diff options
Diffstat (limited to 'networking/Config.src')
| -rw-r--r-- | networking/Config.src | 1020 |
1 files changed, 1020 insertions, 0 deletions
diff --git a/networking/Config.src b/networking/Config.src new file mode 100644 index 0000000..ce7166f --- /dev/null +++ b/networking/Config.src @@ -0,0 +1,1020 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Networking Utilities" + +config FEATURE_IPV6 + bool "Enable IPv6 support" + default n + help + Enable IPv6 support in busybox. + This adds IPv6 support in the networking applets. + +config FEATURE_UNIX_LOCAL + bool "Enable Unix domain socket support (usually not needed)" + default n + help + Enable Unix domain socket support in all busybox networking + applets. Address of the form local:/path/to/unix/socket + will be recognized. + + This extension is almost never used in real world usage. + You most likely want to say N. + +config FEATURE_PREFER_IPV4_ADDRESS + bool "Prefer IPv4 addresses from DNS queries" + default y + depends on FEATURE_IPV6 + help + Use IPv4 address of network host if it has one. + + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. + +config VERBOSE_RESOLUTION_ERRORS + bool "Verbose resolution errors" + default n + help + Enable if you are not satisfied with simplistic + "can't resolve 'hostname.com'" and want to know more. + This may increase size of your executable a bit. + +config ARP + bool "arp" + default n + help + Manipulate the system ARP cache. + +config ARPING + bool "arping" + default n + help + Ping hosts by ARP packets. + +config BRCTL + bool "brctl" + default n + help + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. + +config FEATURE_BRCTL_FANCY + bool "Fancy options" + default n + depends on BRCTL + help + Add support for extended option like: + setageing, setfd, sethello, setmaxage, + setpathcost, setportprio, setbridgeprio, + stp + This adds about 600 bytes. + +config FEATURE_BRCTL_SHOW + bool "Support show, showmac and showstp" + default n + depends on BRCTL && FEATURE_BRCTL_FANCY + help + Add support for option which prints the current config: + showmacs, showstp, show + +config DNSD + bool "dnsd" + default n + help + Small and static DNS server daemon. + +config ETHER_WAKE + bool "ether-wake" + default n + help + Send a magic packet to wake up sleeping machines. + +config FAKEIDENTD + bool "fakeidentd" + default n + select FEATURE_SYSLOG + help + fakeidentd listens on the ident port and returns a predefined + fake value on any query. + +config FTPD + bool "ftpd" + default n + help + simple FTP daemon. You have to run it via inetd. + +config FEATURE_FTP_WRITE + bool "Enable upload commands" + default y + depends on FTPD + help + Enable all kinds of FTP upload commands (-w option) + +config FEATURE_FTPD_ACCEPT_BROKEN_LIST + bool "Enable workaround for RFC-violating clients" + default y + depends on FTPD + help + Some ftp clients (among them KDE's Konqueror) issue illegal + "LIST -l" requests. This option works around such problems. + It might prevent you from listing files starting with "-" and + it increases the code size by ~40 bytes. + Most other ftp servers seem to behave similar to this. + +config FTPGET + bool "ftpget" + default n + help + Retrieve a remote file via FTP. + +config FTPPUT + bool "ftpput" + default n + help + Store a remote file via FTP. + +config FEATURE_FTPGETPUT_LONG_OPTIONS + bool "Enable long options in ftpget/ftpput" + default n + depends on LONG_OPTS && (FTPGET || FTPPUT) + help + Support long options for the ftpget/ftpput applet. + +config HOSTNAME + bool "hostname" + default n + help + Show or set the system's host name. + +config HTTPD + bool "httpd" + default n + help + Serve web pages via an HTTP server. + +config FEATURE_HTTPD_RANGES + bool "Support 'Ranges:' header" + default n + depends on HTTPD + help + Makes httpd emit "Accept-Ranges: bytes" header and understand + "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted + downloads, seeking in multimedia players etc. + +config FEATURE_HTTPD_USE_SENDFILE + bool "Use sendfile system call" + default n + depends on HTTPD + help + When enabled, httpd will use the kernel sendfile() function + instead of read/write loop. + +config FEATURE_HTTPD_SETUID + bool "Enable -u <user> option" + default n + depends on HTTPD + help + This option allows the server to run as a specific user + rather than defaulting to the user that starts the server. + Use of this option requires special privileges to change to a + different user. + +config FEATURE_HTTPD_BASIC_AUTH + bool "Enable Basic http Authentication" + default y + depends on HTTPD + help + Utilizes password settings from /etc/httpd.conf for basic + authentication on a per url basis. + +config FEATURE_HTTPD_AUTH_MD5 + bool "Support MD5 crypted passwords for http Authentication" + default n + depends on FEATURE_HTTPD_BASIC_AUTH + help + Enables basic per URL authentication from /etc/httpd.conf + using md5 passwords. + +config FEATURE_HTTPD_CGI + bool "Support Common Gateway Interface (CGI)" + default y + depends on HTTPD + help + This option allows scripts and executables to be invoked + when specific URLs are requested. + +config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR + bool "Support for running scripts through an interpreter" + default n + depends on FEATURE_HTTPD_CGI + help + This option enables support for running scripts through an + interpreter. Turn this on if you want PHP scripts to work + properly. You need to supply an additional line in your httpd + config file: + *.php:/path/to/your/php + +config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV + bool "Set REMOTE_PORT environment variable for CGI" + default n + depends on FEATURE_HTTPD_CGI + help + Use of this option can assist scripts in generating + references that contain a unique port number. + +config FEATURE_HTTPD_ENCODE_URL_STR + bool "Enable -e option (useful for CGIs written as shell scripts)" + default y + depends on HTTPD + help + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "<Hello World>" produces + "<Hello World>". + +config FEATURE_HTTPD_ERROR_PAGES + bool "Support for custom error pages" + default n + depends on HTTPD + help + This option allows you to define custom error pages in + the configuration file instead of the default HTTP status + error pages. For instance, if you add the line: + E404:/path/e404.html + in the config file, the server will respond the specified + '/path/e404.html' file instead of the terse '404 NOT FOUND' + message. + +config FEATURE_HTTPD_PROXY + bool "Support for reverse proxy" + default n + depends on HTTPD + help + This option allows you to define URLs that will be forwarded + to another HTTP server. To setup add the following line to the + configuration file + P:/url/:http://hostname[:port]/new/path/ + Then a request to /url/myfile will be forwarded to + http://hostname[:port]/new/path/myfile. + +config IFCONFIG + bool "ifconfig" + default n + help + Ifconfig is used to configure the kernel-resident network interfaces. + +config FEATURE_IFCONFIG_STATUS + bool "Enable status reporting output (+7k)" + default y + depends on IFCONFIG + help + If ifconfig is called with no arguments it will display the status + of the currently active interfaces. + +config FEATURE_IFCONFIG_SLIP + bool "Enable slip-specific options \"keepalive\" and \"outfill\"" + default n + depends on IFCONFIG + help + Allow "keepalive" and "outfill" support for SLIP. If you're not + planning on using serial lines, leave this unchecked. + +config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ + bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" + default n + depends on IFCONFIG + help + Allow the start address for shared memory, start address for I/O, + and/or the interrupt line used by the specified device. + +config FEATURE_IFCONFIG_HW + bool "Enable option \"hw\" (ether only)" + default y + depends on IFCONFIG + help + Set the hardware address of this interface, if the device driver + supports this operation. Currently, we only support the 'ether' + class. + +config FEATURE_IFCONFIG_BROADCAST_PLUS + bool "Set the broadcast automatically" + default n + depends on IFCONFIG + help + Setting this will make ifconfig attempt to find the broadcast + automatically if the value '+' is used. + +config IFENSLAVE + bool "ifenslave" + default n + help + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). + +config IFPLUGD + bool "ifplugd" + default n + help + Network interface plug detection daemon. + +config IFUPDOWN + bool "ifupdown" + default n + help + Activate or deactivate the specified interfaces. This applet makes + use of either "ifconfig" and "route" or the "ip" command to actually + configure network interfaces. Therefore, you will probably also want + to enable either IFCONFIG and ROUTE, or enable + FEATURE_IFUPDOWN_IP and the various IP options. Of + course you could use non-busybox versions of these programs, so + against my better judgement (since this will surely result in plenty + of support questions on the mailing list), I do not force you to + enable these additional options. It is up to you to supply either + "ifconfig", "route" and "run-parts" or the "ip" command, either + via busybox or via standalone utilities. + +config IFUPDOWN_IFSTATE_PATH + string "Absolute path to ifstate file" + default "/var/run/ifstate" + depends on IFUPDOWN + help + ifupdown keeps state information in a file called ifstate. + Typically it is located in /var/run/ifstate, however + some distributions tend to put it in other places + (debian, for example, uses /etc/network/run/ifstate). + This config option defines location of ifstate. + +config FEATURE_IFUPDOWN_IP + bool "Use ip applet" + default n + depends on IFUPDOWN + help + Use the iproute "ip" command to implement "ifup" and "ifdown", rather + than the default of using the older 'ifconfig' and 'route' utilities. + +config FEATURE_IFUPDOWN_IP_BUILTIN + bool "Use busybox ip applet" + default y + depends on FEATURE_IFUPDOWN_IP + select IP + select FEATURE_IP_ADDRESS + select FEATURE_IP_LINK + select FEATURE_IP_ROUTE + help + Use the busybox iproute "ip" applet to implement "ifupdown". + + If left disabled, you must install the full-blown iproute2 + utility or the "ifup" and "ifdown" applets will not work. + +config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN + bool "Use busybox ifconfig and route applets" + default y + depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP + select IFCONFIG + select ROUTE + help + Use the busybox iproute "ifconfig" and "route" applets to + implement the "ifup" and "ifdown" utilities. + + If left disabled, you must install the full-blown ifconfig + and route utilities, or the "ifup" and "ifdown" applets will not + work. + +config FEATURE_IFUPDOWN_IPV4 + bool "Support for IPv4" + default y + depends on IFUPDOWN + help + If you want ifup/ifdown to talk IPv4, leave this on. + +config FEATURE_IFUPDOWN_IPV6 + bool "Support for IPv6" + default n + depends on IFUPDOWN && FEATURE_IPV6 + help + If you need support for IPv6, turn this option on. + +### UNUSED +###config FEATURE_IFUPDOWN_IPX +### bool "Support for IPX" +### default n +### depends on IFUPDOWN +### help +### If this option is selected you can use busybox to work with IPX +### networks. + +config FEATURE_IFUPDOWN_MAPPING + bool "Enable mapping support" + default n + depends on IFUPDOWN + help + This enables support for the "mapping" stanza, unless you have + a weird network setup you don't need it. + +config FEATURE_IFUPDOWN_EXTERNAL_DHCP + bool "Support for external dhcp clients" + default n + depends on IFUPDOWN + help + This enables support for the external dhcp clients. Clients are + tried in the following order: dhcpcd, dhclient, pump and udhcpc. + Otherwise, if udhcpc applet is enabled, it is used. + Otherwise, ifup/ifdown will have no support for DHCP. + +config INETD + bool "inetd" + default n + select FEATURE_SYSLOG + help + Internet superserver daemon + +config FEATURE_INETD_SUPPORT_BUILTIN_ECHO + bool "Support echo service" + default y + depends on INETD + help + Echo received data internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD + bool "Support discard service" + default y + depends on INETD + help + Internet /dev/null internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_TIME + bool "Support time service" + default y + depends on INETD + help + Return 32 bit time since 1900 internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME + bool "Support daytime service" + default y + depends on INETD + help + Return human-readable time internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN + bool "Support chargen service" + default y + depends on INETD + help + Familiar character generator internal inetd service + +config FEATURE_INETD_RPC + bool "Support RPC services" + default n + depends on INETD + select FEATURE_HAVE_RPC + help + Support Sun-RPC based services + +config IP + bool "ip" + default n + help + The "ip" applet is a TCP/IP interface configuration and routing + utility. You generally don't need "ip" to use busybox with + TCP/IP. + +config FEATURE_IP_ADDRESS + bool "ip address" + default y + depends on IP + help + Address manipulation support for the "ip" applet. + +config FEATURE_IP_LINK + bool "ip link" + default y + depends on IP + help + Configure network devices with "ip". + +config FEATURE_IP_ROUTE + bool "ip route" + default y + depends on IP + help + Add support for routing table management to "ip". + +config FEATURE_IP_TUNNEL + bool "ip tunnel" + default n + depends on IP + help + Add support for tunneling commands to "ip". + +config FEATURE_IP_RULE + bool "ip rule" + default n + depends on IP + help + Add support for rule commands to "ip". + +config FEATURE_IP_SHORT_FORMS + bool "Support short forms of ip commands" + default n + depends on IP + help + Also support short-form of ip <OBJECT> commands: + ip addr -> ipaddr + ip link -> iplink + ip route -> iproute + ip tunnel -> iptunnel + ip rule -> iprule + + Say N unless you desparately need the short form of the ip + object commands. + +config FEATURE_IP_RARE_PROTOCOLS + bool "Support displaying rarely used link types" + default n + depends on IP + help + If you are not going to use links of type "frad", "econet", + "bif" etc, you probably don't need to enable this. + Ethernet, wireless, infrared, ppp/slip, ip tunnelling + link types are supported without this option selected. + +config IPADDR + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS + +config IPLINK + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK + +config IPROUTE + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE + +config IPTUNNEL + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL + +config IPRULE + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE + +config IPCALC + bool "ipcalc" + default n + help + ipcalc takes an IP address and netmask and calculates the + resulting broadcast, network, and host range. + +config FEATURE_IPCALC_FANCY + bool "Fancy IPCALC, more options, adds 1 kbyte" + default y + depends on IPCALC + help + Adds the options hostname, prefix and silent to the output of + "ipcalc". + +config FEATURE_IPCALC_LONG_OPTIONS + bool "Enable long options" + default n + depends on IPCALC && LONG_OPTS + help + Support long options for the ipcalc applet. + +config NAMEIF + bool "nameif" + default n + select FEATURE_SYSLOG + help + nameif is used to rename network interface by its MAC address. + Renamed interfaces MUST be in the down state. + It is possible to use a file (default: /etc/mactab) + with list of new interface names and MACs. + Maximum interface name length: IFNAMSIZ = 16 + File fields are separated by space or tab. + File format: + # Comment + new_interface_name XX:XX:XX:XX:XX:XX + +config FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default n + depends on NAMEIF + help + This extends the nameif syntax to support the bus_info and driver + checks. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 + +config NC + bool "nc" + default n + help + A simple Unix utility which reads and writes data across network + connections. + +config NC_SERVER + bool "Netcat server options (-l)" + default n + depends on NC + help + Allow netcat to act as a server. + +config NC_EXTRA + bool "Netcat extensions (-eiw and filename)" + default n + depends on NC + help + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). + +config NETSTAT + bool "netstat" + default n + help + netstat prints information about the Linux networking subsystem. + +config FEATURE_NETSTAT_WIDE + bool "Enable wide netstat output" + default n + depends on NETSTAT + help + Add support for wide columns. Useful when displaying IPv6 addresses + (-W option). + +config FEATURE_NETSTAT_PRG + bool "Enable PID/Program name output" + default n + depends on NETSTAT + help + Add support for -p flag to print out PID and program name. + +700 bytes of code. + +config NSLOOKUP + bool "nslookup" + default n + help + nslookup is a tool to query Internet name servers. + +config NTPD + bool "ntpd" + default n + help + The NTP client/server daemon. + +config FEATURE_NTPD_SERVER + bool "Make ntpd usable as a NTP server" + default y + depends on NTPD + help + Make ntpd usable as a NTP server. If you disable this option + ntpd will be usable only as a NTP client. + +config PING + bool "ping" + default n + help + ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to + elicit an ICMP ECHO_RESPONSE from a host or gateway. + +config PING6 + bool "ping6" + default n + depends on FEATURE_IPV6 && PING + help + This will give you a ping that can talk IPv6. + +config FEATURE_FANCY_PING + bool "Enable fancy ping output" + default y + depends on PING + help + Make the output from the ping applet include statistics, and at the + same time provide full support for ICMP packets. + +config PSCAN + bool "pscan" + default n + help + Simple network port scanner. + +config ROUTE + bool "route" + default n + help + Route displays or manipulates the kernel's IP routing tables. + +config SLATTACH + bool "slattach" + default n + help + slattach is a small utility to attach network interfaces to serial + lines. + +#config TC +# bool "tc" +# default n +# help +# show / manipulate traffic control settings +# +#config FEATURE_TC_INGRESS +# def_bool n +# depends on TC + +config TCPSVD + bool "tcpsvd" + default n + help + tcpsvd listens on a TCP port and runs a program for each new + connection. + +config TELNET + bool "telnet" + default n + help + Telnet is an interface to the TELNET protocol, but is also commonly + used to test other simple protocols. + +config FEATURE_TELNET_TTYPE + bool "Pass TERM type to remote host" + default y + depends on TELNET + help + Setting this option will forward the TERM environment variable to the + remote host you are connecting to. This is useful to make sure that + things like ANSI colors and other control sequences behave. + +config FEATURE_TELNET_AUTOLOGIN + bool "Pass USER type to remote host" + default y + depends on TELNET + help + Setting this option will forward the USER environment variable to the + remote host you are connecting to. This is useful when you need to + log into a machine without telling the username (autologin). This + option enables `-a' and `-l USER' arguments. + +config TELNETD + bool "telnetd" + default n + select FEATURE_SYSLOG + help + A daemon for the TELNET protocol, allowing you to log onto the host + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a + more secure alternative, you should seriously consider installing the + very small Dropbear SSH daemon instead: + http://matt.ucc.asn.au/dropbear/dropbear.html + + Note that for busybox telnetd to work you need several things: + First of all, your kernel needs: + UNIX98_PTYS=y + DEVPTS_FS=y + + Next, you need a /dev/pts directory on your root filesystem: + + $ ls -ld /dev/pts + drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ + + Next you need the pseudo terminal master multiplexer /dev/ptmx: + + $ ls -la /dev/ptmx + crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx + + Any /dev/ttyp[0-9]* files you may have can be removed. + Next, you need to mount the devpts filesystem on /dev/pts using: + + mount -t devpts devpts /dev/pts + + You need to be sure that Busybox has LOGIN and + FEATURE_SUID enabled. And finally, you should make + certain that Busybox has been installed setuid root: + + chown root.root /bin/busybox + chmod 4755 /bin/busybox + + with all that done, telnetd _should_ work.... + + +config FEATURE_TELNETD_STANDALONE + bool "Support standalone telnetd (not inetd only)" + default n + depends on TELNETD + help + Selecting this will make telnetd able to run standalone. + +config FEATURE_TELNETD_INETD_WAIT + bool "Support -w SEC option (inetd wait mode)" + default n + depends on FEATURE_TELNETD_STANDALONE + help + This option allows you to run telnetd in "inet wait" mode. + Example inetd.conf line (note "wait", not usual "nowait"): + + telnet stream tcp wait root /bin/telnetd telnetd -w10 + + In this example, inetd passes _listening_ socket_ as fd 0 + to telnetd when connection appears. + telnetd will wait for connections until all existing + connections are closed, and no new connections + appear during 10 seconds. Then it exits, and inetd continues + to listen for new connections. + + This option is rarely used. "tcp nowait" is much more usual + way of running tcp services, including telnetd. + You most probably want to say N here. + +config TFTP + bool "tftp" + default n + help + This enables the Trivial File Transfer Protocol client program. TFTP + is usually used for simple, small transfers such as a root image + for a network-enabled bootloader. + +config TFTPD + bool "tftpd" + default n + help + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + +config FEATURE_TFTP_GET + bool "Enable 'tftp get' and/or tftpd upload code" + default y + depends on TFTP || TFTPD + help + Add support for the GET command within the TFTP client. This allows + a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. + + Note: this option does _not_ make tftpd capable of download + (the usual operation people need from it)! + +config FEATURE_TFTP_PUT + bool "Enable 'tftp put' and/or tftpd download code" + default y + depends on TFTP || TFTPD + help + Add support for the PUT command within the TFTP client. This allows + a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. + +config FEATURE_TFTP_BLOCKSIZE + bool "Enable 'blksize' and 'tsize' protocol options" + default n + depends on TFTP || TFTPD + help + Allow tftp to specify block size, and tftpd to understand + "blksize" and "tsize" options. + +config FEATURE_TFTP_PROGRESS_BAR + bool "Enable tftp progress meter" + default n + depends on TFTP && FEATURE_TFTP_BLOCKSIZE + help + Show progress bar. + +config TFTP_DEBUG + bool "Enable debug" + default n + depends on TFTP || TFTPD + help + Make tftp[d] print debugging messages on stderr. + This is useful if you are diagnosing a bug in tftp[d]. + +config TRACEROUTE + bool "traceroute" + default n + help + Utility to trace the route of IP packets. + +config TRACEROUTE6 + bool "traceroute6" + default n + depends on FEATURE_IPV6 && TRACEROUTE + help + Utility to trace the route of IPv6 packets. + +config FEATURE_TRACEROUTE_VERBOSE + bool "Enable verbose output" + default n + depends on TRACEROUTE + help + Add some verbosity to traceroute. This includes among other things + hostnames and ICMP response types. + +config FEATURE_TRACEROUTE_SOURCE_ROUTE + bool "Enable loose source route" + default n + depends on TRACEROUTE + help + Add option to specify a loose source route gateway + (8 maximum). + +config FEATURE_TRACEROUTE_USE_ICMP + bool "Use ICMP instead of UDP" + default n + depends on TRACEROUTE + help + Add option -I to use ICMP ECHO instead of UDP datagrams. + +config TUNCTL + bool "tunctl" + default n + help + tunctl creates or deletes tun devices. + +config FEATURE_TUNCTL_UG + bool "Support owner:group assignment" + default n + depends on TUNCTL + help + Allow to specify owner and group of newly created interface. + 340 bytes of pure bloat. Say no here. + +source networking/udhcp/Config.in + +config IFUPDOWN_UDHCPC_CMD_OPTIONS + string "ifup udhcpc command line options" + default "-R -n" + depends on IFUPDOWN && UDHCPC + help + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) + +config UDPSVD + bool "udpsvd" + default n + help + udpsvd listens on an UDP port and runs a program for each new + connection. + +config VCONFIG + bool "vconfig" + default n + help + Creates, removes, and configures VLAN interfaces + +config WGET + bool "wget" + default n + help + wget is a utility for non-interactive download of files from HTTP, + HTTPS, and FTP servers. + +config FEATURE_WGET_STATUSBAR + bool "Enable a nifty process meter (+2k)" + default y + depends on WGET + help + Enable the transfer progress bar for wget transfers. + +config FEATURE_WGET_AUTHENTICATION + bool "Enable HTTP authentication" + default y + depends on WGET + help + Support authenticated HTTP transfers. + +config FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" + default n + depends on WGET && LONG_OPTS + help + Support long options for the wget applet. + +config ZCIP + bool "zcip" + default n + select FEATURE_SYSLOG + help + ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. + It's a daemon that allocates and defends a dynamically assigned + address on the 169.254/16 network, requiring no system administrator. + + See http://www.zeroconf.org for further details, and "zcip.script" + in the busybox examples. + +endmenu |