diff options
Diffstat (limited to 'miscutils')
38 files changed, 212 insertions, 213 deletions
diff --git a/miscutils/adjtimex.c b/miscutils/adjtimex.c index c91527f..04ba563 100644 --- a/miscutils/adjtimex.c +++ b/miscutils/adjtimex.c @@ -15,8 +15,8 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Adjtimex reads and optionally sets adjustment parameters for -//config: the Linux clock adjustment algorithm. +//config: Adjtimex reads and optionally sets adjustment parameters for +//config: the Linux clock adjustment algorithm. //applet:IF_ADJTIMEX(APPLET(adjtimex, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/bbconfig.c b/miscutils/bbconfig.c index faaacad..045aca2 100644 --- a/miscutils/bbconfig.c +++ b/miscutils/bbconfig.c @@ -5,22 +5,22 @@ //config: bool "bbconfig (9.7 kb)" //config: default n //config: help -//config: The bbconfig applet will print the config file with which -//config: busybox was built. +//config: The bbconfig applet will print the config file with which +//config: busybox was built. //config: //config:config FEATURE_COMPRESS_BBCONFIG //config: bool "Compress bbconfig data" //config: default y //config: depends on BBCONFIG //config: help -//config: Store bbconfig data in compressed form, uncompress them on-the-fly -//config: before output. +//config: Store bbconfig data in compressed form, uncompress them on-the-fly +//config: before output. //config: -//config: If you have a really tiny busybox with few applets enabled (and -//config: bunzip2 isn't one of them), the overhead of the decompressor might -//config: be noticeable. Also, if you run executables directly from ROM -//config: and have very little memory, this might not be a win. Otherwise, -//config: you probably want this. +//config: If you have a really tiny busybox with few applets enabled (and +//config: bunzip2 isn't one of them), the overhead of the decompressor might +//config: be noticeable. Also, if you run executables directly from ROM +//config: and have very little memory, this might not be a win. Otherwise, +//config: you probably want this. //applet:IF_BBCONFIG(APPLET(bbconfig, BB_DIR_BIN, BB_SUID_DROP)) diff --git a/miscutils/beep.c b/miscutils/beep.c index 782656f..b9b62f7 100644 --- a/miscutils/beep.c +++ b/miscutils/beep.c @@ -12,7 +12,7 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: The beep applets beeps in a given freq/Hz. +//config: The beep applets beeps in a given freq/Hz. //config: //config:config FEATURE_BEEP_FREQ //config: int "default frequency" @@ -20,7 +20,7 @@ //config: default 4000 //config: depends on BEEP //config: help -//config: Frequency for default beep. +//config: Frequency for default beep. //config: //config:config FEATURE_BEEP_LENGTH_MS //config: int "default length" @@ -28,7 +28,7 @@ //config: default 30 //config: depends on BEEP //config: help -//config: Length in ms for default beep. +//config: Length in ms for default beep. //applet:IF_BEEP(APPLET(beep, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/chat.c b/miscutils/chat.c index a1dc753..216a899 100644 --- a/miscutils/chat.c +++ b/miscutils/chat.c @@ -11,68 +11,68 @@ //config: bool "chat (6.6 kb)" //config: default y //config: help -//config: Simple chat utility. +//config: Simple chat utility. //config: //config:config FEATURE_CHAT_NOFAIL //config: bool "Enable NOFAIL expect strings" //config: depends on CHAT //config: default y //config: help -//config: When enabled expect strings which are started with a dash trigger -//config: no-fail mode. That is when expectation is not met within timeout -//config: the script is not terminated but sends next SEND string and waits -//config: for next EXPECT string. This allows to compose far more flexible -//config: scripts. +//config: When enabled expect strings which are started with a dash trigger +//config: no-fail mode. That is when expectation is not met within timeout +//config: the script is not terminated but sends next SEND string and waits +//config: for next EXPECT string. This allows to compose far more flexible +//config: scripts. //config: //config:config FEATURE_CHAT_TTY_HIFI //config: bool "Force STDIN to be a TTY" //config: depends on CHAT //config: default n //config: help -//config: Original chat always treats STDIN as a TTY device and sets for it -//config: so-called raw mode. This option turns on such behaviour. +//config: Original chat always treats STDIN as a TTY device and sets for it +//config: so-called raw mode. This option turns on such behaviour. //config: //config:config FEATURE_CHAT_IMPLICIT_CR //config: bool "Enable implicit Carriage Return" //config: depends on CHAT //config: default y //config: help -//config: When enabled make chat to terminate all SEND strings with a "\r" -//config: unless "\c" is met anywhere in the string. +//config: When enabled make chat to terminate all SEND strings with a "\r" +//config: unless "\c" is met anywhere in the string. //config: //config:config FEATURE_CHAT_SWALLOW_OPTS //config: bool "Swallow options" //config: depends on CHAT //config: default y //config: help -//config: Busybox chat require no options. To make it not fail when used -//config: in place of original chat (which has a bunch of options) turn -//config: this on. +//config: Busybox chat require no options. To make it not fail when used +//config: in place of original chat (which has a bunch of options) turn +//config: this on. //config: //config:config FEATURE_CHAT_SEND_ESCAPES //config: bool "Support weird SEND escapes" //config: depends on CHAT //config: default y //config: help -//config: Original chat uses some escape sequences in SEND arguments which -//config: are not sent to device but rather performs special actions. -//config: E.g. "\K" means to send a break sequence to device. -//config: "\d" delays execution for a second, "\p" -- for a 1/100 of second. -//config: Before turning this option on think twice: do you really need them? +//config: Original chat uses some escape sequences in SEND arguments which +//config: are not sent to device but rather performs special actions. +//config: E.g. "\K" means to send a break sequence to device. +//config: "\d" delays execution for a second, "\p" -- for a 1/100 of second. +//config: Before turning this option on think twice: do you really need them? //config: //config:config FEATURE_CHAT_VAR_ABORT_LEN //config: bool "Support variable-length ABORT conditions" //config: depends on CHAT //config: default y //config: help -//config: Original chat uses fixed 50-bytes length ABORT conditions. Say N here. +//config: Original chat uses fixed 50-bytes length ABORT conditions. Say N here. //config: //config:config FEATURE_CHAT_CLR_ABORT //config: bool "Support revoking of ABORT conditions" //config: depends on CHAT //config: default y //config: help -//config: Support CLR_ABORT directive. +//config: Support CLR_ABORT directive. //applet:IF_CHAT(APPLET(chat, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/conspy.c b/miscutils/conspy.c index 22a6918..47b9e72 100644 --- a/miscutils/conspy.c +++ b/miscutils/conspy.c @@ -14,10 +14,10 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: A text-mode VNC like program for Linux virtual terminals. -//config: example: conspy NUM shared access to console num -//config: or conspy -nd NUM screenshot of console num -//config: or conspy -cs NUM poor man's GNU screen like +//config: A text-mode VNC like program for Linux virtual terminals. +//config: example: conspy NUM shared access to console num +//config: or conspy -nd NUM screenshot of console num +//config: or conspy -cs NUM poor man's GNU screen like //applet:IF_CONSPY(APPLET(conspy, BB_DIR_BIN, BB_SUID_DROP)) diff --git a/miscutils/crond.c b/miscutils/crond.c index 8d24f29..6c54e1a 100644 --- a/miscutils/crond.c +++ b/miscutils/crond.c @@ -13,50 +13,50 @@ //config: default y //config: select FEATURE_SYSLOG //config: help -//config: Crond is a background daemon that parses individual crontab -//config: files and executes commands on behalf of the users in question. -//config: This is a port of dcron from slackware. It uses files of the -//config: format /var/spool/cron/crontabs/<username> files, for example: -//config: $ cat /var/spool/cron/crontabs/root -//config: # Run daily cron jobs at 4:40 every day: -//config: 40 4 * * * /etc/cron/daily > /dev/null 2>&1 +//config: Crond is a background daemon that parses individual crontab +//config: files and executes commands on behalf of the users in question. +//config: This is a port of dcron from slackware. It uses files of the +//config: format /var/spool/cron/crontabs/<username> files, for example: +//config: $ cat /var/spool/cron/crontabs/root +//config: # Run daily cron jobs at 4:40 every day: +//config: 40 4 * * * /etc/cron/daily > /dev/null 2>&1 //config: //config:config FEATURE_CROND_D //config: bool "Support option -d to redirect output to stderr" //config: depends on CROND //config: default y //config: help -//config: -d N sets loglevel (0:most verbose) and directs all output to stderr. +//config: -d N sets loglevel (0:most verbose) and directs all output to stderr. //config: //config:config FEATURE_CROND_CALL_SENDMAIL //config: bool "Report command output via email (using sendmail)" //config: default y //config: depends on CROND //config: help -//config: Command output will be sent to corresponding user via email. +//config: Command output will be sent to corresponding user via email. //config: //config:config FEATURE_CROND_SPECIAL_TIMES //config: bool "Support special times (@reboot, @daily, etc) in crontabs" //config: default y //config: depends on CROND //config: help -//config: string meaning -//config: ------ ------- -//config: @reboot Run once, at startup -//config: @yearly Run once a year: "0 0 1 1 *" -//config: @annually Same as @yearly: "0 0 1 1 *" -//config: @monthly Run once a month: "0 0 1 * *" -//config: @weekly Run once a week: "0 0 * * 0" -//config: @daily Run once a day: "0 0 * * *" -//config: @midnight Same as @daily: "0 0 * * *" -//config: @hourly Run once an hour: "0 * * * *" +//config: string meaning +//config: ------ ------- +//config: @reboot Run once, at startup +//config: @yearly Run once a year: "0 0 1 1 *" +//config: @annually Same as @yearly: "0 0 1 1 *" +//config: @monthly Run once a month: "0 0 1 * *" +//config: @weekly Run once a week: "0 0 * * 0" +//config: @daily Run once a day: "0 0 * * *" +//config: @midnight Same as @daily: "0 0 * * *" +//config: @hourly Run once an hour: "0 * * * *" //config: //config:config FEATURE_CROND_DIR //config: string "crond spool directory" //config: default "/var/spool/cron" //config: depends on CROND || CRONTAB //config: help -//config: Location of crond spool. +//config: Location of crond spool. //applet:IF_CROND(APPLET(crond, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/crontab.c b/miscutils/crontab.c index 4093075..23cb548 100644 --- a/miscutils/crontab.c +++ b/miscutils/crontab.c @@ -13,10 +13,10 @@ //config: bool "crontab (9.7 kb)" //config: default y //config: help -//config: Crontab manipulates the crontab for a particular user. Only -//config: the superuser may specify a different user and/or crontab directory. -//config: Note that Busybox binary must be setuid root for this applet to -//config: work properly. +//config: Crontab manipulates the crontab for a particular user. Only +//config: the superuser may specify a different user and/or crontab directory. +//config: Note that Busybox binary must be setuid root for this applet to +//config: work properly. /* Needs to be run by root or be suid root - needs to change /var/spool/cron* files: */ //applet:IF_CRONTAB(APPLET(crontab, BB_DIR_USR_BIN, BB_SUID_REQUIRE)) diff --git a/miscutils/dc.c b/miscutils/dc.c index d4cd499..b922a71 100644 --- a/miscutils/dc.c +++ b/miscutils/dc.c @@ -6,16 +6,16 @@ //config: bool "dc (4.2 kb)" //config: default y //config: help -//config: Dc is a reverse-polish desk calculator which supports unlimited -//config: precision arithmetic. +//config: Dc is a reverse-polish desk calculator which supports unlimited +//config: precision arithmetic. //config: //config:config FEATURE_DC_LIBM //config: bool "Enable power and exp functions (requires libm)" //config: default y //config: depends on DC //config: help -//config: Enable power and exp functions. -//config: NOTE: This will require libm to be present for linking. +//config: Enable power and exp functions. +//config: NOTE: This will require libm to be present for linking. //applet:IF_DC(APPLET(dc, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/devfsd.c b/miscutils/devfsd.c index 334f107..814714f 100644 --- a/miscutils/devfsd.c +++ b/miscutils/devfsd.c @@ -59,56 +59,55 @@ //config: select PLATFORM_LINUX //config: select FEATURE_SYSLOG //config: help -//config: This is deprecated and should NOT be used anymore. -//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead! -//config: See docs/mdev.txt for detailed instructions on how to use mdev -//config: instead. +//config: This is deprecated and should NOT be used anymore. +//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead! +//config: See docs/mdev.txt for detailed instructions on how to use mdev +//config: instead. //config: -//config: Provides compatibility with old device names on a devfs systems. -//config: You should set it to true if you have devfs enabled. -//config: The following keywords in devsfd.conf are supported: -//config: "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", -//config: "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", -//config: "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". +//config: Provides compatibility with old device names on a devfs systems. +//config: You should set it to true if you have devfs enabled. +//config: The following keywords in devsfd.conf are supported: +//config: "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", +//config: "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", +//config: "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". //config: -//config: But only if they are written UPPERCASE!!!!!!!! +//config: But only if they are written UPPERCASE!!!!!!!! //config: //config:config DEVFSD_MODLOAD //config: bool "Adds support for MODLOAD keyword in devsfd.conf" //config: default y //config: depends on DEVFSD //config: help -//config: This actually doesn't work with busybox modutils but needs -//config: the external modutils. +//config: This actually doesn't work with busybox modutils but needs +//config: the external modutils. //config: //config:config DEVFSD_FG_NP //config: bool "Enable the -fg and -np options" //config: default y //config: depends on DEVFSD //config: help -//config: -fg Run the daemon in the foreground. -//config: -np Exit after parsing the configuration file. -//config: Do not poll for events. +//config: -fg Run the daemon in the foreground. +//config: -np Exit after parsing config. Do not poll for events. //config: //config:config DEVFSD_VERBOSE //config: bool "Increases logging (and size)" //config: default y //config: depends on DEVFSD //config: help -//config: Increases logging to stderr or syslog. +//config: Increases logging to stderr or syslog. //config: //config:config FEATURE_DEVFS //config: bool "Use devfs names for all devices (obsolete)" //config: default n //config: select PLATFORM_LINUX //config: help -//config: This is obsolete and should NOT be used anymore. -//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead! +//config: This is obsolete and should NOT be used anymore. +//config: Use linux >= 2.6 (optionally with hotplug) and mdev instead! //config: -//config: For legacy systems -- if there is no way around devfsd -- this -//config: tells busybox to look for names like /dev/loop/0 instead of -//config: /dev/loop0. If your /dev directory has normal names instead of -//config: devfs names, you don't want this. +//config: For legacy systems -- if there is no way around devfsd -- this +//config: tells busybox to look for names like /dev/loop/0 instead of +//config: /dev/loop0. If your /dev directory has normal names instead of +//config: devfs names, you don't want this. //applet:IF_DEVFSD(APPLET(devfsd, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/devmem.c b/miscutils/devmem.c index ec911a7..6240547 100644 --- a/miscutils/devmem.c +++ b/miscutils/devmem.c @@ -7,8 +7,8 @@ //config: bool "devmem (2.5 kb)" //config: default y //config: help -//config: devmem is a small program that reads and writes from physical -//config: memory using /dev/mem. +//config: devmem is a small program that reads and writes from physical +//config: memory using /dev/mem. //applet:IF_DEVMEM(APPLET(devmem, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/fbsplash.c b/miscutils/fbsplash.c index 4c891de..9ac91e0 100644 --- a/miscutils/fbsplash.c +++ b/miscutils/fbsplash.c @@ -25,20 +25,20 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Shows splash image and progress bar on framebuffer device. -//config: Can be used during boot phase of an embedded device. ~2kb. -//config: Usage: -//config: - use kernel option 'vga=xxx' or otherwise enable fb device. -//config: - put somewhere fbsplash.cfg file and an image in .ppm format. -//config: - $ setsid fbsplash [params] & +//config: Shows splash image and progress bar on framebuffer device. +//config: Can be used during boot phase of an embedded device. +//config: Usage: +//config: - use kernel option 'vga=xxx' or otherwise enable fb device. +//config: - put somewhere fbsplash.cfg file and an image in .ppm format. +//config: - $ setsid fbsplash [params] & //config: -c: hide cursor //config: -d /dev/fbN: framebuffer device (if not /dev/fb0) //config: -s path_to_image_file (can be "-" for stdin) //config: -i path_to_cfg_file (can be "-" for stdin) //config: -f path_to_fifo (can be "-" for stdin) -//config: - if you want to run it only in presence of kernel parameter: +//config: - if you want to run it only in presence of kernel parameter: //config: grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] & -//config: - commands for fifo: +//config: - commands for fifo: //config: "NN" (ASCII decimal number) - percentage to show on progress bar //config: "exit" - well you guessed it diff --git a/miscutils/flash_eraseall.c b/miscutils/flash_eraseall.c index b64fda3..af9ebea 100644 --- a/miscutils/flash_eraseall.c +++ b/miscutils/flash_eraseall.c @@ -13,8 +13,8 @@ //config: bool "flash_eraseall (5.5 kb)" //config: default n # doesn't build on Ubuntu 8.04 //config: help -//config: The flash_eraseall binary from mtd-utils as of git head c4c6a59eb. -//config: This utility is used to erase the whole MTD device. +//config: The flash_eraseall binary from mtd-utils as of git head c4c6a59eb. +//config: This utility is used to erase the whole MTD device. //applet:IF_FLASH_ERASEALL(APPLET(flash_eraseall, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/flash_lock_unlock.c b/miscutils/flash_lock_unlock.c index 00de3da..374eed5 100644 --- a/miscutils/flash_lock_unlock.c +++ b/miscutils/flash_lock_unlock.c @@ -7,15 +7,15 @@ //config: bool "flash_lock (2.1 kb)" //config: default n # doesn't build on Ubuntu 8.04 //config: help -//config: The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This -//config: utility locks part or all of the flash device. +//config: The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This +//config: utility locks part or all of the flash device. //config: //config:config FLASH_UNLOCK //config: bool "flash_unlock (1.3 kb)" //config: default n # doesn't build on Ubuntu 8.04 //config: help -//config: The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This -//config: utility unlocks part or all of the flash device. +//config: The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This +//config: utility unlocks part or all of the flash device. // APPLET_ODDNAME:name main location suid_type help //applet:IF_FLASH_LOCK( APPLET_ODDNAME(flash_lock, flash_lock_unlock, BB_DIR_USR_SBIN, BB_SUID_DROP, flash_lock)) diff --git a/miscutils/flashcp.c b/miscutils/flashcp.c index f6f61cf..d4ac62d 100644 --- a/miscutils/flashcp.c +++ b/miscutils/flashcp.c @@ -10,8 +10,8 @@ //config: bool "flashcp (5.4 kb)" //config: default n # doesn't build on Ubuntu 8.04 //config: help -//config: The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7. -//config: This utility is used to copy images into a MTD device. +//config: The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7. +//config: This utility is used to copy images into a MTD device. //applet:IF_FLASHCP(APPLET(flashcp, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/hdparm.c b/miscutils/hdparm.c index af7fb99..0bbe6ca 100644 --- a/miscutils/hdparm.c +++ b/miscutils/hdparm.c @@ -16,58 +16,58 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Get/Set hard drive parameters. Primarily intended for ATA -//config: drives. +//config: Get/Set hard drive parameters. Primarily intended for ATA +//config: drives. //config: //config:config FEATURE_HDPARM_GET_IDENTITY //config: bool "Support obtaining detailed information directly from drives" //config: default y //config: depends on HDPARM //config: help -//config: Enable the -I and -i options to obtain detailed information -//config: directly from drives about their capabilities and supported ATA -//config: feature set. If no device name is specified, hdparm will read -//config: identify data from stdin. Enabling this option will add about 16k... +//config: Enable the -I and -i options to obtain detailed information +//config: directly from drives about their capabilities and supported ATA +//config: feature set. If no device name is specified, hdparm will read +//config: identify data from stdin. Enabling this option will add about 16k... //config: //config:config FEATURE_HDPARM_HDIO_SCAN_HWIF //config: bool "Register an IDE interface (DANGEROUS)" //config: default y //config: depends on HDPARM //config: help -//config: Enable the 'hdparm -R' option to register an IDE interface. -//config: This is dangerous stuff, so you should probably say N. +//config: Enable the 'hdparm -R' option to register an IDE interface. +//config: This is dangerous stuff, so you should probably say N. //config: //config:config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF //config: bool "Un-register an IDE interface (DANGEROUS)" //config: default y //config: depends on HDPARM //config: help -//config: Enable the 'hdparm -U' option to un-register an IDE interface. -//config: This is dangerous stuff, so you should probably say N. +//config: Enable the 'hdparm -U' option to un-register an IDE interface. +//config: This is dangerous stuff, so you should probably say N. //config: //config:config FEATURE_HDPARM_HDIO_DRIVE_RESET //config: bool "Perform device reset (DANGEROUS)" //config: default y //config: depends on HDPARM //config: help -//config: Enable the 'hdparm -w' option to perform a device reset. -//config: This is dangerous stuff, so you should probably say N. +//config: Enable the 'hdparm -w' option to perform a device reset. +//config: This is dangerous stuff, so you should probably say N. //config: //config:config FEATURE_HDPARM_HDIO_TRISTATE_HWIF //config: bool "Tristate device for hotswap (DANGEROUS)" //config: default y //config: depends on HDPARM //config: help -//config: Enable the 'hdparm -x' option to tristate device for hotswap, -//config: and the '-b' option to get/set bus state. This is dangerous -//config: stuff, so you should probably say N. +//config: Enable the 'hdparm -x' option to tristate device for hotswap, +//config: and the '-b' option to get/set bus state. This is dangerous +//config: stuff, so you should probably say N. //config: //config:config FEATURE_HDPARM_HDIO_GETSET_DMA //config: bool "Get/set using_dma flag" //config: default y //config: depends on HDPARM //config: help -//config: Enable the 'hdparm -d' option to get/set using_dma flag. +//config: Enable the 'hdparm -d' option to get/set using_dma flag. //applet:IF_HDPARM(APPLET(hdparm, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/i2c_tools.c b/miscutils/i2c_tools.c index 5786139..ca2580e 100644 --- a/miscutils/i2c_tools.c +++ b/miscutils/i2c_tools.c @@ -14,28 +14,28 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Read from I2C/SMBus chip registers. +//config: Read from I2C/SMBus chip registers. //config: //config:config I2CSET //config: bool "i2cset (6.9 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Set I2C registers. +//config: Set I2C registers. //config: //config:config I2CDUMP //config: bool "i2cdump (7.2 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Examine I2C registers. +//config: Examine I2C registers. //config: //config:config I2CDETECT //config: bool "i2cdetect (7.2 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Detect I2C chips. +//config: Detect I2C chips. //config: //applet:IF_I2CGET(APPLET(i2cget, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/inotifyd.c b/miscutils/inotifyd.c index 2e0163e..0060797 100644 --- a/miscutils/inotifyd.c +++ b/miscutils/inotifyd.c @@ -30,8 +30,8 @@ //config: bool "inotifyd (3.5 kb)" //config: default n # doesn't build on Knoppix 5 //config: help -//config: Simple inotify daemon. Reports filesystem changes. Requires -//config: kernel >= 2.6.13 +//config: Simple inotify daemon. Reports filesystem changes. Requires +//config: kernel >= 2.6.13 //applet:IF_INOTIFYD(APPLET(inotifyd, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/less.c b/miscutils/less.c index a4ef151..c1d5e1b 100644 --- a/miscutils/less.c +++ b/miscutils/less.c @@ -25,8 +25,8 @@ //config: bool "less (15 kb)" //config: default y //config: help -//config: 'less' is a pager, meaning that it displays text files. It possesses -//config: a wide array of features, and is an improvement over 'more'. +//config: 'less' is a pager, meaning that it displays text files. It possesses +//config: a wide array of features, and is an improvement over 'more'. //config: //config:config FEATURE_LESS_MAXLINES //config: int "Max number of input lines less will try to eat" @@ -38,64 +38,64 @@ //config: default y //config: depends on LESS //config: help -//config: This option adds the capability to search for matching left and right -//config: brackets, facilitating programming. +//config: This option adds the capability to search for matching left and right +//config: brackets, facilitating programming. //config: //config:config FEATURE_LESS_FLAGS //config: bool "Enable -m/-M" //config: default y //config: depends on LESS //config: help -//config: The -M/-m flag enables a more sophisticated status line. +//config: The -M/-m flag enables a more sophisticated status line. //config: //config:config FEATURE_LESS_TRUNCATE //config: bool "Enable -S" //config: default y //config: depends on LESS //config: help -//config: The -S flag causes long lines to be truncated rather than -//config: wrapped. +//config: The -S flag causes long lines to be truncated rather than +//config: wrapped. //config: //config:config FEATURE_LESS_MARKS //config: bool "Enable marks" //config: default y //config: depends on LESS //config: help -//config: Marks enable positions in a file to be stored for easy reference. +//config: Marks enable positions in a file to be stored for easy reference. //config: //config:config FEATURE_LESS_REGEXP //config: bool "Enable regular expressions" //config: default y //config: depends on LESS //config: help -//config: Enable regular expressions, allowing complex file searches. +//config: Enable regular expressions, allowing complex file searches. //config: //config:config FEATURE_LESS_WINCH //config: bool "Enable automatic resizing on window size changes" //config: default y //config: depends on LESS //config: help -//config: Makes less track window size changes. +//config: Makes less track window size changes. //config: //config:config FEATURE_LESS_ASK_TERMINAL //config: bool "Use 'tell me cursor position' ESC sequence to measure window" //config: default y //config: depends on FEATURE_LESS_WINCH //config: help -//config: Makes less track window size changes. -//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set, -//config: this option makes less perform a last-ditch effort to find it: -//config: position cursor to 999,999 and ask terminal to report real -//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin. -//config: This is not clean but helps a lot on serial lines and such. +//config: Makes less track window size changes. +//config: If terminal size can't be retrieved and $LINES/$COLUMNS are not set, +//config: this option makes less perform a last-ditch effort to find it: +//config: position cursor to 999,999 and ask terminal to report real +//config: cursor position using "ESC [ 6 n" escape sequence, then read stdin. +//config: This is not clean but helps a lot on serial lines and such. //config: //config:config FEATURE_LESS_DASHCMD //config: bool "Enable flag changes ('-' command)" //config: default y //config: depends on LESS //config: help -//config: This enables the ability to change command-line flags within -//config: less itself ('-' keyboard command). +//config: This enables the ability to change command-line flags within +//config: less itself ('-' keyboard command). //config: //config:config FEATURE_LESS_LINENUMS //config: bool "Enable -N (dynamic switching of line numbers)" diff --git a/miscutils/lsscsi.c b/miscutils/lsscsi.c index 72fafef..b69ff1e 100644 --- a/miscutils/lsscsi.c +++ b/miscutils/lsscsi.c @@ -11,10 +11,10 @@ //config: default y //config: #select PLATFORM_LINUX //config: help -//config: lsscsi is a utility for displaying information about SCSI buses in the -//config: system and devices connected to them. +//config: lsscsi is a utility for displaying information about SCSI buses in the +//config: system and devices connected to them. //config: -//config: This version uses sysfs (/sys/bus/scsi/devices) only. +//config: This version uses sysfs (/sys/bus/scsi/devices) only. //applet:IF_LSSCSI(APPLET(lsscsi, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/makedevs.c b/miscutils/makedevs.c index 5f8593a..c2f86df 100644 --- a/miscutils/makedevs.c +++ b/miscutils/makedevs.c @@ -10,20 +10,20 @@ //config: bool "makedevs (9.3 kb)" //config: default y //config: help -//config: 'makedevs' is a utility used to create a batch of devices with -//config: one command. +//config: 'makedevs' is a utility used to create a batch of devices with +//config: one command. //config: -//config: There are two choices for command line behaviour, the interface -//config: as used by LEAF/Linux Router Project, or a device table file. +//config: There are two choices for command line behaviour, the interface +//config: as used by LEAF/Linux Router Project, or a device table file. //config: -//config: 'leaf' is traditionally what busybox follows, it allows multiple -//config: devices of a particluar type to be created per command. -//config: e.g. /dev/hda[0-9] -//config: Device properties are passed as command line arguments. +//config: 'leaf' is traditionally what busybox follows, it allows multiple +//config: devices of a particluar type to be created per command. +//config: e.g. /dev/hda[0-9] +//config: Device properties are passed as command line arguments. //config: -//config: 'table' reads device properties from a file or stdin, allowing -//config: a batch of unrelated devices to be made with one command. -//config: User/group names are allowed as an alternative to uid/gid. +//config: 'table' reads device properties from a file or stdin, allowing +//config: a batch of unrelated devices to be made with one command. +//config: User/group names are allowed as an alternative to uid/gid. //config: //config:choice //config: prompt "Choose makedevs behaviour" diff --git a/miscutils/man.c b/miscutils/man.c index de6ef19..a16202f 100644 --- a/miscutils/man.c +++ b/miscutils/man.c @@ -6,7 +6,7 @@ //config: bool "man (27 kb)" //config: default y //config: help -//config: Format and display manual pages. +//config: Format and display manual pages. //applet:IF_MAN(APPLET(man, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/microcom.c b/miscutils/microcom.c index 436509c..14b9f3b 100644 --- a/miscutils/microcom.c +++ b/miscutils/microcom.c @@ -11,7 +11,7 @@ //config: bool "microcom (5.6 kb)" //config: default y //config: help -//config: The poor man's minicom utility for chatting with serial port devices. +//config: The poor man's minicom utility for chatting with serial port devices. //applet:IF_MICROCOM(APPLET(microcom, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/mt.c b/miscutils/mt.c index aec7bf7..fad656e 100644 --- a/miscutils/mt.c +++ b/miscutils/mt.c @@ -6,9 +6,9 @@ //config: bool "mt (2.6 kb)" //config: default y //config: help -//config: mt is used to control tape devices. You can use the mt utility -//config: to advance or rewind a tape past a specified number of archive -//config: files on the tape. +//config: mt is used to control tape devices. You can use the mt utility +//config: to advance or rewind a tape past a specified number of archive +//config: files on the tape. //applet:IF_MT(APPLET(mt, BB_DIR_BIN, BB_SUID_DROP)) diff --git a/miscutils/nandwrite.c b/miscutils/nandwrite.c index 8659b49..14b1ed0 100644 --- a/miscutils/nandwrite.c +++ b/miscutils/nandwrite.c @@ -13,14 +13,14 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Write to the specified MTD device, with bad blocks awareness +//config: Write to the specified MTD device, with bad blocks awareness //config: //config:config NANDDUMP //config: bool "nanddump (6.3 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Dump the content of raw NAND chip +//config: Dump the content of raw NAND chip //applet:IF_NANDWRITE(APPLET(nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP)) //applet:IF_NANDDUMP(APPLET_ODDNAME(nanddump, nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP, nanddump)) diff --git a/miscutils/partprobe.c b/miscutils/partprobe.c index 787def8..2c12a7d 100644 --- a/miscutils/partprobe.c +++ b/miscutils/partprobe.c @@ -9,7 +9,7 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Ask kernel to rescan partition table. +//config: Ask kernel to rescan partition table. //applet:IF_PARTPROBE(APPLET(partprobe, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/raidautorun.c b/miscutils/raidautorun.c index 45e398e..ecedf9c 100644 --- a/miscutils/raidautorun.c +++ b/miscutils/raidautorun.c @@ -12,8 +12,8 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: raidautorun tells the kernel md driver to -//config: search and start RAID arrays. +//config: raidautorun tells the kernel md driver to +//config: search and start RAID arrays. //applet:IF_RAIDAUTORUN(APPLET(raidautorun, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/readahead.c b/miscutils/readahead.c index eb966b0..972302a 100644 --- a/miscutils/readahead.c +++ b/miscutils/readahead.c @@ -15,17 +15,17 @@ //config: depends on LFS //config: select PLATFORM_LINUX //config: help -//config: Preload the files listed on the command line into RAM cache so that -//config: subsequent reads on these files will not block on disk I/O. +//config: Preload the files listed on the command line into RAM cache so that +//config: subsequent reads on these files will not block on disk I/O. //config: -//config: This applet just calls the readahead(2) system call on each file. -//config: It is mainly useful in system startup scripts to preload files -//config: or executables before they are used. When used at the right time -//config: (in particular when a CPU bound process is running) it can -//config: significantly speed up system startup. +//config: This applet just calls the readahead(2) system call on each file. +//config: It is mainly useful in system startup scripts to preload files +//config: or executables before they are used. When used at the right time +//config: (in particular when a CPU bound process is running) it can +//config: significantly speed up system startup. //config: -//config: As readahead(2) blocks until each file has been read, it is best to -//config: run this applet as a background job. +//config: As readahead(2) blocks until each file has been read, it is best to +//config: run this applet as a background job. //applet:IF_READAHEAD(APPLET(readahead, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/rfkill.c b/miscutils/rfkill.c index 2c083b1..5469284 100644 --- a/miscutils/rfkill.c +++ b/miscutils/rfkill.c @@ -12,12 +12,12 @@ //config: default n # doesn't build on Ubuntu 9.04 //config: select PLATFORM_LINUX //config: help -//config: Enable/disable wireless devices. +//config: Enable/disable wireless devices. //config: -//config: rfkill list : list all wireless devices -//config: rfkill list bluetooth : list all bluetooth devices -//config: rfkill list 1 : list device corresponding to the given index -//config: rfkill block|unblock wlan : block/unblock all wlan(wifi) devices +//config: rfkill list : list all wireless devices +//config: rfkill list bluetooth : list all bluetooth devices +//config: rfkill list 1 : list device corresponding to the given index +//config: rfkill block|unblock wlan : block/unblock all wlan(wifi) devices //config: //applet:IF_RFKILL(APPLET(rfkill, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/runlevel.c b/miscutils/runlevel.c index 79fa3c8..6b47422 100644 --- a/miscutils/runlevel.c +++ b/miscutils/runlevel.c @@ -16,10 +16,10 @@ //config: default y //config: depends on FEATURE_UTMP //config: help -//config: find the current and previous system runlevel. +//config: find the current and previous system runlevel. //config: -//config: This applet uses utmp but does not rely on busybox supporing -//config: utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. +//config: This applet uses utmp but does not rely on busybox supporing +//config: utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. //applet:IF_RUNLEVEL(APPLET(runlevel, BB_DIR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/rx.c b/miscutils/rx.c index 3cf1784..874a3f0 100644 --- a/miscutils/rx.c +++ b/miscutils/rx.c @@ -19,7 +19,7 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Receive files using the Xmodem protocol. +//config: Receive files using the Xmodem protocol. //applet:IF_RX(APPLET(rx, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/setserial.c b/miscutils/setserial.c index a609502..28a1bef 100644 --- a/miscutils/setserial.c +++ b/miscutils/setserial.c @@ -13,7 +13,7 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Retrieve or set Linux serial port. +//config: Retrieve or set Linux serial port. //applet:IF_SETSERIAL(APPLET(setserial, BB_DIR_BIN, BB_SUID_DROP)) diff --git a/miscutils/strings.c b/miscutils/strings.c index 17c0470..ccb05f6 100644 --- a/miscutils/strings.c +++ b/miscutils/strings.c @@ -10,8 +10,8 @@ //config: bool "strings (4.3 kb)" //config: default y //config: help -//config: strings prints the printable character sequences for each file -//config: specified. +//config: strings prints the printable character sequences for each file +//config: specified. //applet:IF_STRINGS(APPLET(strings, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/time.c b/miscutils/time.c index c443ef9..60fc11f 100644 --- a/miscutils/time.c +++ b/miscutils/time.c @@ -12,9 +12,9 @@ //config: bool "time (7 kb)" //config: default y //config: help -//config: The time command runs the specified program with the given arguments. -//config: When the command finishes, time writes a message to standard output -//config: giving timing statistics about this program run. +//config: The time command runs the specified program with the given arguments. +//config: When the command finishes, time writes a message to standard output +//config: giving timing statistics about this program run. //applet:IF_TIME(APPLET(time, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/ttysize.c b/miscutils/ttysize.c index a2eeb93..7f6a843 100644 --- a/miscutils/ttysize.c +++ b/miscutils/ttysize.c @@ -13,10 +13,10 @@ //config: bool "ttysize (372 bytes)" //config: default y //config: help -//config: A replacement for "stty size". Unlike stty, can report only width, -//config: only height, or both, in any order. It also does not complain on -//config: error, but returns default 80x24. -//config: Usage in shell scripts: width=`ttysize w`. +//config: A replacement for "stty size". Unlike stty, can report only width, +//config: only height, or both, in any order. It also does not complain on +//config: error, but returns default 80x24. +//config: Usage in shell scripts: width=`ttysize w`. //applet:IF_TTYSIZE(APPLET(ttysize, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/ubi_tools.c b/miscutils/ubi_tools.c index 07f9a72..c6ba22a 100644 --- a/miscutils/ubi_tools.c +++ b/miscutils/ubi_tools.c @@ -8,42 +8,42 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Attach MTD device to an UBI device. +//config: Attach MTD device to an UBI device. //config: //config:config UBIDETACH //config: bool "ubidetach (4.6 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Detach MTD device from an UBI device. +//config: Detach MTD device from an UBI device. //config: //config:config UBIMKVOL //config: bool "ubimkvol (5.8 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Create a UBI volume. +//config: Create a UBI volume. //config: //config:config UBIRMVOL //config: bool "ubirmvol (5.2 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Delete a UBI volume. +//config: Delete a UBI volume. //config: //config:config UBIRSVOL //config: bool "ubirsvol (4.6 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Resize a UBI volume. +//config: Resize a UBI volume. //config: //config:config UBIUPDATEVOL //config: bool "ubiupdatevol (5.6 kb)" //config: default y //config: select PLATFORM_LINUX //config: help -//config: Update a UBI volume. +//config: Update a UBI volume. // APPLET_ODDNAME:name main location suid_type help //applet:IF_UBIATTACH( APPLET_ODDNAME(ubiattach, ubi_tools, BB_DIR_USR_SBIN, BB_SUID_DROP, ubiattach)) diff --git a/miscutils/ubirename.c b/miscutils/ubirename.c index 8fb42ee..786c4b9 100644 --- a/miscutils/ubirename.c +++ b/miscutils/ubirename.c @@ -11,7 +11,7 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: Utility to rename UBI volumes +//config: Utility to rename UBI volumes //applet:IF_UBIRENAME(APPLET(ubirename, BB_DIR_USR_SBIN, BB_SUID_DROP)) diff --git a/miscutils/volname.c b/miscutils/volname.c index d80787f..6e6bbaa 100644 --- a/miscutils/volname.c +++ b/miscutils/volname.c @@ -31,7 +31,7 @@ //config: bool "volname (1.7 kb)" //config: default y //config: help -//config: Prints a CD-ROM volume name. +//config: Prints a CD-ROM volume name. //applet:IF_VOLNAME(APPLET(volname, BB_DIR_USR_BIN, BB_SUID_DROP)) diff --git a/miscutils/watchdog.c b/miscutils/watchdog.c index 2ef4997..ec06bcb 100644 --- a/miscutils/watchdog.c +++ b/miscutils/watchdog.c @@ -13,12 +13,12 @@ //config: default y //config: select PLATFORM_LINUX //config: help -//config: The watchdog utility is used with hardware or software watchdog -//config: device drivers. It opens the specified watchdog device special file -//config: and periodically writes a magic character to the device. If the -//config: watchdog applet ever fails to write the magic character within a -//config: certain amount of time, the watchdog device assumes the system has -//config: hung, and will cause the hardware to reboot. +//config: The watchdog utility is used with hardware or software watchdog +//config: device drivers. It opens the specified watchdog device special file +//config: and periodically writes a magic character to the device. If the +//config: watchdog applet ever fails to write the magic character within a +//config: certain amount of time, the watchdog device assumes the system has +//config: hung, and will cause the hardware to reboot. //applet:IF_WATCHDOG(APPLET(watchdog, BB_DIR_SBIN, BB_SUID_DROP)) |