summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-07powertop: fix cpuid asm: ebx saving/restoring is properly done by gccDenys Vlasenko
function old new delta print_intel_cstates 481 477 -4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-07libbb/sha1: optional i686 hardware accelerates hashingDenys Vlasenko
function old new delta sha1_process_block64_shaNI - 524 +524 sha1_begin 57 114 +57 .rodata 104353 104369 +16 static.shaNI - 1 +1 ------------------------------------------------------------------------------ (add/remove: 4/0 grow/shrink: 2/0 up/down: 598/0) Total: 598 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-07libbb/sha1: optional x86-64 hardware accelerates hashingDenys Vlasenko
function old new delta sha1_process_block64_shaNI - 510 +510 sha1_begin 52 107 +55 .rodata 108285 108301 +16 static.shaNI - 1 +1 ------------------------------------------------------------------------------ (add/remove: 4/0 grow/shrink: 2/0 up/down: 582/0) Total: 582 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-06fdisk: recognize EBBR protective partitionsVincent Stehlé
The MBR partition type 0xF8 is used by the Arm EBBR specification[1] for protective partitions over fixed-location firmware images. [1]: https://github.com/ARM-software/ebbr Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-05libbb: change xstrndup, xmemdup to take size_t as size parameterDenys Vlasenko
Also, remove entirely usually-disabled paranoia check (was also using wrong config option to enable itself). Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-05libbb: code shrink: introduce and use [_]exit_SUCCESS()Denys Vlasenko
function old new delta exit_SUCCESS - 7 +7 _exit_SUCCESS - 7 +7 run_pipe 1562 1567 +5 pseudo_exec_argv 399 400 +1 finish 86 87 +1 start_stop_daemon_main 1109 1107 -2 shutdown_on_signal 38 36 -2 runsv_main 1662 1660 -2 redirect 1070 1068 -2 read_line 79 77 -2 pause_and_low_level_reboot 54 52 -2 list_i2c_busses_and_exit 483 481 -2 less_exit 12 10 -2 identify 4123 4121 -2 grep_file 1161 1159 -2 getty_main 1519 1517 -2 fsck_minix_main 2681 2679 -2 free_session 132 130 -2 fdisk_main 4739 4737 -2 clean_up_and_exit 53 51 -2 bsd_select 1566 1564 -2 bb_daemonize_or_rexec 198 196 -2 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 3/17 up/down: 21/-34) Total: -13 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-05less: code shrinkDenys Vlasenko
function old new delta restore_tty - 29 +29 less_main 2107 2105 -2 getch_nowait 253 251 -2 buffer_print 614 612 -2 less_exit 51 12 -39 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/4 up/down: 29/-45) Total: -16 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-05sort: support -hDenys Vlasenko
function old new delta static.scale_suffix - 62 +62 .rodata 104304 104336 +32 compare_keys 820 848 +28 packed_usage 34159 34184 +25 static.suffix - 9 +9 sort_opt_str 37 38 +1 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 4/0 up/down: 157/0) Total: 157 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04sort: fix -s -r interaction: 'stable' order is not affected by -rDenys Vlasenko
function old new delta compare_keys 818 820 +2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04libbb: fflush_stdout_and_exit(0) still exits with _error_ (not 0!) if fflush ↵Denys Vlasenko
fails function old new delta fflush_stdout_and_exit 36 40 +4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04libbb: factor out fflush_stdout_and_exit(EXIT_SUCCESS)Denys Vlasenko
function old new delta fflush_stdout_and_exit_SUCCESS - 7 +7 xxd_main 890 888 -2 vlock_main 353 351 -2 uuencode_main 318 316 -2 uniq_main 427 425 -2 uname_main 250 248 -2 sort_main 853 851 -2 shuf_main 500 498 -2 route_main 238 236 -2 readlink_main 113 111 -2 nice_main 156 154 -2 last_main 957 955 -2 ipcs_main 960 958 -2 env_main 209 207 -2 chrt_main 464 462 -2 cal_main 921 919 -2 baseNUM_main 650 648 -2 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/16 up/down: 7/-32) Total: -25 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04sed: correctly handle 'w FILE' commands writing to the same fileDenys Vlasenko
function old new delta sed_xfopen_w - 84 +84 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04build system: detect if build host has no bzip2Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04libbb/sha1: x86_64 version: reorder prologue/epilogue insnsDenys Vlasenko
Not clear exactly why, but this increases hashing speed on Skylake from 454 MB/s to 464 MB/s. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-04md5/shaXsum: use FEATURE_COPYBUF_KB to size the buffer instead of fixed 4kDenys Vlasenko
function old new delta md5_sha1_sum_main 536 565 +29 hash_file 419 401 -18 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 29/-18) Total: 11 bytes In my test, for unrolled sha1, COPYBUF_KB=64 increases throughput from 367 MB/s to 457 MB/s. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-03libbb/sha1: x86_64 version: tidying up, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-03typo fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-03libbb/sha1: x86_64 version: generate from a script, optimize a bitDenys Vlasenko
function old new delta sha1_process_block64 3569 3502 -67 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-03libbb/sha1: x86_64 version: move to a separate .S file, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-02libbb/sha1: code shrink in medium-speed versionDenys Vlasenko
function old new delta sha1_process_block64 654 641 -13 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-01libbb/sha1: x86_64 version: bswap in 64-bit chunksDenys Vlasenko
function old new delta sha1_process_block64 3562 3570 +8 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-01libbb/sha1: shrink x86_64 version - use r8..15 for W[8..15]Denys Vlasenko
function old new delta sha1_process_block64 3683 3562 -121 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2022-01-01libbb/sha1: assembly versions for x86Denys Vlasenko
32 bits: function old new delta sha1_process_block64 3950 3657 -293 64 bits: sha1_process_block64 4167 3683 -484 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-31libbb/sha1: shrink and speed up fully unrolled versionDenys Vlasenko
function old new delta sha1_process_block64 4149 3950 -199 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-30libbb/sha1: add config-selectable partially unrolled versionDenys Vlasenko
function old new delta sha1_process_block64 364 732 +368 static.rconsts 16 - -16 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/0 up/down: 368/-16) Total: 352 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-30libbb/sha1: add config-selectable fully unrolled version, closes 14391Denys Vlasenko
function old new delta sha1_process_block64 364 4167 +3803 static.rconsts 16 - -16 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/0 up/down: 3803/-16) Total: 3787 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-29ed: add support for -s command-line option as mandated by POSIXSören Tempel
Apart from the -p option, POSIX also mandates an -s option which suppresses the output of byte counts for the e, E, r, and w command. From these commands, Busybox ed presently only implements the r and w commands. This commit ensures that these two command do not output any bytes counts when the -s option is passed. The shell escape command, also effected by the -s option, is not implemented by Busybox at the moment. function old new delta packed_usage 34096 34115 +19 doCommands 1887 1900 +13 readLines 388 397 +9 .rodata 104196 104200 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/0 up/down: 45/0) Total: 45 bytes Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-29echo: add FIXME commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-28scripts/echo.c: fix NUL handling in "abc\0 def"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-28libbb: cose shrink in sha1Denys Vlasenko
function old new delta sha1_process_block64 356 342 -14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-26Start 1.36.0 development cycleDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-26Bump version to 1.35.01_35_01_35_stableDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-26httpd: fix compile failure if !FEATURE_HTTPD_RANGESDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-25sed: do not ignore 'g' modifier when match starts with ^Dominique Martinet
It is perfectly valid to start a regex with ^ and have other patterns with \| that can match more than once, e.g. the following example should print ca, as illustrated with gnu sed: $ echo 'abca' | sed -e 's/^a\|b//g' ca busybox before patch: $ echo 'abca' | busybox sed -e 's/^a\|b//g' bca busybox after patch: $ echo 'abca' | ./busybox sed -e 's/^a\|b//g' ca regcomp handles ^ perfectly well as illustrated with the second 'a' that did not match in the example, we ca leave the non-repeating to it if appropriate. The check had been added before using regcomp and was required at the time (f36635cec6da) but no longer makes sense now. (tested with glibc and musl libc) function old new delta add_cmd 1189 1176 -13 Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-19ed: align output of read command with POSIX.1-2008Sören Tempel
POSIX.1-2008 mandates the following regarding the read command: If the read is successful, and -s was not specified, the number of bytes read shall be written to standard output in the following format: "%d\n", <number of bytes read> This commit aligns the output of busybox ed with POSIX.1-2008 by removing the file name from the output for the read command. This slipped through in 4836a0708fd0aaeb82871a3762b40fcf4b61e812. function old new delta .rodata 104203 104196 -7 readLines 409 388 -21 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-28) Total: -28 bytes Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-19ed: fix current line number for file passed via the command-lineSören Tempel
POSIX.1-2008 mandates the following regarding the file command-line argument: If the file argument is given, ed shall simulate an e command on the file named by the pathname […] The specification for the e command mandates the following behaviour regarding the current line number in POSIX.1-2008: The current line number shall be set to the address of the last line of the buffer. However, without this commit, busybox ed will set the current line number to 1 if a file is given on the command-line and this file is not empty (lastNum != 0). This is incorrect and fixed in this commit by not modifying the current line number in ed_main(). As such, the current line number will be zero for empty files and otherwise be set to the address of the last line of the buffer. function old new delta ed_main 144 128 -16 Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17timeout: add support for "timeout -k KILL_SECS"Matthew Slowe
function old new delta timeout_main 307 373 +66 timeout_wait - 42 +42 .rodata 104201 104203 +2 packed_usage 34097 34096 -1 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/1 up/down: 110/-1) Total: 109 bytes Signed-off-by: Matthew Slowe <foo@mafoo.org.uk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17cmp: code shrinkDenys Vlasenko
function old new delta .rodata 104203 104201 -2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17ed: add support for -p command-line option as mandated by POSIXSören Tempel
The POSIX.1-2008 specification of ed(1) mandates two command-line options: -p (for specifying a prompt string) and -s (to suppress writing of byte counts). This commit adds support for the former. Furthermore, it also changes the default prompt string to an empty string (instead of ": ") since this is also mandated by POSIX: -p string Use string as the prompt string when in command mode. By default, there shall be no prompt string. function old new delta ed_main 112 144 +32 packed_usage 34074 34097 +23 doCommands 1889 1887 -2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 55/-2) Total: 53 bytes Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17cmp: add support for -nWalter Lozano
Add support to for "-n" to cmp in order to compare at most n bytes. function old new delta cmp_main 552 589 +37 .rodata 104198 104203 +5 packed_usage 34102 34074 -28 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 42/-28) Total: 14 bytes Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17docs/embedded-scripts.txt: whitespace fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17find: implement -samefileAaro Koskinen
function old new delta parse_params 1461 1606 +145 func_samefile - 42 +42 packed_usage 34079 34102 +23 static.params 261 271 +10 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/0 up/down: 220/0) Total: 220 bytes Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17printf: allow 0 as a flag and allow multiple flagsRon Yorston
The '%' character in a format specification may be followed by one or more flags from the list "+- #0". BusyBox printf didn't support the '0' flag or allow multiple flags to be provided. As a result the formats '%0*d' and '%0 d' were considered to be invalid. The lack of support for '0' was pointed out by Andrew Snyder on the musl mailing list: https://www.openwall.com/lists/musl/2021/12/14/2 function old new delta printf_main 860 891 +31 .rodata 99281 99282 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 32/0) Total: 32 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17httpd: do not send Last-Modified / ETag / Content-Length for error pagesDenys Vlasenko
function old new delta send_headers 713 701 -12 send_headers_and_exit 20 34 +14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-17httpd: don't send Content-Length in error pages headerDenys Vlasenko
function old new delta send_headers 701 713 +12 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12libarchive/get_header_ar.c: fix extraction of archives from binutils in ↵Peter Korsgaard
deterministic mode GNU binutils in deterministic mode (ar rD or built with --enable-deterministic-archives) hard codes file mode to 0644 (NOT 0100644) since https://github.com/bminor/binutils-gdb/commit/36e4dce69dd2 This confuses busybox ar x (data_extract_all): touch a; ar rD a.ar a ar: creating a.ar busybox ar x a.ar ar: unrecognized file type hexdump -C a.ar 00000000 21 3c 61 72 63 68 3e 0a 61 2f 20 20 20 20 20 20 |!<arch>.a/ | 00000010 20 20 20 20 20 20 20 20 30 20 20 20 20 20 20 20 | 0 | 00000020 20 20 20 20 30 20 20 20 20 20 30 20 20 20 20 20 | 0 0 | 00000030 36 34 34 20 20 20 20 20 30 20 20 20 20 20 20 20 |644 0 | 00000040 20 20 60 0a | `.| As a workaround, force the mode bits to S_IFREG, as nothing else makes sense for ar. function old new delta get_header_ar 539 542 +3 Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12udhcpc6: fix udhcp_find_option to actually find DHCP6 optionsDenys Vlasenko
udhcp_insert_new_option treats code for IPv6 as follows: new->data[D6_OPT_CODE] = code >> 8; new->data[D6_OPT_CODE + 1] = code & 0xff; udhcp_find_option tests the code as follows: while (opt_list && opt_list->data[OPT_CODE] < code) ... if (opt_list && opt_list->data[OPT_CODE] == code) So yes, OPT_CODE and D6_OPT_CODE are both 0, but the D6_OPT_CLIENTID = 1 value means that the 1 is in the seconds byte, and udhcp_find_option is only looking at the first byte, So the send_d6_release can never find it the created option. function old new delta udhcp_find_option 28 53 +25 attach_option 276 284 +8 udhcpc6_main 2602 2607 +5 perform_d6_release 262 267 +5 udhcpd_main 1518 1520 +2 udhcpc_main 2542 2544 +2 add_serverid_and_clientid_options 46 48 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/0 up/down: 49/0) Total: 49 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12Makefile.flags: use all cflags for crypt and rt checksMartin Kaiser
To check if libcrypt and librt are available, we check if we can compile and link a simple test program. These checks do not match the actual linking if CONFIG_STATIC is enabled. For CONFIG_STATIC, CFLAGS_busybox is set to -static. The checks don't use CFLAGS_busybox and detect a shared libcrypt or librt. If we link busybox later and we have no static libcrypt or librt, linking will fail. Update the libcrypt and librt checks to use CFLAGS_busybox. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12wget: allow end-users to customize Content-Type for --post-data and --post-fileIldar Shaimordanov
More explanation in this PR: https://github.com/rmyorston/busybox-w32/pull/233 The real use-case: wget https://api.github.com/markdown/raw --header "Content-Type: text/plain" function old new delta wget_main 2560 2581 +21 wget_user_headers 62 76 +14 .rodata 104196 104197 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 36/0) Total: 36 bytes Signed-off-by: Ildar Shaimordanov <ildar.shaimordanov@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-12-12uudecode: special-case "/dev/stdout", closes 14241Denys Vlasenko
function old new delta uudecode_main 295 322 +27 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-01 22:39:43 +0000