summaryrefslogtreecommitdiff
path: root/miscutils/hdparm.c
diff options
context:
space:
mode:
Diffstat (limited to 'miscutils/hdparm.c')
-rw-r--r--miscutils/hdparm.c2321
1 files changed, 1265 insertions, 1056 deletions
diff --git a/miscutils/hdparm.c b/miscutils/hdparm.c
index abc3f38..017d5bf 100644
--- a/miscutils/hdparm.c
+++ b/miscutils/hdparm.c
@@ -3,7 +3,9 @@
* hdparm implementation for busybox
*
*
- * Copyright (C) [2003] by [Matteo Croce] <3297627799@wind.it>
+ * Copyright (C) [2003] by [Matteo Croce] <pinnolo@tin.it>
+ *
+ * Hacked by Tito <farmatito@tiscali.it> for size optimization.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -25,7 +27,7 @@
* hdparm.c - Command line interface to get/set hard disk parameters
* - by Mark Lord (C) 1994-2002 -- freely distributable
*/
-
+
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
@@ -116,7 +118,7 @@
#define ERASE_TIME 89 /* - ordinary */
#define ENH_ERASE_TIME 90 /* - enhanced */
#define ADV_PWR 91 /* current advanced power management level
- in low byte, 0x40 in high byte. */
+ in low byte, 0x40 in high byte. */
#define PSWD_CODE 92 /* master password revision code */
#define HWRST_RSLT 93 /* hardware reset result */
#define ACOUSTIC 94 /* acoustic mgmt values ( >= ATA-6) */
@@ -144,7 +146,7 @@
#define NOVAL_1 0xffff
/* word 0: gen_config */
-#define NOT_ATA 0x8000
+#define NOT_ATA 0x8000
#define NOT_ATAPI 0x4000 /* (check only if bit 15 == 1) */
#define MEDIA_REMOVABLE 0x0080
#define DRIVE_NOT_REMOVABLE 0x0040 /* bit obsoleted in ATA 6 */
@@ -220,7 +222,7 @@ static const char *ata1_cfg_str[] = { /* word 0 in ATA-1 mode */
/* word 1: number of logical cylinders */
#define LCYLS_MAX 0x3fff /* maximum allowable value */
-/* word 2: specific configureation
+/* word 2: specific configureation
* (a) require SET FEATURES to spin-up
* (b) require spin-up to fully reply to IDENTIFY DEVICE
*/
@@ -309,7 +311,7 @@ static const char *minor_str[] = { /* word 81 value: */
"reserved" /* 0x001f-0xfffe*/
};
#endif
-static const char actual_ver[] = {
+static const char actual_ver[] = {
/* word 81 value: */
0, /* 0x0000 WARNING: */
1, /* 0x0001 WARNING: */
@@ -347,7 +349,7 @@ static const char actual_ver[] = {
#define CMDS_W82 0x77ff /* word 82: defined command locations*/
#define CMDS_W83 0x3fff /* word 83: defined command locations*/
#define CMDS_W84 0x002f /* word 83: defined command locations*/
-#define SUPPORT_48_BIT 0x0400
+#define SUPPORT_48_BIT 0x0400
#define NUM_CMD_FEAT_STR 48
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
@@ -408,7 +410,7 @@ static const char *cmd_feat_str[] = {
/* words 85-87: cmds/feats enabled */
/* use cmd_feat_str[] to display what commands and features have
- * been enabled with words 85-87
+ * been enabled with words 85-87
*/
/* words 89, 90, SECU ERASE TIME */
@@ -427,7 +429,7 @@ static const char *cmd_feat_str[] = {
/* word 127: removable media status notification feature set support */
#define RM_STAT_BITS 0x0003
#define RM_STAT_SUP 0x0001
-
+
/* word 128: security */
#define SECU_ENABLED 0x0002
#define SECU_LEVEL 0x0010
@@ -453,39 +455,174 @@ static const char *secu_str[] = {
#define SIG 0x00ff /* signature location */
#define SIG_VAL 0x00A5 /* signature value */
+#define VERSION "v5.4"
+
+#define TIMING_MB 64
+#define TIMING_BUF_MB 1
+#define TIMING_BUF_BYTES (TIMING_BUF_MB * 1024 * 1024)
+#define TIMING_BUF_COUNT (timing_MB / TIMING_BUF_MB)
+#define BUFCACHE_FACTOR 2
+
+#undef DO_FLUSHCACHE /* under construction: force cache flush on -W0 */
+
+/* Busybox messages and functions */
+
+const char * const bb_msg_shared_mem ="could not %s sharedmem buf";
+const char * const bb_msg_op_not_supp =" operation not supported on %s disks";
+
+static void bb_ioctl(int fd, int request, void *argp, const char *string)
+{
+ if (ioctl (fd, request, argp) != 0)
+ bb_error_msg(" %s", string);
+}
+
+static void if_printf(unsigned long i, char *fmt, ... )
+{
+ va_list ap;
+ va_start(ap, fmt);
+ if (i)
+ vprintf(fmt, ap);
+ va_end(ap);
+}
+
+static void on_off (unsigned int value);
+
+static void if_printf_on_off(unsigned long get_arg,const char *fmt, unsigned long arg)
+{
+ if (get_arg)
+ {
+ printf(fmt, arg);
+ on_off(arg);
+ }
+}
+
+static void bb_ioctl_on_off(int fd, int request, void *argp, const char *string,
+ const char * fmt)
+{
+ if (ioctl (fd, request, &argp) != 0)
+ bb_error_msg(" %s", string);
+ else
+ {
+ printf(fmt, (unsigned long) argp);
+ on_off((unsigned long) argp);
+ }
+}
+static void if_else_printf(unsigned long i, char *fmt1, char *fmt2, ... )
+{
+ va_list ap;
+ va_start(ap, fmt2);
+ if (i)
+ vprintf(fmt1, ap);
+ else
+ vprintf(fmt2, ap);
+ va_end(ap);
+}
+
+static void print_ascii(uint16_t *p, uint8_t length);
+
+static void xprint_ascii(uint16_t *val ,int i, char * string, int n)
+{
+ if(val[i])
+ {
+ printf("\t%-20s",string);
+ print_ascii(&val[i], n);
+ }
+}
+
+static void sync_and_sleep(int i)
+{
+ sync();
+ sleep(i);
+}
+
+static void check_if_min_and_set_val(uint16_t a, uint16_t b)
+{
+ if( a < b)
+ a = b;
+}
+
+static void check_if_maj_and_set_val(uint16_t a, uint16_t b)
+{
+ if( a > b)
+ a = b;
+}
+
+char * check_ptr(char *p, int argc, char **argv)
+{
+ if (!*p && argc && isdigit(**argv))
+ p = *argv++, --argc;
+ return p;
+}
+
+char * check_ptr_v2(char *p, int argc, char **argv)
+{
+ if (!*p && argc && isalnum(**argv))
+ p = *argv++, --argc;
+ return p;
+}
+
+unsigned long int set_flag(char *p, char max)
+{
+ if (*p >= '0' && *p <= max )
+ return 1;
+ return 0;
+}
+
+static void if_strcat(unsigned long test, char *modes, char *string)
+{
+ if (test)
+ strcat(modes,string);
+}
+
+/* end of busybox specific stuff */
+
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
-static uint8_t mode_loop(uint16_t mode_sup, uint16_t mode_sel, int cc, uint8_t *have_mode) {
+static uint8_t mode_loop(uint16_t mode_sup, uint16_t mode_sel, int cc, uint8_t *have_mode)
+{
uint16_t ii;
uint8_t err_dma = 0;
- for(ii = 0; ii <= MODE_MAX; ii++) {
- if(mode_sel & 0x0001) {
+
+ for(ii = 0; ii <= MODE_MAX; ii++)
+ {
+ if(mode_sel & 0x0001)
+ {
printf("*%cdma%u ",cc,ii);
- if(*have_mode) err_dma = 1;
+ if(*have_mode)
+ err_dma = 1;
*have_mode = 1;
- } else if(mode_sup & 0x0001) {
- printf("%cdma%u ",cc,ii);
}
- mode_sup >>=1; mode_sel >>=1;
+ else if(mode_sup & 0x0001)
+ printf("%cdma%u ",cc,ii);
+
+ mode_sup >>=1;
+ mode_sel >>=1;
}
return err_dma;
}
+
static void print_ascii(uint16_t *p, uint8_t length) {
uint8_t ii;
char cl;
/* find first non-space & print it */
- for(ii = 0; ii< length; ii++) {
- if(((char) 0x00ff&((*p)>>8)) != ' ') break;
- if((cl = (char) 0x00ff&(*p)) != ' ') {
- if(cl != '\0') printf("%c",cl);
- p++; ii++;
+ for(ii = 0; ii< length; ii++)
+ {
+ if(((char) 0x00ff&((*p)>>8)) != ' ')
+ break;
+ if((cl = (char) 0x00ff&(*p)) != ' ')
+ {
+ if_printf((cl != '\0'),"%c",cl);
+ p++;
+ ii++;
break;
}
p++;
}
/* print the rest */
- for(; ii< length; ii++) {
- if(!(*p)) break; /* some older devices have NULLs */
+ for(; ii< length; ii++)
+ {
+ if(!(*p))
+ break; /* some older devices have NULLs */
printf("%c%c",(char)0x00ff&((*p)>>8),(char)(*p)&0x00ff);
p++;
}
@@ -499,7 +636,7 @@ static void print_ascii(uint16_t *p, uint8_t length) {
static void identify (uint16_t *id_supplied, const char *devname)
{
- char *id_file = NULL, fmt[]="/proc/ide/%s/identify";
+ char *id_file = NULL;
FILE *fl;
uint16_t val[256], ii, jj, kk;
uint16_t like_std = 1, std = 0, min_std = 0xffff;
@@ -509,29 +646,35 @@ static void identify (uint16_t *id_supplied, const char *devname)
uint32_t ll, mm, nn, oo;
__u64 bbbig; /* (:) */
- if (id_supplied) {
+ if (id_supplied)
+ {
#if __BYTE_ORDER == __BIG_ENDIAN
swab(id_supplied, val, sizeof(val));
#else
memcpy(val, id_supplied, sizeof(val));
#endif
- } else {
- id_file = xcalloc(1, strlen(devname)+1+strlen(fmt));
- sprintf(id_file, fmt, devname);
-
+ }
+ else
+ {
+ id_file = xcalloc(1, strlen(devname)+22);
+ sprintf(id_file, "/proc/ide/%s/identify", devname);
/* open the file, read in all the info and close it */
- if (id_file == NULL) {
+ if (id_file == NULL)
fl = stdin;
- } else if(NULL == (fl = fopen(id_file, "r")))
- bb_perror_msg_and_die(id_file);
+ else
+ fl = bb_xfopen(id_file, "r");
+
/* calculate checksum over all bytes */
- for(ii = GEN_CONFIG; ii<=INTEGRITY; ii++) {
+ for(ii = GEN_CONFIG; ii<=INTEGRITY; ii++)
+ {
unsigned int scratch;
- if(1 != fscanf(fl,"%04x",&scratch)) break;
+ if(1 != fscanf(fl,"%04x",&scratch))
+ break;
val[ii] = (uint16_t)scratch;
chksum += val[ii] + (val[ii] >> 8);
}
- fclose(fl);
+ fclose(fl);
+ /*bb_fclose_nonstdin(fl);*/
if(ii < (INTEGRITY+1))
bb_error_msg_and_die("Input file wrong format or length");
}
@@ -539,358 +682,407 @@ static void identify (uint16_t *id_supplied, const char *devname)
/* check if we recognise the device type */
printf("\n");
- if(!(val[GEN_CONFIG] & NOT_ATA)) {
+ if(!(val[GEN_CONFIG] & NOT_ATA))
+ {
dev = ATA_DEV;
printf("ATA device, with ");
- } else if(val[GEN_CONFIG]==CFA_SUPPORT_VAL) {
+ }
+ else if(val[GEN_CONFIG]==CFA_SUPPORT_VAL)
+ {
dev = ATA_DEV;
like_std = 4;
printf("CompactFlash ATA device, with ");
- } else if(!(val[GEN_CONFIG] & NOT_ATAPI)) {
+ }
+ else if(!(val[GEN_CONFIG] & NOT_ATAPI))
+ {
dev = ATAPI_DEV;
eqpt = (val[GEN_CONFIG] & EQPT_TYPE) >> SHIFT_EQPT;
printf("ATAPI %s, with ", pkt_str[eqpt]);
like_std = 3;
- } else {
- bb_error_msg_and_die("Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n");
}
- if(!(val[GEN_CONFIG] & MEDIA_REMOVABLE))
- printf("non-");
- printf("removable media\n");
+ else
+ /*"Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n"*/
+ bb_error_msg_and_die("Unknown device type");
+ if_printf(!(val[GEN_CONFIG] & MEDIA_REMOVABLE),"non-");
+ printf("removable media\n");
/* Info from the specific configuration word says whether or not the
* ID command completed correctly. It is only defined, however in
- * ATA/ATAPI-5 & 6; it is reserved (value theoretically 0) in prior
+ * ATA/ATAPI-5 & 6; it is reserved (value theoretically 0) in prior
* standards. Since the values allowed for this word are extremely
* specific, it should be safe to check it now, even though we don't
* know yet what standard this device is using.
*/
if((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL) ||
- (val[CONFIG]==PWRD_NID_VAL) || (val[CONFIG]==PWRD_ID_VAL) ) {
- like_std = 5;
- if((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL))
- printf("powers-up in standby; SET FEATURES subcmd spins-up.\n");
- if(((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==PWRD_NID_VAL)) &&
- (val[GEN_CONFIG] & INCOMPLETE))
- printf("\n\tWARNING: ID response incomplete.\n\tWARNING: Following data may be incorrect.\n\n");
+ (val[CONFIG]==PWRD_NID_VAL) || (val[CONFIG]==PWRD_ID_VAL) )
+ {
+ like_std = 5;
+ if_printf(((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL)),
+ "powers-up in standby; SET FEATURES subcmd spins-up.\n");
+ if_printf((((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==PWRD_NID_VAL)) && (val[GEN_CONFIG] & INCOMPLETE)),
+ "\n\tWARNING: ID response incomplete.\n\tFollowing data may be incorrect.\n\n");
}
/* output the model and serial numbers and the fw revision */
- if(val[START_MODEL]) {
- printf("\t%-20s","Model Number:");
- print_ascii(&val[START_MODEL], LENGTH_MODEL);
- }
- if(val[START_SERIAL]) {
- printf("\t%-20s","Serial Number:");
- print_ascii( &val[START_SERIAL], LENGTH_SERIAL);
- }
- if(val[START_FW_REV]) {
- printf("\t%-20s","Firmware Revision:");
- print_ascii(&val[START_FW_REV], LENGTH_FW_REV);
- }
- if(val[START_MEDIA]) {
- printf("\t%-20s","Media Serial Num:");
- print_ascii(&val[START_MEDIA], LENGTH_MEDIA);
- }
- if(val[START_MANUF]) {
- printf("\t%-20s","Media Manufacturer:");
- print_ascii(&val[START_MANUF], LENGTH_MANUF);
- }
+ xprint_ascii(val, START_MODEL, "Model Number:", LENGTH_MODEL);
+ xprint_ascii(val, START_SERIAL, "Serial Number:", LENGTH_SERIAL);
+ xprint_ascii(val, START_FW_REV, "Firmware Revision:", LENGTH_FW_REV);
+ xprint_ascii(val, START_MEDIA, "Media Serial Num:", LENGTH_MEDIA);
+ xprint_ascii(val, START_MANUF, "Media Manufacturer:", LENGTH_MANUF);
/* major & minor standards version number (Note: these words were not
* defined until ATA-3 & the CDROM std uses different words.) */
printf("Standards:");
- if(eqpt != CDROM) {
- if(val[MINOR] && (val[MINOR] <= MINOR_MAX)){
- if(like_std < 3) like_std = 3;
+ if(eqpt != CDROM)
+ {
+ if(val[MINOR] && (val[MINOR] <= MINOR_MAX))
+ {
+ check_if_min_and_set_val( like_std, 3);
std = actual_ver[val[MINOR]];
- if(std) {
- printf("\n\tUsed: ");
- printf("%s ",minor_str[val[MINOR]]);
- }
+ if_printf(std,"\n\tUsed: %s ",minor_str[val[MINOR]]);
+
}
/* looks like when they up-issue the std, they obsolete one;
- * thus, only the newest 4 issues need be supported. (That's
+ * thus, only the newest 4 issues need be supported. (That's
* what "kk" and "min_std" are all about.) */
- if(val[MAJOR] && (val[MAJOR] !=NOVAL_1)) {
+ if(val[MAJOR] && (val[MAJOR] !=NOVAL_1))
+ {
printf("\n\tSupported: ");
jj = val[MAJOR] << 1;
kk = like_std >4 ? like_std-4: 0;
- for(ii = 14; (ii >0)&&(ii>kk); ii--) {
- if(jj & 0x8000) {
+ for(ii = 14; (ii >0)&&(ii>kk); ii--)
+ {
+ if(jj & 0x8000)
+ {
printf("%u ", ii);
- if(like_std < ii) {
+ if(like_std < ii)
+ {
like_std = ii;
kk = like_std >4 ? like_std-4: 0;
}
- if(min_std > ii) min_std = ii;
+ check_if_maj_and_set_val(min_std, ii);
}
jj <<= 1;
}
- if(like_std < 3) like_std = 3;
+ check_if_min_and_set_val( like_std, 3);
}
/* Figure out what standard the device is using if it hasn't told
* us. If we know the std, check if the device is using any of
* the words from the next level up. It happens.
*/
- if(like_std < std) like_std = std;
+ check_if_min_and_set_val( like_std, std);
+
if(((std == 5) || (!std && (like_std < 6))) &&
- ( (((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
- ((val[CMDS_SUPP_1] & CMDS_W83) > 0x00ff)) ||
- (((val[CMDS_SUPP_2] & VALID) == VALID_VAL) &&
- (val[CMDS_SUPP_2] & CMDS_W84) ) ) ) {
+ ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
+ (( val[CMDS_SUPP_1] & CMDS_W83) > 0x00ff)) ||
+ ((( val[CMDS_SUPP_2] & VALID) == VALID_VAL) &&
+ ( val[CMDS_SUPP_2] & CMDS_W84) ) ) )
+ {
like_std = 6;
- } else if(((std == 4) || (!std && (like_std < 5))) &&
- ((((val[INTEGRITY] & SIG) == SIG_VAL) && !chksum) ||
- ((val[HWRST_RSLT] & VALID) == VALID_VAL) ||
- (((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
- ((val[CMDS_SUPP_1] & CMDS_W83) > 0x001f)) ) ) {
+ }
+ else if(((std == 4) || (!std && (like_std < 5))) &&
+ ((((val[INTEGRITY] & SIG) == SIG_VAL) && !chksum) ||
+ (( val[HWRST_RSLT] & VALID) == VALID_VAL) ||
+ ((( val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
+ (( val[CMDS_SUPP_1] & CMDS_W83) > 0x001f)) ) )
+ {
like_std = 5;
- } else if(((std == 3) || (!std && (like_std < 4))) &&
- ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
- (((val[CMDS_SUPP_1] & CMDS_W83) > 0x0000) ||
- ((val[CMDS_SUPP_0] & CMDS_W82) > 0x000f))) ||
- ((val[CAPAB_1] & VALID) == VALID_VAL) ||
- ((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) ||
- ((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) ) ) {
+ }
+ else if(((std == 3) || (!std && (like_std < 4))) &&
+ ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
+ ((( val[CMDS_SUPP_1] & CMDS_W83) > 0x0000) ||
+ (( val[CMDS_SUPP_0] & CMDS_W82) > 0x000f))) ||
+ (( val[CAPAB_1] & VALID) == VALID_VAL) ||
+ (( val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) ||
+ (( val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) ) )
+ {
like_std = 4;
- } else if(((std == 2) || (!std && (like_std < 3))) &&
- ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) ) {
+ }
+ else if(((std == 2) || (!std && (like_std < 3))) &&
+ ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) )
+ {
like_std = 3;
- } else if(((std == 1) || (!std && (like_std < 2))) &&
- ((val[CAPAB_0] & (IORDY_SUP | IORDY_OFF)) ||
- (val[WHATS_VALID] & OK_W64_70)) ) {
+ }
+ else if(((std == 1) || (!std && (like_std < 2))) &&
+ ((val[CAPAB_0] & (IORDY_SUP | IORDY_OFF)) ||
+ (val[WHATS_VALID] & OK_W64_70)) )
+ {
like_std = 2;
}
- if(!std) {
+ if(!std)
printf("\n\tLikely used: %u\n",like_std);
- } else if(like_std > std) {
- printf("& some of %u\n",like_std);
- } else printf("\n");
- } else {
+ else if(like_std > std)
+ printf("& some of %u\n",like_std);
+ else
+ printf("\n");
+ }
+ else
+ {
/* TBD: do CDROM stuff more thoroughly. For now... */
kk = 0;
- if(val[CDR_MINOR] == 9) {
+ if(val[CDR_MINOR] == 9)
+ {
kk = 1;
printf("\n\tUsed: ATAPI for CD-ROMs, SFF-8020i, r2.5");
}
- if(val[CDR_MAJOR] && (val[CDR_MAJOR] !=NOVAL_1)) {
+ if(val[CDR_MAJOR] && (val[CDR_MAJOR] !=NOVAL_1))
+ {
kk = 1;
printf("\n\tSupported: CD-ROM ATAPI");
jj = val[CDR_MAJOR] >> 1;
- for(ii = 1; ii <15; ii++) {
- if(jj & 0x0001) {
- printf("-%u ", ii);
- }
+ for(ii = 1; ii <15; ii++)
+ {
+ if_printf((jj & 0x0001),"-%u ", ii);
jj >>= 1;
}
}
- if(!kk) printf("\n\tLikely used CD-ROM ATAPI-1\n");
- else printf("\n");
+ if_else_printf((!kk),"\n\tLikely used CD-ROM ATAPI-1\n","\n");
/* the cdrom stuff is more like ATA-2 than anything else, so: */
like_std = 2;
}
- if(min_std == 0xffff) min_std = like_std > 4 ? like_std - 3 : 1;
+ if(min_std == 0xffff)
+ min_std = like_std > 4 ? like_std - 3 : 1;
printf("Configuration:\n");
/* more info from the general configuration word */
- if((eqpt != CDROM) && (like_std == 1)) {
+ if((eqpt != CDROM) && (like_std == 1))
+ {
jj = val[GEN_CONFIG] >> 1;
- for(ii = 1; ii < 15; ii++) {
- if(jj & 0x0001) printf("\t%s\n",ata1_cfg_str[ii]);
+ for(ii = 1; ii < 15; ii++)
+ {
+ if_printf((jj & 0x0001),"\t%s\n",ata1_cfg_str[ii]);
jj >>=1;
}
}
- if(dev == ATAPI_DEV) {
+ if(dev == ATAPI_DEV)
+ {
printf("\tDRQ response: "); /* Data Request (DRQ) */
- switch(val[GEN_CONFIG] & DRQ_RESPONSE_TIME) {
- case DRQ_3MS_VAL : printf("3ms.\n"); break;
- case DRQ_INTR_VAL : printf("<=10ms with INTRQ\n"); break;
- case DRQ_50US_VAL : printf("50us.\n"); break;
- default : printf("unknown.\n"); break;
+ switch(val[GEN_CONFIG] & DRQ_RESPONSE_TIME)
+ {
+ case DRQ_3MS_VAL :
+ printf("3ms.\n");
+ break;
+ case DRQ_INTR_VAL :
+ printf("<=10ms with INTRQ\n");
+ break;
+ case DRQ_50US_VAL :
+ printf("50us.\n");
+ break;
+ default :
+ printf("unknown.\n");
+ break;
}
printf("\tPacket size: ");
- switch(val[GEN_CONFIG] & PKT_SIZE_SUPPORTED) {
- case PKT_SIZE_12_VAL : printf("12 bytes\n"); break;
- case PKT_SIZE_16_VAL : printf("16 bytes\n"); break;
- default : printf("Unknown\n"); break;
+ switch(val[GEN_CONFIG] & PKT_SIZE_SUPPORTED)
+ {
+ case PKT_SIZE_12_VAL :
+ printf("12 bytes\n");
+ break;
+ case PKT_SIZE_16_VAL :
+ printf("16 bytes\n");
+ break;
+ default :
+ printf("Unknown\n");
+ break;
}
- } else {
- /* addressing...CHS? See section 6.2 of ATA specs 4 or 5 */
+ }
+ else
+ {
+ /* addressing...CHS? See section 6.2 of ATA specs 4 or 5 */
ll = (uint32_t)val[LBA_SECTS_MSB] << 16 | val[LBA_SECTS_LSB];
mm = 0; bbbig = 0;
- if ( (ll > 0x00FBFC10) && (!val[LCYLS])) {
+ if ( (ll > 0x00FBFC10) && (!val[LCYLS]))
printf("\tCHS addressing not supported\n");
- } else {
+ else
+ {
jj = val[WHATS_VALID] & OK_W54_58;
- printf("\tLogical\t\tmax\tcurrent\n");
- printf("\tcylinders\t%u\t%u\n",val[LCYLS],jj?val[LCYLS_CUR]:0);
- printf("\theads\t\t%u\t%u\n",val[LHEADS],jj?val[LHEADS_CUR]:0);
- printf("\tsectors/track\t%u\t%u\n",val[LSECTS],jj?val[LSECTS_CUR]:0);
- printf("\t--\n");
- if((min_std == 1) && (val[TRACK_BYTES] || val[SECT_BYTES])) {
- printf("\tbytes/track: %u",val[TRACK_BYTES]);
- printf("\tbytes/sector: %u\n",val[SECT_BYTES]);
- }
- if(jj) {
+ printf("\tLogical\t\tmax\tcurrent\n\tcylinders\t%u\t%u\n\theads\t\t%u\t%u\n\tsectors/track\t%u\t%u\n\t--\n",
+ val[LCYLS],jj?val[LCYLS_CUR]:0, val[LHEADS],jj?val[LHEADS_CUR]:0, val[LSECTS],jj?val[LSECTS_CUR]:0);
+
+ if_printf(((min_std == 1) && (val[TRACK_BYTES] || val[SECT_BYTES])),
+ "\tbytes/track: %u\tbytes/sector: %u\n",val[TRACK_BYTES], val[SECT_BYTES]);
+
+ if(jj)
+ {
mm = (uint32_t)val[CAPACITY_MSB] << 16 | val[CAPACITY_LSB];
- if(like_std < 3) { /* check Endian of capacity bytes */
+ if(like_std < 3)
+ {
+ /* check Endian of capacity bytes */
nn = val[LCYLS_CUR] * val[LHEADS_CUR] * val[LSECTS_CUR];
oo = (uint32_t)val[CAPACITY_LSB] << 16 | val[CAPACITY_MSB];
if(abs(mm - nn) > abs(oo - nn))
mm = oo;
}
printf("\tCHS current addressable sectors:%11u\n",mm);
- }
+ }
}
/* LBA addressing */
printf("\tLBA user addressable sectors:%11u\n",ll);
if( ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) &&
- (val[CMDS_SUPP_1] & SUPPORT_48_BIT) ) {
- bbbig = (__u64)val[LBA_64_MSB] << 48 |
- (__u64)val[LBA_48_MSB] << 32 |
- (__u64)val[LBA_MID] << 16 |
- val[LBA_LSB] ;
+ (val[CMDS_SUPP_1] & SUPPORT_48_BIT) )
+ {
+ bbbig = (__u64)val[LBA_64_MSB] << 48 |
+ (__u64)val[LBA_48_MSB] << 32 |
+ (__u64)val[LBA_MID] << 16 |
+ val[LBA_LSB] ;
printf("\tLBA48 user addressable sectors:%11llu\n",bbbig);
}
- if (!bbbig) bbbig = (__u64)(ll>mm ? ll : mm); /* # 512 byte blocks */
+
+ if (!bbbig)
+ bbbig = (__u64)(ll>mm ? ll : mm); /* # 512 byte blocks */
printf("\tdevice size with M = 1024*1024: %11llu MBytes\n",bbbig>>11);
bbbig = (bbbig<<9)/1000000;
printf("\tdevice size with M = 1000*1000: %11llu MBytes ",bbbig);
- if(bbbig > 1000) printf("(%llu GB)\n",bbbig/1000);
- else printf("\n");
+
+ if_else_printf((bbbig > 1000),"(%llu GB)\n","\n",bbbig/1000);
}
/* hw support of commands (capabilities) */
- printf("Capabilities:\n");
- printf("\t");
- if(dev == ATAPI_DEV) {
- if(eqpt != CDROM) {
- if(val[CAPAB_0] & CMD_Q_SUP) printf("Cmd queuing, ");
- }
- if(val[CAPAB_0] & OVLP_SUP) printf("Cmd overlap, ");
+ printf("Capabilities:\n\t");
+
+ if(dev == ATAPI_DEV)
+ {
+ if(eqpt != CDROM)
+ if_printf((val[CAPAB_0] & CMD_Q_SUP),"Cmd queuing, ");
+
+ if_printf((val[CAPAB_0] & OVLP_SUP),"Cmd overlap, ");
}
- if(val[CAPAB_0] & LBA_SUP) printf("LBA, ");
- if(like_std != 1) {
+ if_printf((val[CAPAB_0] & LBA_SUP),"LBA, ");
+
+ if(like_std != 1)
+ {
printf("IORDY");
- if(!(val[CAPAB_0] & IORDY_SUP)) printf("(may be)");
- if(val[CAPAB_0] & IORDY_OFF) printf("(can");
- else printf("(cannot");
- printf(" be disabled)");
- } else printf("no IORDY");
- printf("\n");
- if((like_std == 1) && val[BUF_TYPE]) {
+ if_printf((!(val[CAPAB_0] & IORDY_SUP)),"(may be)");
+ if_else_printf((val[CAPAB_0] & IORDY_OFF),"(can","(cannot");
+ printf(" be disabled)\n");
+ }
+ else
+ printf("no IORDY\n");
+
+ if((like_std == 1) && val[BUF_TYPE])
+ {
kk = val[BUF_TYPE];
printf("\tBuffer type: %04x: ",kk);
- if (kk < 2) printf("single port, single-sector");
- else printf("dual port, multi-sector");
- if (kk > 2) printf(" with read caching ability");
+ if_else_printf((kk < 2),"single port, single-sector","dual port, multi-sector");
+ if_printf((kk > 2)," with read caching ability");
printf("\n");
}
jj = 0;
- if((min_std == 1) && (val[BUFFER__SIZE] && (val[BUFFER__SIZE] != NOVAL_1))) {
+ if((min_std == 1) && (val[BUFFER__SIZE] && (val[BUFFER__SIZE] != NOVAL_1)))
+ {
printf("\tBuffer size: %.1fkB",(float)val[BUFFER__SIZE]/2);
jj = 1;
}
- if((min_std < 4) && (val[RW_LONG])) {
+ if((min_std < 4) && (val[RW_LONG]))
+ {
printf("\tbytes avail on r/w long: %u",val[RW_LONG]);
jj = 1;
}
- if((eqpt != CDROM) && (like_std > 3)) {
+ if((eqpt != CDROM) && (like_std > 3))
+ {
printf("\tQueue depth: %u",(val[QUEUE_DEPTH] & DEPTH_BITS)+1);
jj = 1;
}
- if(jj) printf("\n");
- if(dev == ATA_DEV) {
- if(like_std == 1) {
- printf("\tCan");
- if(!val[DWORD_IO]) printf("not");
- printf(" perform double-word IO\n");
- } else {
+ if_printf(jj,"\n");
+
+ if(dev == ATA_DEV)
+ {
+ if(like_std == 1)
+ printf("\tCan%s perform double-word IO\n",(!val[DWORD_IO]) ?"not":"");
+ else
+ {
printf("\tStandby timer values: spec'd by ");
- if(val[CAPAB_0] & STD_STBY) printf("Standard");
- else printf("Vendor");
- if((like_std > 3) && ((val[CAPAB_1] & VALID) == VALID_VAL)) {
- if(val[CAPAB_1] & MIN_STANDBY_TIMER) printf(", with ");
- else printf(", no ");
- printf("device specific minimum\n");
- } else printf("\n");
+ if_else_printf((val[CAPAB_0] & STD_STBY),"Standard","Vendor");
+ if((like_std > 3) && ((val[CAPAB_1] & VALID) == VALID_VAL))
+ printf(", %s device specific minimum\n",(val[CAPAB_1] & MIN_STANDBY_TIMER)?"with":"no");
+ else
+ printf("\n");
}
printf("\tR/W multiple sector transfer: ");
- if((like_std < 3) && !(val[SECTOR_XFER_MAX] & SECTOR_XFER)) {
+ if((like_std < 3) && !(val[SECTOR_XFER_MAX] & SECTOR_XFER))
printf("not supported\n");
- } else {
- printf("Max = %u\t",val[SECTOR_XFER_MAX] & SECTOR_XFER);
- printf("Current = ");
- if(val[SECTOR_XFER_CUR] & MULTIPLE_SETTING_VALID)
- printf("%u\n",val[SECTOR_XFER_CUR] & SECTOR_XFER);
- else printf("?\n");
+ else
+ {
+ printf("Max = %u\tCurrent = ",val[SECTOR_XFER_MAX] & SECTOR_XFER);
+ if_else_printf((val[SECTOR_XFER_CUR] & MULTIPLE_SETTING_VALID),
+ "%u\n","?\n",val[SECTOR_XFER_CUR] & SECTOR_XFER);
}
- if((like_std > 3) && (val[CMDS_SUPP_1] & 0x0008)) {
+ if((like_std > 3) && (val[CMDS_SUPP_1] & 0x0008))
+ {
/* We print out elsewhere whether the APM feature is enabled or
not. If it's not enabled, let's not repeat the info; just print
nothing here. */
- printf("\tAdvanced power management level: ");
- if ( (val[ADV_PWR] & 0xFF00) == 0x4000 ) {
+ printf("\tAdvancedPM level: ");
+ if ( (val[ADV_PWR] & 0xFF00) == 0x4000 )
+ {
uint8_t apm_level = val[ADV_PWR] & 0x00FF;
-
printf("%u (0x%x)\n", apm_level, apm_level);
- } else {
- printf("unknown setting (0x%04x)\n", val[ADV_PWR]);
- }
- }
- if(like_std > 5) {
- if(val[ACOUSTIC]) {
- printf("\tRecommended acoustic management value: %u, current value: %u\n", (val[ACOUSTIC] >> 8) & 0x00ff, val[ACOUSTIC] & 0x00ff);
}
+ else
+ printf("unknown setting (0x%04x)\n", val[ADV_PWR]);
}
- } else { /* ATAPI */
- if(eqpt != CDROM) {
- if(val[CAPAB_0] & SWRST_REQ) printf("\tATA sw reset required\n");
+ if(like_std > 5)
+ {
+ if_printf(val[ACOUSTIC],"\tRecommended acoustic management value: %u, current value: %u\n",
+ (val[ACOUSTIC] >> 8) & 0x00ff, val[ACOUSTIC] & 0x00ff);
}
- if(val[PKT_REL] || val[SVC_NBSY]) {
+ }
+ else
+ {
+ /* ATAPI */
+ if(eqpt != CDROM)
+ if_printf((val[CAPAB_0] & SWRST_REQ),"\tATA sw reset required\n");
+
+ if(val[PKT_REL] || val[SVC_NBSY])
+ {
printf("\tOverlap support:");
- if(val[PKT_REL]) printf(" %uus to release bus.",val[PKT_REL]);
- if(val[SVC_NBSY]) printf(" %uus to clear BSY after SERVICE cmd.",val[SVC_NBSY]);
+ if_printf(val[PKT_REL]," %uus to release bus.",val[PKT_REL]);
+ if_printf(val[SVC_NBSY]," %uus to clear BSY after SERVICE cmd.",val[SVC_NBSY]);
printf("\n");
}
}
/* DMA stuff. Check that only one DMA mode is selected. */
printf("\tDMA: ");
- if(!(val[CAPAB_0] & DMA_SUP)) {
+ if(!(val[CAPAB_0] & DMA_SUP))
printf("not supported\n");
- } else {
- if(val[DMA_MODE] && !val[SINGLE_DMA] && !val[MULTI_DMA])
- printf(" sdma%u\n",(val[DMA_MODE] & MODE) >> 8);
- if(val[SINGLE_DMA]) {
- jj = val[SINGLE_DMA]; kk = val[SINGLE_DMA] >> 8;
+ else
+ {
+ if_printf((val[DMA_MODE] && !val[SINGLE_DMA] && !val[MULTI_DMA]),
+ " sdma%u\n",(val[DMA_MODE] & MODE) >> 8);
+ if(val[SINGLE_DMA])
+ {
+ jj = val[SINGLE_DMA];
+ kk = val[SINGLE_DMA] >> 8;
err_dma += mode_loop(jj,kk,'s',&have_mode);
}
- if(val[MULTI_DMA]) {
- jj = val[MULTI_DMA]; kk = val[MULTI_DMA] >> 8;
+ if(val[MULTI_DMA])
+ {
+ jj = val[MULTI_DMA];
+ kk = val[MULTI_DMA] >> 8;
err_dma += mode_loop(jj,kk,'m',&have_mode);
}
- if((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) {
- jj = val[ULTRA_DMA]; kk = val[ULTRA_DMA] >> 8;
+ if((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA])
+ {
+ jj = val[ULTRA_DMA];
+ kk = val[ULTRA_DMA] >> 8;
err_dma += mode_loop(jj,kk,'u',&have_mode);
}
- if(err_dma || !have_mode) printf("(?)");
+ if_printf((err_dma || !have_mode),"(?)");
printf("\n");
- if((dev == ATAPI_DEV) && (eqpt != CDROM) && (val[CAPAB_0] & DMA_IL_SUP))
- printf("\t Interleaved DMA support\n");
+ if_printf(((dev == ATAPI_DEV) && (eqpt != CDROM) && (val[CAPAB_0] & DMA_IL_SUP)),
+ "\t Interleaved DMA support\n");
if((val[WHATS_VALID] & OK_W64_70) &&
- (val[DMA_TIME_MIN] || val[DMA_TIME_NORM])) {
+ (val[DMA_TIME_MIN] || val[DMA_TIME_NORM]))
+ {
printf("\t Cycle time:");
- if(val[DMA_TIME_MIN])
- printf(" min=%uns",val[DMA_TIME_MIN]);
- if(val[DMA_TIME_NORM])
- printf(" recommended=%uns",val[DMA_TIME_NORM]);
+ if_printf(val[DMA_TIME_MIN]," min=%uns",val[DMA_TIME_MIN]);
+ if_printf(val[DMA_TIME_NORM]," recommended=%uns",val[DMA_TIME_NORM]);
printf("\n");
}
}
@@ -899,98 +1091,115 @@ static void identify (uint16_t *id_supplied, const char *devname)
printf("\tPIO: ");
/* If a drive supports mode n (e.g. 3), it also supports all modes less
* than n (e.g. 3, 2, 1 and 0). Print all the modes. */
- if((val[WHATS_VALID] & OK_W64_70) && (val[ADV_PIO_MODES] & PIO_SUP)) {
+ if((val[WHATS_VALID] & OK_W64_70) && (val[ADV_PIO_MODES] & PIO_SUP))
+ {
jj = ((val[ADV_PIO_MODES] & PIO_SUP) << 3) | 0x0007;
- for(ii = 0; ii <= PIO_MODE_MAX ; ii++) {
- if(jj & 0x0001)
- printf("pio%d ",ii);
+ for(ii = 0; ii <= PIO_MODE_MAX ; ii++)
+ {
+ if_printf((jj & 0x0001),"pio%d ",ii);
jj >>=1;
}
printf("\n");
- } else if(((min_std < 5) || (eqpt == CDROM)) && (val[PIO_MODE] & MODE) ) {
- for(ii = 0; ii <= val[PIO_MODE]>>8; ii++) {
+ }
+ else if(((min_std < 5) || (eqpt == CDROM)) && (val[PIO_MODE] & MODE) )
+ {
+ for(ii = 0; ii <= val[PIO_MODE]>>8; ii++)
printf("pio%d ",ii);
- }
printf("\n");
- } else printf("unknown\n");
- if(val[WHATS_VALID] & OK_W64_70) {
- if(val[PIO_NO_FLOW] || val[PIO_FLOW]) {
+ }
+ else
+ printf("unknown\n");
+
+ if(val[WHATS_VALID] & OK_W64_70)
+ {
+ if(val[PIO_NO_FLOW] || val[PIO_FLOW])
+ {
printf("\t Cycle time:");
- if(val[PIO_NO_FLOW])
- printf(" no flow control=%uns", val[PIO_NO_FLOW]);
- if(val[PIO_FLOW])
- printf(" IORDY flow control=%uns", val[PIO_FLOW]);
+ if_printf(val[PIO_NO_FLOW]," no flow control=%uns", val[PIO_NO_FLOW]);
+ if_printf(val[PIO_FLOW]," IORDY flow control=%uns", val[PIO_FLOW]);
printf("\n");
}
}
- if((val[CMDS_SUPP_1] & VALID) == VALID_VAL){
+ if((val[CMDS_SUPP_1] & VALID) == VALID_VAL)
+ {
printf("Commands/features:\n\tEnabled\tSupported:\n");
jj = val[CMDS_SUPP_0];
kk = val[CMDS_EN_0];
- for(ii = 0; ii < NUM_CMD_FEAT_STR; ii++) {
- if((jj & 0x8000) && (*cmd_feat_str[ii] != '\0')) {
- if(kk & 0x8000) printf("\t *");
- else printf("\t");
+ for(ii = 0; ii < NUM_CMD_FEAT_STR; ii++)
+ {
+ if((jj & 0x8000) && (*cmd_feat_str[ii] != '\0'))
+ {
+ if_else_printf((kk & 0x8000),"\t *","\t");
printf("\t%s\n",cmd_feat_str[ii]);
}
jj <<=1; kk<<=1;
- if(ii%16 == 15) {
+ if(ii%16 == 15)
+ {
jj = val[CMDS_SUPP_0+1+(ii/16)];
kk = val[CMDS_EN_0+1+(ii/16)];
}
- if(ii == 31) {
- if((val[CMDS_SUPP_2] & VALID) != VALID_VAL) ii +=16;
+ if(ii == 31)
+ {
+ if((val[CMDS_SUPP_2] & VALID) != VALID_VAL)
+ ii +=16;
}
}
}
- if((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP)
- printf("\tRemovable Media Status Notification feature set supported\n");
-
-
+ if_printf(((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP),
+ "\tRemovable Media Status Notification feature set supported\n");
+
+
/* security */
- if((eqpt != CDROM) && (like_std > 3) &&
- (val[SECU_STATUS] || val[ERASE_TIME] || val[ENH_ERASE_TIME])) {
+ if((eqpt != CDROM) && (like_std > 3) &&
+ (val[SECU_STATUS] || val[ERASE_TIME] || val[ENH_ERASE_TIME]))
+ {
printf("Security: \n");
- if(val[PSWD_CODE] && (val[PSWD_CODE] != NOVAL_1))
- printf("\tMaster password revision code = %u\n",val[PSWD_CODE]);
+ if_printf((val[PSWD_CODE] && (val[PSWD_CODE] != NOVAL_1)),
+ "\tMaster password revision code = %u\n",val[PSWD_CODE]);
jj = val[SECU_STATUS];
- if(jj) {
- for(ii = 0; ii < NUM_SECU_STR; ii++) {
- if(!(jj & 0x0001)) printf("\tnot\t");
- else printf("\t\t");
- printf("%s\n",secu_str[ii]);
+ if(jj)
+ {
+ for(ii = 0; ii < NUM_SECU_STR; ii++)
+ {
+ if_else_printf((!(jj & 0x0001)),"\tnot\t%s\n", "\t\t%s\n", secu_str[ii]);
jj >>=1;
}
- if(val[SECU_STATUS] & SECU_ENABLED) {
+ if(val[SECU_STATUS] & SECU_ENABLED)
+ {
printf("\tSecurity level ");
- if(val[SECU_STATUS] & SECU_LEVEL) printf("maximum\n");
- else printf("high\n");
+ if_else_printf((val[SECU_STATUS] & SECU_LEVEL),"maximum\n","high\n");
}
}
jj = val[ERASE_TIME] & ERASE_BITS;
kk = val[ENH_ERASE_TIME] & ERASE_BITS;
- if(jj || kk) {
+ if(jj || kk)
+ {
printf("\t");
- if(jj) printf("%umin for SECURITY ERASE UNIT. ", jj==ERASE_BITS ? 508 : jj<<1);
- if(kk) printf("%umin for ENHANCED SECURITY ERASE UNIT.", kk==ERASE_BITS ? 508 : kk<<1);
+ if_printf(jj,"%umin for SECURITY ERASE UNIT. ", jj==ERASE_BITS ? 508 : jj<<1);
+ if_printf(kk,"%umin for ENHANCED SECURITY ERASE UNIT.", kk==ERASE_BITS ? 508 : kk<<1);
printf("\n");
}
}
/* reset result */
- if((val[HWRST_RSLT] & VALID) == VALID_VAL) {
+ if((val[HWRST_RSLT] & VALID) == VALID_VAL)
+ {
printf("HW reset results:\n");
- if(val[HWRST_RSLT] & CBLID) printf("\tCBLID- above Vih\n");
- else printf("\tCBLID- below Vih\n");
- if(val[HWRST_RSLT] & RST0) {
+ if_else_printf((val[HWRST_RSLT] & CBLID),"\tCBLID- above Vih\n","\tCBLID- below Vih\n");
+
+ if(val[HWRST_RSLT] & RST0)
+ {
printf("\tDevice num = 0");
jj = val[HWRST_RSLT];
- } else {
+ }
+ else
+ {
printf("\tDevice num = 1");
jj = val[HWRST_RSLT] >> 8;
}
- if((jj & DEV_DET) == JUMPER_VAL)
+
+ if((jj & DEV_DET) == JUMPER_VAL)
printf(" determined by the jumper");
else if((jj & DEV_DET) == CSEL_VAL)
printf(" determined by CSEL");
@@ -998,21 +1207,22 @@ static void identify (uint16_t *id_supplied, const char *devname)
}
/* more stuff from std 5 */
- if((like_std > 4) && (eqpt != CDROM)) {
- if(val[CFA_PWR_MODE] & VALID_W160) {
+ if((like_std > 4) && (eqpt != CDROM))
+ {
+ if(val[CFA_PWR_MODE] & VALID_W160)
+ {
printf("CFA power mode 1:\n\t");
- if(val[CFA_PWR_MODE] & PWR_MODE_OFF) printf("dis");
- else printf("en");
- printf("abled");
- if(val[CFA_PWR_MODE] & PWR_MODE_REQ)
- printf(" and required by some commands");
+ if_else_printf((val[CFA_PWR_MODE] & PWR_MODE_OFF),"disabled","enabled");
+
+ if_printf((val[CFA_PWR_MODE] & PWR_MODE_REQ)," and required by some commands");
printf("\n");
- if(val[CFA_PWR_MODE] & MAX_AMPS)
- printf("\tMaximum current = %uma\n",val[CFA_PWR_MODE] & MAX_AMPS);
+
+ if_printf((val[CFA_PWR_MODE] & MAX_AMPS),"\tMaximum current = %uma\n",val[CFA_PWR_MODE] & MAX_AMPS);
}
- if((val[INTEGRITY] & SIG) == SIG_VAL) {
+ if((val[INTEGRITY] & SIG) == SIG_VAL)
+ {
printf("Checksum: ");
- if(chksum) printf("in");
+ if_printf(chksum,"in");
printf("correct\n");
}
}
@@ -1021,23 +1231,13 @@ static void identify (uint16_t *id_supplied, const char *devname)
}
#endif
-#define VERSION "v5.4"
-
-#define TIMING_MB 64
-#define TIMING_BUF_MB 1
-#define TIMING_BUF_BYTES (TIMING_BUF_MB * 1024 * 1024)
-#define TIMING_BUF_COUNT (timing_MB / TIMING_BUF_MB)
-#define BUFCACHE_FACTOR 2
-
-#undef DO_FLUSHCACHE /* under construction: force cache flush on -W0 */
-
static int verbose = 0, get_identity = 0, get_geom = 0, noisy = 1, quiet = 0;
static int flagcount = 0, do_flush = 0, is_scsi_hd = 0, is_xt_hd = 0;
static int do_ctimings, do_timings = 0;
-static unsigned long set_readahead= 0, get_readahead= 0, readahead= 0;
+static unsigned long set_readahead= 0, get_readahead= 0, readahead= 0;
static unsigned long set_readonly = 0, get_readonly = 0, readonly = 0;
-static unsigned long set_unmask = 0, get_unmask = 0, unmask = 0;
+static unsigned long set_unmask = 0, get_unmask = 0, unmask = 0;
static unsigned long set_mult = 0, get_mult = 0, mult = 0;
#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
static unsigned long set_dma = 0, get_dma = 0, dma = 0;
@@ -1110,16 +1310,6 @@ static const char *cfg_str[] =
static const char *BuffType[] = {"unknown", "1Sect", "DualPort", "DualPortCache"};
-#define YN(b) (((b)==0)?"no":"yes")
-
-static void dmpstr (const char *prefix, unsigned int i, const char *s[], unsigned int maxi)
-{
- if (i > maxi)
- printf("%s%u", prefix, i);
- else
- printf("%s%s", prefix, s[i]);
-}
-
static void dump_identity (const struct hd_driveid *id)
{
int i;
@@ -1127,20 +1317,23 @@ static void dump_identity (const struct hd_driveid *id)
const unsigned short int *id_regs= (const void*) id;
unsigned long capacity;
- printf("\n Model=%.40s, FwRev=%.8s, SerialNo=%.20s",
- id->model, id->fw_rev, id->serial_no);
- printf("\n Config={");
- for (i=0; i<=15; i++) {
- if (id->config & (1<<i))
- printf("%s", cfg_str[i]);
- }
- printf(" }\n");
- printf(" RawCHS=%u/%u/%u, TrkSize=%u, SectSize=%u, ECCbytes=%u\n",
- id->cyls, id->heads, id->sectors,
- id->track_bytes, id->sector_bytes, id->ecc_bytes);
- dmpstr(" BuffType=",id->buf_type,BuffType,3);
+ printf("\n Model=%.40s, FwRev=%.8s, SerialNo=%.20s\n Config={",
+ id->model, id->fw_rev, id->serial_no);
+ for (i=0; i<=15; i++)
+ if_printf((id->config & (1<<i)),"%s", cfg_str[i]);
+
+ printf(" }\n RawCHS=%u/%u/%u, TrkSize=%u, SectSize=%u, ECCbytes=%u\n",
+ id->cyls, id->heads, id->sectors, id->track_bytes,
+ id->sector_bytes, id->ecc_bytes);
+
+ if (id->buf_type > 3)
+ printf("%s%u", " BuffType=", id->buf_type);
+ else
+ printf("%s%s", " BuffType=", BuffType[id->buf_type]);
+
printf(", BuffSize=%ukB, MaxMultSect=%u", id->buf_size/2, id->max_multsect);
- if (id->max_multsect) {
+ if (id->max_multsect)
+ {
printf(", MultSect=");
if (!(id->multsect_valid&1))
printf("?%u?", id->multsect);
@@ -1149,42 +1342,46 @@ static void dump_identity (const struct hd_driveid *id)
else
printf("off");
}
- putchar('\n');
- if (id->tPIO <= 5) {
+ printf("\n");
+ if (id->tPIO <= 5)
+ {
strcat(pmodes, "pio0 ");
- if (id->tPIO >= 1) strcat(pmodes, "pio1 ");
- if (id->tPIO >= 2) strcat(pmodes, "pio2 ");
+ if_strcat((id->tPIO >= 1), pmodes, "pio1 ");
+ if_strcat((id->tPIO >= 2), pmodes, "pio2 ");
+
}
- if (!(id->field_valid&1))
- printf(" (maybe):");
+ if_printf((!(id->field_valid&1))," (maybe):");
#if __BYTE_ORDER == __BIG_ENDIAN
capacity = (id->cur_capacity0 << 16) | id->cur_capacity1;
#else
capacity = (id->cur_capacity1 << 16) | id->cur_capacity0;
#endif
- printf(" CurCHS=%u/%u/%u, CurSects=%lu", id->cur_cyls, id->cur_heads, id->cur_sectors, capacity);
- printf(", LBA=%s", YN(id->capability&2));
- if (id->capability&2)
- printf(", LBAsects=%u", id->lba_capacity);
-
- if (id->capability&1) {
- if (id->dma_1word | id->dma_mword) {
- if (id->dma_1word & 0x100) strcat(dmodes,"*");
- if (id->dma_1word & 1) strcat(dmodes,"sdma0 ");
- if (id->dma_1word & 0x200) strcat(dmodes,"*");
- if (id->dma_1word & 2) strcat(dmodes,"sdma1 ");
- if (id->dma_1word & 0x400) strcat(dmodes,"*");
- if (id->dma_1word & 4) strcat(dmodes,"sdma2 ");
- if (id->dma_1word & 0xf800) strcat(dmodes,"*");
- if (id->dma_1word & 0xf8) strcat(dmodes,"sdma? ");
- if (id->dma_mword & 0x100) strcat(dmodes,"*");
- if (id->dma_mword & 1) strcat(dmodes,"mdma0 ");
- if (id->dma_mword & 0x200) strcat(dmodes,"*");
- if (id->dma_mword & 2) strcat(dmodes,"mdma1 ");
- if (id->dma_mword & 0x400) strcat(dmodes,"*");
- if (id->dma_mword & 4) strcat(dmodes,"mdma2 ");
- if (id->dma_mword & 0xf800) strcat(dmodes,"*");
- if (id->dma_mword & 0xf8) strcat(dmodes,"mdma? ");
+ printf(" CurCHS=%u/%u/%u, CurSects=%lu, LBA=%s",id->cur_cyls, id->cur_heads,
+ id->cur_sectors, capacity ,
+ ((id->capability&2)==0)?"no":"yes");
+
+ if_printf((id->capability&2),", LBAsects=%u", id->lba_capacity);
+
+ if (id->capability&1)
+ {
+ if (id->dma_1word | id->dma_mword)
+ {
+ if_strcat((id->dma_1word & 0x100), dmodes, "*");
+ if_strcat((id->dma_1word & 1), dmodes, "sdma0 ");
+ if_strcat((id->dma_1word & 0x200), dmodes, "*");
+ if_strcat((id->dma_1word & 2), dmodes, "sdma1 ");
+ if_strcat((id->dma_1word & 0x400), dmodes, "*");
+ if_strcat((id->dma_1word & 4), dmodes, "sdma2 ");
+ if_strcat((id->dma_1word & 0xf800), dmodes, "*");
+ if_strcat((id->dma_1word & 0xf8), dmodes, "sdma? ");
+ if_strcat((id->dma_mword & 0x100), dmodes, "*");
+ if_strcat((id->dma_mword & 1), dmodes, "mdma0 ");
+ if_strcat((id->dma_mword & 0x200), dmodes, "*");
+ if_strcat((id->dma_mword & 2), dmodes, "mdma1 ");
+ if_strcat((id->dma_mword & 0x400), dmodes, "*");
+ if_strcat((id->dma_mword & 4), dmodes, "mdma2 ");
+ if_strcat((id->dma_mword & 0xf800), dmodes, "*");
+ if_strcat((id->dma_mword & 0xf8), dmodes, "mdma? ");
}
}
printf("\n IORDY=");
@@ -1192,116 +1389,117 @@ static void dump_identity (const struct hd_driveid *id)
printf((id->capability&4) ? "on/off" : "yes");
else
printf("no");
- if ((id->capability&8) || (id->field_valid&2)) {
- if (id->field_valid&2) {
+
+ if ((id->capability&8) || (id->field_valid&2))
+ {
+ if (id->field_valid&2)
+ {
printf(", tPIO={min:%u,w/IORDY:%u}", id->eide_pio, id->eide_pio_iordy);
- if (id->eide_pio_modes & 1) strcat(pmodes, "pio3 ");
- if (id->eide_pio_modes & 2) strcat(pmodes, "pio4 ");
- if (id->eide_pio_modes &~3) strcat(pmodes, "pio? ");
- }
- if (id->field_valid&4) {
- if (id->dma_ultra & 0x100) strcat(umodes,"*");
- if (id->dma_ultra & 0x001) strcat(umodes,"udma0 ");
- if (id->dma_ultra & 0x200) strcat(umodes,"*");
- if (id->dma_ultra & 0x002) strcat(umodes,"udma1 ");
- if (id->dma_ultra & 0x400) strcat(umodes,"*");
- if (id->dma_ultra & 0x004) strcat(umodes,"udma2 ");
+ if_strcat((id->eide_pio_modes & 1), pmodes, "pio3 ");
+ if_strcat((id->eide_pio_modes & 2), pmodes, "pio4 ");
+ if_strcat((id->eide_pio_modes &~3), pmodes, "pio? ");
+ }
+ if (id->field_valid&4)
+ {
+ if_strcat((id->dma_ultra & 0x100),umodes,"*");
+ if_strcat((id->dma_ultra & 0x001),umodes,"udma0 ");
+ if_strcat((id->dma_ultra & 0x200),umodes,"*");
+ if_strcat((id->dma_ultra & 0x002),umodes,"udma1 ");
+ if_strcat((id->dma_ultra & 0x400),umodes,"*");
+ if_strcat((id->dma_ultra & 0x004),umodes,"udma2 ");
#ifdef __NEW_HD_DRIVE_ID
- if (id->hw_config & 0x2000) {
+ if (id->hw_config & 0x2000)
+ {
#else /* !__NEW_HD_DRIVE_ID */
- if (id->word93 & 0x2000) {
+ if (id->word93 & 0x2000)
+ {
#endif /* __NEW_HD_DRIVE_ID */
- if (id->dma_ultra & 0x0800) strcat(umodes,"*");
- if (id->dma_ultra & 0x0008) strcat(umodes,"udma3 ");
- if (id->dma_ultra & 0x1000) strcat(umodes,"*");
- if (id->dma_ultra & 0x0010) strcat(umodes,"udma4 ");
- if (id->dma_ultra & 0x2000) strcat(umodes,"*");
- if (id->dma_ultra & 0x0020) strcat(umodes,"udma5 ");
- if (id->dma_ultra & 0x4000) strcat(umodes,"*");
- if (id->dma_ultra & 0x0040) strcat(umodes,"udma6 ");
- if (id->dma_ultra & 0x8000) strcat(umodes,"*");
- if (id->dma_ultra & 0x0080) strcat(umodes,"udma7 ");
+ if_strcat((id->dma_ultra & 0x0800),umodes,"*");
+ if_strcat((id->dma_ultra & 0x0008),umodes,"udma3 ");
+ if_strcat((id->dma_ultra & 0x1000),umodes,"*");
+ if_strcat((id->dma_ultra & 0x0010),umodes,"udma4 ");
+ if_strcat((id->dma_ultra & 0x2000),umodes,"*");
+ if_strcat((id->dma_ultra & 0x0020),umodes,"udma5 ");
+ if_strcat((id->dma_ultra & 0x4000),umodes,"*");
+ if_strcat((id->dma_ultra & 0x0040),umodes,"udma6 ");
+ if_strcat((id->dma_ultra & 0x8000),umodes,"*");
+ if_strcat((id->dma_ultra & 0x0080),umodes,"udma7 ");
}
}
}
- if ((id->capability&1) && (id->field_valid&2))
- printf(", tDMA={min:%u,rec:%u}", id->eide_dma_min, id->eide_dma_time);
+ if_printf(((id->capability&1) && (id->field_valid&2)),
+ ", tDMA={min:%u,rec:%u}", id->eide_dma_min, id->eide_dma_time);
printf("\n PIO modes: %s", pmodes);
- if (*dmodes)
- printf("\n DMA modes: %s", dmodes);
- if (*umodes)
- printf("\n UDMA modes: %s", umodes);
-
- printf("\n AdvancedPM=%s",YN(id_regs[83]&8));
- if (id_regs[83] & 8) {
- if (!(id_regs[86]&8))
- printf(": disabled (255)");
- else if ((id_regs[91]&0xFF00)!=0x4000)
- printf(": unknown setting");
- else
- printf(": mode=0x%02X (%u)",id_regs[91]&0xFF,id_regs[91]&0xFF);
- }
- if (id_regs[82]&0x20)
- printf(" WriteCache=%s",(id_regs[85]&0x20) ? "enabled" : "disabled");
+ if_printf((*dmodes),"\n DMA modes: %s", dmodes);
+ if_printf((*umodes),"\n UDMA modes: %s", umodes);
+
+ printf("\n AdvancedPM=%s",((id_regs[83]&8)==0)?"no":"yes");
+ if (id_regs[83] & 8)
+ {
+ if (!(id_regs[86]&8))
+ printf(": disabled (255)");
+ else if ((id_regs[91]&0xFF00)!=0x4000)
+ printf(": unknown setting");
+ else
+ printf(": mode=0x%02X (%u)",id_regs[91]&0xFF,id_regs[91]&0xFF);
+ }
+ if_printf( (id_regs[82]&0x20)," WriteCache=%s",(id_regs[85]&0x20) ? "enabled" : "disabled");
#ifdef __NEW_HD_DRIVE_ID
- if ((id->minor_rev_num && id->minor_rev_num <= 31) || (id->major_rev_num && id->minor_rev_num <= 31)) {
+ if ((id->minor_rev_num && id->minor_rev_num <= 31) || (id->major_rev_num && id->minor_rev_num <= 31))
+ {
printf("\n Drive conforms to: ");
- if (id->minor_rev_num <= 31)
- printf("%s: ", minor_str[id->minor_rev_num]);
- else
- printf("unknown: ");
- if (id->major_rev_num < 31) {
- for (i=0; i <= 15; i++) {
- if (id->major_rev_num & (1<<i))
- printf(" %u", i);
- }
+ if_else_printf((id->minor_rev_num <= 31),"%s: ","unknown: ", minor_str[id->minor_rev_num]);
+ if (id->major_rev_num < 31)
+ {
+ for (i=0; i <= 15; i++)
+ if_printf((id->major_rev_num & (1<<i))," %u", i);
}
}
#endif /* __NEW_HD_DRIVE_ID */
- printf("\n");
- printf("\n * signifies the current active mode\n");
- printf("\n");
+ printf("\n\n * signifies the current active mode\n\n");
}
#endif
static void flush_buffer_cache (int fd)
{
fsync (fd); /* flush buffers */
- if (ioctl(fd, BLKFLSBUF, NULL)) /* do it again, big time */
- bb_perror_msg("BLKFLSBUF failed");
+ bb_ioctl(fd, BLKFLSBUF, NULL,"BLKFLSBUF" ) ;/* do it again, big time */
#ifdef HDIO_DRIVE_CMD
- if (is_scsi_hd || is_xt_hd) {
- sleep(1);
- } else {
- if (ioctl(fd, HDIO_DRIVE_CMD, NULL) && errno != EINVAL) /* await completion */
- bb_perror_msg("HDIO_DRIVE_CMD(null) (wait for flush complete) failed");
- }
+ sleep(1);
+ if (ioctl(fd, HDIO_DRIVE_CMD, NULL) && errno != EINVAL) /* await completion */
+ bb_error_msg("HDIO_DRIVE_CMD");
#endif
}
static int seek_to_zero (int fd)
{
- if (lseek(fd, (off_t) 0, SEEK_SET)) {
- bb_perror_msg("lseek() failed");
+ if (lseek(fd, (off_t) 0, SEEK_SET))
return 1;
- }
return 0;
}
static int read_big_block (int fd, char *buf)
{
+
+ const char *string;
int i, rc;
- if ((rc = read(fd, buf, TIMING_BUF_BYTES)) != TIMING_BUF_BYTES) {
- if (rc) {
- if (rc == -1)
- bb_perror_msg("read() failed");
- else
- bb_error_msg("read(%u) returned %u bytes", TIMING_BUF_BYTES, rc);
- } else {
- fputs ("read() hit EOF - device too small\n", stderr);
+ if ((rc = read(fd, buf, TIMING_BUF_BYTES)) != TIMING_BUF_BYTES)
+ {
+ switch(rc)
+ {
+ case -1:
+ string = "read()";
+ break;
+ case 0:
+ string = "read() hit EOF - device too small";
+ break;
+ default:
+ string = "read(%u) returned %u bytes";
}
+ bb_error_msg(string, TIMING_BUF_BYTES, rc);
return 1;
}
+
/* access all sectors of buf to ensure the read fully completed */
for (i = 0; i < TIMING_BUF_BYTES; i += 512)
buf[i] &= 1;
@@ -1310,176 +1508,161 @@ static int read_big_block (int fd, char *buf)
static double correction = 0.0;
-void time_cache (int fd)
+void do_time (int flag, int fd)
+/*
+ flag = 0 time_cache
+ flag = 1 time_device
+*/
{
int i;
char *buf;
+ double elapsed;
struct itimerval e1, e2;
int shmid;
int timing_MB = TIMING_MB;
- if ((shmid = shmget(IPC_PRIVATE, TIMING_BUF_BYTES, 0600)) == -1) {
- bb_perror_msg ("could not allocate sharedmem buf");
+ if ((shmid = shmget(IPC_PRIVATE, TIMING_BUF_BYTES, 0600)) == -1)
+ {
+ bb_error_msg (bb_msg_shared_mem,"allocate"); /*"could not allocate sharedmem buf"*/
return;
}
- if (shmctl(shmid, SHM_LOCK, NULL) == -1) {
- bb_perror_msg ("could not lock sharedmem buf");
+ if (shmctl(shmid, SHM_LOCK, NULL) == -1)
+ {
+ bb_error_msg (bb_msg_shared_mem,"lock"); /*"could not lock sharedmem buf"*/
(void) shmctl(shmid, IPC_RMID, NULL);
return;
}
- if ((buf = shmat(shmid, (char *) 0, 0)) == (char *) -1) {
- bb_perror_msg ("could not attach sharedmem buf");
+ if ((buf = shmat(shmid, (char *) 0, 0)) == (char *) -1)
+ {
+ bb_error_msg (bb_msg_shared_mem,"attach"); /*"could not attach sharedmem buf"*/
(void) shmctl(shmid, IPC_RMID, NULL);
return;
}
if (shmctl(shmid, IPC_RMID, NULL) == -1)
- bb_perror_msg ("shmctl(,IPC_RMID,) failed");
-
- /* Clear out the device request queues & give them time to complete */
- sync();
- sleep(3);
-
- /* Calculate a correction factor for the basic
- * overhead of doing a read() from the buffer cache.
- * To do this, we read the data once to "cache it" and
- * to force full preallocation of our timing buffer,
- * and then we re-read it 10 times while timing it.
- *
- * getitimer() is used rather than gettimeofday() because
- * it is much more consistent (on my machine, at least).
- */
- setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL);
- if (seek_to_zero (fd)) return;
- if (read_big_block (fd, buf)) return;
- printf(" Timing buffer-cache reads: ");
- fflush(stdout);
+ bb_error_msg ("shmctl(,IPC_RMID,)");
/* Clear out the device request queues & give them time to complete */
- sync();
- sleep(1);
-
- /* Time re-reading from the buffer-cache */
- getitimer(ITIMER_REAL, &e1);
- for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i) {
- if (seek_to_zero (fd)) goto quit;
- if (read_big_block (fd, buf)) goto quit;
- }
- getitimer(ITIMER_REAL, &e2);
- correction = (e1.it_value.tv_sec - e2.it_value.tv_sec)
- + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
-
- /* Now remove the lseek() from the correction factor */
- getitimer(ITIMER_REAL, &e1);
- for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i) {
- if (seek_to_zero (fd)) goto quit;
- }
- getitimer(ITIMER_REAL, &e2);
- correction -= (e1.it_value.tv_sec - e2.it_value.tv_sec)
- + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
-
- if ((BUFCACHE_FACTOR * timing_MB) >= correction) /* more than 1MB/s */
- printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",
- (BUFCACHE_FACTOR * timing_MB), correction,
- (BUFCACHE_FACTOR * timing_MB) / correction);
- else
- printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",
- (BUFCACHE_FACTOR * timing_MB), correction,
- (BUFCACHE_FACTOR * timing_MB) / correction * 1024);
- correction /= BUFCACHE_FACTOR;
-
- flush_buffer_cache(fd);
- sleep(1);
-quit:
- if (-1 == shmdt(buf))
- bb_perror_msg ("could not detach sharedmem buf");
-}
-
-void time_device (int fd)
-{
- int i;
- char *buf;
- double elapsed;
- struct itimerval e1, e2;
- int shmid;
- int timing_MB = TIMING_MB;
+ sync_and_sleep(3);
+
+ if(flag == 0) /* Time cache */
+ {
+ /* Calculate a correction factor for the basic
+ * overhead of doing a read() from the buffer cache.
+ * To do this, we read the data once to "cache it" and
+ * to force full preallocation of our timing buffer,
+ * and then we re-read it 10 times while timing it.
+ *
+ * getitimer() is used rather than gettimeofday() because
+ * it is much more consistent (on my machine, at least).
+ */
+ setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL);
+ if (seek_to_zero (fd))
+ return;
+ if (read_big_block (fd, buf))
+ return;
+ printf(" Timing buffer-cache reads: ");
+ fflush(stdout);
+
+ /* Clear out the device request queues & give them time to complete */
+ sync_and_sleep(1);
+
+ /* Time re-reading from the buffer-cache */
+ getitimer(ITIMER_REAL, &e1);
+ for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i)
+ {
+ if (seek_to_zero (fd))
+ goto quit;
+ if (read_big_block (fd, buf))
+ goto quit;
+ }
+ getitimer(ITIMER_REAL, &e2);
+ correction = (e1.it_value.tv_sec - e2.it_value.tv_sec) + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
+
+ /* Now remove the lseek() from the correction factor */
+ getitimer(ITIMER_REAL, &e1);
+ for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i)
+ {
+ if (seek_to_zero (fd))
+ goto quit;
+ }
+ getitimer(ITIMER_REAL, &e2);
+ correction -= (e1.it_value.tv_sec - e2.it_value.tv_sec)
+ + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
+
+ if ((BUFCACHE_FACTOR * timing_MB) >= correction) /* more than 1MB/s */
+ printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",
+ (BUFCACHE_FACTOR * timing_MB), correction,
+ (BUFCACHE_FACTOR * timing_MB) / correction);
+ else
+ printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",
+ (BUFCACHE_FACTOR * timing_MB), correction,
+ (BUFCACHE_FACTOR * timing_MB) / correction * 1024);
+ correction /= BUFCACHE_FACTOR;
- if ((shmid = shmget(IPC_PRIVATE, TIMING_BUF_BYTES, 0600)) == -1) {
- bb_perror_msg ("could not allocate sharedmem buf");
- return;
- }
- if (shmctl(shmid, SHM_LOCK, NULL) == -1) {
- bb_perror_msg ("could not lock sharedmem buf");
- (void) shmctl(shmid, IPC_RMID, NULL);
- return;
- }
- if ((buf = shmat(shmid, (char *) 0, 0)) == (char *) -1) {
- bb_perror_msg ("could not attach sharedmem buf");
- (void) shmctl(shmid, IPC_RMID, NULL);
- return;
+ flush_buffer_cache(fd);
+ sleep(1);
}
- if (shmctl(shmid, IPC_RMID, NULL) == -1)
- bb_perror_msg ("shmctl(,IPC_RMID,) failed");
+ else /* Time device */
+ {
+ printf(" Timing buffered disk reads: ");
+ fflush(stdout);
- /* Clear out the device request queues & give them time to complete */
- sync();
- sleep(3);
+ /*
+ * getitimer() is used rather than gettimeofday() because
+ * it is much more consistent (on my machine, at least).
+ */
+ setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL);
- printf(" Timing buffered disk reads: ");
- fflush(stdout);
+ /* Now do the timings for real */
+ getitimer(ITIMER_REAL, &e1);
+ for (i = TIMING_BUF_COUNT; i > 0; --i)
+ {
+ if (read_big_block (fd, buf))
+ goto quit;
+ }
+ getitimer(ITIMER_REAL, &e2);
- /*
- * getitimer() is used rather than gettimeofday() because
- * it is much more consistent (on my machine, at least).
- */
- setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL);
+ elapsed = (e1.it_value.tv_sec - e2.it_value.tv_sec) + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
- /* Now do the timings for real */
- getitimer(ITIMER_REAL, &e1);
- for (i = TIMING_BUF_COUNT; i > 0; --i) {
- if (read_big_block (fd, buf)) goto quit;
- }
- getitimer(ITIMER_REAL, &e2);
+ if (timing_MB >= elapsed) /* more than 1MB/s */
+ printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",timing_MB, elapsed, timing_MB / elapsed);
+ else
+ printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",timing_MB, elapsed, timing_MB / elapsed * 1024);
- elapsed = (e1.it_value.tv_sec - e2.it_value.tv_sec)
- + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0);
- if (timing_MB >= elapsed) /* more than 1MB/s */
- printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",
- timing_MB, elapsed, timing_MB / elapsed);
- else
- printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",
- timing_MB, elapsed, timing_MB / elapsed * 1024);
+ /*"Hmm.. suspicious results: probably not enough free memory for a proper test.");*/
+ if (elapsed <= (correction * 2))
+ bb_error_msg(bb_msg_memory_exhausted);
- if (elapsed <= (correction * 2))
- printf("Hmm.. suspicious results: probably not enough free memory for a proper test.\n");
#if 0 /* the "estimate" is just plain wrong for many systems.. */
- else if (correction != 0.0) {
- printf(" Estimating raw driver speed: ");
- elapsed -= correction;
- if (timing_MB >= elapsed) /* more than 1MB/s */
- printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",
- timing_MB, elapsed, timing_MB / elapsed);
- else
- printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",
- timing_MB, elapsed, timing_MB / elapsed * 1024);
- }
+ else if (correction != 0.0) {
+ printf(" Estimating raw driver speed: ");
+ elapsed -= correction;
+ if (timing_MB >= elapsed) /* more than 1MB/s */
+ printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",
+ timing_MB, elapsed, timing_MB / elapsed);
+ else
+ printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",
+ timing_MB, elapsed, timing_MB / elapsed * 1024);
+ }
#endif
+ }
quit:
if (-1 == shmdt(buf))
- bb_perror_msg ("could not detach sharedmem buf");
+ bb_error_msg (bb_msg_shared_mem,"detach"); /*"could not detach sharedmem buf"*/
}
+
static void no_scsi (void)
{
- if (is_scsi_hd) {
- bb_error_msg_and_die(" operation not supported on SCSI disks\n");
- }
+ /*" operation not supported on SCSI disks"*/
+ if (is_scsi_hd)
+ bb_error_msg_and_die(bb_msg_op_not_supp,"SCSI");
}
static void no_xt (void)
{
- if (is_xt_hd) {
- bb_error_msg_and_die (" operation not supported on XT disks\n");
- }
+ if (is_xt_hd)
+ bb_error_msg_and_die(bb_msg_op_not_supp,"XT");
}
static void on_off (unsigned int value)
@@ -1492,19 +1675,20 @@ static void bus_state_value (unsigned int value)
{
const char *string;
- switch (value) {
- case BUSSTATE_ON:
- string = " (on)\n";
- break;
- case BUSSTATE_OFF:
- string = " (off)\n";
- break;
- case BUSSTATE_TRISTATE:
- string = " (tristate)\n";
- break;
- default:
- string = " (unknown: %d)\n";
- break;
+ switch (value)
+ {
+ case BUSSTATE_ON:
+ string = " (on)\n";
+ break;
+ case BUSSTATE_OFF:
+ string = " (off)\n";
+ break;
+ case BUSSTATE_TRISTATE:
+ string = " (tristate)\n";
+ break;
+ default:
+ string = " (unknown: %d)\n";
+ break;
}
printf(string, value);
}
@@ -1514,33 +1698,43 @@ static void bus_state_value (unsigned int value)
static void interpret_standby (unsigned int standby)
{
printf(" (");
- switch(standby) {
- case 0: printf("off");
- break;
- case 252: printf("21 minutes");
- break;
- case 253: printf("vendor-specific");
- break;
- case 254: printf("?reserved");
- break;
- case 255: printf("21 minutes + 15 seconds");
- break;
+ switch(standby)
+ {
+ case 0:
+ printf("off");
+ break;
+ case 252:
+ printf("21 minutes");
+ break;
+ case 253:
+ printf("vendor-specific");
+ break;
+ case 254:
+ printf("?reserved");
+ break;
+ case 255:
+ printf("21 minutes + 15 seconds");
+ break;
default:
- if (standby <= 240) {
+ if (standby <= 240)
+ {
unsigned int secs = standby * 5;
unsigned int mins = secs / 60;
secs %= 60;
- if (mins) printf("%u minutes", mins);
- if (mins && secs) printf(" + ");
- if (secs) printf("%u seconds", secs);
- } else if (standby <= 251) {
+ if_printf(mins,"%u minutes", mins);
+ if_printf((mins && secs)," + ");
+ if_printf(secs,"%u seconds", secs);
+ }
+ else if (standby <= 251)
+ {
unsigned int mins = (standby - 240) * 30;
unsigned int hrs = mins / 60;
mins %= 60;
- if (hrs) printf("%u hours", hrs);
- if (hrs && mins) printf(" + ");
- if (mins) printf("%u minutes", mins);
- } else
+ if_printf(hrs,"%u hours", hrs);
+ if_printf((hrs && mins)," + ");
+ if_printf(mins,"%u minutes", mins);
+ }
+ else
printf("illegal value");
break;
}
@@ -1590,31 +1784,35 @@ static const struct xfermode_entry xfermode_table[] = {
static int translate_xfermode(char * name)
{
- const struct xfermode_entry *tmp;
- char *endptr;
- int val = -1;
+ const struct xfermode_entry *tmp;
+ char *endptr;
+ int val = -1;
+
+ for (tmp = xfermode_table; tmp->name != NULL; ++tmp)
+ {
+ if (!strcmp(name, tmp->name))
+ return tmp->val;
- for (tmp = xfermode_table; tmp->name != NULL; ++tmp) {
- if (!strcmp(name, tmp->name))
- return tmp->val;
- }
+ }
- val = strtol(name, &endptr, 10);
- if (*endptr == '\0')
- return val;
+ val = strtol(name, &endptr, 10);
+ if (*endptr == '\0')
+ return val;
- return -1;
+ return -1;
}
static void interpret_xfermode (unsigned int xfermode)
{
printf(" (");
switch(xfermode) {
- case 0: printf("default PIO mode");
- break;
- case 1: printf("default PIO mode, disable IORDY");
- break;
+ case 0:
+ printf("default PIO mode");
+ break;
+ case 1:
+ printf("default PIO mode, disable IORDY");
+ break;
case 8:
case 9:
case 10:
@@ -1622,8 +1820,9 @@ static void interpret_xfermode (unsigned int xfermode)
case 12:
case 13:
case 14:
- case 15: printf("PIO flow control mode%u", xfermode-8);
- break;
+ case 15:
+ printf("PIO flow control mode%u", xfermode-8);
+ break;
case 16:
case 17:
case 18:
@@ -1631,8 +1830,9 @@ static void interpret_xfermode (unsigned int xfermode)
case 20:
case 21:
case 22:
- case 23: printf("singleword DMA mode%u", xfermode-16);
- break;
+ case 23:
+ printf("singleword DMA mode%u", xfermode-16);
+ break;
case 32:
case 33:
case 34:
@@ -1640,8 +1840,9 @@ static void interpret_xfermode (unsigned int xfermode)
case 36:
case 37:
case 38:
- case 39: printf("multiword DMA mode%u", xfermode-32);
- break;
+ case 39:
+ printf("multiword DMA mode%u", xfermode-32);
+ break;
case 64:
case 65:
case 66:
@@ -1649,11 +1850,12 @@ static void interpret_xfermode (unsigned int xfermode)
case 68:
case 69:
case 70:
- case 71: printf("UltraDMA mode%u", xfermode-64);
- break;
+ case 71:
+ printf("UltraDMA mode%u", xfermode-64);
+ break;
default:
- printf("unknown, probably not valid");
- break;
+ printf("unknown, probably not valid");
+ break;
}
printf(")\n");
}
@@ -1678,280 +1880,260 @@ static void process_dev (char *devname)
if (stat(devname,&stat_buf))
bb_perror_msg_and_die(devname);
- switch(major(stat_buf.st_rdev)) {
+ switch(major(stat_buf.st_rdev))
+ {
#ifdef SCSI_DISK0_MAJOR
- case (SCSI_DISK0_MAJOR):
- case (SCSI_DISK1_MAJOR):
- case (SCSI_DISK2_MAJOR):
- case (SCSI_DISK3_MAJOR):
- case (SCSI_DISK4_MAJOR):
- case (SCSI_DISK5_MAJOR):
- case (SCSI_DISK6_MAJOR):
- case (SCSI_DISK7_MAJOR):
+ case (SCSI_DISK0_MAJOR):
+ case (SCSI_DISK1_MAJOR):
+ case (SCSI_DISK2_MAJOR):
+ case (SCSI_DISK3_MAJOR):
+ case (SCSI_DISK4_MAJOR):
+ case (SCSI_DISK5_MAJOR):
+ case (SCSI_DISK6_MAJOR):
+ case (SCSI_DISK7_MAJOR):
#else
- case (SCSI_DISK_MAJOR):
+ case (SCSI_DISK_MAJOR):
#endif
#ifdef MD_MAJOR
- case (MD_MAJOR):
+ case (MD_MAJOR):
#endif
- case (VXVM_MAJOR):
+ case (VXVM_MAJOR):
#ifdef LVM_BLK_MAJOR
- case (LVM_BLK_MAJOR):
+ case (LVM_BLK_MAJOR):
#endif
- case (CCISS_MAJOR):
- is_scsi_hd = 1;
- break;
+ case (CCISS_MAJOR):
+ is_scsi_hd = 1;
+ break;
#ifdef XT_DISK_MAJOR
- case (XT_DISK_MAJOR):
- is_xt_hd = 1;
- break;
+ case (XT_DISK_MAJOR):
+ is_xt_hd = 1;
+ break;
#endif
- case IDE0_MAJOR:
- case IDE1_MAJOR:
+ case IDE0_MAJOR:
+ case IDE1_MAJOR:
#ifdef IDE2_MAJOR
- case IDE2_MAJOR:
+ case IDE2_MAJOR:
#endif
#ifdef IDE3_MAJOR
- case IDE3_MAJOR:
+ case IDE3_MAJOR:
#endif
#ifdef IDE4_MAJOR
- case IDE4_MAJOR:
+ case IDE4_MAJOR:
#endif
#ifdef IDE5_MAJOR
- case IDE5_MAJOR:
+ case IDE5_MAJOR:
#endif
#ifdef IDE6_MAJOR
- case IDE6_MAJOR:
+ case IDE6_MAJOR:
#endif
#ifdef IDE7_MAJOR
- case IDE7_MAJOR:
+ case IDE7_MAJOR:
#endif
#ifdef IDE8_MAJOR
- case IDE8_MAJOR:
+ case IDE8_MAJOR:
#endif
#ifdef IDE9_MAJOR
- case IDE9_MAJOR:
+ case IDE9_MAJOR:
#endif
- break; /* do nothing */
- default:
- bb_error_msg_and_die("%s not supported by hdparm",devname);
+ break; /* do nothing */
+ default:
+ bb_error_msg_and_die("%s not supported",devname);
}
- fd = open (devname, O_RDONLY|O_NONBLOCK);
- if (fd < 0)
- bb_perror_msg_and_die(devname);
- if (!quiet)
- printf("\n%s:\n", devname);
+ fd = bb_xopen (devname, O_RDONLY|O_NONBLOCK);
+ if_printf( (!quiet),"\n%s:\n", devname);
- if (set_readahead) {
- if (get_readahead)
- printf(" setting fs readahead to %ld\n", readahead);
- if (ioctl(fd, BLKRASET, readahead))
- bb_perror_msg(" BLKRASET failed");
+ if (set_readahead)
+ {
+ if_printf(get_readahead," setting fs readahead to %ld\n", readahead);
+ bb_ioctl(fd, BLKRASET,(int *)readahead,"BLKRASET");
}
#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
- if (unregister_hwif) {
+ if (unregister_hwif)
+ {
no_scsi();
printf(" attempting to unregister hwif#%u\n", hwif);
- if (ioctl(fd, HDIO_UNREGISTER_HWIF, hwif))
- bb_perror_msg(" HDIO_UNREGISTER_HWIF failed");
+ bb_ioctl(fd, HDIO_UNREGISTER_HWIF,(int *)hwif,"HDIO_UNREGISTER_HWIF");
}
#endif
#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
- if (scan_hwif) {
+ if (scan_hwif)
+ {
int args[3];
no_scsi();
printf(" attempting to scan hwif (0x%x, 0x%x, %u)\n", hwif_data, hwif_ctrl, hwif_irq);
args[0] = hwif_data;
args[1] = hwif_ctrl;
args[2] = hwif_irq;
- if (ioctl(fd, HDIO_SCAN_HWIF, args))
- bb_perror_msg(" HDIO_SCAN_HWIF failed");
+ bb_ioctl(fd, HDIO_SCAN_HWIF, args, "HDIO_SCAN_HWIF");
}
#endif
- if (set_piomode) {
+ if (set_piomode)
+ {
no_scsi();
no_xt();
- if (noisy_piomode) {
+
+ if (noisy_piomode)
+ {
+ printf(" attempting to ");
if (piomode == 255)
- printf(" attempting to auto-tune PIO mode\n");
+ printf("auto-tune PIO mode\n");
else if (piomode < 100)
- printf(" attempting to set PIO mode to %d\n", piomode);
+ printf("set PIO mode to %d\n", piomode);
else if (piomode < 200)
- printf(" attempting to set MDMA mode to %d\n", (piomode-100));
+ printf("set MDMA mode to %d\n", (piomode-100));
else
- printf(" attempting to set UDMA mode to %d\n", (piomode-200));
+ printf("set UDMA mode to %d\n", (piomode-200));
}
- if (ioctl(fd, HDIO_SET_PIO_MODE, piomode))
- bb_perror_msg(" HDIO_SET_PIO_MODE failed");
+ bb_ioctl(fd, HDIO_SET_PIO_MODE, (int *)piomode, "HDIO_SET_PIO_MODE");
}
- if (set_io32bit) {
+ if (set_io32bit)
+ {
no_scsi();
no_xt();
- if (get_io32bit)
- printf(" setting 32-bit IO_support flag to %ld\n", io32bit);
- if (ioctl(fd, HDIO_SET_32BIT, io32bit))
- bb_perror_msg(" HDIO_SET_32BIT failed");
+ if_printf(get_io32bit," setting 32-bit IO_support flag to %ld\n", io32bit);
+ bb_ioctl(fd, HDIO_SET_32BIT, (int *)io32bit, "HDIO_SET_32BIT");
}
- if (set_mult) {
+ if (set_mult)
+ {
no_scsi();
no_xt();
- if (get_mult)
- printf(" setting multcount to %ld\n", mult);
- if (ioctl(fd, HDIO_SET_MULTCOUNT, mult))
- bb_perror_msg(" HDIO_SET_MULTCOUNT failed");
+ if_printf(get_mult, " setting multcount to %ld\n", mult);
+ if(ioctl(fd, HDIO_SET_MULTCOUNT, mult))
+ bb_error_msg("HDIO_SET_MULTCOUNT");
#ifndef HDIO_DRIVE_CMD
- else force_operation = 1;
+ else
+ force_operation = 1;
#endif
}
- if (set_readonly) {
- if (get_readonly) {
- printf(" setting readonly to %ld", readonly);
- on_off(readonly);
- }
- if (ioctl(fd, BLKROSET, &readonly))
- bb_perror_msg(" BLKROSET failed");
+ if (set_readonly)
+ {
+ if_printf_on_off(get_readonly," setting readonly to %ld", readonly);
+ bb_ioctl(fd, BLKROSET, &readonly, "BLKROSET");
}
- if (set_unmask) {
+ if (set_unmask)
+ {
no_scsi();
no_xt();
- if (get_unmask) {
- printf(" setting unmaskirq to %ld", unmask);
- on_off(unmask);
- }
- if (ioctl(fd, HDIO_SET_UNMASKINTR, unmask))
- bb_perror_msg(" HDIO_SET_UNMASKINTR failed");
+ if_printf_on_off(get_unmask," setting unmaskirq to %ld", unmask);
+ bb_ioctl(fd, HDIO_SET_UNMASKINTR, (int *)unmask, "HDIO_SET_UNMASKINTR");
}
#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
- if (set_dma) {
+ if (set_dma)
+ {
no_scsi();
- if (get_dma) {
- printf(" setting using_dma to %ld", dma);
- on_off(dma);
- }
- if (ioctl(fd, HDIO_SET_DMA, dma))
- bb_perror_msg(" HDIO_SET_DMA failed");
+ if_printf_on_off(get_dma," setting using_dma to %ld", dma);
+ bb_ioctl(fd, HDIO_SET_DMA, (int *)dma, "HDIO_SET_DMA");
}
#endif /* CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA */
- if (set_dma_q) {
+ if (set_dma_q)
+ {
no_scsi();
- if (get_dma_q) {
- printf(" setting DMA queue_depth to %ld", dma_q);
- on_off(dma_q);
- }
- if (ioctl(fd, HDIO_SET_QDMA, dma_q))
- bb_perror_msg(" HDIO_SET_QDMA failed");
+ if_printf_on_off(get_dma_q," setting DMA queue_depth to %ld", dma_q);
+ bb_ioctl(fd, HDIO_SET_QDMA, (int *)dma_q, "HDIO_SET_QDMA");
}
- if (set_nowerr) {
+ if (set_nowerr)
+ {
no_scsi();
no_xt();
- if (get_nowerr) {
- printf(" setting nowerr to %ld", nowerr);
- on_off(nowerr);
- }
- if (ioctl(fd, HDIO_SET_NOWERR, nowerr))
- bb_perror_msg(" HDIO_SET_NOWERR failed");
+ if_printf_on_off(get_nowerr," setting nowerr to %ld", nowerr);
+ bb_ioctl(fd, HDIO_SET_NOWERR, (int *)nowerr,"HDIO_SET_NOWERR");
}
- if (set_keep) {
+ if (set_keep)
+ {
no_scsi();
no_xt();
- if (get_keep) {
- printf(" setting keep_settings to %ld", keep);
- on_off(keep);
- }
- if (ioctl(fd, HDIO_SET_KEEPSETTINGS, keep))
- bb_perror_msg(" HDIO_SET_KEEPSETTINGS failed");
+ if_printf_on_off(get_keep," setting keep_settings to %ld", keep);
+ bb_ioctl(fd, HDIO_SET_KEEPSETTINGS, (int *)keep,"HDIO_SET_KEEPSETTINGS");
}
#ifdef HDIO_DRIVE_CMD
- if (set_doorlock) {
+ if (set_doorlock)
+ {
unsigned char args[4] = {0,0,0,0};
no_scsi();
no_xt();
+
args[0] = doorlock ? WIN_DOORLOCK : WIN_DOORUNLOCK;
- if (get_doorlock) {
- printf(" setting drive doorlock to %ld", doorlock);
- on_off(doorlock);
- }
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(doorlock) failed");
+ if_printf_on_off(get_doorlock," setting drive doorlock to %ld", doorlock);
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(doorlock)");
}
- if (set_dkeep) {
+ if (set_dkeep)
+ {
/* lock/unlock the drive's "feature" settings */
unsigned char args[4] = {WIN_SETFEATURES,0,0,0};
no_scsi();
no_xt();
- if (get_dkeep) {
- printf(" setting drive keep features to %ld", dkeep);
- on_off(dkeep);
- }
+
+ if_printf_on_off(get_dkeep," setting drive keep features to %ld", dkeep);
args[2] = dkeep ? 0x66 : 0xcc;
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(keepsettings) failed");
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(keepsettings)");
}
- if (set_defects) {
+ if (set_defects)
+ {
unsigned char args[4] = {WIN_SETFEATURES,0,0x04,0};
no_scsi();
args[2] = defects ? 0x04 : 0x84;
- if (get_defects)
- printf(" setting drive defect-mgmt to %ld\n", defects);
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(defectmgmt) failed");
+ if_printf(get_defects," setting drive defect-mgmt to %ld\n", defects);
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(defectmgmt)");
}
- if (set_prefetch) {
+ if (set_prefetch)
+ {
unsigned char args[4] = {WIN_SETFEATURES,0,0xab,0};
no_scsi();
no_xt();
+
args[1] = prefetch;
- if (get_prefetch)
- printf(" setting drive prefetch to %ld\n", prefetch);
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(setprefetch) failed");
+ if_printf(get_prefetch," setting drive prefetch to %ld\n", prefetch);
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setprefetch)");
}
- if (set_xfermode) {
+ if (set_xfermode)
+ {
unsigned char args[4] = {WIN_SETFEATURES,0,3,0};
no_scsi();
no_xt();
+
args[1] = xfermode_requested;
- if (get_xfermode) {
+ if (get_xfermode)
+ {
printf(" setting xfermode to %d", xfermode_requested);
interpret_xfermode(xfermode_requested);
}
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(setxfermode) failed");
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(setxfermode)");
}
- if (set_lookahead) {
+ if (set_lookahead)
+ {
unsigned char args[4] = {WIN_SETFEATURES,0,0,0};
no_scsi();
no_xt();
+
args[2] = lookahead ? 0xaa : 0x55;
- if (get_lookahead) {
- printf(" setting drive read-lookahead to %ld", lookahead);
- on_off(lookahead);
- }
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(setreadahead) failed");
+ if_printf_on_off(get_lookahead," setting drive read-lookahead to %ld", lookahead);
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setreadahead)");
}
- if (set_apmmode) {
+ if (set_apmmode)
+ {
unsigned char args[4] = {WIN_SETFEATURES,0,0,0};
no_scsi();
- if (apmmode<1) apmmode=1;
- if (apmmode>255) apmmode=255;
- if (get_apmmode)
- printf(" setting Advanced Power Management level to");
- if (apmmode==255) {
+ check_if_min_and_set_val(apmmode,1);
+ check_if_maj_and_set_val(apmmode,255);
+ if_printf(get_apmmode," setting APM level to");
+ if (apmmode==255)
+ {
/* disable Advanced Power Management */
- args[2] = 0x85; /* feature register */
- if (get_apmmode) printf(" disabled\n");
- } else {
+ args[2] = 0x85; /* feature register */
+ if_printf(get_apmmode," disabled\n");
+ }
+ else
+ {
/* set Advanced Power Management mode */
- args[2] = 0x05; /* feature register */
+ args[2] = 0x05; /* feature register */
args[1] = apmmode; /* sector count register */
- if (get_apmmode) printf(" 0x%02lX (%ld)\n",apmmode,apmmode);
- }
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD failed");
+ if_printf(get_apmmode," 0x%02lX (%ld)\n",apmmode,apmmode);
+ }
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD");
}
- if (set_wcache) {
+ if (set_wcache)
+ {
#ifdef DO_FLUSHCACHE
#ifndef WIN_FLUSHCACHE
#define WIN_FLUSHCACHE 0xe7
@@ -1962,22 +2144,19 @@ static void process_dev (char *devname)
no_scsi();
no_xt();
args[2] = wcache ? 0x02 : 0x82;
- if (get_wcache) {
- printf(" setting drive write-caching to %ld", wcache);
- on_off(wcache);
- }
+ if_printf_on_off(get_wcache," setting drive write-caching to %ld", wcache);
#ifdef DO_FLUSHCACHE
if (!wcache && ioctl(fd, HDIO_DRIVE_CMD, &flushcache))
- bb_perror_msg (" HDIO_DRIVE_CMD(flushcache) failed");
+ bb_error_msg ("HDIO_DRIVE_CMD(flushcache)");
#endif /* DO_FLUSHCACHE */
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(setcache) failed");
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setcache)");
#ifdef DO_FLUSHCACHE
if (!wcache && ioctl(fd, HDIO_DRIVE_CMD, &flushcache))
- bb_perror_msg (" HDIO_DRIVE_CMD(flushcache) failed");
+ bb_error_msg ("HDIO_DRIVE_CMD(flushcache)");
#endif /* DO_FLUSHCACHE */
}
- if (set_standbynow) {
+ if (set_standbynow)
+ {
#ifndef WIN_STANDBYNOW1
#define WIN_STANDBYNOW1 0xE0
#endif
@@ -1987,13 +2166,13 @@ static void process_dev (char *devname)
unsigned char args1[4] = {WIN_STANDBYNOW1,0,0,0};
unsigned char args2[4] = {WIN_STANDBYNOW2,0,0,0};
no_scsi();
- if (get_standbynow)
- printf(" issuing standby command\n");
+ if_printf(get_standbynow," issuing standby command\n");
if (ioctl(fd, HDIO_DRIVE_CMD, &args1)
&& ioctl(fd, HDIO_DRIVE_CMD, &args2))
- bb_perror_msg(" HDIO_DRIVE_CMD(standby) failed");
+ bb_error_msg("HDIO_DRIVE_CMD(standby)");
}
- if (set_sleepnow) {
+ if (set_sleepnow)
+ {
#ifndef WIN_SLEEPNOW1
#define WIN_SLEEPNOW1 0xE6
#endif
@@ -2003,93 +2182,106 @@ static void process_dev (char *devname)
unsigned char args1[4] = {WIN_SLEEPNOW1,0,0,0};
unsigned char args2[4] = {WIN_SLEEPNOW2,0,0,0};
no_scsi();
- if (get_sleepnow)
- printf(" issuing sleep command\n");
+ if_printf(get_sleepnow," issuing sleep command\n");
if (ioctl(fd, HDIO_DRIVE_CMD, &args1)
&& ioctl(fd, HDIO_DRIVE_CMD, &args2))
- bb_perror_msg(" HDIO_DRIVE_CMD(sleep) failed");
+ bb_error_msg("HDIO_DRIVE_CMD(sleep)");
}
- if (set_seagate) {
+ if (set_seagate)
+ {
unsigned char args[4] = {0xfb,0,0,0};
no_scsi();
no_xt();
- if (get_seagate)
- printf(" disabling Seagate auto powersaving mode\n");
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(seagatepwrsave) failed");
+ if_printf(get_seagate," disabling Seagate auto powersaving mode\n");
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(seagatepwrsave)");
}
- if (set_standby) {
+ if (set_standby)
+ {
unsigned char args[4] = {WIN_SETIDLE1,standby_requested,0,0};
no_scsi();
no_xt();
- if (get_standby) {
+ if (get_standby)
+ {
printf(" setting standby to %lu", standby_requested);
interpret_standby(standby_requested);
}
- if (ioctl(fd, HDIO_DRIVE_CMD, &args))
- bb_perror_msg(" HDIO_DRIVE_CMD(setidle1) failed");
+ bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setidle1)");
}
#else /* HDIO_DRIVE_CMD */
- if (force_operation) {
+ if (force_operation)
+ {
char buf[512];
flush_buffer_cache(fd);
if (-1 == read(fd, buf, sizeof(buf)))
- bb_perror_msg(" access failed");
+ bb_error_msg("access failed");
}
#endif /* HDIO_DRIVE_CMD */
if (!flagcount)
verbose = 1;
- if ((verbose && !is_scsi_hd && !is_xt_hd) || get_mult || get_identity) {
+ if ((verbose && !is_scsi_hd && !is_xt_hd) || get_mult || get_identity)
+ {
no_scsi();
multcount = -1;
- if (ioctl(fd, HDIO_GET_MULTCOUNT, &multcount)) {
+ if (ioctl(fd, HDIO_GET_MULTCOUNT, &multcount))
+ {
if ((verbose && !is_xt_hd) || get_mult)
- bb_perror_msg(" HDIO_GET_MULTCOUNT failed");
- } else if (verbose | get_mult) {
+ bb_error_msg("HDIO_GET_MULTCOUNT");
+ }
+ else if (verbose | get_mult)
+ {
printf(" multcount = %2ld", multcount);
on_off(multcount);
}
}
- if ((verbose && !is_scsi_hd && !is_xt_hd) || get_io32bit) {
+ if ((verbose && !is_scsi_hd && !is_xt_hd) || get_io32bit)
+ {
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_GET_32BIT, &parm))
- bb_perror_msg(" HDIO_GET_32BIT failed");
- else {
+ if(ioctl(fd, HDIO_GET_32BIT, &parm))
+ bb_error_msg("HDIO_GET_32BIT");
+ else
+ {
printf(" IO_support =%3ld (", parm);
- switch (parm) {
- case 0: printf("default ");
- case 2: printf("16-bit)\n");
+ switch (parm)
+ {
+ case 0:
+ printf("default ");
+ case 2:
+ printf("16-bit)\n");
break;
- case 1: printf("32-bit)\n");
+ case 1:
+ printf("32-bit)\n");
break;
- case 3: printf("32-bit w/sync)\n");
+ case 3:
+ printf("32-bit w/sync)\n");
break;
- case 8: printf("Request-Queue-Bypass)\n");
+ case 8:
+ printf("Request-Queue-Bypass)\n");
break;
- default:printf("\?\?\?)\n");
+ default:
+ printf("\?\?\?)\n");
+ /*esac*/
}
}
}
- if ((verbose && !is_scsi_hd && !is_xt_hd) || get_unmask) {
+ if ((verbose && !is_scsi_hd && !is_xt_hd) || get_unmask)
+ {
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_GET_UNMASKINTR, &parm))
- bb_perror_msg(" HDIO_GET_UNMASKINTR failed");
- else {
- printf(" unmaskirq = %2ld", parm);
- on_off(parm);
- }
+ bb_ioctl_on_off(fd, HDIO_GET_UNMASKINTR,(unsigned long *)parm,
+ "HDIO_GET_UNMASKINTR"," unmaskirq = %2ld");
}
+
#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
if ((verbose && !is_scsi_hd) || get_dma) {
no_scsi();
- if (ioctl(fd, HDIO_GET_DMA, &parm))
- bb_perror_msg(" HDIO_GET_DMA failed");
- else {
+ if(ioctl(fd, HDIO_GET_DMA, &parm))
+ bb_error_msg("HDIO_GET_DMA");
+ else
+ {
printf(" using_dma = %2ld", parm);
if (parm == 8)
printf(" (DMA-Assisted-PIO)\n");
@@ -2098,53 +2290,39 @@ static void process_dev (char *devname)
}
}
#endif
- if (get_dma_q) {
+ if (get_dma_q)
+ {
no_scsi();
- if(ioctl(fd, HDIO_GET_QDMA, &parm)) {
- bb_perror_msg(" HDIO_GET_QDMA failed");
- } else {
- printf(" queue_depth = %2ld", parm);
- on_off(parm);
- }
+ bb_ioctl_on_off (fd, HDIO_GET_QDMA,(unsigned long *)parm,
+ "HDIO_GET_QDMA"," queue_depth = %2ld");
}
- if ((verbose && !is_scsi_hd && !is_xt_hd) || get_keep) {
+ if ((verbose && !is_scsi_hd && !is_xt_hd) || get_keep)
+ {
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_GET_KEEPSETTINGS, &parm))
- bb_perror_msg(" HDIO_GET_KEEPSETTINGS failed");
- else {
- printf(" keepsettings = %2ld", parm);
- on_off(parm);
- }
+ bb_ioctl_on_off (fd, HDIO_GET_KEEPSETTINGS,(unsigned long *)parm,
+ "HDIO_GET_KEEPSETTINGS"," keepsettings = %2ld");
}
- if (get_nowerr) {
+ if (get_nowerr)
+ {
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_GET_NOWERR, &parm))
- bb_perror_msg(" HDIO_GET_NOWERR failed");
- else {
- printf(" nowerr = %2ld", parm);
- on_off(parm);
- }
+ bb_ioctl_on_off (fd, HDIO_GET_NOWERR,(unsigned long *)&parm,
+ " HDIO_GET_NOWERR"," nowerr = %2ld");
}
- if (verbose || get_readonly) {
- if (ioctl(fd, BLKROGET, &parm))
- bb_perror_msg(" BLKROGET failed");
- else {
- printf(" readonly = %2ld", parm);
- on_off(parm);
- }
+ if (verbose || get_readonly)
+ {
+ bb_ioctl_on_off(fd, BLKROGET,(unsigned long *)parm,
+ " BLKROGET"," readonly = %2ld");
}
- if ((verbose && !is_scsi_hd) || get_readahead) {
- if (ioctl(fd, BLKRAGET, &parm))
- bb_perror_msg(" BLKRAGET failed");
- else {
- printf(" readahead = %2ld", parm);
- on_off(parm);
- }
+ if ((verbose && !is_scsi_hd) || get_readahead)
+ {
+ bb_ioctl_on_off (fd, BLKRAGET, (unsigned long *) parm,
+ " BLKRAGET"," readahead = %2ld");
}
- if (verbose || get_geom) {
+ if (verbose || get_geom)
+ {
static const char msg[] = " geometry = %u/%u/%u, sectors = %ld, start = %ld\n";
static struct hd_geometry g;
#ifdef HDIO_GETGEO_BIG
@@ -2152,17 +2330,19 @@ static void process_dev (char *devname)
#endif
if (ioctl(fd, BLKGETSIZE, &parm))
- bb_perror_msg(" BLKGETSIZE failed");
+ bb_error_msg("BLKGETSIZE");
#ifdef HDIO_GETGEO_BIG
else if (!ioctl(fd, HDIO_GETGEO_BIG, &bg))
printf(msg, bg.cylinders, bg.heads, bg.sectors, parm, bg.start);
#endif
else if (ioctl(fd, HDIO_GETGEO, &g))
- bb_perror_msg(" HDIO_GETGEO failed");
- else printf(msg, g.cylinders, g.heads, g.sectors, parm, g.start);
+ bb_error_msg("HDIO_GETGEO");
+ else
+ printf(msg, g.cylinders, g.heads, g.sectors, parm, g.start);
}
#ifdef HDIO_DRIVE_CMD
- if (get_powermode) {
+ if (get_powermode)
+ {
#ifndef WIN_CHECKPOWERMODE1
#define WIN_CHECKPOWERMODE1 0xE5
#endif
@@ -2173,133 +2353,125 @@ static void process_dev (char *devname)
const char *state;
no_scsi();
if (ioctl(fd, HDIO_DRIVE_CMD, &args)
- && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
- && ioctl(fd, HDIO_DRIVE_CMD, &args)) {
+ && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
+ && ioctl(fd, HDIO_DRIVE_CMD, &args))
+ {
if (errno != EIO || args[0] != 0 || args[1] != 0)
state = "unknown";
else
state = "sleeping";
- } else {
- state = (args[2] == 255) ? "active/idle" : "standby";
}
+ else
+ state = (args[2] == 255) ? "active/idle" : "standby";
+
printf(" drive state is: %s\n", state);
}
#endif
#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
- if (perform_reset) {
+ if (perform_reset)
+ {
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_DRIVE_RESET, NULL))
- bb_perror_msg(" HDIO_DRIVE_RESET failed");
+ bb_ioctl(fd, HDIO_DRIVE_RESET, NULL, "HDIO_DRIVE_RESET");
}
#endif /* CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET */
#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
- if (perform_tristate) {
+ if (perform_tristate)
+ {
unsigned char args[4] = {0,tristate,0,0};
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_TRISTATE_HWIF, &args))
- bb_perror_msg(" HDIO_TRISTATE_HWIF failed");
+ bb_ioctl(fd, HDIO_TRISTATE_HWIF, &args, "HDIO_TRISTATE_HWIF");
}
#endif /* CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF */
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
- if (get_identity) {
+ if (get_identity)
+ {
static struct hd_driveid id;
no_scsi();
no_xt();
- if (!ioctl(fd, HDIO_GET_IDENTITY, &id)) {
- if (multcount != -1) {
+ if (!ioctl(fd, HDIO_GET_IDENTITY, &id))
+ {
+ if (multcount != -1)
+ {
id.multsect = multcount;
id.multsect_valid |= 1;
- } else
+ }
+ else
id.multsect_valid &= ~1;
dump_identity(&id);
- } else if (errno == -ENOMSG)
+ }
+ else if (errno == -ENOMSG)
printf(" no identification info available\n");
else
- bb_perror_msg(" HDIO_GET_IDENTITY failed");
+ bb_error_msg("HDIO_GET_IDENTITY");
}
- if (get_IDentity) {
+
+ if (get_IDentity)
+ {
unsigned char args[4+512] = {WIN_IDENTIFY,0,0,1,};
unsigned i;
+
no_scsi();
no_xt();
- if (ioctl(fd, HDIO_DRIVE_CMD, &args)) {
+
+ if (ioctl(fd, HDIO_DRIVE_CMD, &args))
+ {
args[0] = WIN_PIDENTIFY;
- if (ioctl(fd, HDIO_DRIVE_CMD, &args)) {
- bb_perror_msg(" HDIO_DRIVE_CMD(identify) failed");
+ if (ioctl(fd, HDIO_DRIVE_CMD, &args))
+ {
+ bb_error_msg("HDIO_DRIVE_CMD(identify)");
goto identify_abort;
}
}
- for(i=0; i<(sizeof args)/2; i+=2) {
+ for(i=0; i<(sizeof args)/2; i+=2)
__le16_to_cpus((uint16_t *)(&args[i]));
- }
+
identify((void *)&args[4], NULL);
-identify_abort: ;
+identify_abort:
+ /* VOID */;
}
#endif
#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
- if (set_busstate) {
+ if (set_busstate)
+ {
no_scsi();
- if (get_busstate) {
+ if (get_busstate)
+ {
printf(" setting bus state to %d", busstate);
bus_state_value(busstate);
}
- if (ioctl(fd, HDIO_SET_BUSSTATE, busstate))
- bb_perror_msg(" HDIO_SET_BUSSTATE failed");
+ bb_ioctl(fd, HDIO_SET_BUSSTATE, (int *)busstate, "HDIO_SET_BUSSTATE");
}
#endif
#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
- if (get_busstate) {
+ if (get_busstate)
+ {
no_scsi();
if (ioctl(fd, HDIO_GET_BUSSTATE, &parm))
- bb_perror_msg(" HDIO_GET_BUSSTATE failed");
- else {
+ bb_error_msg("HDIO_GET_BUSSTATE");
+ else
+ {
printf(" busstate = %2ld", parm);
bus_state_value(parm);
}
}
#endif
- if (reread_partn) {
- if (ioctl(fd, BLKRRPART, NULL)) {
- bb_perror_msg(" BLKRRPART failed");
- }
- }
+ if (reread_partn)
+ bb_ioctl(fd, BLKRRPART, NULL, "BLKRRPART");
+
if (do_ctimings)
- time_cache (fd);
+ do_time(0,fd); /*time cache */
if (do_timings)
- time_device (fd);
+ do_time(1,fd); /*time device */
if (do_flush)
flush_buffer_cache (fd);
close (fd);
}
-#define GET_NUMBER(flag,num) num = 0; \
- if (!*p && argc && isdigit(**argv)) \
- p = *argv++, --argc; \
- while (isdigit(*p)) { \
- flag = 1; \
- num = (num * 10) + (*p++ - '0'); \
- }
-
-#define GET_STRING(flag, num) tmpstr = name; \
- tmpstr[0] = '\0'; \
- if (!*p && argc && isalnum(**argv)) \
- p = *argv++, --argc; \
- while (isalnum(*p) && (tmpstr - name) < 31) { \
- tmpstr[0] = *p++; \
- tmpstr[1] = '\0'; \
- ++tmpstr; \
- } \
- num = translate_xfermode(name); \
- if (num == -1) \
- flag = 0; \
- else \
- flag = 1;
-
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
static int fromhex (unsigned char c)
{
@@ -2318,7 +2490,8 @@ static int identify_from_stdin (void)
if (count != 1280)
bb_error_msg_and_die("read(1280 bytes) failed (rc=%d)", count);
- for (i = 0; count >= 4; ++i) {
+ for (i = 0; count >= 4; ++i)
+ {
sbuf[i] = (fromhex(b[0]) << 12) | (fromhex(b[1]) << 8) | (fromhex(b[2]) << 4) | fromhex(b[3]);
__le16_to_cpus((uint16_t *)(&sbuf[i]));
b += 5;
@@ -2332,29 +2505,39 @@ static int identify_from_stdin (void)
/* our main() routine: */
int hdparm_main(int argc, char **argv)
{
+ const char * const bb_msg_missing_value ="missing value";
char c, *p;
char *tmpstr;
char name[32];
- int neg;
+ /*int neg;*/
++argv;
if (!--argc)
bb_show_usage();
- while (argc--) {
+
+ while (argc--)
+ {
#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY
- if (!strcmp("-Istdin", *argv)) {
+ if (!strcmp("-Istdin", *argv))
+ {
exit(identify_from_stdin());
}
#endif
p = *argv++;
- if (*p == '-') {
+ if (*p == '-')
+ {
if (!*++p)
bb_show_usage();
- while ((c = *p++)) {
+ while ((c = *p++))
+ {
++flagcount;
- switch (c) {
+ switch (c)
+ {
case 'V':
- bb_error_msg_and_die("%s", VERSION);
+ /*bb_error_msg_and_die("%s", VERSION);*/
+ /* We have to return 0 here and not 1 */
+ printf("%s %s\n",bb_applet_name, VERSION);
+ exit(EXIT_SUCCESS);
case 'v':
verbose = 1;
break;
@@ -2379,138 +2562,169 @@ int hdparm_main(int argc, char **argv)
case 'u':
get_unmask = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_unmask = 1;
- unmask = *p++ - '0';
- }
+ p = check_ptr(p,argc,argv);
+ if((set_unmask = set_flag(p,'1'))==1)
+ unmask = *p++ - '0';
break;
#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA
case 'd':
get_dma = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p >= '0' && *p <= '9') {
- set_dma = 1;
+ p = check_ptr(p,argc,argv);
+ if((set_dma = set_flag(p,'9'))==1)
dma = *p++ - '0';
- }
break;
#endif /* CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA */
case 'n':
get_nowerr = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_nowerr = 1;
- nowerr = *p++ - '0';
- }
+ p = check_ptr(p,argc,argv);
+ if((set_nowerr = set_flag(p,'1'))==1)
+ nowerr = *p++ - '0';
break;
case 'p':
noisy_piomode = noisy;
noisy = 1;
- GET_STRING(set_piomode,piomode);
+ p = check_ptr_v2(p,argc,argv);
+ tmpstr = name;
+ tmpstr[0] = '\0';
+ while (isalnum(*p) && (tmpstr - name) < 31)
+ {
+ tmpstr[0] = *p++;
+ tmpstr[1] = '\0';
+ ++tmpstr;
+ }
+ piomode = translate_xfermode(name);
+ if (piomode == -1)
+ set_piomode = 0;
+ else
+ set_piomode = 1;
break;
case 'r':
get_readonly = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_readonly = 1;
- readonly = *p++ - '0';
- }
+ p = check_ptr(p,argc,argv);
+ if((set_readonly = set_flag(p,'1'))==1)
+ readonly = *p++ - '0';
break;
case 'm':
get_mult = noisy;
noisy = 1;
- GET_NUMBER(set_mult,mult);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_mult = 1;
+ mult = (mult * 10) + (*p++ - '0');
+ }
break;
case 'c':
get_io32bit = noisy;
noisy = 1;
- GET_NUMBER(set_io32bit,io32bit);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_io32bit = 1;
+ io32bit = (io32bit * 10) + (*p++ - '0');
+ }
break;
#ifdef HDIO_DRIVE_CMD
case 'S':
get_standby = noisy;
noisy = 1;
- GET_NUMBER(set_standby,standby_requested);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_standby = 1;
+ standby_requested = (standby_requested * 10) + (*p++ - '0');
+ }
if (!set_standby)
- bb_error_msg("-S: missing value");
+ bb_error_msg("-S: %s", bb_msg_missing_value);
break;
case 'D':
get_defects = noisy;
noisy = 1;
- GET_NUMBER(set_defects,defects);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_defects = 1;
+ defects = (defects * 10) + (*p++ - '0');
+ }
if (!set_defects)
- bb_error_msg("-D: missing value");
+ bb_error_msg("-D: %s", bb_msg_missing_value);
break;
case 'P':
get_prefetch = noisy;
noisy = 1;
- GET_NUMBER(set_prefetch,prefetch);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_prefetch = 1;
+ prefetch = (prefetch * 10) + (*p++ - '0');
+ }
if (!set_prefetch)
- bb_error_msg("-P: missing value");
+ bb_error_msg("-P: %s", bb_msg_missing_value);
break;
case 'X':
get_xfermode = noisy;
noisy = 1;
- GET_STRING(set_xfermode,xfermode_requested);
+ p = check_ptr_v2(p,argc,argv);
+ tmpstr = name;
+ tmpstr[0] = '\0';
+ while (isalnum(*p) && (tmpstr - name) < 31)
+ {
+ tmpstr[0] = *p++;
+ tmpstr[1] = '\0';
+ ++tmpstr;
+ }
+ xfermode_requested = translate_xfermode(name);
+ if (xfermode_requested == -1)
+ set_xfermode = 0;
+ else
+ set_xfermode = 1;
if (!set_xfermode)
- bb_error_msg("-X: missing value");
+ bb_error_msg("-X: %s", bb_msg_missing_value);
break;
case 'K':
get_dkeep = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_dkeep = 1;
- dkeep = *p++ - '0';
- } else
- bb_error_msg("-K: missing value (0/1)");
+ p = check_ptr(p,argc,argv);
+ if((set_dkeep = set_flag(p,'1'))==1)
+ dkeep = *p++ - '0';
+ else
+ bb_error_msg("-K: %s (0/1)", bb_msg_missing_value);
break;
case 'A':
get_lookahead = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_lookahead = 1;
- lookahead = *p++ - '0';
- } else
- bb_error_msg("-A: missing value (0/1)");
+ p = check_ptr(p,argc,argv);
+ if((set_lookahead = set_flag(p,'1'))==1)
+ lookahead = *p++ - '0';
+ else
+ bb_error_msg("-A: %s (0/1)", bb_msg_missing_value);
break;
case 'L':
get_doorlock = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_doorlock = 1;
- doorlock = *p++ - '0';
- } else
- bb_error_msg("-L: missing value (0/1)");
+ p = check_ptr(p,argc,argv);
+ if((set_doorlock = set_flag(p,'1'))==1)
+ doorlock = *p++ - '0';
+ else
+ bb_error_msg("-L: %s (0/1)", bb_msg_missing_value);
break;
case 'W':
get_wcache = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_wcache = 1;
- wcache = *p++ - '0';
- } else
- bb_error_msg("-W: missing value (0/1)");
+ p = check_ptr(p,argc,argv);
+ if((set_wcache = set_flag(p,'1'))==1)
+ wcache = *p++ - '0';
+ else
+ bb_error_msg("-W: %s (0/1)", bb_msg_missing_value);
break;
case 'C':
@@ -2543,21 +2757,15 @@ int hdparm_main(int argc, char **argv)
case 'k':
get_keep = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- set_keep = 1;
- keep = *p++ - '0';
- }
+ p = check_ptr(p,argc,argv);
+ if((set_keep = set_flag(p,'1'))==1)
+ keep = *p++ - '0';
break;
#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
case 'U':
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
-
- if(! p) {
- bb_error_msg_and_die("expected hwif_nr");
- }
+ p = check_ptr(p,argc,argv);
+ if(! p)
+ goto error; /* "expected hwif_nr" */
sscanf(p++, "%i", &hwif);
@@ -2566,28 +2774,24 @@ int hdparm_main(int argc, char **argv)
#endif /* CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF */
#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF
case 'R':
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
-
- if(! p) {
- bb_error_msg_and_die("expected hwif_data");
- }
+ p = check_ptr(p,argc,argv);
+ if(! p)
+ goto error; /* "expected hwif_data" */
sscanf(p++, "%i", &hwif_data);
if (argc && isdigit(**argv))
p = *argv++, --argc;
- else {
- bb_error_msg_and_die("expected hwif_ctrl");
- }
+ else
+ goto error; /* "expected hwif_ctrl" */
sscanf(p, "%i", &hwif_ctrl);
if (argc && isdigit(**argv))
p = *argv++, --argc;
- else {
- bb_error_msg_and_die("expected hwif_irq");
- }
+ else
+error:
+ bb_error_msg_and_die("expected hwif value"); /* "expected hwif_irq" */
sscanf(p, "%i", &hwif_irq);
@@ -2599,10 +2803,16 @@ int hdparm_main(int argc, char **argv)
case 'Q':
get_dma_q = noisy;
noisy = 1;
- neg = 0;
- GET_NUMBER(set_dma_q, dma_q);
- if (neg)
- dma_q = -dma_q;
+ /* neg = 0; */
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_dma_q = 1;
+ dma_q = (dma_q * 10) + (*p++ - '0');
+ }
+ /* what is this for ? as neg = 0 (see above) it seems to do nothing */
+ /*if (neg)
+ dma_q = -dma_q;*/
break;
#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET
case 'w':
@@ -2611,27 +2821,35 @@ int hdparm_main(int argc, char **argv)
#endif /* CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET */
#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF
case 'x':
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- if (*p == '0' || *p == '1') {
- perform_tristate = 1;
- tristate = *p++ - '0';
- } else
- bb_error_msg("-x: missing value (0/1)");
+ p = check_ptr(p,argc,argv);
+ if((perform_tristate = set_flag(p,'1'))==1)
+ tristate = *p++ - '0';
+ else
+ bb_error_msg("-x: %s (0/1)", bb_msg_missing_value);
break;
#endif /* CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF */
case 'a':
get_readahead = noisy;
noisy = 1;
- GET_NUMBER(set_readahead,readahead);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_readahead = 1;
+ readahead = (readahead * 10) + (*p++ - '0');
+ }
break;
case 'B':
get_apmmode = noisy;
noisy = 1;
- GET_NUMBER(set_apmmode,apmmode);
+ p = check_ptr(p,argc,argv);
+ while (isdigit(*p))
+ {
+ set_apmmode = 1;
+ apmmode = (io32bit * 10) + (*p++ - '0');
+ }
if (!set_apmmode)
- printf("-B: missing value (1-255)");
+ printf("-B: %s (1-255)", bb_msg_missing_value);
break;
case 't':
do_timings = 1;
@@ -2645,18 +2863,9 @@ int hdparm_main(int argc, char **argv)
case 'b':
get_busstate = noisy;
noisy = 1;
- if (!*p && argc && isdigit(**argv))
- p = *argv++, --argc;
- switch (*p) {
- case '0':
- case '1':
- case '2':
- set_busstate = 1;
- busstate = *p++ - '0';
- break;
- default:
- break;
- }
+ p = check_ptr(p,argc,argv);
+ if((set_busstate = set_flag(p,'2'))==1)
+ busstate = *p++ - '0';
break;
#endif
case 'h':
@@ -2666,9 +2875,9 @@ int hdparm_main(int argc, char **argv)
}
if (!argc)
bb_show_usage();
- } else {
- process_dev (p);
}
+ else
+ process_dev (p);
}
return 0 ;
}