summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-09-08ash: use pgetc_eatbnl() in more places, take 3Denys Vlasenko
Adding previously skipped "readtoken1(pgetc_eatbnl(), syntax_type..." change from upstream commit: Date: Thu Mar 8 08:37:11 2018 +0100 parser: use pgetc_eatbnl() in more places dash has a pgetc_eatbnl function in parser.c which skips any backslash-newline combinations. It's not used everywhere it could be. There is also some duplicated backslash-newline handling elsewhere in parser.c. Replace most of the calls to pgetc() with calls to pgetc_eatbnl() and remove the duplicated backslash-newline handling. Testcase: PS1='\ :::' should result in ::: prompt, not <newline>::: prompt Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-08ash: parser: Save and restore heredoclist in expandstrDenys Vlasenko
Upstream commit: Date: Sun, 17 May 2020 23:36:25 +1000 parser: Save and restore heredoclist in expandstr On Sun, May 17, 2020 at 01:19:28PM +0100, Harald van Dijk wrote: > This still does not restore the state completely. It does not clean up any > pending heredocs. I see: > > $ PS1='$(<<EOF "' > src/dash: 1: Syntax error: Unterminated quoted string > $(<<EOF ": > > > > That is, after entering the ':' command, the shell is still trying to read > the heredoc from the prompt. This patch saves and restores the heredoclist in expandstr. It also removes a bunch of unnecessary volatiles as those variables are only referenced in case of a longjmp other than one started by a signal like SIGINT. function old new delta expandstr 268 255 -13 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-08ash: parser: Fix handling of empty aliasesDenys Vlasenko
Upstream commit: Date: Tue, 28 Apr 2020 01:15:26 +1000 parser: Fix handling of empty aliases Dash was incorrectly handling empty aliases. When attempting to use an empty alias with nothing else, I'm (incorrectly) prompted for more input: ``` $ alias empty='' $ empty > ``` Other shells (e.g., bash, yash) correctly handle the lone, empty alias as an empty command: ``` $ alias empty='' $ empty $ ``` The problem here is that we incorrectly enter the loop eating TNLs in readtoken(). This patch fixes it by setting checkkwd correctly. function old new delta list 351 355 +4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07shuf: add a TODO, code shrinkDenys Vlasenko
function old new delta shuf_main 501 500 -1 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07hush: fix var_LINENO3.tests failureDenys Vlasenko
function old new delta parse_and_run_string 40 62 +22 i_getch 105 102 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 22/-3) Total: 19 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07shell/ash_test/run-all: unset locale/language variablesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: LINENO starts from 0 in -c SCRIPT modeDenys Vlasenko
The var_LINENO3.tests fails for hush: it does start from 0, but does not increment. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: fix LINENO in functionsDenys Vlasenko
From larger patch by Roberto A. Foglietta <roberto.foglietta@gmail.com> function old new delta evalfun 348 369 +21 ash_main 1202 1218 +16 setinputstring 65 73 +8 lookupvar 116 106 -10 evaltree 772 753 -19 evalsubshell 192 173 -19 evalfor 175 156 -19 evalcase 273 254 -19 evalcommand 1560 1536 -24 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/6 up/down: 45/-110) Total: -65 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: support testsuite for !FEATURE_SUID_CONFIG_QUIET configsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07hush: fix set -n to act immediately, not just after run_list()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: eval: Do not cache value of eflag in evaltreeDenys Vlasenko
Upsteam commit: Date: Mon, 17 May 2021 15:19:23 +0800 eval: Do not cache value of eflag in evaltree Patrick Brünn <P.Bruenn@beckhoff.com> wrote: > Since we are migrating to Debian bullseye, we discovered a new behavior > with our scripts, which look like this: >>cleanup() { >> set +e >> rmdir "" >>} >>set -eu >>trap 'cleanup' EXIT INT TERM >>echo 'Hello world!' > > With old dash v0.5.10.2 this script would return 0 as we expected it. > But since commit 62cf6955f8abe875752d7163f6f3adbc7e49ebae it returns > the last exit code of our cleanup function. ... Thanks for the report. This is actually a fairly old bug with set -e that's just been exposed by the exit status change. What's really happening is that cleanup itself is triggering a set -e exit incorrectly because evaltree cached the value of eflag prior to the function call. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: eval: Check nflag in evaltree instead of cmdloopDenys Vlasenko
Upstream commit: Date: Thu, 4 Jun 2020 21:53:55 +1000 eval: Check nflag in evaltree instead of cmdloop This patch moves the nflag check from cmdloop into evaltree. This is so that nflag will be in force even if we enter the shell via a path other than cmdloop, e.g., through sh -c. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-07ash: add bash-like ERR trap and set -ERoberto A. Foglietta
While at it, stop incrementing LINENO inside traps function old new delta evaltree 567 762 +195 evalfun 268 348 +80 trapcmd 286 333 +47 dotrap 129 157 +28 exitshell 120 139 +19 readtoken1 3096 3110 +14 nlprompt 25 39 +14 nlnoprompt 19 33 +14 .rodata 104245 104255 +10 forkchild 610 617 +7 optletters_optnames 64 68 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 11/0 up/down: 432/0) Total: 432 bytes Signed-off-by: Roberto A. Foglietta <roberto.foglietta@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-06chat: hopefully fix infinite spinning on input EOFDenys Vlasenko
function old new delta chat_main 1295 1303 +8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-05awk: fix printf %%Daniel Thau
A refactor of the awk printf code in e2e3802987266c98df0efdf40ad5da4b07df0113 appears to have broken the printf interpretation of two percent signs, which normally outputs only one percent sign. The patch below brings busybox awk printf behavior back into alignment with the pre-e2e380 behavior, the busybox printf util, and other common (awk and non-awk) printf implementations. function old new delta awk_printf 626 672 +46 Signed-off-by: Daniel Thau <danthau at bedrocklinux.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-04shuf: make -i 99999999990-100000000000 work even on 32 bitsDenys Vlasenko
function old new delta shuf_main 443 501 +58 .rodata 104238 104245 +7 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 65/0) Total: 65 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-04udhcp: add comments, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02examples/var_service/fw/run: allow extif's to be more than one ifaceDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02ash: regressions in process substitutionRon Yorston
Stacy Harper reports that this script: test() { . /tmp/bb_test; } echo "export TEST=foo" >/tmp/bb_test test 2>/dev/null echo "$TEST" correctly prints 'foo' in BusyBox 1.33 but hangs in 1.34. Bisection suggested the problem was caused by commit a1b0d3856 (ash: add process substitution in bash-compatibility mode). Removing the call to unwindredir() in cmdloop() introduced in that commit makes the script work again. Additionally, these examples of process substitution: while true; do cat <(echo hi); done f() { while true; do cat <(echo hi); done } f result in running out of file descriptors. This is a regression from v5 of the process substitution patch caused by changes to evalcommand() not being transferred to v6. function old new delta static.pushredir - 99 +99 evalcommand 1729 1750 +21 exitreset 69 86 +17 cmdloop 372 365 -7 unwindredir 28 - -28 pushredir 112 - -112 ------------------------------------------------------------------------------ (add/remove: 1/2 grow/shrink: 2/1 up/down: 137/-147) Total: -10 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02dhcprelay: change two more variables to unsignedDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02udhcp: clarify aspects of relay operation, add TODOs and FIXMEs, tweak --helpDenys Vlasenko
function old new delta packed_usage 33891 33920 +29 dhcprelay_main 943 926 -17 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 29/-17) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02udhcpd: check config file for bad IP ranges (start > end)Denys Vlasenko
function old new delta .rodata 104209 104238 +29 read_config 208 225 +17 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 46/0) Total: 46 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-09-02udhcpd: update --help to include -a MSECDenys Vlasenko
function old new delta packed_usage 33886 33891 +5 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-29vi: further changes to colon addressesRon Yorston
Improved error messages: - specify when a search fails or a mark isn't set; - warn when line addresses are out of range or when a range of lines is reversed. Addresses are limited to the number of lines in the file so a command like ':2000000000' (go to the two billionth line) no longer causes a long pause. Improved vi compatibility of '+' and '-' operators that aren't followed immediately by a number: :4+++= 7 :3-2= 1 :3 - 2= 4 (yes, really!) In a command like ':,$' the empty address before the separator now correctly refers to the current line. (The similar case ':1,' was already being handled.) And all with a tidy reduction in bloat (32-bit build): function old new delta colon 4029 4069 +40 .rodata 99348 99253 -95 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 40/-95) Total: -55 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-29bzip: make ftab[] and crc32table[] member arrays of EState, do not allocateDenys Vlasenko
function old new delta mainSort 941 986 +45 fallbackSort 1471 1469 -2 add_pair_to_block 194 188 -6 compressStream 543 515 -28 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/3 up/down: 45/-36) Total: 9 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-29shuf: in -i RANGE, accept numbers up to width of pointersDenys Vlasenko
function old new delta .rodata 108468 108474 +6 shuf_main 555 542 -13 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-23shuf: with -i LOW-HIGH, do not allow any argv'sDenys Vlasenko
function old new delta shuf_main 436 441 +5 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-23shuf: tweak --help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-23mount: code shrinkDenys Vlasenko
function old new delta append_mount_options 174 157 -17 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-23mount: with -w, do not fall back to read-only mountsDenys Vlasenko
function old new delta mount_it_now 364 358 -6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22tar,smemcap: silence compiler warningRon Yorston
gcc 11.2.1 complains that the tar header checksum might overflow the checksum field. It won't and using an unsigned int for the calculation seems to convince the compiler too. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22Regularize "NUL terminated input" --help textsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22shuf: speed-up when limited output is requestedRon Yorston
A user noted that the following command was slower than they expected: busybox shuf -i "1500000000-$(date +%s)" -n 5 At time of writing the range contains 128 million values. On my system this takes 7.7s whereas 'shuf' from coreutils takes a handful of milliseconds. Optimise BusyBox 'shuf' for cases where -n is specified by stopping shuffling once the required number of lines have been processed. On my system the time for the example is reduced to 0.4s. function old new delta shuf_main 520 540 +20 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0) Total: 20 bytes v2: Code shrink. Since outlines <= numlines: - the loop in shuffle_lines() only needs to test the value of outlines; - shuffle_lines() can be called unconditionally. Update timing to allow for the 13 million seconds elapsed since v1. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22vi: code shrink print_literal()Ron Yorston
Simplify the function print_literal() which is used to format a string that may contain unprintable characters or control characters. - Unprintable characters were being displayed in normal text rather than the bold used for the rest of the message. This doesn't seem particularly helpful and it upsets the calculation of the width of the message in show_status_line(). Use '?' rather than '.' for unprintable characters. - Newlines in the string were displayed as both '^J' and '$', which is somewhat redundant. function old new delta not_implemented 199 108 -91 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-91) Total: -91 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22vi: searches in colon commands should wrapRon Yorston
The '/' and '?' search commands wrap to the other end of the buffer if the search target isn't found. When searches are used to specify addresses in colon commands they should do the same. (In traditional vi and vim this behaviour is controlled by the 'wrapscan' option. BusyBox vi doesn't have this option and always uses the default behaviour.) function old new delta colon 4033 4077 +44 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 44/0) Total: 44 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-22rev: correct output for long input linesRon Yorston
The input buffer is initialised to a reasonable size and extended if necessary. When this happened the offset into the buffer wasn't reset to zero so subsequent lines were appended to the long line. Fix this and add some tests. function old new delta rev_main 377 368 -9 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-9) Total: -9 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20tar,smemcap: commonalyze checksumming code for tar headerDenys Vlasenko
function old new delta chksum_and_xwrite_tar_header - 99 +99 writeheader 280 199 -81 chksum_and_xwrite 102 - -102 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 0/1 up/down: 99/-183) Total: -84 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20vi: don't right shift empty linesRon Yorston
The right shift command ('>') shouldn't affect empty lines. function old new delta do_cmd 4860 4894 +34 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 34/0) Total: 34 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20vi: support ~/.exrcRon Yorston
Run initialisation commands from ~/.exrc. As with EXINIT these commands are processed before the first file is loaded. Commands starting with double quotes are ignored. This is how comments are often included in .exrc. function old new delta vi_main 268 406 +138 colon 4033 4071 +38 .rodata 108411 108442 +31 packed_usage 34128 34118 -10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/1 up/down: 207/-10) Total: 197 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20vi: changes to handling of -c and EXINITRon Yorston
Rewrite handling of command line arguments so any number of -c commands will be processed. Previously only two -c commands were allowed (or one if EXINIT was set). Process commands from EXINIT before the first file is read into memory, as specified by POSIX. function old new delta run_cmds - 77 +77 .rodata 108410 108411 +1 vi_main 305 268 -37 edit_file 816 764 -52 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/2 up/down: 78/-89) Total: -11 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-20udhcp: fix build breakage on MIPSDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-19Start 1.35.0 development cycleDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-19Bump version to 1.34.01_34_0Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16scripts/randomtest.loop: let user know about SKIP_MOUNT_MAND_TESTSDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16fdisk: indentation fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16busybox: fix "busybox --help busybox" not showing correct textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16awk: fix testsuiteDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16vi: fix compile-time error if !ENABLE_FEATURE_VI_SETOPTSDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-16tar: fix testsuiteDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-08-15dd: tweak --helpDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-05 06:52:47 +0000