77 udhcp_str2optset 366 351 -15 udhcpc_main 2845 2801 -44 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/2 up/down: 77/-59) Total: 18 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-03-26udhcp: cosmetic cleanups; one case of s/full_read/xread/Denys Vlasenko
function old new delta dumpleases_main 632 623 -9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-03-26udhcp: pass pointer to whole packet to "add option" functionsDenys Vlasenko
This is needed for "overflow option" support function old new delta udhcp_find_option - 34 +34 udhcp_add_binary_option 94 106 +12 write_leases 227 223 -4 udhcp_init_header 86 82 -4 send_release 104 99 -5 init_packet 87 81 -6 add_client_options 160 154 -6 add_server_options 100 92 -8 udhcpd_main 1964 1954 -10 udhcpc_main 2859 2837 -22 find_option 34 - -34 ------------------------------------------------------------------------------ (add/remove: 1/1 grow/shrink: 1/8 up/down: 46/-99) Total: -53 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-06 22:33:02 +0000