summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-09dhcpc: refactor xmalloc_optname_optval to shrink binary sizeMartin Lewis
function old new delta len_of_option_as_string 14 13 -1 dhcp_option_lengths 14 13 -1 udhcp_str2optset 641 637 -4 static.xmalloc_optname_optval 777 718 -59 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65) Total: -65 bytes Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09httpd: allow '-h' to work when daemonized with NOMMU enabledRon Yorston
Commit d1b75e184 (httpd: permit non-default home directory with NOMMU enabled) only works when used with the '-f' (foreground) option. When '-f' isn't specified and NOMMU is enabled bb_daemonize_or_rexec() is called to daemonize the server. Since the server process has been re-execed the previous patch results in the xchdir() not being called. Fix this by resetting the re_execed variable in this case. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09udhcp: comment out unused domain compression codeDenys Vlasenko
function old new delta attach_option 411 406 -5 dname_enc 381 167 -214 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-219) Total: -219 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09sysctl: do report EACCES errors on writeDenys Vlasenko
function old new delta sysctl_act_recursive 165 179 +14 sysctl_act_on_setting 467 471 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09unexpand: correct behavior for --first-only --tabs=4Mark Edgar
Prior to the patch, both -f and --first-only are in all cases either no-op or ignored. Without --tabs, --first-only is the default so specifying it is a no-op. With --tabs, --all is implied, and --first-only is intended to reset this. function old new delta expand_main 690 694 +4 Signed-off-by: Mark Edgar <medgar123@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09xstrndup: Use strndup instead of implementing it.Martin Lewis
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09dhcpc: code shrink in good_hostnameMartin Lewis
Incorporated valid_domain_label into good_hostname to simplify the implementation. function old new delta static.xmalloc_optname_optval 973 958 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15) Total: -15 bytes text data bss dec hex filename 993144 16915 1872 1011931 f70db busybox_old 993129 16915 1872 1011916 f70cc busybox_unstripped Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-09awk: disallow "str"++, closes bug 12981Denys Vlasenko
function old new delta parse_expr 887 896 +9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-05-20wget: implement TLS verification with ENABLE_FEATURE_WGET_OPENSSLDimitri John Ledkov
When ENABLE_FEATURE_WGET_OPENSSL is enabled, correctly implement TLS verification by default. And only ignore verification errors, if --no-check-certificate was passed. Also note, that previously OPENSSL implementation did not implement TLS verification, nor printed any warning messages that verification was not performed. Bug-Ubuntu: https://bugs.launchpad.net/bugs/1879533 CVE-2018-1000500 Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-30ash,hush: drop pointer check before calls to show_historyRon Yorston
show_history() checks that its argument in non-null so there's no need to repeat the test at call sites. function old new delta historycmd 25 17 -8 builtin_history 29 21 -8 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-16) Total: -16 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-30mim: run scripts from a specification fileRon Yorston
mim runs scripts from a specification file which can be thought of as an extremely limited Makefile. Neither make variables nor dependencies are supported. By default the file 'Mimfile' is read. An example: hello: echo hello $1 clean: rm -rf * The command 'mim' or 'mim hello' will echo 'hello'. Unlike 'make' arguments after the first are available to the script; they don't specify additional targets. mim isn't enabled by default. Enabling it increases the size of the binary by about 500 bytes. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-30ash: fix build failure when command built-in is disabledRon Yorston
Since commit 7eb8eecbb (ash: eval: Add assignment built-in support again) building BusyBox with the 'command' built-in disabled fails. parse_command_args() only needs to be called when the 'command' built-in is run. Which it won't be if it's disabled. v2: Avoiding infinite loops is good, too. Thanks, Harald van Dijk. Reported-by: Deweloper <deweloper@wp.pl> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-30httpd: permit non-default home directory with NOMMU enabledRon Yorston
When BusyBox is compiled with NOMMU enabled running httpd with the '-h' option fails even if the specified directory exists: $ ls -d www www $ busybox httpd -fvvvp 8080 -h www ... ... try to access http://localhost:8080/www ... httpd: can't change directory to 'www': No such file or directory The parent process executes xchdir("www"). When a connection is accepted it's handled by re-executing httpd in inetd mode. The child process inherits the current directory "www" and tries to change directory again to "www", which fails. Omit the call to xchdir() when httpd is re-executed. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-30grep: add proper support for pattern_listSören Tempel
From POSIX.1-2008: The pattern_list's value shall consist of one or more patterns separated by <newline> characters; As such, given patterns need to be split at newline characters. Without doing so, busybox grep will interpret the newline as part of the pattern which is not in accordance with POSIX. See also: https://bugs.busybox.net/show_bug.cgi?id=12721 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-29grep: Fix -f FILE when FILE is empty and -x providedGray Wolf
Grep currently special-cased empty pattern file to be the same as pattern file with one empty line (empty pattern). That does mirror how GNU grep behaves, except when -x is provided. In that case .* pattern needs to be used instead. Signed-off-by: Gray Wolf <wolf@wolfsden.cz> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-29xargs: restore correct behaviour of -n optionRon Yorston
Since commit 1ff7002b1 (xargs: fix handling of quoted arguments, closes 11441) the -n option hasn't worked properly: $ echo 1 2 3 | xargs -n 1 echo 1 2 3 $ Because state is now remembered between calls to process_stdin() it's necessary to update the state before any premature return. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-29build system: remove KBUILD_STR()Jean-Philippe Brucker
When using GNU Make >=4.3, the KBUILD_STR() definition interferes badly with dependency checks during build, and forces a complete rebuild every time Make runs. In if_changed_rule, Kconfig checks if the command used to build a file has changed since last execution. The previous command is stored in the generated .<file>.o.cmd file. For example applets/.applets.o.cmd defines a "cmd_applets/applets.o" variable: cmd_applets/applets.o := gcc ... -D"KBUILD_STR(s)=#s" ... Here the '#' should be escaped with a backslash, otherwise GNU Make interprets it as starting a comment, and ignore the rest of the variable. As a result of this truncation, the previous command doesn't equal the new command and Make rebuilds each target. The problem started to appear when GNU Make 4.3 (released January 2020), introduced a backward-incompatible fix to macros containing a '#'. While the above use of '#', a simple Make variable, still needs to be escaped, a '#' within a function invocation doesn't need to be escaped anymore. As Martin Dorey explained on the GNU Make discussion [1], the above declaration is generated from make-cmd, defined as: make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))) Since GNU Make 4.3, the first argument of subst should not have a backslash. make-cmd now looks for literally \# and doesn't find it, and as a result doesn't add the backslash when generating .o.cmd files. [1] http://savannah.gnu.org/bugs/?20513 We could fix it by changing make-cmd to "$(subst #,\#,...)", but to avoid compatibility headaches, simply get rid of the KBUILD_STR definition, as done in Linux by b42841b7bb62 ("kbuild: Get rid of KBUILD_STR"). Quote the string arguments directly rather than asking the preprocessor to quote them. Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-04-29unzip: -d should create the dirLauri Kasanen
The official Info-Zip unzip creates the dir if it doesn't exist. Signed-off-by: Lauri Kasanen <cand@gmx.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-26shells: fix exitcode_trapN tests to avoid racesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-24ash: expand: Fix multiple issues with EXP_DISCARD in evalvarDenys Vlasenko
Upstream commit: Date: Wed, 12 Sep 2018 14:27:16 +0800 expand: Fix multiple issues with EXP_DISCARD in evalvar The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter expansion in multiple ways because the EXP_DISCARD flag wasn't set or tested for various cases: $ src/dash -c 'var=; echo ${var:+nonempty}' nonempty $ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}' dash: 1: bar: parameter not set $ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo' barBUG bar $ This patch fixes them by introducing a new discard variable that tracks whether the extra word should be discarded or not when it is parsed. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: 3cd538634f71 ("expand: Do not reprocess data when...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Martijn Dekker <martijn@inlv.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-24ash: expand: Do not reprocess data when expanding wordsDenys Vlasenko
Upstream patch: Date: Wed, 30 May 2018 02:06:03 +0800 expand: Do not reprocess data when expanding words Currently various paths will reprocess data when performing word expansion. For example, expari will skip backwards looking for the start of the arithmetic expansion, while evalvar will skip unexpanded words manually. This is cumbersome and error-prone. This patch fixes this by making word expansions proceed in a linear fashion. This means changing argstr and the various expansion functions such as expari and subevalvar to return the next character to be expanded. This is inspired by similar code from FreeBSD. However, we take things one step further and completely remove the manual word skipping in evalvar. This is accomplished by introducing a new EXP_DISCARD flag that tells argstr to only parse and not produce any actual expansions. Incidentally, argstr will now always NUL-terminate the expansion unless the EXP_WORD flag is set. This is because all but one caller of argstr wants the result to be NUL-termianted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Also includes two one-line follow-up fixes: expand: Eat closing brace for length parameter if (subtype == VSLENGTH) { + p++; if (flag & EXP_DISCARD) expand: Fix double-decrement in argstr - newloc = expdest - (char *)stackblock() - end; + newloc = q - (char *)stackblock() - end; and changes in code for bash substring extensions. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-24ash: move TRACE statement in evalcommand()Ron Yorston
Following recent work on evalcommand() a TRACE statement to report the status of a forked command was left in the wrong place. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-24ash: rename some function parameters to match dashDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-24ash: rename stack_nputstr() back to stnputs() to match dashDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-22ash: Expand here-documents in the current shell environmentDenys Vlasenko
Upstream commit: Date: Sun, 11 Nov 2007 15:27:00 +0800 Expand here-documents in the current shell environment Previously we always expanded here-documents in a subshell. This is contrary to the POSIX specification and how other shells behave. What's more this slows down many expansions due to the extra fork (however, it must be said that it is possible for it speed up certain expansions by running it simultaneously with the command on two CPUs). This patch move the expansion into the current shell environment. Test case: unset a cat <<- EOF > /dev/null ${a=NOT} EOF echo ${a}BAD Old result: BAD New result: NOTBAD Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-22ash: parser: Do not push token back before parseheredocDenys Vlasenko
Upstream commit: Date: Mon, 19 Nov 2018 18:43:58 +0800 parser: Do not push token back before parseheredoc When we read the first token in list() we use peektoken instead of readtoken as the following code needs to use the same token again. However, this is wrong when we're in a here-document as it will clobber the saved token without resetting the tokpushback flag. This patch fixes it by doing the tokpushback after parseheredoc and setting lasttoken again if parseheredoc was called. Reported-by: Ron Yorston <rmy@frippery.org> Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...") Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Simon Ser <contact@emersion.fr> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-22ash: parser: Fix old-style command substitution here-document crashDenys Vlasenko
Upstream commit: Date: Fri, 29 Mar 2019 13:49:59 +0800 parser: Fix old-style command substitution here-document crash ... This is caused by the recent change to save/restore here-docment list around command substitutions. In doing so we must finish existing here-documents prior to restoring the old here-document list. This is done for new-style command substitutions but not for old-style. This patch fixes it by doing it for both. Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-21hush: fix negative_arith.tests: glob-protect dash in "$((arith))"Denys Vlasenko
function old new delta expand_vars_to_list 1026 1082 +56 parse_dollar 810 811 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 57/0) Total: 57 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-21ash: expand: Ensure result is escaped in cvtnumDenys Vlasenko
Upstream commit: Date: Fri, 1 Jun 2018 18:25:29 +0800 expand: Ensure result is escaped in cvtnum The minus sign generated from arithmetic expansion is currently unquoted which causes anomalies when the result is used in where the quoting matters. This patch fixes it by explicitly calling memtodest on the result in cvtnum. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-21ash: memalloc: Avoid looping in growstacktoDenys Vlasenko
Upstream commit: Date: Thu, 31 May 2018 01:51:48 +0800 memalloc: Avoid looping in growstackto Currently growstackto will repeatedly call growstackblock until the requisite size is obtained. This is wasteful. This patch changes growstackblock to take a minimum size instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-21hush: make "exit" in trap use pre-trap exitcode - fix for nested trapDenys Vlasenko
function old new delta check_and_run_traps 276 278 +2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-21hush: make "exit" in trap use pre-trap exitcodeDenys Vlasenko
function old new delta check_and_run_traps 259 276 +17 builtin_exit 42 53 +11 hush_main 1086 1096 +10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 38/0) Total: 38 bytes Fixes exitcode_trap2.tests. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: eval: Only restore exit status on exit/returnDenys Vlasenko
Upstream commit: Date: Fri, 14 Dec 2018 13:52:02 +0800 eval: Only restore exit status on exit/return We unconditionally restore the saved status in exitreset, which is incorrect as we only want to do it for exitcmd and returncmd. This patch fixes the problem by introducing EXEND. Reported-by: Martijn Dekker <martijn@inlv.org> Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: Return without arguments in a trap should use status outside trapsDenys Vlasenko
Fixes exitcode_trap4.tests. Upstream commit: Date: Mon, 6 Oct 2014 21:51:26 +0800 Return without arguments in a trap should use status outside traps POSIX now requires that return without arguments in a trap should return the last command status prior to executing traps. This patch implements this behaviour. Incidentally this also changes the behaviour of return without arguments in a loop conditional to use the last exit status in the body as opposed to the last command in the conditional when there is one. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20hush: implement "return NUM in trap sets $? after trap"Denys Vlasenko
function old new delta builtin_return 47 67 +20 check_and_run_traps 243 259 +16 run_pipe 1583 1597 +14 hush_main 1076 1086 +10 run_list 1054 1055 +1 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 61/0) Total: 61 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: return exit status of nofork applets (again)Ron Yorston
Since commit d81af7216 (ash: eval: Reap zombies after built-in commands and functions) if the shell is compiled with SH_STANDALONE and SH_NOFORK enabled nofork applets potentially return the incorrect status. The status value returned by evalcommand() in this case is obtained from exitstatus in a call to waitforjob(NULL). This overwrites the status set for nonfork applets. If this commit seems familiar it's essentially a reversion of commit 5ccb0e92fa (ash: return exit status of nofork applets). What was correct in 2016 is wrong in 2020 and vice versa. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: expand: Merge syntax/quotes in memtodest with flagsDenys Vlasenko
Upstream commit: Date: Mon, 28 May 2018 00:17:39 +0800 expand: Merge syntax/quotes in memtodest with flags The function arguments syntax and quotes are both derived from the expansion flags. As syntax is only used by memtodest we do not need to maintain it outside of the function at all. The only place that uses something other than BASESYNTAX or DQSYNTAX is exptilde. However in that case DQSYNTAX has exactly the same effect as SQSYNTAX. This patch merges these two arguments into a single flags. The macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order to keep the namespace separate. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: eval: Always set localvar_stopDenys Vlasenko
Upstream commit: Date: Thu, 31 May 2018 01:15:34 +0800 eval: Always set localvar_stop The variable localvar_stop is set iff vlocal is true. gcc doesn't get this so we get a spurious warning. This patch fixes this by always calling pushlocalvars with vlocal and making it only actually do the push if vlocal is non-zero. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: eval: Replace with listsetvar with mklocal/setvareqDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:55 +0800 eval: Replace with listsetvar with mklocal/setvareq This patch replaces listsetvar with mklocal/setvareq. As we now determine special built-in status prior to variable assignment, we no longer have to do a second pass listsetvar. Instead we will call setvareq directly instead of mklocal when necessary. In order to do this mklocal can now take a flag in order to mark a variable for export. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: eval: Fail immediately with redirections errors for simple commandDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:54 +0800 eval: Fail immediately with redirections errors for simple command Previously, dash would continue to perform variable expansions even if a redirection error occured. This patch changes it so that it fails immediately. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20ash: eval: Add assignment built-in support againDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:52 +0800 eval: Add assignment built-in support again This patch adds assignment built-in support that used to exist in dash prior to 0.3.8-15. This is because it will soon be part of POSIX, and the semantics are now much better defined. Recognition is done at execution time, so even "command -- export" or "var=export; command $var" should work. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-19ash,hush: testcase for "exit" without arguments in a trapDenys Vlasenko
hush fails this one Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18ash,hush: add comment about masked SIGCHLD, handle SIG_IGNed SIGHUP as in bashDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18ash: jobs: Only clear gotsigchld when waiting for everythingDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:41 +0800 jobs: Only clear gotsigchld when waiting for everything The gotsigchld flag is always cleared in dowait but not all callers of dowait will wait for everything. In particular, when jp is set we only wait until the set job isn't running anymore. This patch fixes this by only clearing gotsigchld if jp is unset. It also changes the waitcmd to actually set jp which corresponds to the behaviour of bash/ksh93/mksh. The only other caller of dowait that doesn't wait for everything is the jobless reaper. This is in fact redundant now that we wait after every simple command. This patch removes it. Finally as every caller of dowait needs to wait until either the given job is not running, or until all terminated jobs have been processed, this patch moves the loop into dowait itself. Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18ash: jobs - Do not block when waiting on SIGCHLDDenys Vlasenko
Upstream comment: Date: Mon, 7 May 2018 00:40:34 +0800 jobs - Do not block when waiting on SIGCHLD Because of the nature of SIGCHLD, the process may have already been waited on and therefore we must be prepared for the case that wait may block. So ensure that it doesn't by using WNOHANG. Furthermore, multiple jobs may have exited when gotsigchld is set. Therefore we need to wait until there are no zombies left. Lastly, waitforjob needs to be called with interrupts off and the original patch broke that. Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> While at it, removed INT_ON/OFF in waitforjob() - it must be called from INT_OFF region anyway. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18ash: eval: Reap zombies after built-in commands and functionsDenys Vlasenko
Upstream commit: Date: Mon, 26 Mar 2018 23:55:50 +0800 eval: Reap zombies after built-in commands and functions Currently dash does not reap dead children after built-in commands or functions. This means that if you construct a loop consisting of solely built-in commands and functions, then zombies can hang around indefinitely. This patch fixes this by reaping when necessary after each built-in command and function. Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17ash: exec: Never rehash regular built-insDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:51 +0800 exec: Never rehash regular built-ins As regular (including special) built-ins can never be overridden, we should never remove them from the hash table. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17ash: exec: Stricter pathopt parsingDenys Vlasenko
Upstream comment: Date: Sat, 19 May 2018 02:39:50 +0800 exec: Stricter pathopt parsing This patch changes the parsing of pathopt. First of all only %builtin and %func (with arbitrary suffixes) will be recognised. Any other pathopt will be treated as a normal directory. Furthermore, pathopt can now be specified before the directory, rather than after it. In fact, a future version may remove support for pathopt suffixes. Wherever the pathopt is placed, an optional % may be placed after it to terminate the pathopt. This is so that it is less likely that a genuine directory containing a % sign is parsed as a pathopt. Users of padvance outside of exec.c have also been modified: 1) cd(1) will always treat % characters as part of the path. 2) chkmail will continue to accept arbitrary pathopt. 3) find_dot_file will ignore the %builtin pathopt instead of trying to do a stat in the accompanying directory (which is usually the current directory). The patch also removes the clearcmdentry optimisation where we attempt to only partially flush the table where possible. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17ash: exec: Do not allocate stack string in padvanceDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:48 +0800 exec: Do not allocate stack string in padvance Many callers of padvance immediately free the allocated string so this patch moves the stalloc call to the caller. Instead of returning the allocated string, padvance now returns the length to allocate (this may be longer than the actual string length, even including the NUL). For the case where we would previously return NULL, we now return -1. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17ash: memalloc: Add growstackto helperDenys Vlasenko
Upstream commit: Date: Sat, 19 May 2018 02:39:46 +0800 memalloc: Add growstackto helper This patch adds the growstackto helper which repeatedly calls growstackblock until the requested size is reached. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.1 at 2024-11-07 10:38:49 +0000