diff options
Diffstat (limited to 'util-linux')
41 files changed, 622 insertions, 555 deletions
diff --git a/util-linux/Config.src b/util-linux/Config.src index 9bef0d5..3c522f9 100644 --- a/util-linux/Config.src +++ b/util-linux/Config.src @@ -7,511 +7,6 @@ menu "Linux System Utilities" INSERT -config ACPID - bool "acpid" - default y - select PLATFORM_LINUX - help - acpid listens to ACPI events coming either in textual form from - /proc/acpi/event (though it is marked deprecated it is still widely - used and _is_ a standard) or in binary form from specified evdevs - (just use /dev/input/event*). - - It parses the event to retrieve ACTION and a possible PARAMETER. - It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts - (if the resulting path is a directory) or directly as an executable. - - N.B. acpid relies on run-parts so have the latter installed. - -config FEATURE_ACPID_COMPAT - bool "Accept and ignore redundant options" - default y - depends on ACPID - help - Accept and ignore compatibility options -g -m -s -S -v. - -config BLKID - bool "blkid" - default y - select PLATFORM_LINUX - select VOLUMEID - help - Lists labels and UUIDs of all filesystems. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config FEATURE_BLKID_TYPE - bool "Print filesystem type" - default n - depends on BLKID - help - Show TYPE="filesystem type" - -config DMESG - bool "dmesg" - default y - select PLATFORM_LINUX - help - dmesg is used to examine or control the kernel ring buffer. When the - Linux kernel prints messages to the system log, they are stored in - the kernel ring buffer. You can use dmesg to print the kernel's ring - buffer, clear the kernel ring buffer, change the size of the kernel - ring buffer, and change the priority level at which kernel messages - are also logged to the system console. Enable this option if you - wish to enable the 'dmesg' utility. - -config FEATURE_DMESG_PRETTY - bool "Pretty dmesg output" - default y - depends on DMESG - help - If you wish to scrub the syslog level from the output, say 'Y' here. - The syslog level is a string prefixed to every line with the form - "<#>". - - With this option you will see: - # dmesg - Linux version 2.6.17.4 ..... - BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - - Without this option you will see: - # dmesg - <5>Linux version 2.6.17.4 ..... - <6>BIOS-provided physical RAM map: - <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - -config FBSET - bool "fbset" - default y - select PLATFORM_LINUX - help - fbset is used to show or change the settings of a Linux frame buffer - device. The frame buffer device provides a simple and unique - interface to access a graphics display. Enable this option - if you wish to enable the 'fbset' utility. - -config FEATURE_FBSET_FANCY - bool "Turn on extra fbset options" - default y - depends on FBSET - help - This option enables extended fbset options, allowing one to set the - framebuffer size, color depth, etc. interface to access a graphics - display. Enable this option if you wish to enable extended fbset - options. - -config FEATURE_FBSET_READMODE - bool "Turn on fbset readmode support" - default y - depends on FBSET - help - This option allows fbset to read the video mode database stored by - default as /etc/fb.modes, which can be used to set frame buffer - device to pre-defined video modes. - -config FDFLUSH - bool "fdflush" - default y - select PLATFORM_LINUX - help - fdflush is only needed when changing media on slightly-broken - removable media drives. It is used to make Linux believe that a - hardware disk-change switch has been actuated, which causes Linux to - forget anything it has cached from the previous media. If you have - such a slightly-broken drive, you will need to run fdflush every time - you change a disk. Most people have working hardware and can safely - leave this disabled. - -config FDFORMAT - bool "fdformat" - default y - select PLATFORM_LINUX - help - fdformat is used to low-level format a floppy disk. - -config FDISK - bool "fdisk" - default y - select PLATFORM_LINUX - help - The fdisk utility is used to divide hard disks into one or more - logical disks, which are generally called partitions. This utility - can be used to list and edit the set of partitions or BSD style - 'disk slices' that are defined on a hard drive. - -config FDISK_SUPPORT_LARGE_DISKS - bool "Support over 4GB disks" - default y - depends on FDISK - depends on !LFS # with LFS no special code is needed - help - Enable this option to support large disks > 4GB. - -config FEATURE_FDISK_WRITABLE - bool "Write support" - default y - depends on FDISK - help - Enabling this option allows you to create or change a partition table - and write those changes out to disk. If you leave this option - disabled, you will only be able to view the partition table. - -config FEATURE_AIX_LABEL - bool "Support AIX disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change AIX disklabels. - Most people can safely leave this option disabled. - -config FEATURE_SGI_LABEL - bool "Support SGI disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SGI disklabels. - Most people can safely leave this option disabled. - -config FEATURE_SUN_LABEL - bool "Support SUN disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SUN disklabels. - Most people can safely leave this option disabled. - -config FEATURE_OSF_LABEL - bool "Support BSD disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change BSD disklabels - and define and edit BSD disk slices. - -config FEATURE_GPT_LABEL - bool "Support GPT disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to view GUID Partition Table - disklabels. - -config FEATURE_FDISK_ADVANCED - bool "Support expert mode" - default y - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to do terribly unsafe things like - define arbitrary drive geometry, move the beginning of data in a - partition, and similarly evil things. Unless you have a very good - reason you would be wise to leave this disabled. - -config FINDFS - bool "findfs" - default y - select PLATFORM_LINUX - select VOLUMEID - help - Prints the name of a filesystem with given label or UUID. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config FLOCK - bool "flock" - default y - help - Manage locks from shell scripts - -config FREERAMDISK - bool "freeramdisk" - default y - select PLATFORM_LINUX - help - Linux allows you to create ramdisks. This utility allows you to - delete them and completely free all memory that was used for the - ramdisk. For example, if you boot Linux into a ramdisk and later - pivot_root, you may want to free the memory that is allocated to the - ramdisk. If you have no use for freeing memory from a ramdisk, leave - this disabled. - -config FSCK_MINIX - bool "fsck_minix" - default y - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. It is not a journaling filesystem however and - can experience corruption if it is not properly unmounted or if the - power goes off in the middle of a write. This utility allows you to - check for and attempt to repair any corruption that occurs to a minix - filesystem. - -config MKFS_MINIX - bool "mkfs_minix" - default y - select PLATFORM_LINUX - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. If you wish to be able to create minix - filesystems this utility will do the job for you. - -config FEATURE_MINIX2 - bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" - default y - depends on FSCK_MINIX || MKFS_MINIX - help - If you wish to be able to create version 2 minix filesystems, enable - this. If you enabled 'mkfs_minix' then you almost certainly want to - be using the version 2 filesystem support. - -config MKFS_REISER - bool "mkfs_reiser" - default n - select PLATFORM_LINUX - help - Utility to create ReiserFS filesystems. - Note: this applet needs a lot of testing and polishing. - -config GETOPT - bool "getopt" - default y - help - The getopt utility is used to break up (parse) options in command - lines to make it easy to write complex shell scripts that also check - for legal (and illegal) options. If you want to write horribly - complex shell scripts, or use some horribly complex shell script - written by others, this utility may be for you. Most people will - wisely leave this disabled. - -config FEATURE_GETOPT_LONG - bool "Support option -l" - default y if LONG_OPTS - depends on GETOPT - help - Enable support for long options (option -l). - -config HEXDUMP - bool "hexdump" - default y - help - The hexdump utility is used to display binary data in a readable - way that is comparable to the output from most hex editors. - -config FEATURE_HEXDUMP_REVERSE - bool "Support -R, reverse of 'hexdump -Cv'" - default y - depends on HEXDUMP - help - The hexdump utility is used to display binary data in an ascii - readable way. This option creates binary data from an ascii input. - NB: this option is non-standard. It's unwise to use it in scripts - aimed to be portable. - -config HD - bool "hd" - default y - depends on HEXDUMP - help - hd is an alias to hexdump -C. - -config HWCLOCK - bool "hwclock" - default y - select PLATFORM_LINUX - help - The hwclock utility is used to read and set the hardware clock - on a system. This is primarily used to set the current time on - shutdown in the hardware clock, so the hardware will keep the - correct time when Linux is _not_ running. - -config FEATURE_HWCLOCK_LONG_OPTIONS - bool "Support long options (--hctosys,...)" - default y - depends on HWCLOCK && LONG_OPTS - help - By default, the hwclock utility only uses short options. If you - are overly fond of its long options, such as --hctosys, --utc, etc) - then enable this option. - -config FEATURE_HWCLOCK_ADJTIME_FHS - bool "Use FHS /var/lib/hwclock/adjtime" - default n # util-linux-ng in Fedora 13 still uses /etc/adjtime - depends on HWCLOCK - help - Starting with FHS 2.3, the adjtime state file is supposed to exist - at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish - to use the FHS behavior, answer Y here, otherwise answer N for the - classic /etc/adjtime path. - - pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO - -config IPCRM - bool "ipcrm" - default y - help - The ipcrm utility allows the removal of System V interprocess - communication (IPC) objects and the associated data structures - from the system. - -config IPCS - bool "ipcs" - default y - select PLATFORM_LINUX - help - The ipcs utility is used to provide information on the currently - allocated System V interprocess (IPC) objects in the system. - -config LOSETUP - bool "losetup" - default y - select PLATFORM_LINUX - help - losetup is used to associate or detach a loop device with a regular - file or block device, and to query the status of a loop device. This - version does not currently support enabling data encryption. - -config LSPCI - bool "lspci" - default y - #select PLATFORM_LINUX - help - lspci is a utility for displaying information about PCI buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/pci/devices) only. - -config LSUSB - bool "lsusb" - default y - #select PLATFORM_LINUX - help - lsusb is a utility for displaying information about USB buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/usb/devices) only. - -config MKSWAP - bool "mkswap" - default y - help - The mkswap utility is used to configure a file or disk partition as - Linux swap space. This allows Linux to use the entire file or - partition as if it were additional RAM, which can greatly increase - the capability of low-memory machines. This additional memory is - much slower than real RAM, but can be very helpful at preventing your - applications being killed by the Linux out of memory (OOM) killer. - Once you have created swap space using 'mkswap' you need to enable - the swap space using the 'swapon' utility. - -config FEATURE_MKSWAP_UUID - bool "UUID support" - default y - depends on MKSWAP - help - Generate swap spaces with universally unique identifiers. - -config MORE - bool "more" - default y - help - more is a simple utility which allows you to read text one screen - sized page at a time. If you want to read text that is larger than - the screen, and you are using anything faster than a 300 baud modem, - you will probably find this utility very helpful. If you don't have - any need to reading text files, you can leave this disabled. - -config PIVOT_ROOT - bool "pivot_root" - default y - select PLATFORM_LINUX - help - The pivot_root utility swaps the mount points for the root filesystem - with some other mounted filesystem. This allows you to do all sorts - of wild and crazy things with your Linux system and is far more - powerful than 'chroot'. - - Note: This is for initrd in linux 2.4. Under initramfs (introduced - in linux 2.6) use switch_root instead. - -config RDATE - bool "rdate" - default y - help - The rdate utility allows you to synchronize the date and time of your - system clock with the date and time of a remote networked system using - the RFC868 protocol, which is built into the inetd daemon on most - systems. - -config RDEV - bool "rdev" - default y - help - Print the device node associated with the filesystem mounted at '/'. - -config READPROFILE - bool "readprofile" - default y - #select PLATFORM_LINUX - help - This allows you to parse /proc/profile for basic profiling. - -config RTCWAKE - bool "rtcwake" - default y - select PLATFORM_LINUX - help - Enter a system sleep state until specified wakeup time. - -config SCRIPT - bool "script" - default y - help - The script makes typescript of terminal session. - -config SCRIPTREPLAY - bool "scriptreplay" - default y - help - This program replays a typescript, using timing information - given by script -t. - -config SWITCH_ROOT - bool "switch_root" - default y - select PLATFORM_LINUX - help - The switch_root utility is used from initramfs to select a new - root device. Under initramfs, you have to use this instead of - pivot_root. (Stop reading here if you don't care why.) - - Booting with initramfs extracts a gzipped cpio archive into rootfs - (which is a variant of ramfs/tmpfs). Because rootfs can't be moved - or unmounted*, pivot_root will not work from initramfs. Instead, - switch_root deletes everything out of rootfs (including itself), - does a mount --move that overmounts rootfs with the new root, and - then execs the specified init program. - - * Because the Linux kernel uses rootfs internally as the starting - and ending point for searching through the kernel's doubly linked - list of active mount points. That's why. - -config UMOUNT - bool "umount" - default y - select PLATFORM_LINUX - help - When you want to remove a mounted filesystem from its current mount - point, for example when you are shutting down the system, the - 'umount' utility is the tool to use. If you enabled the 'mount' - utility, you almost certainly also want to enable 'umount'. - -config FEATURE_UMOUNT_ALL - bool "Support option -a" - default y - depends on UMOUNT - help - Support -a option to unmount all currently mounted filesystems. - comment "Common options for mount/umount" depends on MOUNT || UMOUNT diff --git a/util-linux/Kbuild.src b/util-linux/Kbuild.src index dfd50af..6b4fb74 100644 --- a/util-linux/Kbuild.src +++ b/util-linux/Kbuild.src @@ -7,36 +7,3 @@ lib-y:= INSERT -lib-$(CONFIG_ACPID) += acpid.o -lib-$(CONFIG_BLKID) += blkid.o -lib-$(CONFIG_DMESG) += dmesg.o -lib-$(CONFIG_FBSET) += fbset.o -lib-$(CONFIG_FDFLUSH) += freeramdisk.o -lib-$(CONFIG_FDFORMAT) += fdformat.o -lib-$(CONFIG_FDISK) += fdisk.o -lib-$(CONFIG_FINDFS) += findfs.o -lib-$(CONFIG_FLOCK) += flock.o -lib-$(CONFIG_FREERAMDISK) += freeramdisk.o -lib-$(CONFIG_FSCK_MINIX) += fsck_minix.o -lib-$(CONFIG_GETOPT) += getopt.o -lib-$(CONFIG_HEXDUMP) += hexdump.o -lib-$(CONFIG_HWCLOCK) += hwclock.o -lib-$(CONFIG_IPCRM) += ipcrm.o -lib-$(CONFIG_IPCS) += ipcs.o -lib-$(CONFIG_LOSETUP) += losetup.o -lib-$(CONFIG_LSPCI) += lspci.o -lib-$(CONFIG_LSUSB) += lsusb.o -lib-$(CONFIG_MKFS_MINIX) += mkfs_minix.o -lib-$(CONFIG_MKFS_REISER) += mkfs_reiser.o -lib-$(CONFIG_MKSWAP) += mkswap.o -lib-$(CONFIG_MORE) += more.o -lib-$(CONFIG_MOUNT) += mount.o -lib-$(CONFIG_PIVOT_ROOT) += pivot_root.o -lib-$(CONFIG_RDATE) += rdate.o -lib-$(CONFIG_RDEV) += rdev.o -lib-$(CONFIG_READPROFILE) += readprofile.o -lib-$(CONFIG_RTCWAKE) += rtcwake.o -lib-$(CONFIG_SCRIPT) += script.o -lib-$(CONFIG_SCRIPTREPLAY) += scriptreplay.o -lib-$(CONFIG_SWITCH_ROOT) += switch_root.o -lib-$(CONFIG_UMOUNT) += umount.o diff --git a/util-linux/acpid.c b/util-linux/acpid.c index 0f2cb6b..3e68b61 100644 --- a/util-linux/acpid.c +++ b/util-linux/acpid.c @@ -6,6 +6,32 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config ACPID +//config: bool "acpid" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: acpid listens to ACPI events coming either in textual form from +//config: /proc/acpi/event (though it is marked deprecated it is still widely +//config: used and _is_ a standard) or in binary form from specified evdevs +//config: (just use /dev/input/event*). +//config: +//config: It parses the event to retrieve ACTION and a possible PARAMETER. +//config: It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts +//config: (if the resulting path is a directory) or directly as an executable. +//config: +//config: N.B. acpid relies on run-parts so have the latter installed. +//config: +//config:config FEATURE_ACPID_COMPAT +//config: bool "Accept and ignore redundant options" +//config: default y +//config: depends on ACPID +//config: help +//config: Accept and ignore compatibility options -g -m -s -S -v. + +//applet:IF_ACPID(APPLET(acpid, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_ACPID) += acpid.o //usage:#define acpid_trivial_usage //usage: "[-df] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]" diff --git a/util-linux/blkdiscard.c b/util-linux/blkdiscard.c index ace88a1..af0bc94 100644 --- a/util-linux/blkdiscard.c +++ b/util-linux/blkdiscard.c @@ -5,7 +5,6 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ - //config:config BLKDISCARD //config: bool "blkdiscard" //config: default y diff --git a/util-linux/blkid.c b/util-linux/blkid.c index 1bbc803..b6f33b5 100644 --- a/util-linux/blkid.c +++ b/util-linux/blkid.c @@ -6,6 +6,26 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config BLKID +//config: bool "blkid" +//config: default y +//config: select PLATFORM_LINUX +//config: select VOLUMEID +//config: help +//config: Lists labels and UUIDs of all filesystems. +//config: WARNING: +//config: With all submodules selected, it will add ~8k to busybox. +//config: +//config:config FEATURE_BLKID_TYPE +//config: bool "Print filesystem type" +//config: default n +//config: depends on BLKID +//config: help +//config: Show TYPE="filesystem type" + +//applet:IF_BLKID(APPLET(blkid, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_BLKID) += blkid.o //usage:#define blkid_trivial_usage //usage: "[BLOCKDEV]..." diff --git a/util-linux/blockdev.c b/util-linux/blockdev.c index e25e529..bf4d497 100644 --- a/util-linux/blockdev.c +++ b/util-linux/blockdev.c @@ -5,17 +5,16 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ - -//applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP)) - -//kbuild:lib-$(CONFIG_BLOCKDEV) += blockdev.o - //config:config BLOCKDEV //config: bool "blockdev" //config: default y //config: help //config: Performs some ioctls with block devices. +//applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_BLOCKDEV) += blockdev.o + //usage:#define blockdev_trivial_usage //usage: "OPTION BLOCKDEV" //usage:#define blockdev_full_usage "\n\n" diff --git a/util-linux/dmesg.c b/util-linux/dmesg.c index 50e8a0f..b7b2c69 100644 --- a/util-linux/dmesg.c +++ b/util-linux/dmesg.c @@ -8,6 +8,43 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config DMESG +//config: bool "dmesg" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: dmesg is used to examine or control the kernel ring buffer. When the +//config: Linux kernel prints messages to the system log, they are stored in +//config: the kernel ring buffer. You can use dmesg to print the kernel's ring +//config: buffer, clear the kernel ring buffer, change the size of the kernel +//config: ring buffer, and change the priority level at which kernel messages +//config: are also logged to the system console. Enable this option if you +//config: wish to enable the 'dmesg' utility. +//config: +//config:config FEATURE_DMESG_PRETTY +//config: bool "Pretty dmesg output" +//config: default y +//config: depends on DMESG +//config: help +//config: If you wish to scrub the syslog level from the output, say 'Y' here. +//config: The syslog level is a string prefixed to every line with the form +//config: "<#>". +//config: +//config: With this option you will see: +//config: # dmesg +//config: Linux version 2.6.17.4 ..... +//config: BIOS-provided physical RAM map: +//config: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) +//config: +//config: Without this option you will see: +//config: # dmesg +//config: <5>Linux version 2.6.17.4 ..... +//config: <6>BIOS-provided physical RAM map: +//config: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) + +//applet:IF_DMESG(APPLET(dmesg, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_DMESG) += dmesg.o //usage:#define dmesg_trivial_usage //usage: "[-c] [-n LEVEL] [-s SIZE]" diff --git a/util-linux/fatattr.c b/util-linux/fatattr.c index 6dca24a..030978f 100644 --- a/util-linux/fatattr.c +++ b/util-linux/fatattr.c @@ -16,6 +16,7 @@ //config: fatattr lists or changes the file attributes on a fat file system. //applet:IF_FATATTR(APPLET(fatattr, BB_DIR_BIN, BB_SUID_DROP)) + //kbuild:lib-$(CONFIG_FATATTR) += fatattr.o //usage:#define fatattr_trivial_usage diff --git a/util-linux/fbset.c b/util-linux/fbset.c index b75ec19..8a78c1e 100644 --- a/util-linux/fbset.c +++ b/util-linux/fbset.c @@ -11,6 +11,38 @@ * the GPL, and is (c) 1995-1999 by: * Geert Uytterhoeven (Geert.Uytterhoeven@cs.kuleuven.ac.be) */ +//config:config FBSET +//config: bool "fbset" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: fbset is used to show or change the settings of a Linux frame buffer +//config: device. The frame buffer device provides a simple and unique +//config: interface to access a graphics display. Enable this option +//config: if you wish to enable the 'fbset' utility. +//config: +//config:config FEATURE_FBSET_FANCY +//config: bool "Turn on extra fbset options" +//config: default y +//config: depends on FBSET +//config: help +//config: This option enables extended fbset options, allowing one to set the +//config: framebuffer size, color depth, etc. interface to access a graphics +//config: display. Enable this option if you wish to enable extended fbset +//config: options. +//config: +//config:config FEATURE_FBSET_READMODE +//config: bool "Turn on fbset readmode support" +//config: default y +//config: depends on FBSET +//config: help +//config: This option allows fbset to read the video mode database stored by +//config: default as /etc/fb.modes, which can be used to set frame buffer +//config: device to pre-defined video modes. + +//applet:IF_FBSET(APPLET(fbset, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_FBSET) += fbset.o //usage:#define fbset_trivial_usage //usage: "[OPTIONS] [MODE]" diff --git a/util-linux/fdformat.c b/util-linux/fdformat.c index 6ef6445..67c6e15 100644 --- a/util-linux/fdformat.c +++ b/util-linux/fdformat.c @@ -4,6 +4,16 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config FDFORMAT +//config: bool "fdformat" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: fdformat is used to low-level format a floppy disk. + +//applet:IF_FDFORMAT(APPLET(fdformat, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_FDFORMAT) += fdformat.o //usage:#define fdformat_trivial_usage //usage: "[-n] DEVICE" diff --git a/util-linux/fdisk.c b/util-linux/fdisk.c index 32a66d0..af80735 100644 --- a/util-linux/fdisk.c +++ b/util-linux/fdisk.c @@ -6,6 +6,86 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config FDISK +//config: bool "fdisk" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The fdisk utility is used to divide hard disks into one or more +//config: logical disks, which are generally called partitions. This utility +//config: can be used to list and edit the set of partitions or BSD style +//config: 'disk slices' that are defined on a hard drive. +//config: +//config:config FDISK_SUPPORT_LARGE_DISKS +//config: bool "Support over 4GB disks" +//config: default y +//config: depends on FDISK +//config: depends on !LFS # with LFS no special code is needed +//config: help +//config: Enable this option to support large disks > 4GB. +//config: +//config:config FEATURE_FDISK_WRITABLE +//config: bool "Write support" +//config: default y +//config: depends on FDISK +//config: help +//config: Enabling this option allows you to create or change a partition table +//config: and write those changes out to disk. If you leave this option +//config: disabled, you will only be able to view the partition table. +//config: +//config:config FEATURE_AIX_LABEL +//config: bool "Support AIX disklabels" +//config: default n +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to create or change AIX disklabels. +//config: Most people can safely leave this option disabled. +//config: +//config:config FEATURE_SGI_LABEL +//config: bool "Support SGI disklabels" +//config: default n +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to create or change SGI disklabels. +//config: Most people can safely leave this option disabled. +//config: +//config:config FEATURE_SUN_LABEL +//config: bool "Support SUN disklabels" +//config: default n +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to create or change SUN disklabels. +//config: Most people can safely leave this option disabled. +//config: +//config:config FEATURE_OSF_LABEL +//config: bool "Support BSD disklabels" +//config: default n +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to create or change BSD disklabels +//config: and define and edit BSD disk slices. +//config: +//config:config FEATURE_GPT_LABEL +//config: bool "Support GPT disklabels" +//config: default n +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to view GUID Partition Table +//config: disklabels. +//config: +//config:config FEATURE_FDISK_ADVANCED +//config: bool "Support expert mode" +//config: default y +//config: depends on FDISK && FEATURE_FDISK_WRITABLE +//config: help +//config: Enabling this option allows you to do terribly unsafe things like +//config: define arbitrary drive geometry, move the beginning of data in a +//config: partition, and similarly evil things. Unless you have a very good +//config: reason you would be wise to leave this disabled. + +//applet:IF_FDISK(APPLET(fdisk, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_FDISK) += fdisk.o /* Looks like someone forgot to add this to config system */ //usage:#ifndef ENABLE_FEATURE_FDISK_BLKSIZE diff --git a/util-linux/findfs.c b/util-linux/findfs.c index 07734f3..daa46b0 100644 --- a/util-linux/findfs.c +++ b/util-linux/findfs.c @@ -7,6 +7,20 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config FINDFS +//config: bool "findfs" +//config: default y +//config: select PLATFORM_LINUX +//config: select VOLUMEID +//config: help +//config: Prints the name of a filesystem with given label or UUID. +//config: WARNING: +//config: With all submodules selected, it will add ~8k to busybox. + +/* Benefits from suid root: better access to /dev/BLOCKDEVs: */ +//applet:IF_FINDFS(APPLET(findfs, BB_DIR_SBIN, BB_SUID_MAYBE)) + +//kbuild:lib-$(CONFIG_FINDFS) += findfs.o //usage:#define findfs_trivial_usage //usage: "LABEL=label or UUID=uuid" diff --git a/util-linux/flock.c b/util-linux/flock.c index 1f7ade7..f34c0ad 100644 --- a/util-linux/flock.c +++ b/util-linux/flock.c @@ -3,6 +3,15 @@ * * This is free software, licensed under the GNU General Public License v2. */ +//config:config FLOCK +//config: bool "flock" +//config: default y +//config: help +//config: Manage locks from shell scripts + +//applet:IF_FLOCK(APPLET(flock, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_FLOCK) += flock.o //usage:#define flock_trivial_usage //usage: "[-sxun] FD|{FILE [-c] PROG ARGS}" diff --git a/util-linux/freeramdisk.c b/util-linux/freeramdisk.c index a89ae1a..8bc2c44 100644 --- a/util-linux/freeramdisk.c +++ b/util-linux/freeramdisk.c @@ -8,6 +8,36 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config FDFLUSH +//config: bool "fdflush" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: fdflush is only needed when changing media on slightly-broken +//config: removable media drives. It is used to make Linux believe that a +//config: hardware disk-change switch has been actuated, which causes Linux to +//config: forget anything it has cached from the previous media. If you have +//config: such a slightly-broken drive, you will need to run fdflush every time +//config: you change a disk. Most people have working hardware and can safely +//config: leave this disabled. +//config: +//config:config FREERAMDISK +//config: bool "freeramdisk" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: Linux allows you to create ramdisks. This utility allows you to +//config: delete them and completely free all memory that was used for the +//config: ramdisk. For example, if you boot Linux into a ramdisk and later +//config: pivot_root, you may want to free the memory that is allocated to the +//config: ramdisk. If you have no use for freeing memory from a ramdisk, leave +//config: this disabled. + +//applet:IF_FDFLUSH(APPLET_ODDNAME(fdflush, freeramdisk, BB_DIR_BIN, BB_SUID_DROP, fdflush)) +//applet:IF_FREERAMDISK(APPLET(freeramdisk, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_FDFLUSH) += freeramdisk.o +//kbuild:lib-$(CONFIG_FREERAMDISK) += freeramdisk.o //usage:#define freeramdisk_trivial_usage //usage: "DEVICE" diff --git a/util-linux/fsck_minix.c b/util-linux/fsck_minix.c index d2f3524..0eaac17 100644 --- a/util-linux/fsck_minix.c +++ b/util-linux/fsck_minix.c @@ -85,6 +85,20 @@ * The device may be a block device or a image of one, but this isn't * enforced (but it's not much fun on a character device :-). */ +//config:config FSCK_MINIX +//config: bool "fsck_minix" +//config: default y +//config: help +//config: The minix filesystem is a nice, small, compact, read-write filesystem +//config: with little overhead. It is not a journaling filesystem however and +//config: can experience corruption if it is not properly unmounted or if the +//config: power goes off in the middle of a write. This utility allows you to +//config: check for and attempt to repair any corruption that occurs to a minix +//config: filesystem. + +//applet:IF_FSCK_MINIX(APPLET_ODDNAME(fsck.minix, fsck_minix, BB_DIR_SBIN, BB_SUID_DROP, fsck_minix)) + +//kbuild:lib-$(CONFIG_FSCK_MINIX) += fsck_minix.o //usage:#define fsck_minix_trivial_usage //usage: "[-larvsmf] BLOCKDEV" diff --git a/util-linux/getopt.c b/util-linux/getopt.c index 18d4909..83cc1ef 100644 --- a/util-linux/getopt.c +++ b/util-linux/getopt.c @@ -28,8 +28,28 @@ * Removed --version/-V and --help/-h * Removed parse_error(), using bb_error_msg() from Busybox instead * Replaced our_malloc with xmalloc and our_realloc with xrealloc - * */ +//config:config GETOPT +//config: bool "getopt" +//config: default y +//config: help +//config: The getopt utility is used to break up (parse) options in command +//config: lines to make it easy to write complex shell scripts that also check +//config: for legal (and illegal) options. If you want to write horribly +//config: complex shell scripts, or use some horribly complex shell script +//config: written by others, this utility may be for you. Most people will +//config: wisely leave this disabled. +//config: +//config:config FEATURE_GETOPT_LONG +//config: bool "Support option -l" +//config: default y if LONG_OPTS +//config: depends on GETOPT +//config: help +//config: Enable support for long options (option -l). + +//applet:IF_GETOPT(APPLET(getopt, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_GETOPT) += getopt.o //usage:#define getopt_trivial_usage //usage: "[OPTIONS] [--] OPTSTRING PARAMS" diff --git a/util-linux/hexdump.c b/util-linux/hexdump.c index ac7e24f..5e1ef69 100644 --- a/util-linux/hexdump.c +++ b/util-linux/hexdump.c @@ -8,6 +8,35 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config HEXDUMP +//config: bool "hexdump" +//config: default y +//config: help +//config: The hexdump utility is used to display binary data in a readable +//config: way that is comparable to the output from most hex editors. +//config: +//config:config FEATURE_HEXDUMP_REVERSE +//config: bool "Support -R, reverse of 'hexdump -Cv'" +//config: default y +//config: depends on HEXDUMP +//config: help +//config: The hexdump utility is used to display binary data in an ascii +//config: readable way. This option creates binary data from an ascii input. +//config: NB: this option is non-standard. It's unwise to use it in scripts +//config: aimed to be portable. +//config: +//config:config HD +//config: bool "hd" +//config: default y +//config: depends on HEXDUMP +//config: help +//config: hd is an alias to hexdump -C. + +//applet:IF_HEXDUMP(APPLET_NOEXEC(hexdump, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hexdump)) +//applet:IF_HD(APPLET_NOEXEC(hd, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hd)) + +//kbuild:lib-$(CONFIG_HEXDUMP) += hexdump.o +//kbuild:lib-$(CONFIG_HD) += hexdump.o //usage:#define hexdump_trivial_usage //usage: "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..." diff --git a/util-linux/hwclock.c b/util-linux/hwclock.c index 6c99977..084a7f1 100644 --- a/util-linux/hwclock.c +++ b/util-linux/hwclock.c @@ -5,7 +5,41 @@ * Copyright (C) 2002 Robert Griebl <griebl@gmx.de> * * Licensed under GPLv2 or later, see file LICENSE in this source tree. -*/ + */ +//config:config HWCLOCK +//config: bool "hwclock" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The hwclock utility is used to read and set the hardware clock +//config: on a system. This is primarily used to set the current time on +//config: shutdown in the hardware clock, so the hardware will keep the +//config: correct time when Linux is _not_ running. +//config: +//config:config FEATURE_HWCLOCK_LONG_OPTIONS +//config: bool "Support long options (--hctosys,...)" +//config: default y +//config: depends on HWCLOCK && LONG_OPTS +//config: help +//config: By default, the hwclock utility only uses short options. If you +//config: are overly fond of its long options, such as --hctosys, --utc, etc) +//config: then enable this option. +//config: +//config:config FEATURE_HWCLOCK_ADJTIME_FHS +//config: bool "Use FHS /var/lib/hwclock/adjtime" +//config: default n # util-linux-ng in Fedora 13 still uses /etc/adjtime +//config: depends on HWCLOCK +//config: help +//config: Starting with FHS 2.3, the adjtime state file is supposed to exist +//config: at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish +//config: to use the FHS behavior, answer Y here, otherwise answer N for the +//config: classic /etc/adjtime path. +//config: +//config: pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO + +//applet:IF_HWCLOCK(APPLET(hwclock, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_HWCLOCK) += hwclock.o #include "libbb.h" /* After libbb.h, since it needs sys/types.h on some systems */ diff --git a/util-linux/ipcrm.c b/util-linux/ipcrm.c index 38d81af..76ea3ca 100644 --- a/util-linux/ipcrm.c +++ b/util-linux/ipcrm.c @@ -7,6 +7,17 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config IPCRM +//config: bool "ipcrm" +//config: default y +//config: help +//config: The ipcrm utility allows the removal of System V interprocess +//config: communication (IPC) objects and the associated data structures +//config: from the system. + +//applet:IF_IPCRM(APPLET(ipcrm, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_IPCRM) += ipcrm.o //usage:#define ipcrm_trivial_usage //usage: "[-MQS key] [-mqs id]" diff --git a/util-linux/ipcs.c b/util-linux/ipcs.c index 67a25a8..88ae922 100644 --- a/util-linux/ipcs.c +++ b/util-linux/ipcs.c @@ -7,6 +7,17 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config IPCS +//config: bool "ipcs" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The ipcs utility is used to provide information on the currently +//config: allocated System V interprocess (IPC) objects in the system. + +//applet:IF_IPCS(APPLET(ipcs, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_IPCS) += ipcs.o //usage:#define ipcs_trivial_usage //usage: "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" diff --git a/util-linux/losetup.c b/util-linux/losetup.c index d450b5a..4424d9c 100644 --- a/util-linux/losetup.c +++ b/util-linux/losetup.c @@ -6,6 +6,18 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config LOSETUP +//config: bool "losetup" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: losetup is used to associate or detach a loop device with a regular +//config: file or block device, and to query the status of a loop device. This +//config: version does not currently support enabling data encryption. + +//kbuild:lib-$(CONFIG_LOSETUP) += losetup.o + +//applet:IF_LOSETUP(APPLET(losetup, BB_DIR_SBIN, BB_SUID_DROP)) //usage:#define losetup_trivial_usage //usage: "[-r] [-o OFS] {-f|LOOPDEV} FILE - associate loop devices\n" diff --git a/util-linux/lspci.c b/util-linux/lspci.c index 514678a..8b38a23 100644 --- a/util-linux/lspci.c +++ b/util-linux/lspci.c @@ -6,6 +6,19 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config LSPCI +//config: bool "lspci" +//config: default y +//config: #select PLATFORM_LINUX +//config: help +//config: lspci is a utility for displaying information about PCI buses in the +//config: system and devices connected to them. +//config: +//config: This version uses sysfs (/sys/bus/pci/devices) only. + +//applet:IF_LSPCI(APPLET(lspci, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_LSPCI) += lspci.o //usage:#define lspci_trivial_usage //usage: "[-mk]" diff --git a/util-linux/lsusb.c b/util-linux/lsusb.c index 540f21e..7d36d6f 100644 --- a/util-linux/lsusb.c +++ b/util-linux/lsusb.c @@ -6,6 +6,19 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config LSUSB +//config: bool "lsusb" +//config: default y +//config: #select PLATFORM_LINUX +//config: help +//config: lsusb is a utility for displaying information about USB buses in the +//config: system and devices connected to them. +//config: +//config: This version uses sysfs (/sys/bus/usb/devices) only. + +//applet:IF_LSUSB(APPLET(lsusb, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_LSUSB) += lsusb.o //usage:#define lsusb_trivial_usage NOUSAGE_STR //usage:#define lsusb_full_usage "" diff --git a/util-linux/mkfs_minix.c b/util-linux/mkfs_minix.c index aaabf84..912246b 100644 --- a/util-linux/mkfs_minix.c +++ b/util-linux/mkfs_minix.c @@ -62,6 +62,27 @@ * Modified for BusyBox by Erik Andersen <andersen@debian.org> -- * removed getopt based parser and added a hand rolled one. */ +//config:config MKFS_MINIX +//config: bool "mkfs_minix" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The minix filesystem is a nice, small, compact, read-write filesystem +//config: with little overhead. If you wish to be able to create minix +//config: filesystems this utility will do the job for you. +//config: +//config:config FEATURE_MINIX2 +//config: bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" +//config: default y +//config: depends on FSCK_MINIX || MKFS_MINIX +//config: help +//config: If you wish to be able to create version 2 minix filesystems, enable +//config: this. If you enabled 'mkfs_minix' then you almost certainly want to +//config: be using the version 2 filesystem support. + +//applet:IF_MKFS_MINIX(APPLET_ODDNAME(mkfs.minix, mkfs_minix, BB_DIR_SBIN, BB_SUID_DROP, mkfs_minix)) + +//kbuild:lib-$(CONFIG_MKFS_MINIX) += mkfs_minix.o //usage:#define mkfs_minix_trivial_usage //usage: "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]" diff --git a/util-linux/mkfs_reiser.c b/util-linux/mkfs_reiser.c index 0a31ee4..d01119f 100644 --- a/util-linux/mkfs_reiser.c +++ b/util-linux/mkfs_reiser.c @@ -6,6 +6,17 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config MKFS_REISER +//config: bool "mkfs_reiser" +//config: default n +//config: select PLATFORM_LINUX +//config: help +//config: Utility to create ReiserFS filesystems. +//config: Note: this applet needs a lot of testing and polishing. + +//applet:IF_MKFS_REISER(APPLET_ODDNAME(mkfs.reiser, mkfs_reiser, BB_DIR_SBIN, BB_SUID_DROP, mkfs_reiser)) + +//kbuild:lib-$(CONFIG_MKFS_REISER) += mkfs_reiser.o //usage:#define mkfs_reiser_trivial_usage //usage: "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]" diff --git a/util-linux/mkswap.c b/util-linux/mkswap.c index dcb53f0..954a194 100644 --- a/util-linux/mkswap.c +++ b/util-linux/mkswap.c @@ -5,6 +5,29 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config MKSWAP +//config: bool "mkswap" +//config: default y +//config: help +//config: The mkswap utility is used to configure a file or disk partition as +//config: Linux swap space. This allows Linux to use the entire file or +//config: partition as if it were additional RAM, which can greatly increase +//config: the capability of low-memory machines. This additional memory is +//config: much slower than real RAM, but can be very helpful at preventing your +//config: applications being killed by the Linux out of memory (OOM) killer. +//config: Once you have created swap space using 'mkswap' you need to enable +//config: the swap space using the 'swapon' utility. +//config: +//config:config FEATURE_MKSWAP_UUID +//config: bool "UUID support" +//config: default y +//config: depends on MKSWAP +//config: help +//config: Generate swap spaces with universally unique identifiers. + +//applet:IF_MKSWAP(APPLET(mkswap, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_MKSWAP) += mkswap.o //usage:#define mkswap_trivial_usage //usage: "[-L LBL] BLOCKDEV [KBYTES]" diff --git a/util-linux/more.c b/util-linux/more.c index 07836e2..934b30f 100644 --- a/util-linux/more.c +++ b/util-linux/more.c @@ -13,6 +13,19 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config MORE +//config: bool "more" +//config: default y +//config: help +//config: more is a simple utility which allows you to read text one screen +//config: sized page at a time. If you want to read text that is larger than +//config: the screen, and you are using anything faster than a 300 baud modem, +//config: you will probably find this utility very helpful. If you don't have +//config: any need to reading text files, you can leave this disabled. + +//applet:IF_MORE(APPLET(more, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_MORE) += more.o //usage:#define more_trivial_usage //usage: "[FILE]..." diff --git a/util-linux/mount.c b/util-linux/mount.c index eb8b7ba..42962b8 100644 --- a/util-linux/mount.c +++ b/util-linux/mount.c @@ -112,6 +112,14 @@ //config: help //config: Support mount -T (specifying an alternate fstab) +/* On full-blown systems, requires suid for user mounts. + * But it's not unthinkable to have it available in non-suid flavor on some systems, + * for viewing mount table. + * Therefore we use BB_SUID_MAYBE instead of BB_SUID_REQUIRE: */ +//applet:IF_MOUNT(APPLET(mount, BB_DIR_BIN, IF_DESKTOP(BB_SUID_MAYBE) IF_NOT_DESKTOP(BB_SUID_DROP))) + +//kbuild:lib-$(CONFIG_MOUNT) += mount.o + //usage:#define mount_trivial_usage //usage: "[OPTIONS] [-o OPT] DEVICE NODE" //usage:#define mount_full_usage "\n\n" diff --git a/util-linux/pivot_root.c b/util-linux/pivot_root.c index 83f01fa..9bdae50 100644 --- a/util-linux/pivot_root.c +++ b/util-linux/pivot_root.c @@ -8,6 +8,22 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config PIVOT_ROOT +//config: bool "pivot_root" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The pivot_root utility swaps the mount points for the root filesystem +//config: with some other mounted filesystem. This allows you to do all sorts +//config: of wild and crazy things with your Linux system and is far more +//config: powerful than 'chroot'. +//config: +//config: Note: This is for initrd in linux 2.4. Under initramfs (introduced +//config: in linux 2.6) use switch_root instead. + +//applet:IF_PIVOT_ROOT(APPLET(pivot_root, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_PIVOT_ROOT) += pivot_root.o //usage:#define pivot_root_trivial_usage //usage: "NEW_ROOT PUT_OLD" diff --git a/util-linux/rdate.c b/util-linux/rdate.c index 8075ef6..8dd784d 100644 --- a/util-linux/rdate.c +++ b/util-linux/rdate.c @@ -6,7 +6,19 @@ * by Sterling Huxley <sterling@europa.com> * * Licensed under GPLv2 or later, see file LICENSE in this source tree. -*/ + */ +//config:config RDATE +//config: bool "rdate" +//config: default y +//config: help +//config: The rdate utility allows you to synchronize the date and time of your +//config: system clock with the date and time of a remote networked system using +//config: the RFC868 protocol, which is built into the inetd daemon on most +//config: systems. + +//applet:IF_RDATE(APPLET(rdate, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_RDATE) += rdate.o //usage:#define rdate_trivial_usage //usage: "[-sp] HOST" diff --git a/util-linux/rdev.c b/util-linux/rdev.c index 4652817..0e1578e 100644 --- a/util-linux/rdev.c +++ b/util-linux/rdev.c @@ -8,6 +8,15 @@ * Licensed under GPLv2, see file LICENSE in this source tree. * */ +//config:config RDEV +//config: bool "rdev" +//config: default y +//config: help +//config: Print the device node associated with the filesystem mounted at '/'. + +//applet:IF_RDEV(APPLET(rdev, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_RDEV) += rdev.o //usage:#define rdev_trivial_usage //usage: "" diff --git a/util-linux/readprofile.c b/util-linux/readprofile.c index 345b676..d523038 100644 --- a/util-linux/readprofile.c +++ b/util-linux/readprofile.c @@ -31,6 +31,16 @@ * Taken from util-linux and adapted for busybox by * Paul Mundt <lethal@linux-sh.org>. */ +//config:config READPROFILE +//config: bool "readprofile" +//config: default y +//config: #select PLATFORM_LINUX +//config: help +//config: This allows you to parse /proc/profile for basic profiling. + +//applet:IF_READPROFILE(APPLET(readprofile, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_READPROFILE) += readprofile.o //usage:#define readprofile_trivial_usage //usage: "[OPTIONS]" diff --git a/util-linux/rev.c b/util-linux/rev.c index 3c1b22f..c225053 100644 --- a/util-linux/rev.c +++ b/util-linux/rev.c @@ -5,17 +5,16 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ - -//applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP)) - -//kbuild:lib-$(CONFIG_REV) += rev.o - //config:config REV //config: bool "rev" //config: default y //config: help //config: Reverse lines of a file or files. +//applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_REV) += rev.o + //usage:#define rev_trivial_usage //usage: "[FILE]..." //usage:#define rev_full_usage "\n\n" diff --git a/util-linux/rtcwake.c b/util-linux/rtcwake.c index 8aee0cf..54fc705 100644 --- a/util-linux/rtcwake.c +++ b/util-linux/rtcwake.c @@ -22,6 +22,16 @@ * RTC uses a local timezone instead (maybe you dual-boot MS-Windows). * That flag should not be needed on systems with adjtime support. */ +//config:config RTCWAKE +//config: bool "rtcwake" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: Enter a system sleep state until specified wakeup time. + +//applet:IF_RTCWAKE(APPLET(rtcwake, BB_DIR_USR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_RTCWAKE) += rtcwake.o //usage:#define rtcwake_trivial_usage //usage: "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]" diff --git a/util-linux/script.c b/util-linux/script.c index 86475c1..c5063e8 100644 --- a/util-linux/script.c +++ b/util-linux/script.c @@ -10,6 +10,15 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ +//config:config SCRIPT +//config: bool "script" +//config: default y +//config: help +//config: The script makes typescript of terminal session. + +//applet:IF_SCRIPT(APPLET(script, BB_DIR_USR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_SCRIPT) += script.o //usage:#define script_trivial_usage //usage: "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]" diff --git a/util-linux/scriptreplay.c b/util-linux/scriptreplay.c index 382f56d..8a0c748 100644 --- a/util-linux/scriptreplay.c +++ b/util-linux/scriptreplay.c @@ -7,6 +7,16 @@ * Licensed under GPLv2 or later, see file LICENSE in this source tree. * */ +//config:config SCRIPTREPLAY +//config: bool "scriptreplay" +//config: default y +//config: help +//config: This program replays a typescript, using timing information +//config: given by script -t. + +//applet:IF_SCRIPTREPLAY(APPLET(scriptreplay, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_SCRIPTREPLAY) += scriptreplay.o //usage:#define scriptreplay_trivial_usage //usage: "timingfile [typescript [divisor]]" diff --git a/util-linux/swaponoff.c b/util-linux/swaponoff.c index 0a2d23f..b8f4e94 100644 --- a/util-linux/swaponoff.c +++ b/util-linux/swaponoff.c @@ -6,7 +6,6 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ - //config:config SWAPON //config: bool "swapon" //config: default y diff --git a/util-linux/switch_root.c b/util-linux/switch_root.c index 7960b67..6034485 100644 --- a/util-linux/switch_root.c +++ b/util-linux/switch_root.c @@ -5,6 +5,29 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config SWITCH_ROOT +//config: bool "switch_root" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: The switch_root utility is used from initramfs to select a new +//config: root device. Under initramfs, you have to use this instead of +//config: pivot_root. (Stop reading here if you don't care why.) +//config: +//config: Booting with initramfs extracts a gzipped cpio archive into rootfs +//config: (which is a variant of ramfs/tmpfs). Because rootfs can't be moved +//config: or unmounted*, pivot_root will not work from initramfs. Instead, +//config: switch_root deletes everything out of rootfs (including itself), +//config: does a mount --move that overmounts rootfs with the new root, and +//config: then execs the specified init program. +//config: +//config: * Because the Linux kernel uses rootfs internally as the starting +//config: and ending point for searching through the kernel's doubly linked +//config: list of active mount points. That's why. + +//applet:IF_SWITCH_ROOT(APPLET(switch_root, BB_DIR_SBIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_SWITCH_ROOT) += switch_root.o //usage:#define switch_root_trivial_usage //usage: "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]" diff --git a/util-linux/uevent.c b/util-linux/uevent.c index b98fe61..c22216a 100644 --- a/util-linux/uevent.c +++ b/util-linux/uevent.c @@ -3,7 +3,6 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ - //config:config UEVENT //config: bool "uevent" //config: default y diff --git a/util-linux/umount.c b/util-linux/umount.c index 91da696..78eef57 100644 --- a/util-linux/umount.c +++ b/util-linux/umount.c @@ -7,6 +7,26 @@ * * Licensed under GPLv2, see file LICENSE in this source tree. */ +//config:config UMOUNT +//config: bool "umount" +//config: default y +//config: select PLATFORM_LINUX +//config: help +//config: When you want to remove a mounted filesystem from its current mount +//config: point, for example when you are shutting down the system, the +//config: 'umount' utility is the tool to use. If you enabled the 'mount' +//config: utility, you almost certainly also want to enable 'umount'. +//config: +//config:config FEATURE_UMOUNT_ALL +//config: bool "Support option -a" +//config: default y +//config: depends on UMOUNT +//config: help +//config: Support -a option to unmount all currently mounted filesystems. + +//applet:IF_UMOUNT(APPLET(umount, BB_DIR_BIN, BB_SUID_DROP)) + +//kbuild:lib-$(CONFIG_UMOUNT) += umount.o //usage:#define umount_trivial_usage //usage: "[OPTIONS] FILESYSTEM|DIRECTORY" diff --git a/util-linux/unshare.c b/util-linux/unshare.c index dcc5955..bbabeef 100644 --- a/util-linux/unshare.c +++ b/util-linux/unshare.c @@ -6,7 +6,6 @@ * * Licensed under GPLv2 or later, see file LICENSE in this source tree. */ - //config:config UNSHARE //config: bool "unshare" //config: default y |