summaryrefslogtreecommitdiff
path: root/loginutils/getty.c
diff options
context:
space:
mode:
Diffstat (limited to 'loginutils/getty.c')
-rw-r--r--loginutils/getty.c1157
1 files changed, 1157 insertions, 0 deletions
diff --git a/loginutils/getty.c b/loginutils/getty.c
new file mode 100644
index 0000000..2144c95
--- /dev/null
+++ b/loginutils/getty.c
@@ -0,0 +1,1157 @@
+/* vi: set sw=4 ts=4: */
+/* agetty.c - another getty program for Linux. By W. Z. Venema 1989
+ Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
+ This program is freely distributable. The entire man-page used to
+ be here. Now read the real man-page agetty.8 instead.
+
+ -f option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
+
+ 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org>
+ - added Native Language Support
+
+ 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
+ - enable hardware flow control before displaying /etc/issue
+
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/signal.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <utmp.h>
+#include <getopt.h>
+#include <termios.h>
+#include "busybox.h"
+
+#define _PATH_LOGIN "/bin/login"
+
+#ifdef linux
+#include <sys/param.h>
+#define USE_SYSLOG
+#endif
+
+extern void updwtmp(const char *filename, const struct utmp *ut);
+
+ /* If USE_SYSLOG is undefined all diagnostics go directly to /dev/console. */
+#ifdef USE_SYSLOG
+#include <syslog.h>
+#endif
+
+
+ /*
+ * Some heuristics to find out what environment we are in: if it is not
+ * System V, assume it is SunOS 4.
+ */
+
+#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
+#define SYSV_STYLE /* select System V style getty */
+#endif
+
+ /*
+ * Things you may want to modify.
+ *
+ * If ISSUE is not defined, agetty will never display the contents of the
+ * /etc/issue file. You will not want to spit out large "issue" files at the
+ * wrong baud rate. Relevant for System V only.
+ *
+ * You may disagree with the default line-editing etc. characters defined
+ * below. Note, however, that DEL cannot be used for interrupt generation
+ * and for line editing at the same time.
+ */
+
+#ifdef SYSV_STYLE
+#define ISSUE "/etc/issue" /* displayed before the login prompt */
+#include <sys/utsname.h>
+#include <time.h>
+#endif
+
+#define LOGIN " login: " /* login prompt */
+
+/* Some shorthands for control characters. */
+
+#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
+#define CR CTL('M') /* carriage return */
+#define NL CTL('J') /* line feed */
+#define BS CTL('H') /* back space */
+#define DEL CTL('?') /* delete */
+
+/* Defaults for line-editing etc. characters; you may want to change this. */
+
+#define DEF_ERASE DEL /* default erase character */
+#define DEF_INTR CTL('C') /* default interrupt character */
+#define DEF_QUIT CTL('\\') /* default quit char */
+#define DEF_KILL CTL('U') /* default kill char */
+#define DEF_EOF CTL('D') /* default EOF char */
+#define DEF_EOL 0
+#define DEF_SWITCH 0 /* default switch char */
+
+ /*
+ * SunOS 4.1.1 termio is broken. We must use the termios stuff instead,
+ * because the termio -> termios translation does not clear the termios
+ * CIBAUD bits. Therefore, the tty driver would sometimes report that input
+ * baud rate != output baud rate. I did not notice that problem with SunOS
+ * 4.1. We will use termios where available, and termio otherwise.
+ */
+
+/* linux 0.12 termio is broken too, if we use it c_cc[VERASE] isn't set
+ properly, but all is well if we use termios?! */
+
+#ifdef TCGETS
+#undef TCGETA
+#undef TCSETA
+#undef TCSETAW
+#define termio termios
+#define TCGETA TCGETS
+#define TCSETA TCSETS
+#define TCSETAW TCSETSW
+#endif
+
+ /*
+ * This program tries to not use the standard-i/o library. This keeps the
+ * executable small on systems that do not have shared libraries (System V
+ * Release <3).
+ */
+#ifndef BUFSIZ
+#define BUFSIZ 1024
+#endif
+
+ /*
+ * When multiple baud rates are specified on the command line, the first one
+ * we will try is the first one specified.
+ */
+
+#define FIRST_SPEED 0
+
+/* Storage for command-line options. */
+
+#define MAX_SPEED 10 /* max. nr. of baud rates */
+
+struct options {
+ int flags; /* toggle switches, see below */
+ int timeout; /* time-out period */
+ char *login; /* login program */
+ char *tty; /* name of tty */
+ char *initstring; /* modem init string */
+ char *issue; /* alternative issue file */
+ int numspeed; /* number of baud rates to try */
+ int speeds[MAX_SPEED]; /* baud rates to be tried */
+};
+
+#define F_PARSE (1<<0) /* process modem status messages */
+#define F_ISSUE (1<<1) /* display /etc/issue */
+#define F_RTSCTS (1<<2) /* enable RTS/CTS flow control */
+#define F_LOCAL (1<<3) /* force local */
+#define F_INITSTRING (1<<4) /* initstring is set */
+#define F_WAITCRLF (1<<5) /* wait for CR or LF */
+#define F_CUSTISSUE (1<<6) /* give alternative issue file */
+#define F_NOPROMPT (1<<7) /* don't ask for login name! */
+
+/* Storage for things detected while the login name was read. */
+
+struct chardata {
+ int erase; /* erase character */
+ int kill; /* kill character */
+ int eol; /* end-of-line character */
+ int parity; /* what parity did we see */
+ int capslock; /* upper case without lower case */
+};
+
+/* Initial values for the above. */
+
+struct chardata init_chardata = {
+ DEF_ERASE, /* default erase character */
+ DEF_KILL, /* default kill character */
+ 13, /* default eol char */
+ 0, /* space parity */
+ 0, /* no capslock */
+};
+
+struct Speedtab {
+ long speed;
+ int code;
+};
+
+static struct Speedtab speedtab[] = {
+ {50, B50},
+ {75, B75},
+ {110, B110},
+ {134, B134},
+ {150, B150},
+ {200, B200},
+ {300, B300},
+ {600, B600},
+ {1200, B1200},
+ {1800, B1800},
+ {2400, B2400},
+ {4800, B4800},
+ {9600, B9600},
+#ifdef B19200
+ {19200, B19200},
+#endif
+#ifdef B38400
+ {38400, B38400},
+#endif
+#ifdef EXTA
+ {19200, EXTA},
+#endif
+#ifdef EXTB
+ {38400, EXTB},
+#endif
+#ifdef B57600
+ {57600, B57600},
+#endif
+#ifdef B115200
+ {115200, B115200},
+#endif
+#ifdef B230400
+ {230400, B230400},
+#endif
+ {0, 0},
+};
+
+static void parse_args(int argc, char **argv, struct options *op);
+static void parse_speeds(struct options *op, char *arg);
+static void update_utmp(char *line);
+static void open_tty(char *tty, struct termio *tp, int local);
+static void termio_init(struct termio *tp, int speed, struct options *op);
+static void auto_baud(struct termio *tp);
+static void do_prompt(struct options *op, struct termio *tp);
+static void next_speed(struct termio *tp, struct options *op);
+static char *get_logname(struct options *op, struct chardata *cp,
+
+ struct termio *tp);
+static void termio_final(struct options *op, struct termio *tp,
+
+ struct chardata *cp);
+static int caps_lock(const char *s);
+static int bcode(const char *s);
+static void error(const char *fmt, ...);
+
+/* The following is used for understandable diagnostics. */
+
+/* Fake hostname for ut_host specified on command line. */
+static char *fakehost = NULL;
+
+/* ... */
+#ifdef DEBUGGING
+#define debug(s) fprintf(dbf,s); fflush(dbf)
+#define DEBUGTERM "/dev/ttyp0"
+FILE *dbf;
+#else
+#define debug(s) /* nothing */
+#endif
+
+int getty_main(int argc, char **argv)
+{
+ char *logname = NULL; /* login name, given to /bin/login */
+ struct chardata chardata; /* set by get_logname() */
+ struct termio termio; /* terminal mode bits */
+ static struct options options = {
+ F_ISSUE, /* show /etc/issue (SYSV_STYLE) */
+ 0, /* no timeout */
+ _PATH_LOGIN, /* default login program */
+ "tty1", /* default tty line */
+ "", /* modem init string */
+ ISSUE, /* default issue file */
+ 0, /* no baud rates known yet */
+ };
+
+#ifdef DEBUGGING
+ dbf = xfopen(DEBUGTERM, "w");
+
+ {
+ int i;
+
+ for (i = 1; i < argc; i++) {
+ debug(argv[i]);
+ debug("\n");
+ }
+ }
+#endif
+
+ /* Parse command-line arguments. */
+
+ parse_args(argc, argv, &options);
+
+#ifdef __linux__
+ setsid();
+#endif
+
+ /* Update the utmp file. */
+
+#ifdef SYSV_STYLE
+ update_utmp(options.tty);
+#endif
+
+ debug("calling open_tty\n");
+ /* Open the tty as standard { input, output, error }. */
+ open_tty(options.tty, &termio, options.flags & F_LOCAL);
+
+#ifdef __linux__
+ {
+ int iv;
+
+ iv = getpid();
+ if (ioctl(0, TIOCSPGRP, &iv) < 0)
+ perror_msg("ioctl() TIOCSPGRP call failed");
+ }
+#endif
+ /* Initialize the termio settings (raw mode, eight-bit, blocking i/o). */
+ debug("calling termio_init\n");
+ termio_init(&termio, options.speeds[FIRST_SPEED], &options);
+
+ /* write the modem init string and DON'T flush the buffers */
+ if (options.flags & F_INITSTRING) {
+ debug("writing init string\n");
+ write(1, options.initstring, strlen(options.initstring));
+ }
+
+ if (!(options.flags & F_LOCAL)) {
+ /* go to blocking write mode unless -L is specified */
+ fcntl(1, F_SETFL, fcntl(1, F_GETFL, 0) & ~O_NONBLOCK);
+ }
+
+ /* Optionally detect the baud rate from the modem status message. */
+ debug("before autobaud\n");
+ if (options.flags & F_PARSE)
+ auto_baud(&termio);
+
+ /* Set the optional timer. */
+ if (options.timeout)
+ (void) alarm((unsigned) options.timeout);
+
+ /* optionally wait for CR or LF before writing /etc/issue */
+ if (options.flags & F_WAITCRLF) {
+ char ch;
+
+ debug("waiting for cr-lf\n");
+ while (read(0, &ch, 1) == 1) {
+ ch &= 0x7f; /* strip "parity bit" */
+#ifdef DEBUGGING
+ fprintf(dbf, "read %c\n", ch);
+#endif
+ if (ch == '\n' || ch == '\r')
+ break;
+ }
+ }
+
+ chardata = init_chardata;
+ if (!(options.flags & F_NOPROMPT)) {
+ /* Read the login name. */
+ debug("reading login name\n");
+ /* while ((logname = get_logname(&options, &chardata, &termio)) == 0) */
+ while ((logname = get_logname(&options, &chardata, &termio)) ==
+ NULL) next_speed(&termio, &options);
+ }
+
+ /* Disable timer. */
+
+ if (options.timeout)
+ (void) alarm(0);
+
+ /* Finalize the termio settings. */
+
+ termio_final(&options, &termio, &chardata);
+
+ /* Now the newline character should be properly written. */
+
+ (void) write(1, "\n", 1);
+
+ /* Let the login program take care of password validation. */
+
+ (void) execl(options.login, options.login, "--", logname, (char *) 0);
+ error("%s: can't exec %s: %m", options.tty, options.login);
+ return (0); /* quiet GCC */
+}
+
+/* parse-args - parse command-line arguments */
+
+static void parse_args(int argc, char **argv, struct options *op)
+{
+ extern char *optarg; /* getopt */
+ extern int optind; /* getopt */
+ int c;
+
+ while (isascii(c = getopt(argc, argv, "I:LH:f:hil:mt:wn"))) {
+ switch (c) {
+ case 'I':
+ if (!(op->initstring = strdup(optarg))) {
+ error("can't malloc initstring");
+ break;
+ }
+ {
+ char ch, *p, *q;
+ int i;
+
+ /* copy optarg into op->initstring decoding \ddd
+ octal codes into chars */
+ q = op->initstring;
+ p = optarg;
+ while (*p) {
+ if (*p == '\\') { /* know \\ means \ */
+ p++;
+ if (*p == '\\') {
+ ch = '\\';
+ p++;
+ } else { /* handle \000 - \177 */
+ ch = 0;
+ for (i = 1; i <= 3; i++) {
+ if (*p >= '0' && *p <= '7') {
+ ch <<= 3;
+ ch += *p - '0';
+ p++;
+ } else
+ break;
+ }
+ }
+ *q++ = ch;
+ } else {
+ *q++ = *p++;
+ }
+ }
+ *q = '\0';
+ }
+ op->flags |= F_INITSTRING;
+ break;
+
+ case 'L': /* force local */
+ op->flags |= F_LOCAL;
+ break;
+ case 'H': /* fake login host */
+ fakehost = optarg;
+ break;
+ case 'f': /* custom issue file */
+ op->flags |= F_CUSTISSUE;
+ op->issue = optarg;
+ break;
+ case 'h': /* enable h/w flow control */
+ op->flags |= F_RTSCTS;
+ break;
+ case 'i': /* do not show /etc/issue */
+ op->flags &= ~F_ISSUE;
+ break;
+ case 'l':
+ op->login = optarg; /* non-default login program */
+ break;
+ case 'm': /* parse modem status message */
+ op->flags |= F_PARSE;
+ break;
+ case 'n':
+ op->flags |= F_NOPROMPT;
+ break;
+ case 't': /* time out */
+ if ((op->timeout = atoi(optarg)) <= 0)
+ error("bad timeout value: %s", optarg);
+ break;
+ case 'w':
+ op->flags |= F_WAITCRLF;
+ break;
+ default:
+ show_usage();
+ }
+ }
+ debug("after getopt loop\n");
+ if (argc < optind + 2) /* check parameter count */
+ show_usage();
+
+ /* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
+ if ('0' <= argv[optind][0] && argv[optind][0] <= '9') {
+ /* a number first, assume it's a speed (BSD style) */
+ parse_speeds(op, argv[optind++]); /* baud rate(s) */
+ op->tty = argv[optind]; /* tty name */
+ } else {
+ op->tty = argv[optind++]; /* tty name */
+ parse_speeds(op, argv[optind]); /* baud rate(s) */
+ }
+
+ optind++;
+ if (argc > optind && argv[optind])
+ setenv("TERM", argv[optind], 1);
+
+ debug("exiting parseargs\n");
+}
+
+/* parse_speeds - parse alternate baud rates */
+
+static void parse_speeds(struct options *op, char *arg)
+{
+ char *cp;
+
+ debug("entered parse_speeds\n");
+ for (cp = strtok(arg, ","); cp != 0; cp = strtok((char *) 0, ",")) {
+ if ((op->speeds[op->numspeed++] = bcode(cp)) <= 0)
+ error("bad speed: %s", cp);
+ if (op->numspeed > MAX_SPEED)
+ error("too many alternate speeds");
+ }
+ debug("exiting parsespeeds\n");
+}
+
+#ifdef SYSV_STYLE
+
+/* update_utmp - update our utmp entry */
+static void update_utmp(char *line)
+{
+ struct utmp ut;
+ struct utmp *utp;
+ time_t t;
+ int mypid = getpid();
+#if ! (__GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1))
+ struct flock lock;
+#endif
+
+ /*
+ * The utmp file holds miscellaneous information about things started by
+ * /sbin/init and other system-related events. Our purpose is to update
+ * the utmp entry for the current process, in particular the process type
+ * and the tty line we are listening to. Return successfully only if the
+ * utmp file can be opened for update, and if we are able to find our
+ * entry in the utmp file.
+ */
+ utmpname(_PATH_UTMP);
+ setutent();
+ while ((utp = getutent())
+ && !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid)) /* nothing */
+ ;
+
+ if (utp) {
+ memcpy(&ut, utp, sizeof(ut));
+ } else {
+ /* some inits don't initialize utmp... */
+ memset(&ut, 0, sizeof(ut));
+ strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
+ }
+ /*endutent(); */
+
+ strncpy(ut.ut_user, "LOGIN", sizeof(ut.ut_user));
+ strncpy(ut.ut_line, line, sizeof(ut.ut_line));
+ if (fakehost)
+ strncpy(ut.ut_host, fakehost, sizeof(ut.ut_host));
+ time(&t);
+ ut.ut_time = t;
+ ut.ut_type = LOGIN_PROCESS;
+ ut.ut_pid = mypid;
+
+ pututline(&ut);
+ endutent();
+
+ {
+ updwtmp(_PATH_WTMP, &ut);
+ }
+}
+
+#endif
+
+/* open_tty - set up tty as standard { input, output, error } */
+static void open_tty(char *tty, struct termio *tp, int local)
+{
+ /* Get rid of the present standard { output, error} if any. */
+
+ (void) close(1);
+ (void) close(2);
+ errno = 0; /* ignore above errors */
+
+ /* Set up new standard input, unless we are given an already opened port. */
+
+ if (strcmp(tty, "-")) {
+ struct stat st;
+
+ /* Sanity checks... */
+
+ if (chdir("/dev"))
+ error("/dev: chdir() failed: %m");
+ if (stat(tty, &st) < 0)
+ error("/dev/%s: %m", tty);
+ if ((st.st_mode & S_IFMT) != S_IFCHR)
+ error("/dev/%s: not a character device", tty);
+
+ /* Open the tty as standard input. */
+
+ (void) close(0);
+ errno = 0; /* ignore close(2) errors */
+
+ debug("open(2)\n");
+ if (open(tty, O_RDWR | O_NONBLOCK, 0) != 0)
+ error("/dev/%s: cannot open as standard input: %m", tty);
+
+ } else {
+
+ /*
+ * Standard input should already be connected to an open port. Make
+ * sure it is open for read/write.
+ */
+
+ if ((fcntl(0, F_GETFL, 0) & O_RDWR) != O_RDWR)
+ error("%s: not open for read/write", tty);
+ }
+
+ /* Set up standard output and standard error file descriptors. */
+ debug("duping\n");
+ if (dup(0) != 1 || dup(0) != 2) /* set up stdout and stderr */
+ error("%s: dup problem: %m", tty); /* we have a problem */
+
+ /*
+ * The following ioctl will fail if stdin is not a tty, but also when
+ * there is noise on the modem control lines. In the latter case, the
+ * common course of action is (1) fix your cables (2) give the modem more
+ * time to properly reset after hanging up. SunOS users can achieve (2)
+ * by patching the SunOS kernel variable "zsadtrlow" to a larger value;
+ * 5 seconds seems to be a good value.
+ */
+
+ if (ioctl(0, TCGETA, tp) < 0)
+ error("%s: ioctl: %m", tty);
+
+ /*
+ * It seems to be a terminal. Set proper protections and ownership. Mode
+ * 0622 is suitable for SYSV <4 because /bin/login does not change
+ * protections. SunOS 4 login will change the protections to 0620 (write
+ * access for group tty) after the login has succeeded.
+ */
+
+#ifdef DEBIAN
+ {
+ /* tty to root.dialout 660 */
+ struct group *gr;
+ int id;
+
+ id = (gr = getgrnam("dialout")) ? gr->gr_gid : 0;
+ chown(tty, 0, id);
+ chmod(tty, 0660);
+
+ /* vcs,vcsa to root.sys 600 */
+ if (!strncmp(tty, "tty", 3) && isdigit(tty[3])) {
+ char *vcs, *vcsa;
+
+ if (!(vcs = strdup(tty)))
+ error("Can't malloc for vcs");
+ if (!(vcsa = malloc(strlen(tty) + 2)))
+ error("Can't malloc for vcsa");
+ strcpy(vcs, "vcs");
+ strcpy(vcs + 3, tty + 3);
+ strcpy(vcsa, "vcsa");
+ strcpy(vcsa + 4, tty + 3);
+
+ id = (gr = getgrnam("sys")) ? gr->gr_gid : 0;
+ chown(vcs, 0, id);
+ chmod(vcs, 0600);
+ chown(vcsa, 0, id);
+ chmod(vcs, 0600);
+
+ free(vcs);
+ free(vcsa);
+ }
+ }
+#else
+ (void) chown(tty, 0, 0); /* root, sys */
+ (void) chmod(tty, 0622); /* crw--w--w- */
+ errno = 0; /* ignore above errors */
+#endif
+}
+
+/* termio_init - initialize termio settings */
+
+static void termio_init(struct termio *tp, int speed, struct options *op)
+{
+
+ /*
+ * Initial termio settings: 8-bit characters, raw-mode, blocking i/o.
+ * Special characters are set after we have read the login name; all
+ * reads will be done in raw mode anyway. Errors will be dealt with
+ * lateron.
+ */
+#ifdef __linux__
+ /* flush input and output queues, important for modems! */
+ (void) ioctl(0, TCFLSH, TCIOFLUSH);
+#endif
+
+ tp->c_cflag = CS8 | HUPCL | CREAD | speed;
+ if (op->flags & F_LOCAL) {
+ tp->c_cflag |= CLOCAL;
+ }
+
+ tp->c_iflag = tp->c_lflag = tp->c_oflag = tp->c_line = 0;
+ tp->c_cc[VMIN] = 1;
+ tp->c_cc[VTIME] = 0;
+
+ /* Optionally enable hardware flow control */
+
+#ifdef CRTSCTS
+ if (op->flags & F_RTSCTS)
+ tp->c_cflag |= CRTSCTS;
+#endif
+
+ (void) ioctl(0, TCSETA, tp);
+
+ /* go to blocking input even in local mode */
+ fcntl(0, F_SETFL, fcntl(0, F_GETFL, 0) & ~O_NONBLOCK);
+
+ debug("term_io 2\n");
+}
+
+/* auto_baud - extract baud rate from modem status message */
+static void auto_baud(struct termio *tp)
+{
+ int speed;
+ int vmin;
+ unsigned iflag;
+ char buf[BUFSIZ];
+ char *bp;
+ int nread;
+
+ /*
+ * This works only if the modem produces its status code AFTER raising
+ * the DCD line, and if the computer is fast enough to set the proper
+ * baud rate before the message has gone by. We expect a message of the
+ * following format:
+ *
+ * <junk><number><junk>
+ *
+ * The number is interpreted as the baud rate of the incoming call. If the
+ * modem does not tell us the baud rate within one second, we will keep
+ * using the current baud rate. It is advisable to enable BREAK
+ * processing (comma-separated list of baud rates) if the processing of
+ * modem status messages is enabled.
+ */
+
+ /*
+ * Use 7-bit characters, don't block if input queue is empty. Errors will
+ * be dealt with lateron.
+ */
+
+ iflag = tp->c_iflag;
+ tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
+ vmin = tp->c_cc[VMIN];
+ tp->c_cc[VMIN] = 0; /* don't block if queue empty */
+ (void) ioctl(0, TCSETA, tp);
+
+ /*
+ * Wait for a while, then read everything the modem has said so far and
+ * try to extract the speed of the dial-in call.
+ */
+
+ (void) sleep(1);
+ if ((nread = read(0, buf, sizeof(buf) - 1)) > 0) {
+ buf[nread] = '\0';
+ for (bp = buf; bp < buf + nread; bp++) {
+ if (isascii(*bp) && isdigit(*bp)) {
+ if ((speed = bcode(bp))) {
+ tp->c_cflag &= ~CBAUD;
+ tp->c_cflag |= speed;
+ }
+ break;
+ }
+ }
+ }
+ /* Restore terminal settings. Errors will be dealt with lateron. */
+
+ tp->c_iflag = iflag;
+ tp->c_cc[VMIN] = vmin;
+ (void) ioctl(0, TCSETA, tp);
+}
+
+/* do_prompt - show login prompt, optionally preceded by /etc/issue contents */
+static void do_prompt(struct options *op, struct termio *tp)
+{
+#ifdef ISSUE
+ FILE *fd;
+ int oflag;
+ int c;
+ struct utsname uts;
+
+ (void) uname(&uts);
+#endif
+
+ (void) write(1, "\r\n", 2); /* start a new line */
+#ifdef ISSUE /* optional: show /etc/issue */
+ if ((op->flags & F_ISSUE) && (fd = fopen(op->issue, "r"))) {
+ oflag = tp->c_oflag; /* save current setting */
+ tp->c_oflag |= (ONLCR | OPOST); /* map NL in output to CR-NL */
+ (void) ioctl(0, TCSETAW, tp);
+
+
+ while ((c = getc(fd)) != EOF) {
+ if (c == '\\') {
+ c = getc(fd);
+
+ switch (c) {
+ case 's':
+ (void) printf("%s", uts.sysname);
+ break;
+
+ case 'n':
+ (void) printf("%s", uts.nodename);
+ break;
+
+ case 'r':
+ (void) printf("%s", uts.release);
+ break;
+
+ case 'v':
+ (void) printf("%s", uts.version);
+ break;
+
+ case 'm':
+ (void) printf("%s", uts.machine);
+ break;
+
+ case 'o':
+ {
+ char domainname[256];
+
+ getdomainname(domainname, sizeof(domainname));
+ domainname[sizeof(domainname) - 1] = '\0';
+ printf("%s", domainname);
+ }
+ break;
+
+ case 'd':
+ case 't':
+ {
+ char *weekday[] = { "Sun", "Mon", "Tue", "Wed", "Thu",
+ "Fri", "Sat"
+ };
+ char *month[] = { "Jan", "Feb", "Mar", "Apr", "May",
+ "Jun", "Jul", "Aug", "Sep", "Oct",
+ "Nov", "Dec"
+ };
+ time_t now;
+ struct tm *tm;
+
+ (void) time(&now);
+ tm = localtime(&now);
+
+ if (c == 'd')
+ (void) printf("%s %s %d %d",
+ weekday[tm->tm_wday],
+ month[tm->tm_mon], tm->tm_mday,
+ tm->tm_year <
+ 70 ? tm->tm_year +
+ 2000 : tm->tm_year + 1900);
+ else
+ (void) printf("%02d:%02d:%02d", tm->tm_hour,
+ tm->tm_min, tm->tm_sec);
+
+ break;
+ }
+
+ case 'l':
+ (void) printf("%s", op->tty);
+ break;
+
+ case 'b':
+ {
+ int i;
+
+ for (i = 0; speedtab[i].speed; i++) {
+ if (speedtab[i].code == (tp->c_cflag & CBAUD)) {
+ printf("%ld", speedtab[i].speed);
+ break;
+ }
+ }
+ break;
+ }
+ case 'u':
+ case 'U':
+ {
+ int users = 0;
+ struct utmp *ut;
+
+ setutent();
+ while ((ut = getutent()))
+ if (ut->ut_type == USER_PROCESS)
+ users++;
+ endutent();
+ printf("%d ", users);
+ if (c == 'U')
+ printf((users == 1) ? "user" : "users");
+ break;
+ }
+ default:
+ (void) putchar(c);
+ }
+ } else
+ (void) putchar(c);
+ }
+ fflush(stdout);
+
+ tp->c_oflag = oflag; /* restore settings */
+ (void) ioctl(0, TCSETAW, tp); /* wait till output is gone */
+ (void) fclose(fd);
+ }
+#endif
+#ifdef __linux__
+ {
+ char hn[MAXHOSTNAMELEN + 1];
+
+ (void) gethostname(hn, MAXHOSTNAMELEN);
+ write(1, hn, strlen(hn));
+ }
+#endif
+ (void) write(1, LOGIN, sizeof(LOGIN) - 1); /* always show login prompt */
+}
+
+/* next_speed - select next baud rate */
+static void next_speed(struct termio *tp, struct options *op)
+{
+ static int baud_index = FIRST_SPEED; /* current speed index */
+
+ baud_index = (baud_index + 1) % op->numspeed;
+ tp->c_cflag &= ~CBAUD;
+ tp->c_cflag |= op->speeds[baud_index];
+ (void) ioctl(0, TCSETA, tp);
+}
+
+/* get_logname - get user name, establish parity, speed, erase, kill, eol */
+/* return NULL on failure, logname on success */
+static char *get_logname(struct options *op, struct chardata *cp, struct termio *tp)
+{
+ static char logname[BUFSIZ];
+ char *bp;
+ char c; /* input character, full eight bits */
+ char ascval; /* low 7 bits of input character */
+ int bits; /* # of "1" bits per character */
+ int mask; /* mask with 1 bit up */
+ static char *erase[] = { /* backspace-space-backspace */
+ "\010\040\010", /* space parity */
+ "\010\040\010", /* odd parity */
+ "\210\240\210", /* even parity */
+ "\210\240\210", /* no parity */
+ };
+
+ /* Initialize kill, erase, parity etc. (also after switching speeds). */
+
+ *cp = init_chardata;
+
+ /* Flush pending input (esp. after parsing or switching the baud rate). */
+
+ (void) sleep(1);
+ (void) ioctl(0, TCFLSH, TCIFLUSH);
+
+ /* Prompt for and read a login name. */
+
+ for (*logname = 0; *logname == 0; /* void */ ) {
+
+ /* Write issue file and prompt, with "parity" bit == 0. */
+
+ do_prompt(op, tp);
+
+ /* Read name, watch for break, parity, erase, kill, end-of-line. */
+
+ for (bp = logname, cp->eol = 0; cp->eol == 0; /* void */ ) {
+
+ /* Do not report trivial EINTR/EIO errors. */
+
+ if (read(0, &c, 1) < 1) {
+ if (errno == EINTR || errno == EIO)
+ exit(0);
+ error("%s: read: %m", op->tty);
+ }
+ /* Do BREAK handling elsewhere. */
+
+ if ((c == 0) && op->numspeed > 1)
+ /* return (0); */
+ return NULL;
+
+ /* Do parity bit handling. */
+
+ if (c != (ascval = (c & 0177))) { /* "parity" bit on ? */
+ for (bits = 1, mask = 1; mask & 0177; mask <<= 1)
+ if (mask & ascval)
+ bits++; /* count "1" bits */
+ cp->parity |= ((bits & 1) ? 1 : 2);
+ }
+ /* Do erase, kill and end-of-line processing. */
+
+ switch (ascval) {
+ case CR:
+ case NL:
+ *bp = 0; /* terminate logname */
+ cp->eol = ascval; /* set end-of-line char */
+ break;
+ case BS:
+ case DEL:
+ case '#':
+ cp->erase = ascval; /* set erase character */
+ if (bp > logname) {
+ (void) write(1, erase[cp->parity], 3);
+ bp--;
+ }
+ break;
+ case CTL('U'):
+ case '@':
+ cp->kill = ascval; /* set kill character */
+ while (bp > logname) {
+ (void) write(1, erase[cp->parity], 3);
+ bp--;
+ }
+ break;
+ case CTL('D'):
+ exit(0);
+ default:
+ if (!isascii(ascval) || !isprint(ascval)) {
+ /* ignore garbage characters */ ;
+ } else if (bp - logname >= sizeof(logname) - 1) {
+ error("%s: input overrun", op->tty);
+ } else {
+ (void) write(1, &c, 1); /* echo the character */
+ *bp++ = ascval; /* and store it */
+ }
+ break;
+ }
+ }
+ }
+ /* Handle names with upper case and no lower case. */
+
+ if ((cp->capslock = caps_lock(logname))) {
+ for (bp = logname; *bp; bp++)
+ if (isupper(*bp))
+ *bp = tolower(*bp); /* map name to lower case */
+ }
+ return (logname);
+}
+
+/* termio_final - set the final tty mode bits */
+static void termio_final(struct options *op, struct termio *tp, struct chardata *cp)
+{
+ /* General terminal-independent stuff. */
+
+ tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
+ tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
+ /* no longer| ECHOCTL | ECHOPRT */
+ tp->c_oflag |= OPOST;
+ /* tp->c_cflag = 0; */
+ tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
+ tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
+ tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
+ tp->c_cc[VEOL] = DEF_EOL;
+#ifdef __linux__
+ tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
+#else
+ tp->c_cc[VSWTCH] = DEF_SWITCH; /* default switch character */
+#endif
+
+ /* Account for special characters seen in input. */
+
+ if (cp->eol == CR) {
+ tp->c_iflag |= ICRNL; /* map CR in input to NL */
+ tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
+ }
+ tp->c_cc[VERASE] = cp->erase; /* set erase character */
+ tp->c_cc[VKILL] = cp->kill; /* set kill character */
+
+ /* Account for the presence or absence of parity bits in input. */
+
+ switch (cp->parity) {
+ case 0: /* space (always 0) parity */
+ break;
+ case 1: /* odd parity */
+ tp->c_cflag |= PARODD;
+ /* FALLTHROUGH */
+ case 2: /* even parity */
+ tp->c_cflag |= PARENB;
+ tp->c_iflag |= INPCK | ISTRIP;
+ /* FALLTHROUGH */
+ case (1 | 2): /* no parity bit */
+ tp->c_cflag &= ~CSIZE;
+ tp->c_cflag |= CS7;
+ break;
+ }
+ /* Account for upper case without lower case. */
+
+ if (cp->capslock) {
+ tp->c_iflag |= IUCLC;
+ tp->c_lflag |= XCASE;
+ tp->c_oflag |= OLCUC;
+ }
+ /* Optionally enable hardware flow control */
+
+#ifdef CRTSCTS
+ if (op->flags & F_RTSCTS)
+ tp->c_cflag |= CRTSCTS;
+#endif
+
+ /* Finally, make the new settings effective */
+
+ if (ioctl(0, TCSETA, tp) < 0)
+ error("%s: ioctl: TCSETA: %m", op->tty);
+}
+
+/* caps_lock - string contains upper case without lower case */
+/* returns 1 if true, 0 if false */
+static int caps_lock(const char *s)
+{
+ int capslock;
+
+ for (capslock = 0; *s; s++) {
+ if (islower(*s))
+ return (0);
+ if (capslock == 0)
+ capslock = isupper(*s);
+ }
+ return (capslock);
+}
+
+/* bcode - convert speed string to speed code; return 0 on failure */
+static int bcode(const char *s)
+{
+ struct Speedtab *sp;
+ long speed = atol(s);
+
+ for (sp = speedtab; sp->speed; sp++)
+ if (sp->speed == speed)
+ return (sp->code);
+ return (0);
+}
+
+/* error - report errors to console or syslog; only understands %s and %m */
+
+#define str2cpy(b,s1,s2) strcat(strcpy(b,s1),s2)
+
+/*
+ * output error messages
+ */
+static void error(const char *fmt, ...)
+{
+ va_list va_alist;
+ char buf[256], *bp;
+
+#ifndef USE_SYSLOG
+ int fd;
+#endif
+
+#ifdef USE_SYSLOG
+ buf[0] = '\0';
+ bp = buf;
+#else
+ strncpy(buf, applet_name, 256);
+ strncat(buf, ": ", 256);
+ buf[255] = 0;
+ bp = buf + strlen(buf);
+#endif
+
+ va_start(va_alist, fmt);
+ vsnprintf(bp, 256 - strlen(buf), fmt, va_alist);
+ buf[255] = 0;
+ va_end(va_alist);
+
+#ifdef USE_SYSLOG
+ syslog_msg(LOG_AUTH, LOG_ERR, buf);
+#else
+ strncat(bp, "\r\n", 256 - strlen(buf));
+ buf[255] = 0;
+ if ((fd = open("/dev/console", 1)) >= 0) {
+ write(fd, buf, strlen(buf));
+ close(fd);
+ }
+#endif
+ (void) sleep((unsigned) 10); /* be kind to init(8) */
+ exit(1);
+}