summaryrefslogtreecommitdiff
path: root/include/usage.src.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/usage.src.h')
-rw-r--r--include/usage.src.h5263
1 files changed, 5263 insertions, 0 deletions
diff --git a/include/usage.src.h b/include/usage.src.h
new file mode 100644
index 0000000..78c0a0f
--- /dev/null
+++ b/include/usage.src.h
@@ -0,0 +1,5263 @@
+/* vi: set sw=8 ts=8: */
+/*
+ * This file suffers from chronically incorrect tabification
+ * of messages. Before editing this file:
+ * 1. Switch you editor to 8-space tab mode.
+ * 2. Do not use \t in messages, use real tab character.
+ * 3. Start each source line with message as follows:
+ * |<7 spaces>"text with tabs"....
+ * or
+ * |<5 spaces>"\ntext with tabs"....
+ */
+#ifndef BB_USAGE_H
+#define BB_USAGE_H 1
+
+
+#define NOUSAGE_STR "\b"
+
+INSERT
+
+#define acpid_trivial_usage \
+ "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..."
+#define acpid_full_usage "\n\n" \
+ "Listen to ACPI events and spawn specific helpers on event arrival\n" \
+ "\nOptions:" \
+ "\n -d Don't daemonize, log to stderr" \
+ "\n -c DIR Config directory [/etc/acpi]" \
+ "\n -e FILE /proc event file [/proc/acpi/event]" \
+ "\n -l FILE Log file [/var/log/acpid]" \
+ IF_FEATURE_ACPID_COMPAT( \
+ "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
+ )
+
+#define acpid_example_usage \
+ "# acpid -l /var/log/my-acpi-log\n" \
+ "# acpid -d /dev/input/event*\n"
+
+#define addgroup_trivial_usage \
+ "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP"
+#define addgroup_full_usage "\n\n" \
+ "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \
+ "\nOptions:" \
+ "\n -g GID Group id" \
+ "\n -S Create a system group" \
+
+#define adduser_trivial_usage \
+ "[OPTIONS] USER"
+#define adduser_full_usage "\n\n" \
+ "Add a user\n" \
+ "\nOptions:" \
+ "\n -h DIR Home directory" \
+ "\n -g GECOS GECOS field" \
+ "\n -s SHELL Login shell" \
+ "\n -G GRP Add user to existing group" \
+ "\n -S Create a system user" \
+ "\n -D Don't assign a password" \
+ "\n -H Don't create home directory" \
+ "\n -u UID User id" \
+
+#define adjtimex_trivial_usage \
+ "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
+#define adjtimex_full_usage "\n\n" \
+ "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
+ "\nOptions:" \
+ "\n -q Quiet" \
+ "\n -o OFF Time offset, microseconds" \
+ "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
+ "\n (positive values make clock run faster)" \
+ "\n -t TICK Microseconds per tick, usually 10000" \
+ "\n -p TCONST" \
+
+#define ar_trivial_usage \
+ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
+#define ar_full_usage "\n\n" \
+ "Extract or list FILES from an ar archive\n" \
+ "\nOptions:" \
+ "\n -o Preserve original dates" \
+ "\n -p Extract to stdout" \
+ "\n -t List" \
+ "\n -x Extract" \
+ "\n -v Verbose" \
+
+#define arp_trivial_usage \
+ "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
+ "\n[-v] [-i IF] -d HOSTNAME [pub]" \
+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
+ "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
+#define arp_full_usage "\n\n" \
+ "Manipulate ARP cache\n" \
+ "\nOptions:" \
+ "\n -a Display (all) hosts" \
+ "\n -s Set new ARP entry" \
+ "\n -d Delete a specified entry" \
+ "\n -v Verbose" \
+ "\n -n Don't resolve names" \
+ "\n -i IF Network interface" \
+ "\n -D Read <hwaddr> from given device" \
+ "\n -A, -p AF Protocol family" \
+ "\n -H HWTYPE Hardware address type" \
+
+#define arping_trivial_usage \
+ "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
+#define arping_full_usage "\n\n" \
+ "Send ARP requests/replies\n" \
+ "\nOptions:" \
+ "\n -f Quit on first ARP reply" \
+ "\n -q Quiet" \
+ "\n -b Keep broadcasting, don't go unicast" \
+ "\n -D Duplicated address detection mode" \
+ "\n -U Unsolicited ARP mode, update your neighbors" \
+ "\n -A ARP answer mode, update your neighbors" \
+ "\n -c N Stop after sending N ARP requests" \
+ "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
+ "\n -I IFACE Interface to use (default eth0)" \
+ "\n -s SRC_IP Sender IP address" \
+ "\n DST_IP Target IP address" \
+
+#define sh_trivial_usage NOUSAGE_STR
+#define sh_full_usage ""
+#define ash_trivial_usage NOUSAGE_STR
+#define ash_full_usage ""
+#define hush_trivial_usage NOUSAGE_STR
+#define hush_full_usage ""
+#define lash_trivial_usage NOUSAGE_STR
+#define lash_full_usage ""
+#define msh_trivial_usage NOUSAGE_STR
+#define msh_full_usage ""
+#define bash_trivial_usage NOUSAGE_STR
+#define bash_full_usage ""
+
+#define awk_trivial_usage \
+ "[OPTIONS] [AWK_PROGRAM] [FILE]..."
+#define awk_full_usage "\n\n" \
+ "Options:" \
+ "\n -v VAR=VAL Set variable" \
+ "\n -F SEP Use SEP as field separator" \
+ "\n -f FILE Read program from FILE" \
+
+#define basename_trivial_usage \
+ "FILE [SUFFIX]"
+#define basename_full_usage "\n\n" \
+ "Strip directory path and .SUFFIX from FILE\n"
+#define basename_example_usage \
+ "$ basename /usr/local/bin/foo\n" \
+ "foo\n" \
+ "$ basename /usr/local/bin/\n" \
+ "bin\n" \
+ "$ basename /foo/bar.txt .txt\n" \
+ "bar"
+
+#define beep_trivial_usage \
+ "-f FREQ -l LEN -d DELAY -r COUNT -n"
+#define beep_full_usage "\n\n" \
+ "Options:" \
+ "\n -f Frequency in Hz" \
+ "\n -l Length in ms" \
+ "\n -d Delay in ms" \
+ "\n -r Repetitions" \
+ "\n -n Start new tone" \
+
+#define blkid_trivial_usage \
+ ""
+#define blkid_full_usage "\n\n" \
+ "Print UUIDs of all filesystems"
+
+#define bootchartd_trivial_usage \
+ "start [PROG ARGS]|stop|init"
+#define bootchartd_full_usage "\n\n" \
+ "Create /var/log/bootchart.tgz with boot chart data\n" \
+ "\nOptions:" \
+ "\nstart: start background logging; with PROG, run PROG, then kill logging with USR1" \
+ "\nstop: send USR1 to all bootchartd processes" \
+ "\ninit: start background logging; stop when getty/xdm is seen (for init scripts)" \
+ "\nUnder PID 1: as init, then exec $bootchart_init, /init, /sbin/init" \
+
+#define brctl_trivial_usage \
+ "COMMAND [BRIDGE [INTERFACE]]"
+#define brctl_full_usage "\n\n" \
+ "Manage ethernet bridges\n" \
+ "\nCommands:" \
+ IF_FEATURE_BRCTL_SHOW( \
+ "\n show Show a list of bridges" \
+ ) \
+ "\n addbr BRIDGE Create BRIDGE" \
+ "\n delbr BRIDGE Delete BRIDGE" \
+ "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
+ "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
+ IF_FEATURE_BRCTL_FANCY( \
+ "\n setageing BRIDGE TIME Set ageing time" \
+ "\n setfd BRIDGE TIME Set bridge forward delay" \
+ "\n sethello BRIDGE TIME Set hello time" \
+ "\n setmaxage BRIDGE TIME Set max message age" \
+ "\n setpathcost BRIDGE COST Set path cost" \
+ "\n setportprio BRIDGE PRIO Set port priority" \
+ "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
+ "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
+ ) \
+
+#define bzip2_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define bzip2_full_usage "\n\n" \
+ "Compress FILEs (or stdin) with bzip2 algorithm\n" \
+ "\nOptions:" \
+ "\n -1..9 Compression level" \
+ "\n -d Decompress" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define busybox_notes_usage \
+ "Hello world!\n"
+
+#define lzop_trivial_usage \
+ "[-cfvd123456789CF] [FILE]..."
+#define lzop_full_usage "\n\n" \
+ "Options:" \
+ "\n -1..9 Compression level" \
+ "\n -d Decompress" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+ "\n -v Verbose" \
+ "\n -F Don't store or verify checksum" \
+ "\n -C Also write checksum of compressed block" \
+
+#define lzopcat_trivial_usage \
+ "[-vCF] [FILE]..."
+#define lzopcat_full_usage "\n\n" \
+ " -v Verbose" \
+ "\n -F Don't store or verify checksum" \
+
+#define unlzop_trivial_usage \
+ "[-cfvCF] [FILE]..."
+#define unlzop_full_usage "\n\n" \
+ "Options:" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+ "\n -v Verbose" \
+ "\n -F Don't store or verify checksum" \
+
+#define unlzma_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define unlzma_full_usage "\n\n" \
+ "Decompress FILE (or stdin)\n" \
+ "\nOptions:" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define lzma_trivial_usage \
+ "-d [OPTIONS] [FILE]..."
+#define lzma_full_usage "\n\n" \
+ "Decompress FILE (or stdin)\n" \
+ "\nOptions:" \
+ "\n -d Decompress" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define lzcat_trivial_usage \
+ "FILE"
+#define lzcat_full_usage "\n\n" \
+ "Decompress to stdout"
+
+#define unxz_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define unxz_full_usage "\n\n" \
+ "Decompress FILE (or stdin)\n" \
+ "\nOptions:" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define xz_trivial_usage \
+ "-d [OPTIONS] [FILE]..."
+#define xz_full_usage "\n\n" \
+ "Decompress FILE (or stdin)\n" \
+ "\nOptions:" \
+ "\n -d Decompress" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define xzcat_trivial_usage \
+ "FILE"
+#define xzcat_full_usage "\n\n" \
+ "Decompress to stdout"
+
+#define cal_trivial_usage \
+ "[-jy] [[MONTH] YEAR]"
+#define cal_full_usage "\n\n" \
+ "Display a calendar\n" \
+ "\nOptions:" \
+ "\n -j Use julian dates" \
+ "\n -y Display the entire year" \
+
+#define cat_trivial_usage \
+ "[FILE]..."
+#define cat_full_usage "\n\n" \
+ "Concatenate FILEs and print them to stdout" \
+
+#define cat_example_usage \
+ "$ cat /proc/uptime\n" \
+ "110716.72 17.67"
+
+#define catv_trivial_usage \
+ "[-etv] [FILE]..."
+#define catv_full_usage "\n\n" \
+ "Display nonprinting characters as ^x or M-x\n" \
+ "\nOptions:" \
+ "\n -e End each line with $" \
+ "\n -t Show tabs as ^I" \
+ "\n -v Don't use ^x or M-x escapes" \
+
+#define chat_trivial_usage \
+ "EXPECT [SEND [EXPECT [SEND...]]]"
+#define chat_full_usage "\n\n" \
+ "Useful for interacting with a modem connected to stdin/stdout.\n" \
+ "A script consists of one or more \"expect-send\" pairs of strings,\n" \
+ "each pair is a pair of arguments. Example:\n" \
+ "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
+
+#define chattr_trivial_usage \
+ "[-R] [-+=AacDdijsStTu] [-v VERSION] [FILE]..."
+#define chattr_full_usage "\n\n" \
+ "Change file attributes on an ext2 fs\n" \
+ "\nModifiers:" \
+ "\n - Remove attributes" \
+ "\n + Add attributes" \
+ "\n = Set attributes" \
+ "\nAttributes:" \
+ "\n A Don't track atime" \
+ "\n a Append mode only" \
+ "\n c Enable compress" \
+ "\n D Write dir contents synchronously" \
+ "\n d Don't backup with dump" \
+ "\n i Cannot be modified (immutable)" \
+ "\n j Write all data to journal first" \
+ "\n s Zero disk storage when deleted" \
+ "\n S Write file contents synchronously" \
+ "\n t Disable tail-merging of partial blocks with other files" \
+ "\n u Allow file to be undeleted" \
+ "\nOptions:" \
+ "\n -R Recurse" \
+ "\n -v Set the file's version/generation number" \
+
+#define chcon_trivial_usage \
+ "[OPTIONS] CONTEXT FILE..." \
+ "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
+ IF_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n chcon [OPTIONS] --reference=RFILE FILE..." \
+ )
+#define chcon_full_usage "\n\n" \
+ "Change the security context of each FILE to CONTEXT\n" \
+ IF_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n -v,--verbose Verbose" \
+ "\n -c,--changes Report changes made" \
+ "\n -h,--no-dereference Affect symlinks instead of their targets" \
+ "\n -f,--silent,--quiet Suppress most error messages" \
+ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
+ "\n -u,--user=USER Set user/role/type/range in the target" \
+ "\n -r,--role=ROLE security context" \
+ "\n -t,--type=TYPE" \
+ "\n -l,--range=RANGE" \
+ "\n -R,--recursive Recurse" \
+ ) \
+ IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
+ "\n -v Verbose" \
+ "\n -c Report changes made" \
+ "\n -h Affect symlinks instead of their targets" \
+ "\n -f Suppress most error messages" \
+ "\n -u USER Set user/role/type/range in the target security context" \
+ "\n -r ROLE" \
+ "\n -t TYPE" \
+ "\n -l RNG" \
+ "\n -R Recurse" \
+ )
+
+#define chmod_trivial_usage \
+ "[-R"IF_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
+#define chmod_full_usage "\n\n" \
+ "Each MODE is one or more of the letters ugoa, one of the\n" \
+ "symbols +-= and one or more of the letters rwxst\n" \
+ "\nOptions:" \
+ "\n -R Recurse" \
+ IF_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
+ )
+#define chmod_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chmod u+x /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \
+ "$ chmod 444 /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+
+#define chgrp_trivial_usage \
+ "[-RhLHP"IF_DESKTOP("cvf")"]... GROUP FILE..."
+#define chgrp_full_usage "\n\n" \
+ "Change the group membership of each FILE to GROUP\n" \
+ "\nOptions:" \
+ "\n -R Recurse" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Don't traverse symlinks (default)" \
+ IF_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v Verbose" \
+ "\n -f Hide errors" \
+ )
+#define chgrp_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chgrp root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n"
+
+#define chown_trivial_usage \
+ "[-RhLHP"IF_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
+#define chown_full_usage "\n\n" \
+ "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
+ "\nOptions:" \
+ "\n -R Recurse" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Don't traverse symlinks (default)" \
+ IF_DESKTOP( \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
+ )
+#define chown_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chown root /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \
+ "$ chown root.root /tmp/foo\n" \
+ "ls -l /tmp/foo\n" \
+ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n"
+
+#define chpst_trivial_usage \
+ "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
+ " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
+ " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
+#define chpst_full_usage "\n\n" \
+ "Change the process state and run PROG\n" \
+ "\nOptions:" \
+ "\n -u USER[:GRP] Set uid and gid" \
+ "\n -U USER[:GRP] Set $UID and $GID in environment" \
+ "\n -e DIR Set environment variables as specified by files" \
+ "\n in DIR: file=1st_line_of_file" \
+ "\n -/ DIR Chroot to DIR" \
+ "\n -n NICE Add NICE to nice value" \
+ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
+ "\n -d BYTES Limit data segment" \
+ "\n -o N Limit number of open files per process" \
+ "\n -p N Limit number of processes per uid" \
+ "\n -f BYTES Limit output file sizes" \
+ "\n -c BYTES Limit core file size" \
+ "\n -v Verbose" \
+ "\n -P Create new process group" \
+ "\n -0 Close stdin" \
+ "\n -1 Close stdout" \
+ "\n -2 Close stderr" \
+
+#define setuidgid_trivial_usage \
+ "USER PROG ARGS"
+#define setuidgid_full_usage "\n\n" \
+ "Set uid and gid to USER's uid and gid, removing all supplementary\n" \
+ "groups and run PROG"
+#define envuidgid_trivial_usage \
+ "USER PROG ARGS"
+#define envuidgid_full_usage "\n\n" \
+ "Set $UID to USER's uid and $GID to USER's gid and run PROG"
+#define envdir_trivial_usage \
+ "DIR PROG ARGS"
+#define envdir_full_usage "\n\n" \
+ "Set various environment variables as specified by files\n" \
+ "in the directory dir and run PROG"
+#define softlimit_trivial_usage \
+ "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
+ " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
+ " PROG ARGS"
+#define softlimit_full_usage "\n\n" \
+ "Set soft resource limits, then run PROG\n" \
+ "\nOptions:" \
+ "\n -a BYTES Limit total size of all segments" \
+ "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
+ "\n -d BYTES Limit data segment" \
+ "\n -s BYTES Limit stack segment" \
+ "\n -l BYTES Limit locked memory size" \
+ "\n -o N Limit number of open files per process" \
+ "\n -p N Limit number of processes per uid" \
+ "\nOptions controlling file sizes:" \
+ "\n -f BYTES Limit output file sizes" \
+ "\n -c BYTES Limit core file size" \
+ "\nEfficiency opts:" \
+ "\n -r BYTES Limit resident set size" \
+ "\n -t N Limit CPU time, process receives" \
+ "\n a SIGXCPU after N seconds" \
+
+#define chroot_trivial_usage \
+ "NEWROOT [PROG ARGS]"
+#define chroot_full_usage "\n\n" \
+ "Run PROG with root directory set to NEWROOT"
+#define chroot_example_usage \
+ "$ ls -l /bin/ls\n" \
+ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
+ "# mount /dev/hdc1 /mnt -t minix\n" \
+ "# chroot /mnt\n" \
+ "# ls -l /bin/ls\n" \
+ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
+
+#define chvt_trivial_usage \
+ "N"
+#define chvt_full_usage "\n\n" \
+ "Change the foreground virtual terminal to /dev/ttyN"
+
+#define cksum_trivial_usage \
+ "FILES..."
+#define cksum_full_usage "\n\n" \
+ "Calculate the CRC32 checksums of FILES"
+
+#define clear_trivial_usage \
+ ""
+#define clear_full_usage "\n\n" \
+ "Clear screen"
+
+#define cmp_trivial_usage \
+ "[-l] [-s] FILE1 [FILE2" IF_DESKTOP(" [SKIP1 [SKIP2]]") "]"
+#define cmp_full_usage "\n\n" \
+ "Compare FILE1 with FILE2 (or stdin)\n" \
+ "\nOptions:" \
+ "\n -l Write the byte numbers (decimal) and values (octal)" \
+ "\n for all differing bytes" \
+ "\n -s Quiet" \
+
+#define comm_trivial_usage \
+ "[-123] FILE1 FILE2"
+#define comm_full_usage "\n\n" \
+ "Compare FILE1 with FILE2\n" \
+ "\nOptions:" \
+ "\n -1 Suppress lines unique to FILE1" \
+ "\n -2 Suppress lines unique to FILE2" \
+ "\n -3 Suppress lines common to both files" \
+
+#define bbconfig_trivial_usage \
+ ""
+#define bbconfig_full_usage "\n\n" \
+ "Print the config file which built busybox"
+
+#define chrt_trivial_usage \
+ "[OPTIONS] [PRIO] [PID | PROG ARGS]"
+#define chrt_full_usage "\n\n" \
+ "Manipulate real-time attributes of a process\n" \
+ "\nOptions:" \
+ "\n -p Operate on PID" \
+ "\n -r Set SCHED_RR scheduling" \
+ "\n -f Set SCHED_FIFO scheduling" \
+ "\n -o Set SCHED_OTHER scheduling" \
+ "\n -m Show min and max priorities" \
+
+#define chrt_example_usage \
+ "$ chrt -r 4 sleep 900; x=$!\n" \
+ "$ chrt -f -p 3 $x\n" \
+ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
+
+#define cp_trivial_usage \
+ "[OPTIONS] SOURCE DEST"
+#define cp_full_usage "\n\n" \
+ "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -a Same as -dpR" \
+ IF_SELINUX( \
+ "\n -c Preserve security context" \
+ ) \
+ "\n -R,-r Recurse" \
+ "\n -d,-P Preserve symlinks (default if -R)" \
+ "\n -L Follow all symlinks" \
+ "\n -H Follow symlinks on command line" \
+ "\n -p Preserve file attributes if possible" \
+ "\n -f Overwrite" \
+ "\n -i Prompt before overwrite" \
+ "\n -l,-s Create (sym)links" \
+
+#define cpio_trivial_usage \
+ "[-dmvu] [-F FILE]" IF_FEATURE_CPIO_O(" [-H newc]") \
+ " [-ti"IF_FEATURE_CPIO_O("o")"]" IF_FEATURE_CPIO_P(" [-p DIR]")
+#define cpio_full_usage "\n\n" \
+ "Extract or list files from a cpio archive" \
+ IF_FEATURE_CPIO_O(", or" \
+ "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \
+ " using file list on stdin" \
+ ) \
+ "\n" \
+ "\nMain operation mode:" \
+ "\n -t List" \
+ "\n -i Extract" \
+ IF_FEATURE_CPIO_O( \
+ "\n -o Create (requires -H newc)" \
+ ) \
+ IF_FEATURE_CPIO_P( \
+ "\n -p DIR Copy files to DIR" \
+ ) \
+ "\nOptions:" \
+ "\n -d Make leading directories" \
+ "\n -m Preserve mtime" \
+ "\n -v Verbose" \
+ "\n -u Overwrite" \
+ "\n -F FILE Input (-t,-i,-p) or output (-o) file" \
+ IF_FEATURE_CPIO_O( \
+ "\n -H newc Archive format" \
+ ) \
+
+#define crond_trivial_usage \
+ "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
+#define crond_full_usage "\n\n" \
+ " -f Foreground" \
+ "\n -b Background (default)" \
+ "\n -S Log to syslog (default)" \
+ "\n -l Set log level. 0 is the most verbose, default 8" \
+ IF_FEATURE_CROND_D( \
+ "\n -d Set log level, log to stderr" \
+ ) \
+ "\n -L Log to file" \
+ "\n -c Working dir" \
+
+#define crontab_trivial_usage \
+ "[-c DIR] [-u USER] [-ler]|[FILE]"
+#define crontab_full_usage "\n\n" \
+ " -c Crontab directory" \
+ "\n -u User" \
+ "\n -l List crontab" \
+ "\n -e Edit crontab" \
+ "\n -r Delete crontab" \
+ "\n FILE Replace crontab by FILE ('-': stdin)" \
+
+#define cryptpw_trivial_usage \
+ "[OPTIONS] [PASSWORD] [SALT]"
+/* We do support -s, we just don't mention it */
+#define cryptpw_full_usage "\n\n" \
+ "Crypt the PASSWORD using crypt(3)\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -P,--password-fd=N Read password from fd N" \
+/* "\n -s,--stdin Use stdin; like -P0" */ \
+ "\n -m,--method=TYPE Encryption method TYPE" \
+ "\n -S,--salt=SALT" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -P N Read password from fd N" \
+/* "\n -s Use stdin; like -P0" */ \
+ "\n -m TYPE Encryption method TYPE" \
+ "\n -S SALT" \
+ ) \
+
+/* mkpasswd is an alias to cryptpw */
+
+#define mkpasswd_trivial_usage \
+ "[OPTIONS] [PASSWORD] [SALT]"
+/* We do support -s, we just don't mention it */
+#define mkpasswd_full_usage "\n\n" \
+ "Crypt the PASSWORD using crypt(3)\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -P,--password-fd=N Read password from fd N" \
+/* "\n -s,--stdin Use stdin; like -P0" */ \
+ "\n -m,--method=TYPE Encryption method TYPE" \
+ "\n -S,--salt=SALT" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -P N Read password from fd N" \
+/* "\n -s Use stdin; like -P0" */ \
+ "\n -m TYPE Encryption method TYPE" \
+ "\n -S SALT" \
+ ) \
+
+#define cttyhack_trivial_usage \
+ "PROG ARGS"
+#define cttyhack_full_usage "\n\n" \
+ "Give PROG a controlling tty if possible." \
+ "\nExample for /etc/inittab (for busybox init):" \
+ "\n ::respawn:/bin/cttyhack /bin/sh" \
+ "\nGiving controlling tty to shell running with PID 1:" \
+ "\n $ exec cttyhack sh" \
+ "\nStarting interactive shell from boot shell script:" \
+ "\n setsid cttyhack sh" \
+
+#define cut_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define cut_full_usage "\n\n" \
+ "Print selected fields from each input FILE to stdout\n" \
+ "\nOptions:" \
+ "\n -b LIST Output only bytes from LIST" \
+ "\n -c LIST Output only characters from LIST" \
+ "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
+ "\n -s Output only the lines containing delimiter" \
+ "\n -f N Print only these fields" \
+ "\n -n Ignored" \
+
+#define cut_example_usage \
+ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
+ "Hello\n" \
+ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \
+ "world\n"
+
+#define date_trivial_usage \
+ "[OPTIONS] [+FMT] [TIME]"
+#define date_full_usage "\n\n" \
+ "Display time (using +FMT), or set time\n" \
+ "\nOptions:" \
+ IF_NOT_LONG_OPTS( \
+ "\n [-s] TIME Set time to TIME" \
+ "\n -u Work in UTC (don't convert to local time)" \
+ "\n -R Output RFC-2822 compliant date string" \
+ ) IF_LONG_OPTS( \
+ "\n [-s,--set] TIME Set time to TIME" \
+ "\n -u,--utc Work in UTC (don't convert to local time)" \
+ "\n -R,--rfc-2822 Output RFC-2822 compliant date string" \
+ ) \
+ IF_FEATURE_DATE_ISOFMT( \
+ "\n -I[SPEC] Output ISO-8601 compliant date string" \
+ "\n SPEC='date' (default) for date only," \
+ "\n 'hours', 'minutes', or 'seconds' for date and" \
+ "\n time to the indicated precision" \
+ ) IF_NOT_LONG_OPTS( \
+ "\n -r FILE Display last modification time of FILE" \
+ "\n -d TIME Display TIME, not 'now'" \
+ ) IF_LONG_OPTS( \
+ "\n -r,--reference FILE Display last modification time of FILE" \
+ "\n -d,--date TIME Display TIME, not 'now'" \
+ ) \
+ IF_FEATURE_DATE_ISOFMT( \
+ "\n -D FMT Use FMT for -d TIME conversion" \
+ ) \
+ "\n" \
+ "\nRecognized TIME formats:" \
+ "\n hh:mm[:ss]" \
+ "\n [YYYY.]MM.DD-hh:mm[:ss]" \
+ "\n YYYY-MM-DD hh:mm[:ss]" \
+ "\n [[[[[YY]YY]MM]DD]hh]mm[.ss]" \
+
+#define date_example_usage \
+ "$ date\n" \
+ "Wed Apr 12 18:52:41 MDT 2000\n"
+
+#define dc_trivial_usage \
+ "expression..."
+#define dc_full_usage "\n\n" \
+ "Tiny RPN calculator. Operations:\n" \
+ "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \
+ "p - print top of the stack (without altering the stack),\n" \
+ "f - print entire stack, o - pop the value and set output radix\n" \
+ "(value must be 10 or 16).\n" \
+ "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \
+
+#define dc_example_usage \
+ "$ dc 2 2 + p\n" \
+ "4\n" \
+ "$ dc 8 8 \\* 2 2 + / p\n" \
+ "16\n" \
+ "$ dc 0 1 and p\n" \
+ "0\n" \
+ "$ dc 0 1 or p\n" \
+ "1\n" \
+ "$ echo 72 9 div 8 mul p | dc\n" \
+ "64\n"
+
+#define dd_trivial_usage \
+ "[if=FILE] [of=FILE] " IF_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
+ " [seek=N]" IF_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]")
+#define dd_full_usage "\n\n" \
+ "Copy a file with converting and formatting\n" \
+ "\nOptions:" \
+ "\n if=FILE Read from FILE instead of stdin" \
+ "\n of=FILE Write to FILE instead of stdout" \
+ "\n bs=N Read and write N bytes at a time" \
+ IF_FEATURE_DD_IBS_OBS( \
+ "\n ibs=N Read N bytes at a time" \
+ ) \
+ IF_FEATURE_DD_IBS_OBS( \
+ "\n obs=N Write N bytes at a time" \
+ ) \
+ "\n count=N Copy only N input blocks" \
+ "\n skip=N Skip N input blocks" \
+ "\n seek=N Skip N output blocks" \
+ IF_FEATURE_DD_IBS_OBS( \
+ "\n conv=notrunc Don't truncate output file" \
+ "\n conv=noerror Continue after read errors" \
+ "\n conv=sync Pad blocks with zeros" \
+ "\n conv=fsync Physically write data out before finishing" \
+ ) \
+ "\n" \
+ "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
+ "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
+
+#define dd_example_usage \
+ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
+ "4+0 records in\n" \
+ "4+0 records out\n"
+
+#define deallocvt_trivial_usage \
+ "[N]"
+#define deallocvt_full_usage "\n\n" \
+ "Deallocate unused virtual terminal /dev/ttyN"
+
+#define delgroup_trivial_usage \
+ IF_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP"
+#define delgroup_full_usage "\n\n" \
+ "Delete group GROUP from the system" \
+ IF_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP")
+
+#define deluser_trivial_usage \
+ "USER"
+#define deluser_full_usage "\n\n" \
+ "Delete USER from the system"
+
+#define depmod_trivial_usage NOUSAGE_STR
+#define depmod_full_usage ""
+
+#define devmem_trivial_usage \
+ "ADDRESS [WIDTH [VALUE]]"
+
+#define devmem_full_usage "\n\n" \
+ "Read/write from physical address\n" \
+ "\n ADDRESS Address to act upon" \
+ "\n WIDTH Width (8/16/...)" \
+ "\n VALUE Data to be written" \
+
+#define devfsd_trivial_usage \
+ "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
+#define devfsd_full_usage "\n\n" \
+ "Manage devfs permissions and old device name symlinks\n" \
+ "\nOptions:" \
+ "\n mntpnt The mount point where devfs is mounted" \
+ "\n -v Print the protocol version numbers for devfsd" \
+ "\n and the kernel-side protocol version and exit" \
+ IF_DEVFSD_FG_NP( \
+ "\n -fg Run in foreground" \
+ "\n -np Exit after parsing the configuration file" \
+ "\n and processing synthetic REGISTER events," \
+ "\n don't poll for events" \
+ )
+
+#define df_trivial_usage \
+ "[-Pk" \
+ IF_FEATURE_HUMAN_READABLE("mh") \
+ IF_FEATURE_DF_FANCY("ai] [-B SIZE") \
+ "] [FILESYSTEM]..."
+#define df_full_usage "\n\n" \
+ "Print filesystem usage statistics\n" \
+ "\nOptions:" \
+ "\n -P POSIX output format" \
+ "\n -k 1024-byte blocks (default)" \
+ IF_FEATURE_HUMAN_READABLE( \
+ "\n -m 1M-byte blocks" \
+ "\n -h Human readable (e.g. 1K 243M 2G)" \
+ ) \
+ IF_FEATURE_DF_FANCY( \
+ "\n -a Show all filesystems" \
+ "\n -i Inodes" \
+ "\n -B SIZE Blocksize" \
+ ) \
+
+#define df_example_usage \
+ "$ df\n" \
+ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 8690864 8553540 137324 98% /\n" \
+ "/dev/sda1 64216 36364 27852 57% /boot\n" \
+ "$ df /dev/sda3\n" \
+ "Filesystem 1K-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 8690864 8553540 137324 98% /\n" \
+ "$ POSIXLY_CORRECT=sure df /dev/sda3\n" \
+ "Filesystem 512B-blocks Used Available Use% Mounted on\n" \
+ "/dev/sda3 17381728 17107080 274648 98% /\n" \
+ "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" \
+ "Filesystem 512-blocks Used Available Capacity Mounted on\n" \
+ "/dev/sda3 17381728 17107080 274648 98% /\n"
+
+#define dhcprelay_trivial_usage \
+ "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
+#define dhcprelay_full_usage "\n\n" \
+ "Relay DHCP requests between clients and server" \
+
+#define diff_trivial_usage \
+ "[-abBdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
+#define diff_full_usage "\n\n" \
+ "Compare files line by line and output the differences between them.\n" \
+ "This implementation supports unified diffs only.\n" \
+ "\nOptions:" \
+ "\n -a Treat all files as text" \
+ "\n -b Ignore changes in the amount of whitespace" \
+ "\n -B Ignore changes whose lines are all blank" \
+ "\n -d Try hard to find a smaller set of changes" \
+ "\n -i Ignore case differences" \
+ "\n -L Use LABEL instead of the filename in the unified header" \
+ "\n -N Treat absent files as empty" \
+ "\n -q Output only whether files differ" \
+ "\n -r Recurse" \
+ "\n -S Start with FILE when comparing directories" \
+ "\n -T Make tabs line up by prefixing a tab when necessary" \
+ "\n -s Report when two files are the same" \
+ "\n -t Expand tabs to spaces in output" \
+ "\n -U Output LINES lines of context" \
+ "\n -w Ignore all whitespace" \
+
+#define dirname_trivial_usage \
+ "FILENAME"
+#define dirname_full_usage "\n\n" \
+ "Strip non-directory suffix from FILENAME"
+#define dirname_example_usage \
+ "$ dirname /tmp/foo\n" \
+ "/tmp\n" \
+ "$ dirname /tmp/foo/\n" \
+ "/tmp\n"
+
+#define dmesg_trivial_usage \
+ "[-c] [-n LEVEL] [-s SIZE]"
+#define dmesg_full_usage "\n\n" \
+ "Print or control the kernel ring buffer\n" \
+ "\nOptions:" \
+ "\n -c Clear ring buffer after printing" \
+ "\n -n LEVEL Set console logging level" \
+ "\n -s SIZE Buffer size" \
+
+#define dnsd_trivial_usage \
+ "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
+#define dnsd_full_usage "\n\n" \
+ "Small static DNS server daemon\n" \
+ "\nOptions:" \
+ "\n -c FILE Config file" \
+ "\n -t SEC TTL" \
+ "\n -p PORT Listen on PORT" \
+ "\n -i ADDR Listen on ADDR" \
+ "\n -d Daemonize" \
+ "\n -v Verbose" \
+ "\n -s Send successful replies only. Use this if you want" \
+ "\n to use /etc/resolv.conf with two nameserver lines:" \
+ "\n nameserver DNSD_SERVER" \
+ "\n nameserver NORNAL_DNS_SERVER" \
+
+#define dos2unix_trivial_usage \
+ "[OPTIONS] [FILE]"
+#define dos2unix_full_usage "\n\n" \
+ "Convert FILE in-place from DOS to Unix format.\n" \
+ "When no file is given, use stdin/stdout.\n" \
+ "\nOptions:" \
+ "\n -u dos2unix" \
+ "\n -d unix2dos" \
+
+#define unix2dos_trivial_usage \
+ "[OPTIONS] [FILE]"
+#define unix2dos_full_usage "\n\n" \
+ "Convert FILE in-place from Unix to DOS format.\n" \
+ "When no file is given, use stdin/stdout.\n" \
+ "\nOptions:" \
+ "\n -u dos2unix" \
+ "\n -d unix2dos" \
+
+#define dpkg_trivial_usage \
+ "[-ilCPru] [-F OPT] PACKAGE"
+#define dpkg_full_usage "\n\n" \
+ "Install, remove and manage Debian packages\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -i,--install Install the package" \
+ "\n -l,--list List of installed packages" \
+ "\n --configure Configure an unpackaged package" \
+ "\n -P,--purge Purge all files of a package" \
+ "\n -r,--remove Remove all but the configuration files for a package" \
+ "\n --unpack Unpack a package, but don't configure it" \
+ "\n --force-depends Ignore dependency problems" \
+ "\n --force-confnew Overwrite existing config files when installing" \
+ "\n --force-confold Keep old config files when installing" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -i Install the package" \
+ "\n -l List of installed packages" \
+ "\n -C Configure an unpackaged package" \
+ "\n -P Purge all files of a package" \
+ "\n -r Remove all but the configuration files for a package" \
+ "\n -u Unpack a package, but don't configure it" \
+ "\n -F depends Ignore dependency problems" \
+ "\n -F confnew Overwrite existing config files when installing" \
+ "\n -F confold Keep old config files when installing" \
+ )
+
+#define dpkg_deb_trivial_usage \
+ "[-cefxX] FILE [argument]"
+#define dpkg_deb_full_usage "\n\n" \
+ "Perform actions on Debian packages (.debs)\n" \
+ "\nOptions:" \
+ "\n -c List contents of filesystem tree" \
+ "\n -e Extract control files to [argument] directory" \
+ "\n -f Display control field name starting with [argument]" \
+ "\n -x Extract packages filesystem tree to directory" \
+ "\n -X Verbose extract" \
+
+#define dpkg_deb_example_usage \
+ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
+
+#define du_trivial_usage \
+ "[-aHLdclsx" IF_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..."
+#define du_full_usage "\n\n" \
+ "Summarize disk space used for each FILE and/or directory.\n" \
+ "Disk space is printed in units of " \
+ IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
+ IF_NOT_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
+ " bytes.\n" \
+ "\nOptions:" \
+ "\n -a Show file sizes too" \
+ "\n -L Follow all symlinks" \
+ "\n -H Follow symlinks on command line" \
+ "\n -d N Limit output to directories (and files with -a) of depth < N" \
+ "\n -c Show grand total" \
+ "\n -l Count sizes many times if hard linked" \
+ "\n -s Display only a total for each argument" \
+ "\n -x Skip directories on different filesystems" \
+ IF_FEATURE_HUMAN_READABLE( \
+ "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
+ "\n -m Sizes in megabytes" \
+ ) \
+ "\n -k Sizes in kilobytes" \
+ IF_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
+
+#define du_example_usage \
+ "$ du\n" \
+ "16 ./CVS\n" \
+ "12 ./kernel-patches/CVS\n" \
+ "80 ./kernel-patches\n" \
+ "12 ./tests/CVS\n" \
+ "36 ./tests\n" \
+ "12 ./scripts/CVS\n" \
+ "16 ./scripts\n" \
+ "12 ./docs/CVS\n" \
+ "104 ./docs\n" \
+ "2417 .\n"
+
+#define dumpkmap_trivial_usage \
+ "> keymap"
+#define dumpkmap_full_usage "\n\n" \
+ "Print a binary keyboard translation table to stdout"
+#define dumpkmap_example_usage \
+ "$ dumpkmap > keymap\n"
+
+#define dumpleases_trivial_usage \
+ "[-r|-a] [-f LEASEFILE]"
+#define dumpleases_full_usage "\n\n" \
+ "Display DHCP leases granted by udhcpd\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -f,--file=FILE Lease file" \
+ "\n -r,--remaining Show remaining time" \
+ "\n -a,--absolute Show expiration time" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -f FILE Lease file" \
+ "\n -r Show remaining time" \
+ "\n -a Show expiration time" \
+ )
+
+/*
+#define e2fsck_trivial_usage \
+ "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
+ "[-I inode_buffer_blocks] [-P process_inode_size] " \
+ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
+ "[-E extended-options] device"
+#define e2fsck_full_usage "\n\n" \
+ "Check ext2/ext3 file system\n" \
+ "\nOptions:" \
+ "\n -p Automatic repair (no questions)" \
+ "\n -n Make no changes to the filesystem" \
+ "\n -y Assume 'yes' to all questions" \
+ "\n -c Check for bad blocks and add them to the badblock list" \
+ "\n -f Force checking even if filesystem is marked clean" \
+ "\n -v Verbose" \
+ "\n -b superblock Use alternative superblock" \
+ "\n -B blocksize Force blocksize when looking for superblock" \
+ "\n -j journal Set location of the external journal" \
+ "\n -l file Add to badblocks list" \
+ "\n -L file Set badblocks list" \
+*/
+
+#define echo_trivial_usage \
+ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..."
+#define echo_full_usage "\n\n" \
+ "Print the specified ARGs to stdout" \
+ IF_FEATURE_FANCY_ECHO( "\n" \
+ "\nOptions:" \
+ "\n -n Suppress trailing newline" \
+ "\n -e Interpret backslash escapes (i.e., \\t=tab)" \
+ "\n -E Don't interpret backslash escapes (default)" \
+ )
+#define echo_example_usage \
+ "$ echo \"Erik is cool\"\n" \
+ "Erik is cool\n" \
+ IF_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \
+ "Erik\n" \
+ "is\n" \
+ "cool\n" \
+ "$ echo \"Erik\\nis\\ncool\"\n" \
+ "Erik\\nis\\ncool\n")
+
+#define eject_trivial_usage \
+ "[-t] [-T] [DEVICE]"
+#define eject_full_usage "\n\n" \
+ "Eject DEVICE or default /dev/cdrom\n" \
+ "\nOptions:" \
+ IF_FEATURE_EJECT_SCSI( \
+ "\n -s SCSI device" \
+ ) \
+ "\n -t Close tray" \
+ "\n -T Open/close tray (toggle)" \
+
+#define ed_trivial_usage ""
+#define ed_full_usage ""
+
+#define env_trivial_usage \
+ "[-iu] [-] [name=value]... [PROG ARGS]"
+#define env_full_usage "\n\n" \
+ "Print the current environment or run PROG after setting up\n" \
+ "the specified environment\n" \
+ "\nOptions:" \
+ "\n -, -i Start with an empty environment" \
+ "\n -u Remove variable from the environment" \
+
+#define ether_wake_trivial_usage \
+ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
+#define ether_wake_full_usage "\n\n" \
+ "Send a magic packet to wake up sleeping machines.\n" \
+ "MAC must be a station address (00:11:22:33:44:55) or\n" \
+ "a hostname with a known 'ethers' entry.\n" \
+ "\nOptions:" \
+ "\n -b Send wake-up packet to the broadcast address" \
+ "\n -i iface Interface to use (default eth0)" \
+ "\n -p pass Append four or six byte password PW to the packet" \
+
+#define expand_trivial_usage \
+ "[-i] [-t N] [FILE]..."
+#define expand_full_usage "\n\n" \
+ "Convert tabs to spaces, writing to stdout\n" \
+ "\nOptions:" \
+ IF_FEATURE_EXPAND_LONG_OPTIONS( \
+ "\n -i,--initial Don't convert tabs after non blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
+ ) \
+ IF_NOT_FEATURE_EXPAND_LONG_OPTIONS( \
+ "\n -i Don't convert tabs after non blanks" \
+ "\n -t Tabstops every N chars" \
+ )
+
+#define expr_trivial_usage \
+ "EXPRESSION"
+#define expr_full_usage "\n\n" \
+ "Print the value of EXPRESSION to stdout\n" \
+ "\n" \
+ "EXPRESSION may be:\n" \
+ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
+ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
+ " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \
+ " ARG1 <= ARG2\n" \
+ " ARG1 = ARG2\n" \
+ " ARG1 != ARG2\n" \
+ " ARG1 >= ARG2\n" \
+ " ARG1 > ARG2\n" \
+ " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \
+ " ARG1 - ARG2\n" \
+ " ARG1 * ARG2\n" \
+ " ARG1 / ARG2\n" \
+ " ARG1 % ARG2\n" \
+ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \
+ " match STRING REGEXP Same as STRING : REGEXP\n" \
+ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \
+ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \
+ " length STRING Length of STRING\n" \
+ " quote TOKEN Interpret TOKEN as a string, even if\n" \
+ " it is a keyword like 'match' or an\n" \
+ " operator like '/'\n" \
+ " (EXPRESSION) Value of EXPRESSION\n" \
+ "\n" \
+ "Beware that many operators need to be escaped or quoted for shells.\n" \
+ "Comparisons are arithmetic if both ARGs are numbers, else\n" \
+ "lexicographical. Pattern matches return the string matched between\n" \
+ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \
+ "of characters matched or 0."
+
+#define fakeidentd_trivial_usage \
+ "[-fiw] [-b ADDR] [STRING]"
+#define fakeidentd_full_usage "\n\n" \
+ "Provide fake ident (auth) service\n" \
+ "\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -i Inetd mode" \
+ "\n -w Inetd 'wait' mode" \
+ "\n -b ADDR Bind to specified address" \
+ "\n STRING Ident answer string (default: nobody)" \
+
+#define false_trivial_usage \
+ ""
+#define false_full_usage "\n\n" \
+ "Return an exit code of FALSE (1)"
+
+#define false_example_usage \
+ "$ false\n" \
+ "$ echo $?\n" \
+ "1\n"
+
+#define fbsplash_trivial_usage \
+ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
+#define fbsplash_full_usage "\n\n" \
+ "Options:" \
+ "\n -s Image" \
+ "\n -c Hide cursor" \
+ "\n -d Framebuffer device (default /dev/fb0)" \
+ "\n -i Config file (var=value):" \
+ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
+ "\n BAR_R,BAR_G,BAR_B" \
+ "\n -f Control pipe (else exit after drawing image)" \
+ "\n commands: 'NN' (% for progress bar) or 'exit'" \
+
+#define fbset_trivial_usage \
+ "[OPTIONS] [MODE]"
+#define fbset_full_usage "\n\n" \
+ "Show and modify frame buffer settings"
+
+#define fbset_example_usage \
+ "$ fbset\n" \
+ "mode \"1024x768-76\"\n" \
+ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
+ " geometry 1024 768 1024 768 16\n" \
+ " timings 12714 128 32 16 4 128 4\n" \
+ " accel false\n" \
+ " rgba 5/11,6/5,5/0,0/0\n" \
+ "endmode\n"
+
+#define fdflush_trivial_usage \
+ "DEVICE"
+#define fdflush_full_usage "\n\n" \
+ "Force floppy disk drive to detect disk change"
+
+#define fdformat_trivial_usage \
+ "[-n] DEVICE"
+#define fdformat_full_usage "\n\n" \
+ "Format floppy disk\n" \
+ "\nOptions:" \
+ "\n -n Don't verify after format" \
+
+/* Looks like someone forgot to add this to config system */
+#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
+# define ENABLE_FEATURE_FDISK_BLKSIZE 0
+# define IF_FEATURE_FDISK_BLKSIZE(a)
+#endif
+
+#define fdisk_trivial_usage \
+ "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
+ "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
+#define fdisk_full_usage "\n\n" \
+ "Change partition table\n" \
+ "\nOptions:" \
+ "\n -u Start and End are in sectors (instead of cylinders)" \
+ "\n -l Show partition table for each DISK, then exit" \
+ IF_FEATURE_FDISK_BLKSIZE( \
+ "\n -s Show partition sizes in kb for each DISK, then exit" \
+ ) \
+ "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
+ "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
+ "\n -H HEADS" \
+ "\n -S SECTORS" \
+
+#define fgconsole_trivial_usage \
+ ""
+#define fgconsole_full_usage "\n\n" \
+ "Get active console"
+
+#define findfs_trivial_usage \
+ "LABEL=label or UUID=uuid"
+#define findfs_full_usage "\n\n" \
+ "Find a filesystem device based on a label or UUID"
+#define findfs_example_usage \
+ "$ findfs LABEL=MyDevice"
+
+#define find_trivial_usage \
+ "[PATH]... [EXPRESSION]"
+#define find_full_usage "\n\n" \
+ "Search for files. The default PATH is the current directory,\n" \
+ "default EXPRESSION is '-print'\n" \
+ "\nEXPRESSION may consist of:" \
+ "\n -follow Follow symlinks" \
+ IF_FEATURE_FIND_XDEV( \
+ "\n -xdev Don't descend directories on other filesystems") \
+ IF_FEATURE_FIND_MAXDEPTH( \
+ "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \
+ "\n tests/actions to command line arguments only") \
+ "\n -mindepth N Don't act on first N levels" \
+ "\n -name PATTERN File name (w/o directory name) matches PATTERN" \
+ "\n -iname PATTERN Case insensitive -name" \
+ IF_FEATURE_FIND_PATH( \
+ "\n -path PATTERN Path matches PATTERN") \
+ IF_FEATURE_FIND_REGEX( \
+ "\n -regex PATTERN Path matches regex PATTERN") \
+ IF_FEATURE_FIND_TYPE( \
+ "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \
+ IF_FEATURE_FIND_PERM( \
+ "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \
+ "\n or exactly NNN") \
+ IF_FEATURE_FIND_MTIME( \
+ "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \
+ "\n or exactly N days") \
+ IF_FEATURE_FIND_MMIN( \
+ "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \
+ "\n or exactly N minutes") \
+ IF_FEATURE_FIND_NEWER( \
+ "\n -newer FILE Modified time is more recent than FILE's") \
+ IF_FEATURE_FIND_INUM( \
+ "\n -inum N File has inode number N") \
+ IF_FEATURE_FIND_USER( \
+ "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \
+ IF_FEATURE_FIND_GROUP( \
+ "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \
+ IF_FEATURE_FIND_DEPTH( \
+ "\n -depth Process directory name after traversing it") \
+ IF_FEATURE_FIND_SIZE( \
+ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \
+ "\n +/-N: file size is bigger/smaller than N") \
+ IF_FEATURE_FIND_LINKS( \
+ "\n -links N Number of links is greater than (+N), less than (-N)," \
+ "\n or exactly N") \
+ "\n -print Print (default and assumed)" \
+ IF_FEATURE_FIND_PRINT0( \
+ "\n -print0 Delimit output with null characters rather than" \
+ "\n newlines") \
+ IF_FEATURE_FIND_CONTEXT ( \
+ "\n -context File has specified security context") \
+ IF_FEATURE_FIND_EXEC( \
+ "\n -exec CMD ARG ; Run CMD with all instances of {} replaced by the" \
+ "\n matching files") \
+ IF_FEATURE_FIND_PRUNE( \
+ "\n -prune Stop traversing current subtree") \
+ IF_FEATURE_FIND_DELETE( \
+ "\n -delete Delete files, turns on -depth option") \
+ IF_FEATURE_FIND_PAREN( \
+ "\n (EXPR) Group an expression") \
+
+#define find_example_usage \
+ "$ find / -name passwd\n" \
+ "/etc/passwd\n"
+
+#define flash_lock_trivial_usage \
+ "MTD_DEVICE OFFSET SECTORS"
+#define flash_lock_full_usage "\n\n" \
+ "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
+ "will be locked, regardless of the value of OFFSET"
+
+#define flash_unlock_trivial_usage \
+ "MTD_DEVICE"
+#define flash_unlock_full_usage "\n\n" \
+ "Unlock an MTD device"
+
+#define flash_eraseall_trivial_usage \
+ "[-jq] MTD_DEVICE"
+#define flash_eraseall_full_usage "\n\n" \
+ "Erase an MTD device\n" \
+ "\nOptions:" \
+ "\n -j Format the device for jffs2" \
+ "\n -q Don't display progress messages" \
+
+#define flashcp_trivial_usage \
+ "-v FILE MTD_DEVICE"
+#define flashcp_full_usage "\n\n" \
+ "Copy an image to MTD device\n" \
+ "\nOptions:" \
+ "\n -v Verbose" \
+
+#define flock_trivial_usage \
+ "[-sxun] FD|{FILE [-c] PROG ARGS}"
+#define flock_full_usage "\n\n" \
+ "[Un]lock file descriptor, or lock FILE and run PROG\n" \
+ "\nOptions:" \
+ "\n -s Shared lock" \
+ "\n -x Exclusive lock (default)" \
+ "\n -u Unlock FD" \
+ "\n -n Fail rather than wait" \
+
+#define fold_trivial_usage \
+ "[-bs] [-w WIDTH] [FILE]..."
+#define fold_full_usage "\n\n" \
+ "Wrap input lines in each FILE (or stdin), writing to stdout\n" \
+ "\nOptions:" \
+ "\n -b Count bytes rather than columns" \
+ "\n -s Break at spaces" \
+ "\n -w Use WIDTH columns instead of 80" \
+
+#define free_trivial_usage \
+ ""
+#define free_full_usage "\n\n" \
+ "Display the amount of free and used system memory"
+#define free_example_usage \
+ "$ free\n" \
+ " total used free shared buffers\n" \
+ " Mem: 257628 248724 8904 59644 93124\n" \
+ " Swap: 128516 8404 120112\n" \
+ "Total: 386144 257128 129016\n" \
+
+#define freeramdisk_trivial_usage \
+ "DEVICE"
+#define freeramdisk_full_usage "\n\n" \
+ "Free all memory used by the specified ramdisk"
+#define freeramdisk_example_usage \
+ "$ freeramdisk /dev/ram2\n"
+
+#define fsck_trivial_usage \
+ "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..."
+#define fsck_full_usage "\n\n" \
+ "Check and repair filesystems\n" \
+ "\nOptions:" \
+ "\n -A Walk /etc/fstab and check all filesystems" \
+ "\n -N Don't execute, just show what would be done" \
+ "\n -P With -A, check filesystems in parallel" \
+ "\n -R With -A, skip the root filesystem" \
+ "\n -T Don't show title on startup" \
+ "\n -V Verbose" \
+ "\n -C n Write status information to specified filedescriptor" \
+ "\n -t TYPE List of filesystem types to check" \
+
+#define fsck_minix_trivial_usage \
+ "[-larvsmf] BLOCKDEV"
+#define fsck_minix_full_usage "\n\n" \
+ "Check MINIX filesystem\n" \
+ "\nOptions:" \
+ "\n -l List all filenames" \
+ "\n -r Perform interactive repairs" \
+ "\n -a Perform automatic repairs" \
+ "\n -v Verbose" \
+ "\n -s Output superblock information" \
+ "\n -m Show \"mode not cleared\" warnings" \
+ "\n -f Force file system check" \
+
+#define ftpd_trivial_usage \
+ "[-wvS] [-t N] [-T N] [DIR]"
+#define ftpd_full_usage "\n\n" \
+ "Anonymous FTP server\n" \
+ "\n" \
+ "ftpd should be used as an inetd service.\n" \
+ "ftpd's line for inetd.conf:\n" \
+ " 21 stream tcp nowait root ftpd ftpd /files/to/serve\n" \
+ "It also can be ran from tcpsvd:\n" \
+ " tcpsvd -vE 0.0.0.0 21 ftpd /files/to/serve\n" \
+ "\nOptions:" \
+ "\n -w Allow upload" \
+ "\n -v Log to stderr" \
+ "\n -S Log to syslog" \
+ "\n -t,-T Idle and absolute timeouts" \
+ "\n DIR Change root to this directory" \
+
+#define ftpget_trivial_usage \
+ "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
+#define ftpget_full_usage "\n\n" \
+ "Retrieve a remote file via FTP\n" \
+ "\nOptions:" \
+ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
+ "\n -c,--continue Continue previous transfer" \
+ "\n -v,--verbose Verbose" \
+ "\n -u,--username Username" \
+ "\n -p,--password Password" \
+ "\n -P,--port Port number" \
+ ) \
+ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
+ "\n -c Continue previous transfer" \
+ "\n -v Verbose" \
+ "\n -u Username" \
+ "\n -p Password" \
+ "\n -P Port number" \
+ )
+
+#define ftpput_trivial_usage \
+ "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
+#define ftpput_full_usage "\n\n" \
+ "Store a local file on a remote machine via FTP\n" \
+ "\nOptions:" \
+ IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
+ "\n -v,--verbose Verbose" \
+ "\n -u,--username Username" \
+ "\n -p,--password Password" \
+ "\n -P,--port Port number" \
+ ) \
+ IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
+ "\n -v Verbose" \
+ "\n -u Username" \
+ "\n -p Password" \
+ "\n -P Port number" \
+ )
+
+#define fuser_trivial_usage \
+ "[OPTIONS] FILE or PORT/PROTO"
+#define fuser_full_usage "\n\n" \
+ "Find processes which use FILEs or PORTs\n" \
+ "\nOptions:" \
+ "\n -m Find processes which use same fs as FILEs" \
+ "\n -4 Search only IPv4 space" \
+ "\n -6 Search only IPv6 space" \
+ "\n -s Don't display PIDs" \
+ "\n -k Kill found processes" \
+ "\n -SIGNAL Signal to send (default: KILL)" \
+
+#define getenforce_trivial_usage NOUSAGE_STR
+#define getenforce_full_usage ""
+
+#define getopt_trivial_usage \
+ "[OPTIONS]"
+#define getopt_full_usage "\n\n" \
+ "Options:" \
+ IF_LONG_OPTS( \
+ "\n -a,--alternative Allow long options starting with single -" \
+ "\n -l,--longoptions=longopts Long options to be recognized" \
+ "\n -n,--name=progname The name under which errors are reported" \
+ "\n -o,--options=optstring Short options to be recognized" \
+ "\n -q,--quiet Disable error reporting by getopt(3)" \
+ "\n -Q,--quiet-output No normal output" \
+ "\n -s,--shell=shell Set shell quoting conventions" \
+ "\n -T,--test Test for getopt(1) version" \
+ "\n -u,--unquoted Don't quote the output" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -a Allow long options starting with single -" \
+ "\n -l longopts Long options to be recognized" \
+ "\n -n progname The name under which errors are reported" \
+ "\n -o optstring Short options to be recognized" \
+ "\n -q Disable error reporting by getopt(3)" \
+ "\n -Q No normal output" \
+ "\n -s shell Set shell quoting conventions" \
+ "\n -T Test for getopt(1) version" \
+ "\n -u Don't quote the output" \
+ )
+#define getopt_example_usage \
+ "$ cat getopt.test\n" \
+ "#!/bin/sh\n" \
+ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
+ " -n 'example.busybox' -- \"$@\"`\n" \
+ "if [ $? != 0 ]; then exit 1; fi\n" \
+ "eval set -- \"$GETOPT\"\n" \
+ "while true; do\n" \
+ " case $1 in\n" \
+ " -a|--a-long) echo \"Option a\"; shift;;\n" \
+ " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
+ " -c|--c-long)\n" \
+ " case \"$2\" in\n" \
+ " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
+ " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
+ " esac;;\n" \
+ " --) shift; break;;\n" \
+ " *) echo \"Internal error!\"; exit 1;;\n" \
+ " esac\n" \
+ "done\n"
+
+#define getsebool_trivial_usage \
+ "-a or getsebool boolean..."
+#define getsebool_full_usage "\n\n" \
+ " -a Show all selinux booleans"
+
+#define getty_trivial_usage \
+ "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
+#define getty_full_usage "\n\n" \
+ "Open a tty, prompt for a login name, then invoke /bin/login\n" \
+ "\nOptions:" \
+ "\n -h Enable hardware (RTS/CTS) flow control" \
+ "\n -i Don't display /etc/issue before running login" \
+ "\n -L Local line, don't do carrier detect" \
+ "\n -m Get baud rate from modem's CONNECT status message" \
+ "\n -w Wait for a CR or LF before sending /etc/issue" \
+ "\n -n Don't prompt the user for a login name" \
+ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
+ "\n -l LOGIN Invoke LOGIN instead of /bin/login" \
+ "\n -t SEC Terminate after SEC if no username is read" \
+ "\n -I INITSTR Send INITSTR before anything else" \
+ "\n -H HOST Log HOST into the utmp file as the hostname" \
+
+#define grep_trivial_usage \
+ "[-HhnlLoqvsriw" \
+ "F" \
+ IF_FEATURE_GREP_EGREP_ALIAS("E") \
+ IF_EXTRA_COMPAT("z") \
+ "] [-m N] " \
+ IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \
+ "PATTERN/-e PATTERN.../-f FILE [FILE]..."
+#define grep_full_usage "\n\n" \
+ "Search for PATTERN in FILEs (or stdin)\n" \
+ "\nOptions:" \
+ "\n -H Add 'filename:' prefix" \
+ "\n -h Do not add 'filename:' prefix" \
+ "\n -n Add 'line_no:' prefix" \
+ "\n -l Show only names of files that match" \
+ "\n -L Show only names of files that don't match" \
+ "\n -c Show only count of matching lines" \
+ "\n -o Show only the matching part of line" \
+ "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
+ "\n -v Select non-matching lines" \
+ "\n -s Suppress open and read errors" \
+ "\n -r Recurse" \
+ "\n -i Ignore case" \
+ "\n -w Match whole words only" \
+ "\n -F PATTERN is a literal (not regexp)" \
+ IF_FEATURE_GREP_EGREP_ALIAS( \
+ "\n -E PATTERN is an extended regexp" \
+ ) \
+ IF_EXTRA_COMPAT( \
+ "\n -z Input is NUL terminated" \
+ ) \
+ "\n -m N Match up to N times per file" \
+ IF_FEATURE_GREP_CONTEXT( \
+ "\n -A N Print N lines of trailing context" \
+ "\n -B N Print N lines of leading context" \
+ "\n -C N Same as '-A N -B N'" \
+ ) \
+ "\n -e PTRN Pattern to match" \
+ "\n -f FILE Read pattern from file" \
+
+#define grep_example_usage \
+ "$ grep root /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n" \
+ "$ grep ^[rR]oo. /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n"
+
+#define egrep_trivial_usage NOUSAGE_STR
+#define egrep_full_usage ""
+
+#define fgrep_trivial_usage NOUSAGE_STR
+#define fgrep_full_usage ""
+
+#define gunzip_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define gunzip_full_usage "\n\n" \
+ "Decompress FILEs (or stdin)\n" \
+ "\nOptions:" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+ "\n -t Test file integrity" \
+
+#define gunzip_example_usage \
+ "$ ls -la /tmp/BusyBox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
+ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
+ "$ ls -la /tmp/BusyBox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"
+
+#define gzip_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define gzip_full_usage "\n\n" \
+ "Compress FILEs (or stdin)\n" \
+ "\nOptions:" \
+ "\n -d Decompress" \
+ "\n -c Write to stdout" \
+ "\n -f Force" \
+
+#define gzip_example_usage \
+ "$ ls -la /tmp/busybox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
+ "$ gzip /tmp/busybox.tar\n" \
+ "$ ls -la /tmp/busybox*\n" \
+ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"
+
+#define halt_trivial_usage \
+ "[-d DELAY] [-n] [-f]" IF_FEATURE_WTMP(" [-w]")
+#define halt_full_usage "\n\n" \
+ "Halt the system\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for halting" \
+ "\n -n No call to sync()" \
+ "\n -f Force halt (don't go through init)" \
+ IF_FEATURE_WTMP( \
+ "\n -w Only write a wtmp record" \
+ )
+
+#define hdparm_trivial_usage \
+ "[OPTIONS] [DEVICE]"
+#define hdparm_full_usage "\n\n" \
+ "Options:" \
+ "\n -a Get/set fs readahead" \
+ "\n -A Set drive read-lookahead flag (0/1)" \
+ "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
+ "\n -B Set Advanced Power Management setting (1-255)" \
+ "\n -c Get/set IDE 32-bit IO setting" \
+ "\n -C Check IDE power mode status" \
+ IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
+ "\n -d Get/set using_dma flag") \
+ "\n -D Enable/disable drive defect-mgmt" \
+ "\n -f Flush buffer cache for device on exit" \
+ "\n -g Display drive geometry" \
+ "\n -h Display terse usage information" \
+ IF_FEATURE_HDPARM_GET_IDENTITY( \
+ "\n -i Display drive identification") \
+ IF_FEATURE_HDPARM_GET_IDENTITY( \
+ "\n -I Detailed/current information directly from drive") \
+ "\n -k Get/set keep_settings_over_reset flag (0/1)" \
+ "\n -K Set drive keep_features_over_reset flag (0/1)" \
+ "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
+ "\n -m Get/set multiple sector count" \
+ "\n -n Get/set ignore-write-errors flag (0/1)" \
+ "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
+ "\n -P Set drive prefetch count" \
+/* "\n -q Change next setting quietly" - not supported ib bbox */ \
+ "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
+ "\n -r Get/set readonly flag (DANGEROUS to set)" \
+ IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
+ "\n -R Register an IDE interface (DANGEROUS)") \
+ "\n -S Set standby (spindown) timeout" \
+ "\n -t Perform device read timings" \
+ "\n -T Perform cache read timings" \
+ "\n -u Get/set unmaskirq flag (0/1)" \
+ IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
+ "\n -U Unregister an IDE interface (DANGEROUS)") \
+ "\n -v Defaults; same as -mcudkrag for IDE drives" \
+ "\n -V Display program version and exit immediately" \
+ IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
+ "\n -w Perform device reset (DANGEROUS)") \
+ "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
+ IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
+ "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
+ "\n -X Set IDE xfer mode (DANGEROUS)" \
+ "\n -y Put IDE drive in standby mode" \
+ "\n -Y Put IDE drive to sleep" \
+ "\n -Z Disable Seagate auto-powersaving mode" \
+ "\n -z Reread partition table" \
+
+#define head_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define head_full_usage "\n\n" \
+ "Print first 10 lines of each FILE (or stdin) to stdout.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
+ "\nOptions:" \
+ "\n -n N[kbm] Print first N lines" \
+ IF_FEATURE_FANCY_HEAD( \
+ "\n -c N[kbm] Print first N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ ) \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
+
+#define head_example_usage \
+ "$ head -n 2 /etc/passwd\n" \
+ "root:x:0:0:root:/root:/bin/bash\n" \
+ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"
+
+#define tail_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define tail_full_usage "\n\n" \
+ "Print last 10 lines of each FILE (or stdin) to stdout.\n" \
+ "With more than one FILE, precede each with a filename header.\n" \
+ "\nOptions:" \
+ "\n -f Print data as file grows" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -s SECONDS Wait SECONDS between reads with -f" \
+ ) \
+ "\n -n N[kbm] Print last N lines" \
+ IF_FEATURE_FANCY_TAIL( \
+ "\n -c N[kbm] Print last N bytes" \
+ "\n -q Never print headers" \
+ "\n -v Always print headers" \
+ "\n" \
+ "\nN may be suffixed by k (x1024), b (x512), or m (x1024^2)." \
+ "\nIf N starts with a '+', output begins with the Nth item from the start" \
+ "\nof each file, not from the end." \
+ ) \
+
+#define tail_example_usage \
+ "$ tail -n 1 /etc/resolv.conf\n" \
+ "nameserver 10.0.0.1\n"
+
+#define hexdump_trivial_usage \
+ "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
+#define hexdump_full_usage "\n\n" \
+ "Display FILEs (or stdin) in a user specified format\n" \
+ "\nOptions:" \
+ "\n -b One-byte octal display" \
+ "\n -c One-byte character display" \
+ "\n -C Canonical hex+ASCII, 16 bytes per line" \
+ "\n -d Two-byte decimal display" \
+ "\n -e FORMAT STRING" \
+ "\n -f FORMAT FILE" \
+ "\n -n LENGTH Interpret only LENGTH bytes of input" \
+ "\n -o Two-byte octal display" \
+ "\n -s OFFSET Skip OFFSET bytes" \
+ "\n -v Display all input data" \
+ "\n -x Two-byte hexadecimal display" \
+ IF_FEATURE_HEXDUMP_REVERSE( \
+ "\n -R Reverse of 'hexdump -Cv'") \
+
+#define hd_trivial_usage \
+ "FILE..."
+#define hd_full_usage "\n\n" \
+ "hd is an alias for hexdump -C"
+
+#define hostid_trivial_usage \
+ ""
+#define hostid_full_usage "\n\n" \
+ "Print out a unique 32-bit identifier for the machine"
+
+#define hostname_trivial_usage \
+ "[OPTIONS] [HOSTNAME | -F FILE]"
+#define hostname_full_usage "\n\n" \
+ "Get or set hostname or DNS domain name\n" \
+ "\nOptions:" \
+ "\n -s Short" \
+ "\n -i Addresses for the hostname" \
+ "\n -d DNS domain name" \
+ "\n -f Fully qualified domain name" \
+ "\n -F FILE Use FILE's content as hostname" \
+
+#define hostname_example_usage \
+ "$ hostname\n" \
+ "sage\n"
+
+#define dnsdomainname_trivial_usage NOUSAGE_STR
+#define dnsdomainname_full_usage ""
+
+#define httpd_trivial_usage \
+ "[-ifv[v]]" \
+ " [-c CONFFILE]" \
+ " [-p [IP:]PORT]" \
+ IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
+ IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
+ " [-h HOME]\n" \
+ "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
+#define httpd_full_usage "\n\n" \
+ "Listen for incoming HTTP requests\n" \
+ "\nOptions:" \
+ "\n -i Inetd mode" \
+ "\n -f Don't daemonize" \
+ "\n -v[v] Verbose" \
+ "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
+ IF_FEATURE_HTTPD_SETUID( \
+ "\n -u USER[:GRP] Set uid/gid after binding to port") \
+ IF_FEATURE_HTTPD_BASIC_AUTH( \
+ "\n -r REALM Authentication Realm for Basic Authentication") \
+ "\n -h HOME Home directory (default .)" \
+ "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
+ IF_FEATURE_HTTPD_AUTH_MD5( \
+ "\n -m STRING MD5 crypt STRING") \
+ "\n -e STRING HTML encode STRING" \
+ "\n -d STRING URL decode STRING" \
+
+#define hwclock_trivial_usage \
+ IF_FEATURE_HWCLOCK_LONG_OPTIONS( \
+ "[-r|--show] [-s|--hctosys] [-w|--systohc]" \
+ " [-l|--localtime] [-u|--utc]" \
+ " [-f FILE]" \
+ ) \
+ IF_NOT_FEATURE_HWCLOCK_LONG_OPTIONS( \
+ "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
+ )
+#define hwclock_full_usage "\n\n" \
+ "Query and set hardware clock (RTC)\n" \
+ "\nOptions:" \
+ "\n -r Show hardware clock time" \
+ "\n -s Set system time from hardware clock" \
+ "\n -w Set hardware clock to system time" \
+ "\n -u Hardware clock is in UTC" \
+ "\n -l Hardware clock is in local time" \
+ "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
+
+#define id_trivial_usage \
+ "[OPTIONS] [USER]"
+#define id_full_usage "\n\n" \
+ "Print information about USER or the current user\n" \
+ "\nOptions:" \
+ IF_SELINUX( \
+ "\n -Z Print the security context" \
+ ) \
+ "\n -u Print user ID" \
+ "\n -g Print group ID" \
+ "\n -G Print supplementary group IDs" \
+ "\n -n Print name instead of a number" \
+ "\n -r Print real user ID instead of effective ID" \
+
+#define id_example_usage \
+ "$ id\n" \
+ "uid=1000(andersen) gid=1000(andersen)\n"
+
+#define ifconfig_trivial_usage \
+ IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
+#define ifconfig_full_usage "\n\n" \
+ "Configure a network interface\n" \
+ "\nOptions:" \
+ "\n" \
+ IF_FEATURE_IPV6( \
+ " [add ADDRESS[/PREFIXLEN]]\n") \
+ IF_FEATURE_IPV6( \
+ " [del ADDRESS[/PREFIXLEN]]\n") \
+ " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
+ " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
+ IF_FEATURE_IFCONFIG_SLIP( \
+ " [outfill NN] [keepalive NN]\n") \
+ " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
+ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
+ " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
+ IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
+ " [mem_start NN] [io_addr NN] [irq NN]\n") \
+ " [up|down] ..."
+
+#define ifenslave_trivial_usage \
+ "[-cdf] MASTER_IFACE SLAVE_IFACE..."
+#define ifenslave_full_usage "\n\n" \
+ "Configure network interfaces for parallel routing\n" \
+ "\nOptions:" \
+ "\n -c, --change-active Change active slave" \
+ "\n -d, --detach Remove slave interface from bonding device" \
+ "\n -f, --force Force, even if interface is not Ethernet" \
+/* "\n -r, --receive-slave Create a receive-only slave" */
+
+#define ifenslave_example_usage \
+ "To create a bond device, simply follow these three steps:\n" \
+ "- ensure that the required drivers are properly loaded:\n" \
+ " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
+ "- assign an IP address to the bond device:\n" \
+ " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
+ "- attach all the interfaces you need to the bond device:\n" \
+ " # ifenslave bond0 eth0 eth1 eth2\n" \
+ " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
+ " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
+ " To detach a dead interface without setting the bond device down:\n" \
+ " # ifenslave -d bond0 eth1\n\n" \
+ " To set the bond device down and automatically release all the slaves:\n" \
+ " # ifconfig bond0 down\n\n" \
+ " To change active slave:\n" \
+ " # ifenslave -c bond0 eth0\n" \
+
+#define ifplugd_trivial_usage \
+ "[OPTIONS]"
+#define ifplugd_full_usage "\n\n" \
+ "Network interface plug detection daemon\n" \
+ "\nOptions:" \
+ "\n -n Don't daemonize" \
+ "\n -s Don't log to syslog" \
+ "\n -i IFACE Interface" \
+ "\n -f/-F Treat link detection error as link down/link up" \
+ "\n (otherwise exit on error)" \
+ "\n -a Don't up interface at each link probe" \
+ "\n -M Monitor creation/destruction of interface" \
+ "\n (otherwise it must exist)" \
+ "\n -r PROG Script to run" \
+ "\n -x ARG Extra argument for script" \
+ "\n -I Don't exit on nonzero exit code from script" \
+ "\n -p Don't run script on daemon startup" \
+ "\n -q Don't run script on daemon quit" \
+ "\n -l Run script on startup even if no cable is detected" \
+ "\n -t SECS Poll time in seconds" \
+ "\n -u SECS Delay before running script after link up" \
+ "\n -d SECS Delay after link down" \
+ "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
+ "\n -k Kill running daemon" \
+
+#define ifup_trivial_usage \
+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..."
+#define ifup_full_usage "\n\n" \
+ "Options:" \
+ "\n -a De/configure all interfaces automatically" \
+ "\n -i FILE Use FILE for interface definitions" \
+ "\n -n Print out what would happen, but don't do it" \
+ IF_FEATURE_IFUPDOWN_MAPPING( \
+ "\n (note: doesn't disable mappings)" \
+ "\n -m Don't run any mappings" \
+ ) \
+ "\n -v Print out what would happen before doing it" \
+ "\n -f Force de/configuration" \
+
+#define ifdown_trivial_usage \
+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..."
+#define ifdown_full_usage "\n\n" \
+ "Options:" \
+ "\n -a De/configure all interfaces automatically" \
+ "\n -i FILE Use FILE for interface definitions" \
+ "\n -n Print out what would happen, but don't do it" \
+ IF_FEATURE_IFUPDOWN_MAPPING( \
+ "\n (note: doesn't disable mappings)" \
+ "\n -m Don't run any mappings" \
+ ) \
+ "\n -v Print out what would happen before doing it" \
+ "\n -f Force de/configuration" \
+
+#define inetd_trivial_usage \
+ "[-fe] [-q N] [-R N] [CONFFILE]"
+#define inetd_full_usage "\n\n" \
+ "Listen for network connections and launch programs\n" \
+ "\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -e Log to stderr" \
+ "\n -q N Socket listen queue (default: 128)" \
+ "\n -R N Pause services after N connects/min" \
+ "\n (default: 0 - disabled)" \
+
+#define init_trivial_usage \
+ ""
+#define init_full_usage "\n\n" \
+ "Init is the parent of all processes"
+
+#define init_notes_usage \
+"This version of init is designed to be run only by the kernel.\n" \
+"\n" \
+"BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \
+"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \
+"runlevels, use sysvinit.\n" \
+"\n" \
+"BusyBox init works just fine without an inittab. If no inittab is found,\n" \
+"it has the following default behavior:\n" \
+"\n" \
+" ::sysinit:/etc/init.d/rcS\n" \
+" ::askfirst:/bin/sh\n" \
+" ::ctrlaltdel:/sbin/reboot\n" \
+" ::shutdown:/sbin/swapoff -a\n" \
+" ::shutdown:/bin/umount -a -r\n" \
+" ::restart:/sbin/init\n" \
+"\n" \
+"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
+"\n" \
+" tty2::askfirst:/bin/sh\n" \
+" tty3::askfirst:/bin/sh\n" \
+" tty4::askfirst:/bin/sh\n" \
+"\n" \
+"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
+"\n" \
+" <id>:<runlevels>:<action>:<process>\n" \
+"\n" \
+" <id>:\n" \
+"\n" \
+" WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
+" The id field is used by BusyBox init to specify the controlling tty for\n" \
+" the specified process to run on. The contents of this field are\n" \
+" appended to \"/dev/\" and used as-is. There is no need for this field to\n" \
+" be unique, although if it isn't you may have strange results. If this\n" \
+" field is left blank, the controlling tty is set to the console. Also\n" \
+" note that if BusyBox detects that a serial console is in use, then only\n" \
+" entries whose controlling tty is either the serial console or /dev/null\n" \
+" will be run. BusyBox init does nothing with utmp. We don't need no\n" \
+" stinkin' utmp.\n" \
+"\n" \
+" <runlevels>:\n" \
+"\n" \
+" The runlevels field is completely ignored.\n" \
+"\n" \
+" <action>:\n" \
+"\n" \
+" Valid actions include: sysinit, respawn, askfirst, wait,\n" \
+" once, restart, ctrlaltdel, and shutdown.\n" \
+"\n" \
+" The available actions can be classified into two groups: actions\n" \
+" that are run only once, and actions that are re-run when the specified\n" \
+" process exits.\n" \
+"\n" \
+" Run only-once actions:\n" \
+"\n" \
+" 'sysinit' is the first item run on boot. init waits until all\n" \
+" sysinit actions are completed before continuing. Following the\n" \
+" completion of all sysinit actions, all 'wait' actions are run.\n" \
+" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \
+" the specified task completes. 'once' actions are asynchronous,\n" \
+" therefore, init does not wait for them to complete. 'restart' is\n" \
+" the action taken to restart the init process. By default this should\n" \
+" simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
+" can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \
+" actions are run when the system detects that someone on the system\n" \
+" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \
+" wants to run 'reboot' at this point to cause the system to reboot.\n" \
+" Finally the 'shutdown' action specifies the actions to taken when\n" \
+" init is told to reboot. Unmounting filesystems and disabling swap\n" \
+" is a very good here.\n" \
+"\n" \
+" Run repeatedly actions:\n" \
+"\n" \
+" 'respawn' actions are run after the 'once' actions. When a process\n" \
+" started with a 'respawn' action exits, init automatically restarts\n" \
+" it. Unlike sysvinit, BusyBox init does not stop processes from\n" \
+" respawning out of control. The 'askfirst' actions acts just like\n" \
+" respawn, except that before running the specified process it\n" \
+" displays the line \"Please press Enter to activate this console.\"\n" \
+" and then waits for the user to press enter before starting the\n" \
+" specified process.\n" \
+"\n" \
+" Unrecognized actions (like initdefault) will cause init to emit an\n" \
+" error message, and then go along with its business. All actions are\n" \
+" run in the order they appear in /etc/inittab.\n" \
+"\n" \
+" <process>:\n" \
+"\n" \
+" Specifies the process to be executed and its command line.\n" \
+"\n" \
+"Example /etc/inittab file:\n" \
+"\n" \
+" # This is run first except when booting in single-user mode\n" \
+" #\n" \
+" ::sysinit:/etc/init.d/rcS\n" \
+" \n" \
+" # /bin/sh invocations on selected ttys\n" \
+" #\n" \
+" # Start an \"askfirst\" shell on the console (whatever that may be)\n" \
+" ::askfirst:-/bin/sh\n" \
+" # Start an \"askfirst\" shell on /dev/tty2-4\n" \
+" tty2::askfirst:-/bin/sh\n" \
+" tty3::askfirst:-/bin/sh\n" \
+" tty4::askfirst:-/bin/sh\n" \
+" \n" \
+" # /sbin/getty invocations for selected ttys\n" \
+" #\n" \
+" tty4::respawn:/sbin/getty 38400 tty4\n" \
+" tty5::respawn:/sbin/getty 38400 tty5\n" \
+" \n" \
+" \n" \
+" # Example of how to put a getty on a serial line (for a terminal)\n" \
+" #\n" \
+" #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
+" #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
+" #\n" \
+" # Example how to put a getty on a modem line\n" \
+" #::respawn:/sbin/getty 57600 ttyS2\n" \
+" \n" \
+" # Stuff to do when restarting the init process\n" \
+" ::restart:/sbin/init\n" \
+" \n" \
+" # Stuff to do before rebooting\n" \
+" ::ctrlaltdel:/sbin/reboot\n" \
+" ::shutdown:/bin/umount -a -r\n" \
+" ::shutdown:/sbin/swapoff -a\n"
+
+#define inotifyd_trivial_usage \
+ "PROG FILE1[:MASK]..."
+#define inotifyd_full_usage "\n\n" \
+ "Run PROG on filesystem changes." \
+ "\nWhen a filesystem event matching MASK occurs on FILEn," \
+ "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
+ "\nEvents:" \
+ "\n a File is accessed" \
+ "\n c File is modified" \
+ "\n e Metadata changed" \
+ "\n w Writable file is closed" \
+ "\n 0 Unwritable file is closed" \
+ "\n r File is opened" \
+ "\n D File is deleted" \
+ "\n M File is moved" \
+ "\n u Backing fs is unmounted" \
+ "\n o Event queue overflowed" \
+ "\n x File can't be watched anymore" \
+ "\nIf watching a directory:" \
+ "\n m Subfile is moved into dir" \
+ "\n y Subfile is moved out of dir" \
+ "\n n Subfile is created" \
+ "\n d Subfile is deleted" \
+ "\n" \
+ "\ninotifyd waits for PROG to exit." \
+ "\nWhen x event happens for all FILEs, inotifyd exits." \
+
+/* 2.6 style insmod has no options and required filename
+ * (not module name - .ko can't be omitted) */
+#define insmod_trivial_usage \
+ IF_FEATURE_2_4_MODULES("[OPTIONS] MODULE ") \
+ IF_NOT_FEATURE_2_4_MODULES("FILE ") \
+ "[symbol=value]..."
+#define insmod_full_usage "\n\n" \
+ "Load the specified kernel modules into the kernel" \
+ IF_FEATURE_2_4_MODULES( "\n" \
+ "\nOptions:" \
+ "\n -f Force module to load into the wrong kernel version" \
+ "\n -k Make module autoclean-able" \
+ "\n -v Verbose" \
+ "\n -q Quiet" \
+ "\n -L Lock to prevent simultaneous loads of a module" \
+ IF_FEATURE_INSMOD_LOAD_MAP( \
+ "\n -m Output load map to stdout" \
+ ) \
+ "\n -o NAME Set internal module name to NAME" \
+ "\n -x Don't export externs" \
+ )
+
+/* -v, -b, -c are ignored */
+#define install_trivial_usage \
+ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST"
+#define install_full_usage "\n\n" \
+ "Copy files and set attributes\n" \
+ "\nOptions:" \
+ "\n -c Just copy (default)" \
+ "\n -d Create directories" \
+ "\n -D Create leading target directories" \
+ "\n -s Strip symbol table" \
+ "\n -p Preserve date" \
+ "\n -o USER Set ownership" \
+ "\n -g GRP Set group ownership" \
+ "\n -m MODE Set permissions" \
+ IF_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
+#define ionice_trivial_usage \
+ "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
+#define ionice_full_usage "\n\n" \
+ "Change I/O scheduling class and priority\n" \
+ "\nOptions:" \
+ "\n -c Class. 1:realtime 2:best-effort 3:idle" \
+ "\n -n Priority" \
+
+/* would need to make the " | " optional depending on more than one selected: */
+#define ip_trivial_usage \
+ "[OPTIONS] {" \
+ IF_FEATURE_IP_ADDRESS("address | ") \
+ IF_FEATURE_IP_ROUTE("route | ") \
+ IF_FEATURE_IP_LINK("link | ") \
+ IF_FEATURE_IP_TUNNEL("tunnel | ") \
+ IF_FEATURE_IP_RULE("rule") \
+ "} {COMMAND}"
+#define ip_full_usage "\n\n" \
+ "ip [OPTIONS] OBJECT {COMMAND}\n" \
+ "where OBJECT := {" \
+ IF_FEATURE_IP_ADDRESS("address | ") \
+ IF_FEATURE_IP_ROUTE("route | ") \
+ IF_FEATURE_IP_LINK("link | ") \
+ IF_FEATURE_IP_TUNNEL("tunnel | ") \
+ IF_FEATURE_IP_RULE("rule") \
+ "}\n" \
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
+
+#define ipaddr_trivial_usage \
+ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
+ " [dev STRING] [to PREFIX] }"
+#define ipaddr_full_usage "\n\n" \
+ "ipaddr {add|delete} IFADDR dev STRING\n" \
+ "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
+ " [to PREFIX] [label PATTERN]\n" \
+ " IFADDR := PREFIX | ADDR peer PREFIX\n" \
+ " [broadcast ADDR] [anycast ADDR]\n" \
+ " [label STRING] [scope SCOPE-ID]\n" \
+ " SCOPE-ID := [host | link | global | NUMBER]" \
+
+#define ipcalc_trivial_usage \
+ "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
+#define ipcalc_full_usage "\n\n" \
+ "Calculate IP network settings from a IP address\n" \
+ "\nOptions:" \
+ IF_FEATURE_IPCALC_LONG_OPTIONS( \
+ "\n -b,--broadcast Display calculated broadcast address" \
+ "\n -n,--network Display calculated network address" \
+ "\n -m,--netmask Display default netmask for IP" \
+ IF_FEATURE_IPCALC_FANCY( \
+ "\n -p,--prefix Display the prefix for IP/NETMASK" \
+ "\n -h,--hostname Display first resolved host name" \
+ "\n -s,--silent Don't ever display error messages" \
+ ) \
+ ) \
+ IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
+ "\n -b Display calculated broadcast address" \
+ "\n -n Display calculated network address" \
+ "\n -m Display default netmask for IP" \
+ IF_FEATURE_IPCALC_FANCY( \
+ "\n -p Display the prefix for IP/NETMASK" \
+ "\n -h Display first resolved host name" \
+ "\n -s Don't ever display error messages" \
+ ) \
+ )
+
+#define ipcrm_trivial_usage \
+ "[-MQS key] [-mqs id]"
+#define ipcrm_full_usage "\n\n" \
+ "Upper-case options MQS remove an object by shmkey value.\n" \
+ "Lower-case options remove an object by shmid value.\n" \
+ "\nOptions:" \
+ "\n -mM Remove memory segment after last detach" \
+ "\n -qQ Remove message queue" \
+ "\n -sS Remove semaphore" \
+
+#define ipcs_trivial_usage \
+ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
+#define ipcs_full_usage "\n\n" \
+ " -i Show specific resource" \
+ "\nResource specification:" \
+ "\n -m Shared memory segments" \
+ "\n -q Message queues" \
+ "\n -s Semaphore arrays" \
+ "\n -a All (default)" \
+ "\nOutput format:" \
+ "\n -t Time" \
+ "\n -c Creator" \
+ "\n -p Pid" \
+ "\n -l Limits" \
+ "\n -u Summary" \
+
+#define iplink_trivial_usage \
+ "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
+#define iplink_full_usage "\n\n" \
+ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
+ " dynamic { on | off } |\n" \
+ " mtu MTU }\n" \
+ "iplink show [DEVICE]" \
+
+#define iproute_trivial_usage \
+ "{ list | flush | { add | del | change | append |\n" \
+ " replace | monitor } ROUTE }"
+#define iproute_full_usage "\n\n" \
+ "iproute { list | flush } SELECTOR\n" \
+ "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
+ " [oif STRING] [tos TOS]\n" \
+ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
+ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
+ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
+ " [metric METRIC]" \
+
+#define iprule_trivial_usage \
+ "{[list | add | del] RULE}"
+#define iprule_full_usage "\n\n" \
+ "iprule [list | add | del] SELECTOR ACTION\n" \
+ " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
+ " [dev STRING] [pref NUMBER]\n" \
+ " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
+ " [prohibit | reject | unreachable]\n" \
+ " [realms [SRCREALM/]DSTREALM]\n" \
+ " TABLE_ID := [local | main | default | NUMBER]" \
+
+#define iptunnel_trivial_usage \
+ "{ add | change | del | show } [NAME]\n" \
+ " [mode { ipip | gre | sit }]\n" \
+ " [remote ADDR] [local ADDR] [ttl TTL]"
+#define iptunnel_full_usage "\n\n" \
+ "iptunnel { add | change | del | show } [NAME]\n" \
+ " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
+ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
+ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
+
+#define kbd_mode_trivial_usage \
+ "[-a|k|s|u] [-C TTY]"
+#define kbd_mode_full_usage "\n\n" \
+ "Report or set the keyboard mode\n" \
+ "\nOptions:" \
+ "\n -a Default (ASCII)" \
+ "\n -k Medium-raw (keyboard)" \
+ "\n -s Raw (scancode)" \
+ "\n -u Unicode (utf-8)" \
+ "\n -C TTY Affect TTY instead of /dev/tty" \
+
+#define kill_trivial_usage \
+ "[-l] [-SIG] PID..."
+#define kill_full_usage "\n\n" \
+ "Send a signal (default: TERM) to given PIDs\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
+
+#define kill_example_usage \
+ "$ ps | grep apache\n" \
+ "252 root root S [apache]\n" \
+ "263 www-data www-data S [apache]\n" \
+ "264 www-data www-data S [apache]\n" \
+ "265 www-data www-data S [apache]\n" \
+ "266 www-data www-data S [apache]\n" \
+ "267 www-data www-data S [apache]\n" \
+ "$ kill 252\n"
+
+#define killall_trivial_usage \
+ "[-l] [-q] [-SIG] PROCESS_NAME..."
+#define killall_full_usage "\n\n" \
+ "Send a signal (default: TERM) to given processes\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
+ "\n -q Don't complain if no processes were killed" \
+
+#define killall_example_usage \
+ "$ killall apache\n"
+
+#define killall5_trivial_usage \
+ "[-l] [-SIG] [-o PID]..."
+#define killall5_full_usage "\n\n" \
+ "Send a signal (default: TERM) to all processes outside current session\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
+ "\n -o PID Don't signal this PID" \
+/* "\n -s SIG Yet another way of specifying SIG" */ \
+
+#define klogd_trivial_usage \
+ "[-c N] [-n]"
+#define klogd_full_usage "\n\n" \
+ "Kernel logger\n" \
+ "\nOptions:" \
+ "\n -c N Only messages with level < N are printed to console" \
+ "\n -n Run in foreground" \
+
+#define length_trivial_usage \
+ "STRING"
+#define length_full_usage "\n\n" \
+ "Print STRING's length"
+
+#define length_example_usage \
+ "$ length Hello\n" \
+ "5\n"
+
+#define less_trivial_usage \
+ "[-EMNmh~I?] [FILE]..."
+#define less_full_usage "\n\n" \
+ "View FILE (or stdin) one screenful at a time\n" \
+ "\nOptions:" \
+ "\n -E Quit once the end of a file is reached" \
+ "\n -M,-m Display status line with line numbers" \
+ "\n and percentage through the file" \
+ "\n -N Prefix line number to each line" \
+ "\n -I Ignore case in all searches" \
+ "\n -~ Suppress ~s displayed past the end of the file" \
+
+#define linux32_trivial_usage NOUSAGE_STR
+#define linux32_full_usage ""
+#define linux64_trivial_usage NOUSAGE_STR
+#define linux64_full_usage ""
+
+#define linuxrc_trivial_usage NOUSAGE_STR
+#define linuxrc_full_usage ""
+
+#define setarch_trivial_usage \
+ "personality PROG ARGS"
+#define setarch_full_usage "\n\n" \
+ "Personality may be:\n" \
+ " linux32 Set 32bit uname emulation\n" \
+ " linux64 Set 64bit uname emulation" \
+
+#define ln_trivial_usage \
+ "[OPTIONS] TARGET... LINK|DIR"
+#define ln_full_usage "\n\n" \
+ "Create a link LINK or DIR/TARGET to the specified TARGET(s)\n" \
+ "\nOptions:" \
+ "\n -s Make symlinks instead of hardlinks" \
+ "\n -f Remove existing destinations" \
+ "\n -n Don't dereference symlinks - treat like normal file" \
+ "\n -b Make a backup of the target (if exists) before link operation" \
+ "\n -S suf Use suffix instead of ~ when making backup files" \
+
+#define ln_example_usage \
+ "$ ln -s BusyBox /tmp/ls\n" \
+ "$ ls -l /tmp/ls\n" \
+ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n"
+
+#define load_policy_trivial_usage NOUSAGE_STR
+#define load_policy_full_usage ""
+
+#define loadfont_trivial_usage \
+ "< font"
+#define loadfont_full_usage "\n\n" \
+ "Load a console font from stdin" \
+/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
+
+#define loadfont_example_usage \
+ "$ loadfont < /etc/i18n/fontname\n"
+
+#define loadkmap_trivial_usage \
+ "< keymap"
+#define loadkmap_full_usage "\n\n" \
+ "Load a binary keyboard translation table from stdin\n" \
+/* "\n -C TTY Affect TTY instead of /dev/tty" */ \
+
+#define loadkmap_example_usage \
+ "$ loadkmap < /etc/i18n/lang-keymap\n"
+
+#define logger_trivial_usage \
+ "[OPTIONS] [MESSAGE]"
+#define logger_full_usage "\n\n" \
+ "Write MESSAGE (or stdin) to syslog\n" \
+ "\nOptions:" \
+ "\n -s Log to stderr as well as the system log" \
+ "\n -t TAG Log using the specified tag (defaults to user name)" \
+ "\n -p PRIO Priority (numeric or facility.level pair)" \
+
+#define logger_example_usage \
+ "$ logger \"hello\"\n"
+
+#define login_trivial_usage \
+ "[-p] [-h HOST] [[-f] USER]"
+#define login_full_usage "\n\n" \
+ "Begin a new session on the system\n" \
+ "\nOptions:" \
+ "\n -f Don't authenticate (user already authenticated)" \
+ "\n -h Name of the remote host" \
+ "\n -p Preserve environment" \
+
+#define logname_trivial_usage \
+ ""
+#define logname_full_usage "\n\n" \
+ "Print the name of the current user"
+#define logname_example_usage \
+ "$ logname\n" \
+ "root\n"
+
+#define logread_trivial_usage \
+ "[OPTIONS]"
+#define logread_full_usage "\n\n" \
+ "Show messages in syslogd's circular buffer\n" \
+ "\nOptions:" \
+ "\n -f Output data as log grows" \
+
+#define losetup_trivial_usage \
+ "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
+ " losetup -d LOOPDEV - disassociate\n" \
+ " losetup [-f] - show"
+#define losetup_full_usage "\n\n" \
+ "Options:" \
+ "\n -o OFS Start OFS bytes into FILE" \
+ "\n -f Show first free loop device" \
+
+#define losetup_notes_usage \
+ "No arguments will display all current associations.\n" \
+ "One argument (losetup /dev/loop1) will display the current association\n" \
+ "(if any), or disassociate it (with -d). The display shows the offset\n" \
+ "and filename of the file the loop device is currently bound to.\n\n" \
+ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
+ "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
+ "losetup -f will show the first loop free loop device\n\n"
+
+#define lpd_trivial_usage \
+ "SPOOLDIR [HELPER [ARGS]]"
+#define lpd_full_usage "\n\n" \
+ "SPOOLDIR must contain (symlinks to) device nodes or directories" \
+ "\nwith names matching print queue names. In the first case, jobs are" \
+ "\nsent directly to the device. Otherwise each job is stored in queue" \
+ "\ndirectory and HELPER program is called. Name of file to print" \
+ "\nis passed in $DATAFILE variable." \
+ "\nExample:" \
+ "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
+
+#define lpq_trivial_usage \
+ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
+#define lpq_full_usage "\n\n" \
+ "Options:" \
+ "\n -P lp service to connect to (else uses $PRINTER)" \
+ "\n -d Delete jobs" \
+ "\n -f Force any waiting job to be printed" \
+ "\n -s Short display" \
+
+#define lpr_trivial_usage \
+ "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
+/* -C CLASS exists too, not shown.
+ * CLASS is supposed to be printed on banner page, if one is requested */
+#define lpr_full_usage "\n\n" \
+ "Options:" \
+ "\n -P lp service to connect to (else uses $PRINTER)"\
+ "\n -m Send mail on completion" \
+ "\n -h Print banner page too" \
+ "\n -V Verbose" \
+
+#define ls_trivial_usage \
+ "[-1Aa" IF_FEATURE_LS_TIMESTAMPS("c") "Cd" \
+ IF_FEATURE_LS_TIMESTAMPS("e") IF_FEATURE_LS_FILETYPES("F") "iln" \
+ IF_FEATURE_LS_FILETYPES("p") IF_FEATURE_LS_FOLLOWLINKS("L") \
+ IF_FEATURE_LS_RECURSIVE("R") IF_FEATURE_LS_SORTFILES("rS") "s" \
+ IF_FEATURE_AUTOWIDTH("T") IF_FEATURE_LS_TIMESTAMPS("tu") \
+ IF_FEATURE_LS_SORTFILES("v") IF_FEATURE_AUTOWIDTH("w") "x" \
+ IF_FEATURE_LS_SORTFILES("X") IF_FEATURE_HUMAN_READABLE("h") "k" \
+ IF_SELINUX("K") "] [FILE]..."
+#define ls_full_usage "\n\n" \
+ "List directory contents\n" \
+ "\nOptions:" \
+ "\n -1 List in a single column" \
+ "\n -A Don't list . and .." \
+ "\n -a Don't hide entries starting with ." \
+ "\n -C List by columns" \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -c With -l: sort by ctime") \
+ IF_FEATURE_LS_COLOR( \
+ "\n --color[={always,never,auto}] Control coloring") \
+ "\n -d List directory entries instead of contents" \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -e List full date and time") \
+ IF_FEATURE_LS_FILETYPES( \
+ "\n -F Append indicator (one of */=@|) to entries") \
+ "\n -i List inode numbers" \
+ "\n -l Long listing format" \
+ "\n -n List numeric UIDs and GIDs instead of names" \
+ IF_FEATURE_LS_FILETYPES( \
+ "\n -p Append indicator (one of /=@|) to entries") \
+ IF_FEATURE_LS_FOLLOWLINKS( \
+ "\n -L List entries pointed to by symlinks") \
+ IF_FEATURE_LS_RECURSIVE( \
+ "\n -R Recurse") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -r Sort in reverse order") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -S Sort by file size") \
+ "\n -s List the size of each file, in blocks" \
+ IF_FEATURE_AUTOWIDTH( \
+ "\n -T N Assume tabstop every N columns") \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -t With -l: sort by modification time") \
+ IF_FEATURE_LS_TIMESTAMPS( \
+ "\n -u With -l: sort by access time") \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -v Sort by version") \
+ IF_FEATURE_AUTOWIDTH( \
+ "\n -w N Assume the terminal is N columns wide") \
+ "\n -x List by lines" \
+ IF_FEATURE_LS_SORTFILES( \
+ "\n -X Sort by extension") \
+ IF_FEATURE_HUMAN_READABLE( \
+ "\n -h List sizes in human readable format (1K 243M 2G)") \
+ IF_SELINUX( \
+ "\n -k List security context") \
+ IF_SELINUX( \
+ "\n -K List security context in long format") \
+ IF_SELINUX( \
+ "\n -Z List security context and permission") \
+
+#define lsattr_trivial_usage \
+ "[-Radlv] [FILE]..."
+#define lsattr_full_usage "\n\n" \
+ "List file attributes on an ext2 fs\n" \
+ "\nOptions:" \
+ "\n -R Recurse" \
+ "\n -a Don't hide entries starting with ." \
+ "\n -d List directory entries instead of contents" \
+ "\n -l List long flag names" \
+ "\n -v List the file's version/generation number" \
+
+#define lsmod_trivial_usage \
+ ""
+#define lsmod_full_usage "\n\n" \
+ "List the currently loaded kernel modules"
+
+#define lspci_trivial_usage \
+ "[-mk]"
+#define lspci_full_usage "\n\n" \
+ "List all PCI devices" \
+ "\n" \
+ "\n -m Parseable output" \
+ "\n -k Show driver" \
+
+#define lsusb_trivial_usage NOUSAGE_STR
+#define lsusb_full_usage ""
+
+#if ENABLE_FEATURE_MAKEDEVS_LEAF
+#define makedevs_trivial_usage \
+ "NAME TYPE MAJOR MINOR FIRST LAST [s]"
+#define makedevs_full_usage "\n\n" \
+ "Create a range of block or character special files" \
+ "\n" \
+ "\nTYPE is:" \
+ "\n b Block device" \
+ "\n c Character device" \
+ "\n f FIFO, MAJOR and MINOR are ignored" \
+ "\n" \
+ "\nFIRST..LAST specify numbers appended to NAME." \
+ "\nIf 's' is the last argument, the base device is created as well." \
+ "\n" \
+ "\nExamples:" \
+ "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
+ "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
+#define makedevs_example_usage \
+ "# makedevs /dev/ttyS c 4 66 2 63\n" \
+ "[creates ttyS2-ttyS63]\n" \
+ "# makedevs /dev/hda b 3 0 0 8 s\n" \
+ "[creates hda,hda1-hda8]\n"
+#endif
+
+#if ENABLE_FEATURE_MAKEDEVS_TABLE
+#define makedevs_trivial_usage \
+ "[-d device_table] rootdir"
+#define makedevs_full_usage "\n\n" \
+ "Create a range of special files as specified in a device table.\n" \
+ "Device table entries take the form of:\n" \
+ "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
+ "Where name is the file name, type can be one of:\n" \
+ " f Regular file\n" \
+ " d Directory\n" \
+ " c Character device\n" \
+ " b Block device\n" \
+ " p Fifo (named pipe)\n" \
+ "uid is the user id for the target file, gid is the group id for the\n" \
+ "target file. The rest of the entries (major, minor, etc) apply to\n" \
+ "to device special files. A '-' may be used for blank entries."
+#define makedevs_example_usage \
+ "For example:\n" \
+ "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
+ "/dev d 755 0 0 - - - - -\n" \
+ "/dev/console c 666 0 0 5 1 - - -\n" \
+ "/dev/null c 666 0 0 1 3 0 0 -\n" \
+ "/dev/zero c 666 0 0 1 5 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 0 0 0 -\n" \
+ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
+ "Will Produce:\n" \
+ "/dev\n" \
+ "/dev/console\n" \
+ "/dev/null\n" \
+ "/dev/zero\n" \
+ "/dev/hda\n" \
+ "/dev/hda[0-15]\n"
+#endif
+
+#define makemime_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define makemime_full_usage "\n\n" \
+ "Create multipart MIME-encoded message from FILEs\n" \
+/* "Transfer encoding is base64, disposition is inline (not attachment)\n" */ \
+ "\nOptions:" \
+ "\n -o FILE Output. Default: stdout" \
+ "\n -a HDR Add header. Examples:" \
+ "\n \"From: user@host.org\", \"Date: `date -R`\"" \
+ "\n -c CT Content type. Default: text/plain" \
+ "\n -C CS Charset. Default: " CONFIG_FEATURE_MIME_CHARSET \
+/* "\n -e ENC Transfer encoding. Ignored. base64 is assumed" */ \
+ "\n" \
+ "\nOther options are silently ignored" \
+
+#define man_trivial_usage \
+ "[OPTIONS] [MANPAGE]..."
+#define man_full_usage "\n\n" \
+ "Format and display manual page\n" \
+ "\nOptions:" \
+ "\n -a Display all pages" \
+ "\n -w Show page locations" \
+
+#define matchpathcon_trivial_usage \
+ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
+#define matchpathcon_full_usage "\n\n" \
+ " -n Don't display path" \
+ "\n -N Don't use translations" \
+ "\n -f Use alternate file_context file" \
+ "\n -p Use prefix to speed translations" \
+ "\n -V Verify file context on disk matches defaults" \
+
+#define md5sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTIONS] -c [FILE]")
+#define md5sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define md5sum_example_usage \
+ "$ md5sum < busybox\n" \
+ "6fd11e98b98a58f64ff3398d7b324003\n" \
+ "$ md5sum busybox\n" \
+ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
+ "$ md5sum -c -\n" \
+ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \
+ "busybox: OK\n" \
+ "^D\n"
+
+#define sha1sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTIONS] -c [FILE]")
+#define sha1sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums" \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define sha256sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha256sum [OPTIONS] -c [FILE]")
+#define sha256sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA256 checksums" \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define sha512sum_trivial_usage \
+ "[OPTIONS] [FILE]..." \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha512sum [OPTIONS] -c [FILE]")
+#define sha512sum_full_usage "\n\n" \
+ "Print" IF_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA512 checksums" \
+ IF_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted checksum lines" \
+ )
+
+#define mdev_trivial_usage \
+ "[-s]"
+#define mdev_full_usage "\n\n" \
+ " -s Scan /sys and populate /dev during system boot\n" \
+ "\n" \
+ "It can be run by kernel as a hotplug helper. To activate it:\n" \
+ " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
+ IF_FEATURE_MDEV_CONF( \
+ "It uses /etc/mdev.conf with lines\n" \
+ "[-]DEVNAME UID:GID PERM" \
+ IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
+ IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
+ ) \
+
+#define mdev_notes_usage "" \
+ IF_FEATURE_MDEV_CONFIG( \
+ "The mdev config file contains lines that look like:\n" \
+ " hd[a-z][0-9]* 0:3 660\n\n" \
+ "That's device name (with regex match), uid:gid, and permissions.\n\n" \
+ IF_FEATURE_MDEV_EXEC( \
+ "Optionally, that can be followed (on the same line) by a special character\n" \
+ "and a command line to run after creating/before deleting the corresponding\n" \
+ "device(s). The environment variable $MDEV indicates the active device node\n" \
+ "(which is useful if it's a regex match). For example:\n\n" \
+ " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
+ "The special characters are @ (run after creating), $ (run before deleting),\n" \
+ "and * (run both after creating and before deleting). The commands run in\n" \
+ "the /dev directory, and use system() which calls /bin/sh.\n\n" \
+ ) \
+ "Config file parsing stops on the first matching line. If no config\n" \
+ "entry is matched, devices are created with default 0:0 660. (Make\n" \
+ "the last line match .* to override this.)\n\n" \
+ )
+
+#define mesg_trivial_usage \
+ "[y|n]"
+#define mesg_full_usage "\n\n" \
+ "Control write access to your terminal\n" \
+ " y Allow write access to your terminal\n" \
+ " n Disallow write access to your terminal"
+
+#define microcom_trivial_usage \
+ "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
+#define microcom_full_usage "\n\n" \
+ "Copy bytes for stdin to TTY and from TTY to stdout\n" \
+ "\nOptions:" \
+ "\n -d Wait up to DELAY ms for TTY output before sending every" \
+ "\n next byte to it" \
+ "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
+ "\n -s Set serial line to SPEED" \
+ "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
+
+#define mkdir_trivial_usage \
+ "[OPTIONS] DIRECTORY..."
+#define mkdir_full_usage "\n\n" \
+ "Create DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -m Mode" \
+ "\n -p No error if exists; make parent directories as needed" \
+ IF_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
+#define mkdir_example_usage \
+ "$ mkdir /tmp/foo\n" \
+ "$ mkdir /tmp/foo\n" \
+ "/tmp/foo: File exists\n" \
+ "$ mkdir /tmp/foo/bar/baz\n" \
+ "/tmp/foo/bar/baz: No such file or directory\n" \
+ "$ mkdir -p /tmp/foo/bar/baz\n"
+
+#define mkfifo_trivial_usage \
+ "[OPTIONS] name"
+#define mkfifo_full_usage "\n\n" \
+ "Create named pipe (identical to 'mknod name p')\n" \
+ "\nOptions:" \
+ "\n -m MODE Mode (default a=rw)" \
+ IF_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
+#define mkfs_ext2_trivial_usage \
+ "[-Fn] " \
+ /* "[-c|-l filename] " */ \
+ "[-b BLK_SIZE] " \
+ /* "[-f fragment-size] [-g blocks-per-group] " */ \
+ "[-i INODE_RATIO] [-I INODE_SIZE] " \
+ /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
+ "[-m RESERVED_PERCENT] " \
+ /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
+ /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
+ "[-L LABEL] " \
+ /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
+ "BLOCKDEV [KBYTES]"
+#define mkfs_ext2_full_usage "\n\n" \
+ " -b BLK_SIZE Block size, bytes" \
+/* "\n -c Check device for bad blocks" */ \
+/* "\n -E opts Set extended options" */ \
+/* "\n -f size Fragment size in bytes" */ \
+ "\n -F Force" \
+/* "\n -g N Number of blocks in a block group" */ \
+ "\n -i RATIO Max number of files is filesystem_size / RATIO" \
+ "\n -I BYTES Inode size (min 128)" \
+/* "\n -j Create a journal (ext3)" */ \
+/* "\n -J opts Set journal options (size/device)" */ \
+/* "\n -l file Read bad blocks list from file" */ \
+ "\n -L LBL Volume label" \
+ "\n -m PERCENT Percent of blocks to reserve for admin" \
+/* "\n -M dir Set last mounted directory" */ \
+ "\n -n Dry run" \
+/* "\n -N N Number of inodes to create" */ \
+/* "\n -o os Set the 'creator os' field" */ \
+/* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
+/* "\n -q Quiet" */ \
+/* "\n -r rev Set filesystem revision" */ \
+/* "\n -S Write superblock and group descriptors only" */ \
+/* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
+/* "\n -v Verbose" */ \
+
+#define mkfs_minix_trivial_usage \
+ "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
+#define mkfs_minix_full_usage "\n\n" \
+ "Make a MINIX filesystem\n" \
+ "\nOptions:" \
+ "\n -c Check device for bad blocks" \
+ "\n -n [14|30] Maximum length of filenames" \
+ "\n -i INODES Number of inodes for the filesystem" \
+ "\n -l FILE Read bad blocks list from FILE" \
+ "\n -v Make version 2 filesystem" \
+
+#define mkfs_reiser_trivial_usage \
+ "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
+
+#define mkfs_reiser_full_usage "\n\n" \
+ "Make a ReiserFS V3 filesystem\n" \
+ "\nOptions:" \
+ "\n -f Force" \
+ "\n -l LBL Volume label" \
+
+#define mkfs_vfat_trivial_usage \
+ "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
+/* Accepted but ignored:
+ "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
+ "[-m boot-msg-file] [-i volume-id] "
+ "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
+ "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
+*/
+#define mkfs_vfat_full_usage "\n\n" \
+ "Make a FAT32 filesystem\n" \
+ "\nOptions:" \
+/* "\n -c Check device for bad blocks" */ \
+ "\n -v Verbose" \
+/* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
+ "\n -n LBL Volume label" \
+
+#define mknod_trivial_usage \
+ "[OPTIONS] NAME TYPE MAJOR MINOR"
+#define mknod_full_usage "\n\n" \
+ "Create a special file (block, character, or pipe)\n" \
+ "\nOptions:" \
+ "\n -m Create the special file using the specified mode (default a=rw)" \
+ "\nTYPEs include:" \
+ "\n b: Make a block device" \
+ "\n c or u: Make a character device" \
+ "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
+ IF_SELINUX( \
+ "\n -Z Set security context" \
+ )
+
+#define mknod_example_usage \
+ "$ mknod /dev/fd0 b 2 0\n" \
+ "$ mknod -m 644 /tmp/pipe p\n"
+
+#define mkswap_trivial_usage \
+ "[OPTIONS] BLOCKDEV [KBYTES]"
+#define mkswap_full_usage "\n\n" \
+ "Prepare BLOCKDEV to be used as swap partition\n" \
+ "\nOptions:" \
+ "\n -L LBL Label" \
+
+#define mktemp_trivial_usage \
+ "[-dt] [-p DIR] [TEMPLATE]"
+#define mktemp_full_usage "\n\n" \
+ "Create a temporary file with name based on TEMPLATE and print its name.\n" \
+ "TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).\n" \
+ "\nOptions:" \
+ "\n -d Make a directory instead of a file" \
+/* "\n -q Fail silently if an error occurs" - we ignore it */ \
+ "\n -t Generate a path rooted in temporary directory" \
+ "\n -p DIR Use DIR as a temporary directory (implies -t)" \
+ "\n" \
+ "\nFor -t or -p, directory is chosen as follows:" \
+ "\n$TMPDIR if set, else -p DIR, else /tmp" \
+
+#define mktemp_example_usage \
+ "$ mktemp /tmp/temp.XXXXXX\n" \
+ "/tmp/temp.mWiLjM\n" \
+ "$ ls -la /tmp/temp.mWiLjM\n" \
+ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
+
+#define modprobe_trivial_usage \
+ IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value]...") \
+ IF_NOT_MODPROBE_SMALL("[-" \
+ IF_FEATURE_2_4_MODULES("k")"nqrsv" \
+ IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value]...")
+#define modprobe_full_usage "\n\n" \
+ "Options:" \
+ IF_MODPROBE_SMALL( \
+ "\n -q Quiet" \
+ "\n -f Force" \
+ "\n -w Wait for unload" \
+ "\n -r Remove module (stacks) or do autoclean" \
+ "\n -s Report via syslog instead of stderr" \
+ "\n -v Verbose" \
+ ) \
+ IF_NOT_MODPROBE_SMALL( \
+ IF_FEATURE_2_4_MODULES( \
+ "\n -k Make module autoclean-able" \
+ ) \
+ "\n -n Dry run" \
+ "\n -q Quiet" \
+ "\n -r Remove module (stacks) or do autoclean" \
+ "\n -s Report via syslog instead of stderr" \
+ "\n -v Verbose" \
+ IF_FEATURE_MODPROBE_BLACKLIST( \
+ "\n -b Apply blacklist to module names too" \
+ ) \
+ )
+
+#define modprobe_notes_usage \
+"modprobe can (un)load a stack of modules, passing each module options (when\n" \
+"loading). modprobe uses a configuration file to determine what option(s) to\n" \
+"pass each module it loads.\n" \
+"\n" \
+"The configuration file is searched (in this order):\n" \
+"\n" \
+" /etc/modprobe.conf (2.6 only)\n" \
+" /etc/modules.conf\n" \
+" /etc/conf.modules (deprecated)\n" \
+"\n" \
+"They all have the same syntax (see below). If none is present, it is\n" \
+"_not_ an error; each loaded module is then expected to load without\n" \
+"options. Once a file is found, the others are tested for.\n" \
+"\n" \
+"/etc/modules.conf entry format:\n" \
+"\n" \
+" alias <alias_name> <mod_name>\n" \
+" Makes it possible to modprobe alias_name, when there is no such module.\n" \
+" It makes sense if your mod_name is long, or you want a more representative\n" \
+" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
+" This makes it also possible to use a different set of options (below) for\n" \
+" the module and the alias.\n" \
+" A module can be aliased more than once.\n" \
+"\n" \
+" options <mod_name|alias_name> <symbol=value...>\n" \
+" When loading module mod_name (or the module aliased by alias_name), pass\n" \
+" the \"symbol=value\" pairs as option to that module.\n" \
+"\n" \
+"Sample /etc/modules.conf file:\n" \
+"\n" \
+" options tulip irq=3\n" \
+" alias tulip tulip2\n" \
+" options tulip2 irq=4 io=0x308\n" \
+"\n" \
+"Other functionality offered by 'classic' modprobe is not available in\n" \
+"this implementation.\n" \
+"\n" \
+"If module options are present both in the config file, and on the command line,\n" \
+"then the options from the command line will be passed to the module _after_\n" \
+"the options from the config file. That way, you can have defaults in the config\n" \
+"file, and override them for a specific usage from the command line.\n"
+#define modprobe_example_usage \
+ "(with the above /etc/modules.conf):\n\n" \
+ "$ modprobe tulip\n" \
+ " will load the module 'tulip' with default option 'irq=3'\n\n" \
+ "$ modprobe tulip irq=5\n" \
+ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
+ "$ modprobe tulip2\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
+ " which are the default for alias 'tulip2'\n\n" \
+ "$ modprobe tulip2 irq=8\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
+ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \
+ " from the command line\n\n" \
+ "$ modprobe tulip2 irq=2 io=0x210\n" \
+ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
+ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \
+ " from the command line\n"
+
+#define more_trivial_usage \
+ "[FILE]..."
+#define more_full_usage "\n\n" \
+ "View FILE (or stdin) one screenful at a time"
+
+#define more_example_usage \
+ "$ dmesg | more\n"
+
+#define mount_trivial_usage \
+ "[OPTIONS] [-o OPTS] DEVICE NODE"
+#define mount_full_usage "\n\n" \
+ "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
+ "\nOptions:" \
+ "\n -a Mount all filesystems in fstab" \
+ IF_FEATURE_MOUNT_FAKE( \
+ IF_FEATURE_MTAB_SUPPORT( \
+ "\n -f Update /etc/mtab, but don't mount" \
+ ) \
+ IF_NOT_FEATURE_MTAB_SUPPORT( \
+ "\n -f Dry run" \
+ ) \
+ ) \
+ IF_FEATURE_MOUNT_HELPERS( \
+ "\n -i Don't run mount helper" \
+ ) \
+ IF_FEATURE_MTAB_SUPPORT( \
+ "\n -n Don't update /etc/mtab" \
+ ) \
+ "\n -r Read-only mount" \
+ "\n -w Read-write mount (default)" \
+ "\n -t FSTYPE Filesystem type" \
+ "\n -O OPT Mount only filesystems with option OPT (-a only)" \
+ "\n-o OPT:" \
+ IF_FEATURE_MOUNT_LOOP( \
+ "\n loop Ignored (loop devices are autodetected)" \
+ ) \
+ IF_FEATURE_MOUNT_FLAGS( \
+ "\n [a]sync Writes are [a]synchronous" \
+ "\n [no]atime Disable/enable updates to inode access times" \
+ "\n [no]diratime Disable/enable atime updates to directories" \
+ "\n [no]relatime Disable/enable atime updates relative to modification time" \
+ "\n [no]dev (Dis)allow use of special device files" \
+ "\n [no]exec (Dis)allow use of executable files" \
+ "\n [no]suid (Dis)allow set-user-id-root programs" \
+ "\n [r]shared Convert [recursively] to a shared subtree" \
+ "\n [r]slave Convert [recursively] to a slave subtree" \
+ "\n [r]private Convert [recursively] to a private subtree" \
+ "\n [un]bindable Make mount point [un]able to be bind mounted" \
+ "\n bind Bind a file or directory to another location" \
+ "\n move Relocate an existing mount point" \
+ ) \
+ "\n remount Remount a mounted filesystem, changing flags" \
+ "\n ro/rw Same as -r/-w" \
+ "\n" \
+ "\nThere are filesystem-specific -o flags." \
+
+#define mount_example_usage \
+ "$ mount\n" \
+ "/dev/hda3 on / type minix (rw)\n" \
+ "proc on /proc type proc (rw)\n" \
+ "devpts on /dev/pts type devpts (rw)\n" \
+ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
+ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
+ "$ mount cd_image.iso mydir\n"
+#define mount_notes_usage \
+ "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
+
+#define mountpoint_trivial_usage \
+ "[-q] <[-dn] DIR | -x DEVICE>"
+#define mountpoint_full_usage "\n\n" \
+ "Check if the directory is a mountpoint\n" \
+ "\nOptions:" \
+ "\n -q Quiet" \
+ "\n -d Print major/minor device number of the filesystem" \
+ "\n -n Print device name of the filesystem" \
+ "\n -x Print major/minor device number of the blockdevice" \
+
+#define mountpoint_example_usage \
+ "$ mountpoint /proc\n" \
+ "/proc is not a mountpoint\n" \
+ "$ mountpoint /sys\n" \
+ "/sys is a mountpoint\n"
+
+#define mt_trivial_usage \
+ "[-f device] opcode value"
+#define mt_full_usage "\n\n" \
+ "Control magnetic tape drive operation\n" \
+ "\n" \
+ "Available Opcodes:\n" \
+ "\n" \
+ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
+ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
+ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
+ "setpart tell unload unlock weof wset" \
+
+#define mv_trivial_usage \
+ "[OPTIONS] SOURCE DEST\n" \
+ "or: mv [OPTIONS] SOURCE... DIRECTORY"
+#define mv_full_usage "\n\n" \
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -f Don't prompt before overwriting" \
+ "\n -i Interactive, prompt before overwrite" \
+
+#define mv_example_usage \
+ "$ mv /tmp/foo /bin/bar\n"
+
+#define nameif_trivial_usage \
+ "[-s] [-c FILE] [{IFNAME MACADDR}]"
+#define nameif_full_usage "\n\n" \
+ "Rename network interface while it in the down state\n" \
+ "\nOptions:" \
+ "\n -c FILE Use configuration file (default: /etc/mactab)" \
+ "\n -s Use syslog (LOCAL0 facility)" \
+ "\n IFNAME MACADDR new_interface_name interface_mac_address" \
+
+#define nameif_example_usage \
+ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+ " or\n" \
+ "$ nameif -c /etc/my_mactab_file\n" \
+
+#if !ENABLE_DESKTOP
+
+#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA
+#define NC_OPTIONS_STR "\n\nOptions:"
+#else
+#define NC_OPTIONS_STR
+#endif
+
+#define nc_trivial_usage \
+ IF_NC_EXTRA("[-iN] [-wN] ")IF_NC_SERVER("[-l] [-p PORT] ") \
+ "["IF_NC_EXTRA("-f FILENAME|")"IPADDR PORT]"IF_NC_EXTRA(" [-e PROG]")
+#define nc_full_usage "\n\n" \
+ "Open a pipe to IP:port" IF_NC_EXTRA(" or file") \
+ NC_OPTIONS_STR \
+ IF_NC_EXTRA( \
+ "\n -e PROG Run PROG after connect" \
+ "\n -i SEC Delay interval for lines sent" \
+ "\n -w SEC Timeout for connect" \
+ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
+ ) \
+ IF_NC_SERVER( \
+ "\n -l Listen mode, for inbound connects" \
+ IF_NC_EXTRA( \
+ "\n (use -l twice with -e for persistent server)") \
+ "\n -p PORT Local port" \
+ )
+
+#define nc_notes_usage "" \
+ IF_NC_EXTRA( \
+ "To use netcat as a terminal emulator on a serial port:\n\n" \
+ "$ stty 115200 -F /dev/ttyS0\n" \
+ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
+ )
+
+#define nc_example_usage \
+ "$ nc foobar.somedomain.com 25\n" \
+ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
+ "help\n" \
+ "214-Commands supported:\n" \
+ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \
+ "214 NOOP QUIT RSET HELP\n" \
+ "quit\n" \
+ "221 foobar closing connection\n"
+
+#else /* DESKTOP nc - much more compatible with nc 1.10 */
+
+#define nc_trivial_usage \
+ "[OPTIONS] HOST PORT - connect" \
+ IF_NC_SERVER("\n" \
+ "nc [OPTIONS] -l -p PORT [HOST] [PORT] - listen")
+#define nc_full_usage "\n\n" \
+ "Options:" \
+ "\n -e PROG Run PROG after connect (must be last)" \
+ IF_NC_SERVER( \
+ "\n -l Listen mode, for inbound connects" \
+ ) \
+ "\n -n Don't do DNS resolution" \
+ "\n -s ADDR Local address" \
+ "\n -p PORT Local port" \
+ "\n -u UDP mode" \
+ "\n -v Verbose" \
+ "\n -w SEC Timeout for connects and final net reads" \
+ IF_NC_EXTRA( \
+ "\n -i SEC Delay interval for lines sent" /* ", ports scanned" */ \
+ "\n -o FILE Hex dump traffic" \
+ "\n -z Zero-I/O mode (scanning)" \
+ ) \
+/* "\n -r Randomize local and remote ports" */
+/* "\n -g gateway Source-routing hop point[s], up to 8" */
+/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
+/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
+
+/* -e PROG can take ARGS too: "nc ... -e ls -l", but we don't document it
+ * in help text: nc 1.10 does not allow that. We don't want to entice
+ * users to use this incompatibility */
+
+#endif
+
+#define netstat_trivial_usage \
+ "[-laentuwxr"IF_FEATURE_NETSTAT_WIDE("W")IF_FEATURE_NETSTAT_PRG("p")"]"
+#define netstat_full_usage "\n\n" \
+ "Display networking information\n" \
+ "\nOptions:" \
+ "\n -l Display listening server sockets" \
+ "\n -a Display all sockets (default: connected)" \
+ "\n -e Display other/more information" \
+ "\n -n Don't resolve names" \
+ "\n -t Tcp sockets" \
+ "\n -u Udp sockets" \
+ "\n -w Raw sockets" \
+ "\n -x Unix sockets" \
+ "\n -r Display routing table" \
+ IF_FEATURE_NETSTAT_WIDE( \
+ "\n -W Display with no column truncation" \
+ ) \
+ IF_FEATURE_NETSTAT_PRG( \
+ "\n -p Display PID/Program name for sockets" \
+ )
+
+#define nice_trivial_usage \
+ "[-n ADJUST] [PROG ARGS]"
+#define nice_full_usage "\n\n" \
+ "Run PROG with modified scheduling priority\n" \
+ "\nOptions:" \
+ "\n -n ADJUST Adjust priority by ADJUST" \
+
+#define nmeter_trivial_usage \
+ "format_string"
+#define nmeter_full_usage "\n\n" \
+ "Monitor system in real time\n\n" \
+ "Format specifiers:\n" \
+ " %Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \
+ " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \
+ " %[niface] Monitor network interface 'iface'\n" \
+ " %m Monitor allocated memory\n" \
+ " %[mf] Monitor free memory\n" \
+ " %[mt] Monitor total memory\n" \
+ " %s Monitor allocated swap\n" \
+ " %f Monitor number of used file descriptors\n" \
+ " %Ni Monitor total/specific IRQ rate\n" \
+ " %x Monitor context switch rate\n" \
+ " %p Monitor forks\n" \
+ " %[pn] Monitor # of processes\n" \
+ " %b Monitor block io\n" \
+ " %Nt Show time (with N decimal points)\n" \
+ " %Nd Milliseconds between updates (default:1000)\n" \
+ " %r Print <cr> instead of <lf> at EOL" \
+
+#define nmeter_example_usage \
+ "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
+
+#define nohup_trivial_usage \
+ "PROG ARGS"
+#define nohup_full_usage "\n\n" \
+ "Run PROG immune to hangups, with output to a non-tty"
+#define nohup_example_usage \
+ "$ nohup make &"
+
+#define nslookup_trivial_usage \
+ "[HOST] [SERVER]"
+#define nslookup_full_usage "\n\n" \
+ "Query the nameserver for the IP address of the given HOST\n" \
+ "optionally using a specified DNS server"
+#define nslookup_example_usage \
+ "$ nslookup localhost\n" \
+ "Server: default\n" \
+ "Address: default\n" \
+ "\n" \
+ "Name: debian\n" \
+ "Address: 127.0.0.1\n"
+
+#define ntpd_trivial_usage \
+ "[-dnqwl] [-S PROG] [-p PEER]..."
+#define ntpd_full_usage "\n\n" \
+ "NTP client/server\n" \
+ "\nOptions:" \
+ "\n -d Verbose" \
+ "\n -n Do not daemonize" \
+ "\n -q Quit after clock is set" \
+/* -N exists for mostly compat reasons, thus not essential to inform */ \
+/* the user that it exists: user may use nice as well */ \
+/* "\n -N Run at high priority" */ \
+ "\n -w Do not set time (only query peers), implies -n" \
+ "\n -l Run as server on port 123" \
+ "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
+ "\n -p PEER Obtain time from PEER (may be repeated)" \
+
+#define od_trivial_usage \
+ "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]"
+#define od_full_usage "\n\n" \
+ "Write an unambiguous representation, octal bytes by default, of FILE\n" \
+ "(or stdin) to stdout"
+
+#define openvt_trivial_usage \
+ "[-c N] [-sw] [PROG ARGS]"
+#define openvt_full_usage "\n\n" \
+ "Start PROG on a new virtual terminal\n" \
+ "\nOptions:" \
+ "\n -c N Use specified VT" \
+ "\n -s Switch to the VT" \
+/* "\n -l Run PROG as login shell (by prepending '-')" */ \
+ "\n -w Wait for PROG to exit" \
+
+#define openvt_example_usage \
+ "openvt 2 /bin/ash\n"
+
+/*
+#define parse_trivial_usage \
+ "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
+#define parse_full_usage ""
+*/
+
+#define passwd_trivial_usage \
+ "[OPTIONS] [USER]"
+#define passwd_full_usage "\n\n" \
+ "Change USER's password. If no USER is specified,\n" \
+ "changes the password for the current user.\n" \
+ "\nOptions:" \
+ "\n -a Algorithm to use for password (des, md5)" /* ", sha1)" */ \
+ "\n -d Delete password for the account" \
+ "\n -l Lock (disable) account" \
+ "\n -u Unlock (re-enable) account" \
+
+#define chpasswd_trivial_usage \
+ IF_LONG_OPTS("[--md5|--encrypted]") IF_NOT_LONG_OPTS("[-m|-e]")
+#define chpasswd_full_usage "\n\n" \
+ "Read user:password from stdin and update /etc/passwd\n" \
+ "\nOptions:" \
+ IF_LONG_OPTS( \
+ "\n -e,--encrypted Supplied passwords are in encrypted form" \
+ "\n -m,--md5 Use MD5 encryption instead of DES" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -e Supplied passwords are in encrypted form" \
+ "\n -m Use MD5 encryption instead of DES" \
+ )
+
+#define patch_trivial_usage \
+ "[OPTIONS] [ORIGFILE [PATCHFILE]]"
+#define patch_full_usage "\n\n" \
+ IF_LONG_OPTS( \
+ " -p,--strip N Strip N leading components from file names" \
+ "\n -i,--input DIFF Read DIFF instead of stdin" \
+ "\n -R,--reverse Reverse patch" \
+ "\n -N,--forward Ignore already applied patches" \
+ "\n --dry-run Don't actually change files" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ " -p N Strip N leading components from file names" \
+ "\n -i DIFF Read DIFF instead of stdin" \
+ "\n -R Reverse patch" \
+ "\n -N Ignore already applied patches" \
+ )
+
+#define patch_example_usage \
+ "$ patch -p1 < example.diff\n" \
+ "$ patch -p0 -i example.diff"
+
+#define pgrep_trivial_usage \
+ "[-flnovx] [-s SID|-P PPID|PATTERN]"
+#define pgrep_full_usage "\n\n" \
+ "Display process(es) selected by regex PATTERN\n" \
+ "\nOptions:" \
+ "\n -l Show command name too" \
+ "\n -f Match against entire command line" \
+ "\n -n Show the newest process only" \
+ "\n -o Show the oldest process only" \
+ "\n -v Negate the match" \
+ "\n -x Match whole name (not substring)" \
+ "\n -s Match session ID (0 for current)" \
+ "\n -P Match parent process ID" \
+
+#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
+#define pidof_trivial_usage \
+ "[OPTIONS] [NAME]..."
+#define USAGE_PIDOF "\n\nOptions:"
+#else
+#define pidof_trivial_usage \
+ "[NAME]..."
+#define USAGE_PIDOF /* none */
+#endif
+#define pidof_full_usage "\n\n" \
+ "List PIDs of all processes with names that match NAMEs" \
+ USAGE_PIDOF \
+ IF_FEATURE_PIDOF_SINGLE( \
+ "\n -s Show only one PID") \
+ IF_FEATURE_PIDOF_OMIT( \
+ "\n -o PID Omit given pid" \
+ "\n Use %PPID to omit pid of pidof's parent") \
+
+#define pidof_example_usage \
+ "$ pidof init\n" \
+ "1\n" \
+ IF_FEATURE_PIDOF_OMIT( \
+ "$ pidof /bin/sh\n20351 5973 5950\n") \
+ IF_FEATURE_PIDOF_OMIT( \
+ "$ pidof /bin/sh -o %PPID\n20351 5950")
+
+#if !ENABLE_FEATURE_FANCY_PING
+#define ping_trivial_usage \
+ "host"
+#define ping_full_usage "\n\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
+#define ping6_trivial_usage \
+ "host"
+#define ping6_full_usage "\n\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts"
+#else
+#define ping_trivial_usage \
+ "[OPTIONS] HOST"
+#define ping_full_usage "\n\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts\n" \
+ "\nOptions:" \
+ "\n -4, -6 Force IP or IPv6 name resolution" \
+ "\n -c CNT Send only CNT pings" \
+ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
+ "\n -I IFACE/IP Use interface or IP address as source" \
+ "\n -W SEC Seconds to wait for the first response (default:10)" \
+ "\n (after all -c CNT packets are sent)" \
+ "\n -w SEC Seconds until ping exits (default:infinite)" \
+ "\n (can exit earlier with -c CNT)" \
+ "\n -q Quiet, only displays output at start" \
+ "\n and when finished" \
+
+#define ping6_trivial_usage \
+ "[OPTIONS] HOST"
+#define ping6_full_usage "\n\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts\n" \
+ "\nOptions:" \
+ "\n -c CNT Send only CNT pings" \
+ "\n -s SIZE Send SIZE data bytes in packets (default:56)" \
+ "\n -I IFACE/IP Use interface or IP address as source" \
+ "\n -q Quiet, only displays output at start" \
+ "\n and when finished" \
+
+#endif
+#define ping_example_usage \
+ "$ ping localhost\n" \
+ "PING slag (127.0.0.1): 56 data bytes\n" \
+ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
+ "\n" \
+ "--- debian ping statistics ---\n" \
+ "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+#define ping6_example_usage \
+ "$ ping6 ip6-localhost\n" \
+ "PING ip6-localhost (::1): 56 data bytes\n" \
+ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
+ "\n" \
+ "--- ip6-localhost ping statistics ---\n" \
+ "1 packets transmitted, 1 packets received, 0% packet loss\n" \
+ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n"
+
+#define pipe_progress_trivial_usage NOUSAGE_STR
+#define pipe_progress_full_usage ""
+
+#define pivot_root_trivial_usage \
+ "NEW_ROOT PUT_OLD"
+#define pivot_root_full_usage "\n\n" \
+ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
+ "the new root file system"
+
+#define pkill_trivial_usage \
+ "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
+#define pkill_full_usage "\n\n" \
+ "Send a signal to process(es) selected by regex PATTERN\n" \
+ "\nOptions:" \
+ "\n -l List all signals" \
+ "\n -f Match against entire command line" \
+ "\n -n Signal the newest process only" \
+ "\n -o Signal the oldest process only" \
+ "\n -v Negate the match" \
+ "\n -x Match whole name (not substring)" \
+ "\n -s Match session ID (0 for current)" \
+ "\n -P Match parent process ID" \
+
+#define popmaildir_trivial_usage \
+ "[OPTIONS] MAILDIR [CONN_HELPER ARGS]"
+#define popmaildir_full_usage "\n\n" \
+ "Fetch content of remote mailbox to local maildir\n" \
+ "\nOptions:" \
+/* "\n -b Binary mode. Ignored" */ \
+/* "\n -d Debug. Ignored" */ \
+/* "\n -m Show used memory. Ignored" */ \
+/* "\n -V Show version. Ignored" */ \
+/* "\n -c Use tcpclient. Ignored" */ \
+/* "\n -a Use APOP protocol. Implied. If server supports APOP -> use it" */ \
+ "\n -s Skip authorization" \
+ "\n -T Get messages with TOP instead of RETR" \
+ "\n -k Keep retrieved messages on the server" \
+ "\n -t SEC Network timeout" \
+ IF_FEATURE_POPMAILDIR_DELIVERY( \
+ "\n -F \"PROG ARGS\" Filter program (may be repeated)" \
+ "\n -M \"PROG ARGS\" Delivery program" \
+ ) \
+ "\n" \
+ "\nFetch from plain POP3 server:" \
+ "\npopmaildir -k DIR nc pop3.server.com 110 <user_and_pass.txt" \
+ "\nFetch from SSLed POP3 server and delete fetched emails:" \
+ "\npopmaildir DIR -- openssl s_client -quiet -connect pop3.server.com:995 <user_and_pass.txt"
+/* "\n -R BYTES Remove old messages on the server >= BYTES. Ignored" */
+/* "\n -Z N1-N2 Remove messages from N1 to N2 (dangerous). Ignored" */
+/* "\n -L BYTES Don't retrieve new messages >= BYTES. Ignored" */
+/* "\n -H LINES Type first LINES of a message. Ignored" */
+#define popmaildir_example_usage \
+ "$ popmaildir -k ~/Maildir -- nc pop.drvv.ru 110 [<password_file]\n" \
+ "$ popmaildir ~/Maildir -- openssl s_client -quiet -connect pop.gmail.com:995 [<password_file]\n"
+
+#define poweroff_trivial_usage \
+ "[-d DELAY] [-n] [-f]"
+#define poweroff_full_usage "\n\n" \
+ "Halt and shut off power\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for halting" \
+ "\n -n Do not sync" \
+ "\n -f Force power off (don't go through init)" \
+
+#define printenv_trivial_usage \
+ "[VARIABLE]..."
+#define printenv_full_usage "\n\n" \
+ "Print environment VARIABLEs.\n" \
+ "If no VARIABLE specified, print all."
+
+#define printf_trivial_usage \
+ "FORMAT [ARGUMENT]..."
+#define printf_full_usage "\n\n" \
+ "Format and print ARGUMENT(s) according to FORMAT,\n" \
+ "where FORMAT controls the output exactly as in C printf"
+#define printf_example_usage \
+ "$ printf \"Val=%d\\n\" 5\n" \
+ "Val=5\n"
+
+
+#if ENABLE_DESKTOP
+
+#define ps_trivial_usage \
+ "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
+#define ps_full_usage "\n\n" \
+ "Show list of processes\n" \
+ "\nOptions:" \
+ "\n -o COL1,COL2=HEADER Select columns for display" \
+ IF_FEATURE_SHOW_THREADS( \
+ "\n -T Show threads" \
+ )
+
+#else /* !ENABLE_DESKTOP */
+
+#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
+#define USAGE_PS "\nThis version of ps accepts no options"
+#else
+#define USAGE_PS "\nOptions:"
+#endif
+
+#define ps_trivial_usage \
+ ""
+#define ps_full_usage "\n\n" \
+ "Show list of processes\n" \
+ USAGE_PS \
+ IF_SELINUX( \
+ "\n -Z Show selinux context" \
+ ) \
+ IF_FEATURE_PS_WIDE( \
+ "\n w Wide output" \
+ )
+
+#endif /* ENABLE_DESKTOP */
+
+#define ps_example_usage \
+ "$ ps\n" \
+ " PID Uid Gid State Command\n" \
+ " 1 root root S init\n" \
+ " 2 root root S [kflushd]\n" \
+ " 3 root root S [kupdate]\n" \
+ " 4 root root S [kpiod]\n" \
+ " 5 root root S [kswapd]\n" \
+ " 742 andersen andersen S [bash]\n" \
+ " 743 andersen andersen S -bash\n" \
+ " 745 root root S [getty]\n" \
+ " 2990 andersen andersen R ps\n" \
+
+#define pscan_trivial_usage \
+ "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
+#define pscan_full_usage "\n\n" \
+ "Scan a host, print all open ports\n" \
+ "\nOptions:" \
+ "\n -c Show closed ports too" \
+ "\n -b Show blocked ports too" \
+ "\n -p Scan from this port (default 1)" \
+ "\n -P Scan up to this port (default 1024)" \
+ "\n -t Timeout (default 5000 ms)" \
+ "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
+
+#define pwd_trivial_usage \
+ ""
+#define pwd_full_usage "\n\n" \
+ "Print the full filename of the current working directory"
+#define pwd_example_usage \
+ "$ pwd\n" \
+ "/root\n"
+
+#define raidautorun_trivial_usage \
+ "DEVICE"
+#define raidautorun_full_usage "\n\n" \
+ "Tell the kernel to automatically search and start RAID arrays"
+#define raidautorun_example_usage \
+ "$ raidautorun /dev/md0"
+
+#define rdate_trivial_usage \
+ "[-sp] HOST"
+#define rdate_full_usage "\n\n" \
+ "Get and possibly set the system date and time from a remote HOST\n" \
+ "\nOptions:" \
+ "\n -s Set the system date and time (default)" \
+ "\n -p Print the date and time" \
+
+#define rdev_trivial_usage \
+ ""
+#define rdev_full_usage "\n\n" \
+ "Print the device node associated with the filesystem mounted at '/'"
+#define rdev_example_usage \
+ "$ rdev\n" \
+ "/dev/mtdblock9 /\n"
+
+#define readahead_trivial_usage \
+ "[FILE]..."
+#define readahead_full_usage "\n\n" \
+ "Preload FILEs to RAM"
+
+#define readlink_trivial_usage \
+ IF_FEATURE_READLINK_FOLLOW("[-fnv] ") "FILE"
+#define readlink_full_usage "\n\n" \
+ "Display the value of a symlink" \
+ IF_FEATURE_READLINK_FOLLOW( "\n" \
+ "\nOptions:" \
+ "\n -f Canonicalize by following all symlinks" \
+ "\n -n Don't add newline" \
+ "\n -v Verbose" \
+ ) \
+
+#define readprofile_trivial_usage \
+ "[OPTIONS]"
+#define readprofile_full_usage "\n\n" \
+ "Options:" \
+ "\n -m mapfile (Default: /boot/System.map)" \
+ "\n -p profile (Default: /proc/profile)" \
+ "\n -M NUM Set the profiling multiplier to NUM" \
+ "\n -i Print only info about the sampling step" \
+ "\n -v Verbose" \
+ "\n -a Print all symbols, even if count is 0" \
+ "\n -b Print individual histogram-bin counts" \
+ "\n -s Print individual counters within functions" \
+ "\n -r Reset all the counters (root only)" \
+ "\n -n Disable byte order auto-detection" \
+
+#define realpath_trivial_usage \
+ "FILE..."
+#define realpath_full_usage "\n\n" \
+ "Return the absolute pathnames of given FILE"
+
+#define reboot_trivial_usage \
+ "[-d DELAY] [-n] [-f]"
+#define reboot_full_usage "\n\n" \
+ "Reboot the system\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for rebooting" \
+ "\n -n No call to sync()" \
+ "\n -f Force reboot (don't go through init)" \
+
+#define reformime_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define reformime_full_usage "\n\n" \
+ "Parse MIME-encoded message\n" \
+ "\nOptions:" \
+ "\n -x PREFIX Extract content of MIME sections to files" \
+ "\n -X PROG ARGS Filter content of MIME sections through PROG" \
+ "\n Must be the last option" \
+ "\n" \
+ "\nOther options are silently ignored" \
+
+#define renice_trivial_usage \
+ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
+#define renice_full_usage "\n\n" \
+ "Change priority of running processes\n" \
+ "\nOptions:" \
+ "\n -n Adjust current nice value (smaller is faster)" \
+ "\n -p Process id(s) (default)" \
+ "\n -g Process group id(s)" \
+ "\n -u Process user name(s) and/or id(s)" \
+
+#define scriptreplay_trivial_usage \
+ "timingfile [typescript [divisor]]"
+#define scriptreplay_full_usage "\n\n" \
+ "Play back typescripts, using timing information"
+
+#define reset_trivial_usage \
+ ""
+#define reset_full_usage "\n\n" \
+ "Reset the screen"
+
+#define resize_trivial_usage \
+ ""
+#define resize_full_usage "\n\n" \
+ "Resize the screen"
+
+#define restorecon_trivial_usage \
+ "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
+#define restorecon_full_usage "\n\n" \
+ "Reset security contexts of files in pathname\n" \
+ "\n -i Ignore files that don't exist" \
+ "\n -f FILE File with list of files to process" \
+ "\n -e DIR Directory to exclude" \
+ "\n -R,-r Recurse" \
+ "\n -n Don't change any file labels" \
+ "\n -o FILE Save list of files with incorrect context" \
+ "\n -v Verbose" \
+ "\n -vv Show changed labels" \
+ "\n -F Force reset of context to match file_context" \
+ "\n for customizable files, or the user section," \
+ "\n if it has changed" \
+
+#define rfkill_trivial_usage \
+ "COMMAND [INDEX|TYPE]"
+#define rfkill_full_usage "\n\n" \
+ "Enable/disable wireless devices\n" \
+ "\nCommands:" \
+ "\n list [INDEX|TYPE] List current state" \
+ "\n block INDEX|TYPE Disable device" \
+ "\n unblock INDEX|TYPE Enable device" \
+ "\n" \
+ "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
+ "\n wimax, wwan, gps, fm" \
+
+#define rm_trivial_usage \
+ "[OPTIONS] FILE..."
+#define rm_full_usage "\n\n" \
+ "Remove (unlink) FILEs\n" \
+ "\nOptions:" \
+ "\n -i Always prompt before removing" \
+ "\n -f Never prompt" \
+ "\n -R,-r Recurse" \
+
+#define rm_example_usage \
+ "$ rm -rf /tmp/foo\n"
+
+#define rmdir_trivial_usage \
+ "[OPTIONS] DIRECTORY..."
+#define rmdir_full_usage "\n\n" \
+ "Remove DIRECTORY if it is empty\n" \
+ "\nOptions:" \
+ IF_FEATURE_RMDIR_LONG_OPTIONS( \
+ "\n -p|--parents Include parents" \
+ "\n --ignore-fail-on-non-empty" \
+ ) \
+ IF_NOT_FEATURE_RMDIR_LONG_OPTIONS( \
+ "\n -p Include parents" \
+ )
+
+#define rmdir_example_usage \
+ "# rmdir /tmp/foo\n"
+
+#define rmmod_trivial_usage \
+ "[OPTIONS] [MODULE]..."
+#define rmmod_full_usage "\n\n" \
+ "Unload the specified kernel modules from the kernel\n" \
+ "\nOptions:" \
+ "\n -w Wait until the module is no longer used" \
+ "\n -f Force unloading" \
+ "\n -a Remove all unused modules (recursively)" \
+
+#define rmmod_example_usage \
+ "$ rmmod tulip\n"
+
+#define route_trivial_usage \
+ "[{add|del|delete}]"
+#define route_full_usage "\n\n" \
+ "Edit kernel routing tables\n" \
+ "\nOptions:" \
+ "\n -n Don't resolve names" \
+ "\n -e Display other/more information" \
+ "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
+
+#define rpm_trivial_usage \
+ "-i PACKAGE.rpm; rpm -qp[ildc] PACKAGE.rpm"
+#define rpm_full_usage "\n\n" \
+ "Manipulate RPM packages\n" \
+ "\nCommands:" \
+ "\n -i Install package" \
+ "\n -qp Query package" \
+ "\nOptions:" \
+ "\n -i Show information" \
+ "\n -l List contents" \
+ "\n -d List documents" \
+ "\n -c List config files" \
+
+#define rpm2cpio_trivial_usage \
+ "package.rpm"
+#define rpm2cpio_full_usage "\n\n" \
+ "Output a cpio archive of the rpm file"
+
+#define rtcwake_trivial_usage \
+ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
+#define rtcwake_full_usage "\n\n" \
+ "Enter a system sleep state until specified wakeup time\n" \
+ IF_LONG_OPTS( \
+ "\n -a,--auto Read clock mode from adjtime" \
+ "\n -l,--local Clock is set to local time" \
+ "\n -u,--utc Clock is set to UTC time" \
+ "\n -d,--device=DEV Specify the RTC device" \
+ "\n -m,--mode=MODE Set the sleep state (default: standby)" \
+ "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
+ "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -a Read clock mode from adjtime" \
+ "\n -l Clock is set to local time" \
+ "\n -u Clock is set to UTC time" \
+ "\n -d DEV Specify the RTC device" \
+ "\n -m MODE Set the sleep state (default: standby)" \
+ "\n -s SEC Set the timeout in SEC seconds from now" \
+ "\n -t TIME Set the timeout to TIME seconds from epoch" \
+ )
+
+#define runcon_trivial_usage \
+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
+ "runcon CONTEXT PROG ARGS"
+#define runcon_full_usage "\n\n" \
+ "Run PROG in a different security context\n" \
+ "\n CONTEXT Complete security context\n" \
+ IF_FEATURE_RUNCON_LONG_OPTIONS( \
+ "\n -c,--compute Compute process transition context before modifying" \
+ "\n -t,--type=TYPE Type (for same role as parent)" \
+ "\n -u,--user=USER User identity" \
+ "\n -r,--role=ROLE Role" \
+ "\n -l,--range=RNG Levelrange" \
+ ) \
+ IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
+ "\n -c Compute process transition context before modifying" \
+ "\n -t TYPE Type (for same role as parent)" \
+ "\n -u USER User identity" \
+ "\n -r ROLE Role" \
+ "\n -l RNG Levelrange" \
+ )
+
+#define run_parts_trivial_usage \
+ "[-t] "IF_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY"
+#define run_parts_full_usage "\n\n" \
+ "Run a bunch of scripts in DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -t Print what would be run, but don't actually run anything" \
+ "\n -a ARG Pass ARG as argument for every program" \
+ "\n -u MASK Set the umask to MASK before running every program" \
+ IF_FEATURE_RUN_PARTS_FANCY( \
+ "\n -l Print names of all matching files even if they are not executable" \
+ )
+
+#define run_parts_example_usage \
+ "$ run-parts -a start /etc/init.d\n" \
+ "$ run-parts -a stop=now /etc/init.d\n\n" \
+ "Let's assume you have a script foo/dosomething:\n" \
+ "#!/bin/sh\n" \
+ "for i in $*; do eval $i; done; unset i\n" \
+ "case \"$1\" in\n" \
+ "start*) echo starting something;;\n" \
+ "stop*) set -x; shutdown -h $stop;;\n" \
+ "esac\n\n" \
+ "Running this yields:\n" \
+ "$run-parts -a stop=+4m foo/\n" \
+ "+ shutdown -h +4m"
+
+#define runlevel_trivial_usage \
+ "[FILE]"
+#define runlevel_full_usage "\n\n" \
+ "Find the current and previous system runlevel\n" \
+ "\n" \
+ "If no utmp FILE exists or if no runlevel record can be found,\n" \
+ "print \"unknown\""
+#define runlevel_example_usage \
+ "$ runlevel /var/run/utmp\n" \
+ "N 2"
+
+#define runsv_trivial_usage \
+ "DIR"
+#define runsv_full_usage "\n\n" \
+ "Start and monitor a service and optionally an appendant log service"
+
+#define runsvdir_trivial_usage \
+ "[-P] [-s SCRIPT] DIR"
+#define runsvdir_full_usage "\n\n" \
+ "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
+ "\n -P Put each runsv in a new session" \
+ "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
+
+#define rx_trivial_usage \
+ "FILE"
+#define rx_full_usage "\n\n" \
+ "Receive a file using the xmodem protocol"
+#define rx_example_usage \
+ "$ rx /tmp/foo\n"
+
+#define script_trivial_usage \
+ "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
+#define script_full_usage "\n\n" \
+ "Options:" \
+ "\n -a Append output" \
+ "\n -c PROG Run PROG, not shell" \
+ "\n -f Flush output after each write" \
+ "\n -q Quiet" \
+ IF_SCRIPTREPLAY( \
+ "\n -t Send timing to stderr" \
+ )
+
+#define sed_trivial_usage \
+ "[-efinr] SED_CMD [FILE]..."
+#define sed_full_usage "\n\n" \
+ "Options:" \
+ "\n -e CMD Add CMD to sed commands to be executed" \
+ "\n -f FILE Add FILE contents to sed commands to be executed" \
+ "\n -i Edit files in-place (else sends result to stdout)" \
+ "\n -n Suppress automatic printing of pattern space" \
+ "\n -r Use extended regex syntax" \
+ "\n" \
+ "\nIf no -e or -f, the first non-option argument is the sed command string." \
+ "\nRemaining arguments are input files (stdin if none)."
+
+#define sed_example_usage \
+ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
+ "bar\n"
+
+#define selinuxenabled_trivial_usage NOUSAGE_STR
+#define selinuxenabled_full_usage ""
+
+#define sendmail_trivial_usage \
+ "[OPTIONS] [RECIPIENT_EMAIL]..."
+#define sendmail_full_usage "\n\n" \
+ "Read email from stdin and send it\n" \
+ "\nStandard options:" \
+ "\n -t Read additional recipients from message body" \
+ "\n -f sender Sender (required)" \
+ "\n -o options Various options. -oi implied, others are ignored" \
+ "\n -i -oi synonym. implied and ignored" \
+ "\n" \
+ "\nBusybox specific options:" \
+ "\n -w seconds Network timeout" \
+ "\n -H 'PROG ARGS' Run connection helper" \
+ "\n Examples:" \
+ "\n -H 'exec openssl s_client -quiet -tls1 -starttls smtp" \
+ "\n -connect smtp.gmail.com:25' <email.txt" \
+ "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
+ "\n -H 'exec openssl s_client -quiet -tls1" \
+ "\n -connect smtp.gmail.com:465' <email.txt" \
+ "\n [4<username_and_passwd.txt | -au<username> -ap<password>]" \
+ "\n -S server[:port] Server" \
+ "\n -au<username> Username for AUTH LOGIN" \
+ "\n -ap<password> Password for AUTH LOGIN" \
+ "\n -am<method> Authentication method. Ignored. LOGIN is implied" \
+ "\n" \
+ "\nOther options are silently ignored; -oi -t is implied" \
+ IF_MAKEMIME( \
+ "\nUse makemime applet to create message with attachments" \
+ )
+
+#define seq_trivial_usage \
+ "[-w] [-s SEP] [FIRST [INC]] LAST"
+#define seq_full_usage "\n\n" \
+ "Print numbers from FIRST to LAST, in steps of INC.\n" \
+ "FIRST, INC default to 1.\n" \
+ "\nOptions:" \
+ "\n -w Pad to last with leading zeros" \
+ "\n -s SEP String separator" \
+
+#define sestatus_trivial_usage \
+ "[-vb]"
+#define sestatus_full_usage "\n\n" \
+ " -v Verbose" \
+ "\n -b Display current state of booleans" \
+
+#define setconsole_trivial_usage \
+ "[-r" IF_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
+#define setconsole_full_usage "\n\n" \
+ "Redirect system console output to DEVICE (default: /dev/tty)\n" \
+ "\nOptions:" \
+ "\n -r Reset output to /dev/console" \
+
+#define setenforce_trivial_usage \
+ "[Enforcing | Permissive | 1 | 0]"
+#define setenforce_full_usage ""
+
+#define setfiles_trivial_usage \
+ "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
+ IF_FEATURE_SETFILES_CHECK_OPTION( \
+ " [-c policyfile] spec_file" \
+ ) \
+ " pathname"
+#define setfiles_full_usage "\n\n" \
+ "Reset file contexts under pathname according to spec_file\n" \
+ IF_FEATURE_SETFILES_CHECK_OPTION( \
+ "\n -c FILE Check the validity of the contexts against the specified binary policy" \
+ ) \
+ "\n -d Show which specification matched each file" \
+ "\n -l Log changes in file labels to syslog" \
+ "\n -n Don't change any file labels" \
+ "\n -q Suppress warnings" \
+ "\n -r DIR Use an alternate root path" \
+ "\n -e DIR Exclude DIR" \
+ "\n -F Force reset of context to match file_context for customizable files" \
+ "\n -o FILE Save list of files with incorrect context" \
+ "\n -s Take a list of files from stdin (instead of command line)" \
+ "\n -v Show changes in file labels, if type or role are changing" \
+ "\n -vv Show changes in file labels, if type, role, or user are changing" \
+ "\n -W Display warnings about entries that had no matching files" \
+
+#define setfont_trivial_usage \
+ "FONT [-m MAPFILE] [-C TTY]"
+#define setfont_full_usage "\n\n" \
+ "Load a console font\n" \
+ "\nOptions:" \
+ "\n -m MAPFILE Load console screen map" \
+ "\n -C TTY Affect TTY instead of /dev/tty" \
+
+#define setfont_example_usage \
+ "$ setfont -m koi8-r /etc/i18n/fontname\n"
+
+#define setkeycodes_trivial_usage \
+ "SCANCODE KEYCODE..."
+#define setkeycodes_full_usage "\n\n" \
+ "Set entries into the kernel's scancode-to-keycode map,\n" \
+ "allowing unusual keyboards to generate usable keycodes.\n\n" \
+ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \
+ "and KEYCODE is given in decimal." \
+
+#define setkeycodes_example_usage \
+ "$ setkeycodes e030 127\n"
+
+#define setlogcons_trivial_usage \
+ "N"
+#define setlogcons_full_usage "\n\n" \
+ "Redirect the kernel output to console N (0 for current)"
+
+#define setsebool_trivial_usage \
+ "boolean value"
+
+#define setsebool_full_usage "\n\n" \
+ "Change boolean setting"
+
+#define setsid_trivial_usage \
+ "PROG ARGS"
+#define setsid_full_usage "\n\n" \
+ "Run PROG in a new session. PROG will have no controlling terminal\n" \
+ "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
+ "See setsid(2) for details." \
+
+#define last_trivial_usage \
+ ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
+#define last_full_usage "\n\n" \
+ "Show listing of the last users that logged into the system" \
+ IF_FEATURE_LAST_FANCY( "\n" \
+ "\nOptions:" \
+/* "\n -H Show header line" */ \
+ "\n -W Display with no host column truncation" \
+ "\n -f FILE Read from FILE instead of /var/log/wtmp" \
+ )
+
+#define showkey_trivial_usage \
+ "[-a | -k | -s]"
+#define showkey_full_usage "\n\n" \
+ "Show keys pressed\n" \
+ "\nOptions:" \
+ "\n -a Display decimal/octal/hex values of the keys" \
+ "\n -k Display interpreted keycodes (default)" \
+ "\n -s Display raw scan-codes" \
+
+#define slattach_trivial_usage \
+ "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
+#define slattach_full_usage "\n\n" \
+ "Attach network interface(s) to serial line(s)\n" \
+ "\nOptions:" \
+ "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
+ "\n -s SPD Set line speed" \
+ "\n -e Exit after initializing device" \
+ "\n -h Exit when the carrier is lost" \
+ "\n -c PROG Run PROG when the line is hung up" \
+ "\n -m Do NOT initialize the line in raw 8 bits mode" \
+ "\n -L Enable 3-wire operation" \
+ "\n -F Disable RTS/CTS flow control" \
+
+#define sleep_trivial_usage \
+ IF_FEATURE_FANCY_SLEEP("[") "N" IF_FEATURE_FANCY_SLEEP("]...")
+#define sleep_full_usage "\n\n" \
+ IF_NOT_FEATURE_FANCY_SLEEP("Pause for N seconds") \
+ IF_FEATURE_FANCY_SLEEP( \
+ "Pause for a time equal to the total of the args given, where each arg can\n" \
+ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays")
+#define sleep_example_usage \
+ "$ sleep 2\n" \
+ "[2 second delay results]\n" \
+ IF_FEATURE_FANCY_SLEEP( \
+ "$ sleep 1d 3h 22m 8s\n" \
+ "[98528 second delay results]\n")
+
+#define sort_trivial_usage \
+ "[-nru" \
+ IF_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
+ "] [FILE]..."
+#define sort_full_usage "\n\n" \
+ "Sort lines of text\n" \
+ "\nOptions:" \
+ IF_FEATURE_SORT_BIG( \
+ "\n -b Ignore leading blanks" \
+ "\n -c Check whether input is sorted" \
+ "\n -d Dictionary order (blank or alphanumeric only)" \
+ "\n -f Ignore case" \
+ "\n -g General numerical sort" \
+ "\n -i Ignore unprintable characters" \
+ "\n -k Sort key" \
+ "\n -M Sort month" \
+ ) \
+ "\n -n Sort numbers" \
+ IF_FEATURE_SORT_BIG( \
+ "\n -o Output to file" \
+ "\n -k Sort by key" \
+ "\n -t CHAR Key separator" \
+ ) \
+ "\n -r Reverse sort order" \
+ IF_FEATURE_SORT_BIG( \
+ "\n -s Stable (don't sort ties alphabetically)" \
+ ) \
+ "\n -u Suppress duplicate lines" \
+ IF_FEATURE_SORT_BIG( \
+ "\n -z Lines are terminated by NUL, not newline" \
+ "\n -mST Ignored for GNU compatibility") \
+
+#define sort_example_usage \
+ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
+ "a\n" \
+ "b\n" \
+ "c\n" \
+ "d\n" \
+ "e\n" \
+ "f\n" \
+ IF_FEATURE_SORT_BIG( \
+ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \
+ "d 2\n" \
+ "b 2\n" \
+ "c 3\n" \
+ ) \
+ ""
+
+#define split_trivial_usage \
+ "[OPTIONS] [INPUT [PREFIX]]"
+#define split_full_usage "\n\n" \
+ "Options:" \
+ "\n -b n[k|m] Split by bytes" \
+ "\n -l n Split by lines" \
+ "\n -a n Use n letters as suffix" \
+
+#define split_example_usage \
+ "$ split TODO foo\n" \
+ "$ cat TODO | split -a 2 -l 2 TODO_\n"
+
+#define start_stop_daemon_trivial_usage \
+ "[OPTIONS] [-S|-K] ... [-- ARGS...]"
+#define start_stop_daemon_full_usage "\n\n" \
+ "Search for matching processes, and then\n" \
+ "-K: stop all matching processes.\n" \
+ "-S: start a process unless a matching process is found.\n" \
+ IF_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
+ "\nProcess matching:" \
+ "\n -u,--user USERNAME|UID Match only this user's processes" \
+ "\n -n,--name NAME Match processes with NAME" \
+ "\n in comm field in /proc/PID/stat" \
+ "\n -x,--exec EXECUTABLE Match processes with this command" \
+ "\n in /proc/PID/cmdline" \
+ "\n -p,--pidfile FILE Match a process with PID from the file" \
+ "\n All specified conditions must match" \
+ "\n-S only:" \
+ "\n -x,--exec EXECUTABLE Program to run" \
+ "\n -a,--startas NAME Zeroth argument" \
+ "\n -b,--background Background" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -N,--nicelevel N Change nice level" \
+ ) \
+ "\n -c,--chuid USER[:[GRP]] Change to user/group" \
+ "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \
+ "\n-K only:" \
+ "\n -s,--signal SIG Signal to send" \
+ "\n -t,--test Match only, exit with 0 if a process is found" \
+ "\nOther:" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o,--oknodo Exit with status 0 if nothing is done" \
+ "\n -v,--verbose Verbose" \
+ ) \
+ "\n -q,--quiet Quiet" \
+ ) \
+ IF_NOT_FEATURE_START_STOP_DAEMON_LONG_OPTIONS( \
+ "\nProcess matching:" \
+ "\n -u USERNAME|UID Match only this user's processes" \
+ "\n -n NAME Match processes with NAME" \
+ "\n in comm field in /proc/PID/stat" \
+ "\n -x EXECUTABLE Match processes with this command" \
+ "\n command in /proc/PID/cmdline" \
+ "\n -p FILE Match a process with PID from the file" \
+ "\n All specified conditions must match" \
+ "\n-S only:" \
+ "\n -x EXECUTABLE Program to run" \
+ "\n -a NAME Zeroth argument" \
+ "\n -b Background" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -N N Change nice level" \
+ ) \
+ "\n -c USER[:[GRP]] Change to user/group" \
+ "\n -m Write PID to the pidfile specified by -p" \
+ "\n-K only:" \
+ "\n -s SIG Signal to send" \
+ "\n -t Match only, exit with 0 if a process is found" \
+ "\nOther:" \
+ IF_FEATURE_START_STOP_DAEMON_FANCY( \
+ "\n -o Exit with status 0 if nothing is done" \
+ "\n -v Verbose" \
+ ) \
+ "\n -q Quiet" \
+ ) \
+
+#define stat_trivial_usage \
+ "[OPTIONS] FILE..."
+#define stat_full_usage "\n\n" \
+ "Display file (default) or filesystem status\n" \
+ "\nOptions:" \
+ IF_FEATURE_STAT_FORMAT( \
+ "\n -c fmt Use the specified format" \
+ ) \
+ "\n -f Display filesystem status" \
+ "\n -L Follow links" \
+ "\n -t Display info in terse form" \
+ IF_SELINUX( \
+ "\n -Z Print security context" \
+ ) \
+ IF_FEATURE_STAT_FORMAT( \
+ "\n\nValid format sequences for files:\n" \
+ " %a Access rights in octal\n" \
+ " %A Access rights in human readable form\n" \
+ " %b Number of blocks allocated (see %B)\n" \
+ " %B The size in bytes of each block reported by %b\n" \
+ " %d Device number in decimal\n" \
+ " %D Device number in hex\n" \
+ " %f Raw mode in hex\n" \
+ " %F File type\n" \
+ " %g Group ID of owner\n" \
+ " %G Group name of owner\n" \
+ " %h Number of hard links\n" \
+ " %i Inode number\n" \
+ " %n File name\n" \
+ " %N File name, with -> TARGET if symlink\n" \
+ " %o I/O block size\n" \
+ " %s Total size, in bytes\n" \
+ " %t Major device type in hex\n" \
+ " %T Minor device type in hex\n" \
+ " %u User ID of owner\n" \
+ " %U User name of owner\n" \
+ " %x Time of last access\n" \
+ " %X Time of last access as seconds since Epoch\n" \
+ " %y Time of last modification\n" \
+ " %Y Time of last modification as seconds since Epoch\n" \
+ " %z Time of last change\n" \
+ " %Z Time of last change as seconds since Epoch\n" \
+ "\nValid format sequences for file systems:\n" \
+ " %a Free blocks available to non-superuser\n" \
+ " %b Total data blocks in file system\n" \
+ " %c Total file nodes in file system\n" \
+ " %d Free file nodes in file system\n" \
+ " %f Free blocks in file system\n" \
+ IF_SELINUX( \
+ " %C Security context in selinux\n" \
+ ) \
+ " %i File System ID in hex\n" \
+ " %l Maximum length of filenames\n" \
+ " %n File name\n" \
+ " %s Block size (for faster transfer)\n" \
+ " %S Fundamental block size (for block counts)\n" \
+ " %t Type in hex\n" \
+ " %T Type in human readable form" \
+ ) \
+
+#define strings_trivial_usage \
+ "[-afo] [-n LEN] [FILE]..."
+#define strings_full_usage "\n\n" \
+ "Display printable strings in a binary file\n" \
+ "\nOptions:" \
+ "\n -a Scan whole file (default)" \
+ "\n -f Precede strings with filenames" \
+ "\n -n LEN At least LEN characters form a string (default 4)" \
+ "\n -o Precede strings with decimal offsets" \
+
+#define stty_trivial_usage \
+ "[-a|g] [-F DEVICE] [SETTING]..."
+#define stty_full_usage "\n\n" \
+ "Without arguments, prints baud rate, line discipline,\n" \
+ "and deviations from stty sane\n" \
+ "\nOptions:" \
+ "\n -F DEVICE Open device instead of stdin" \
+ "\n -a Print all current settings in human-readable form" \
+ "\n -g Print in stty-readable form" \
+ "\n [SETTING] See manpage" \
+
+#define su_trivial_usage \
+ "[OPTIONS] [-] [USERNAME]"
+#define su_full_usage "\n\n" \
+ "Change user id or become root\n" \
+ "\nOptions:" \
+ "\n -p,-m Preserve environment" \
+ "\n -c CMD Command to pass to 'sh -c'" \
+ "\n -s SH Shell to use instead of default shell" \
+
+#define sulogin_trivial_usage \
+ "[-t N] [TTY]"
+#define sulogin_full_usage "\n\n" \
+ "Single user login\n" \
+ "\nOptions:" \
+ "\n -t N Timeout" \
+
+#define sum_trivial_usage \
+ "[-rs] [FILE]..."
+#define sum_full_usage "\n\n" \
+ "Checksum and count the blocks in a file\n" \
+ "\nOptions:" \
+ "\n -r Use BSD sum algorithm (1K blocks)" \
+ "\n -s Use System V sum algorithm (512byte blocks)" \
+
+#define sv_trivial_usage \
+ "[-v] [-w SEC] CMD SERVICE_DIR..."
+#define sv_full_usage "\n\n" \
+ "Control services monitored by runsv supervisor.\n" \
+ "Commands (only first character is enough):\n" \
+ "\n" \
+ "status: query service status\n" \
+ "up: if service isn't running, start it. If service stops, restart it\n" \
+ "once: like 'up', but if service stops, don't restart it\n" \
+ "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
+ " if it exists. After it stops, don't restart service\n" \
+ "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
+ " runsv exits too\n" \
+ "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
+ "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
+
+#define svlogd_trivial_usage \
+ "[-ttv] [-r C] [-R CHARS] [-l MATCHLEN] [-b BUFLEN] DIR..."
+#define svlogd_full_usage "\n\n" \
+ "Continuously read log data from stdin, optionally\n" \
+ "filter log messages, and write the data to one or more automatically\n" \
+ "rotated logs" \
+
+#define swapoff_trivial_usage \
+ "[-a] [DEVICE]"
+#define swapoff_full_usage "\n\n" \
+ "Stop swapping on DEVICE\n" \
+ "\nOptions:" \
+ "\n -a Stop swapping on all swap devices" \
+
+#define swapon_trivial_usage \
+ "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
+#define swapon_full_usage "\n\n" \
+ "Start swapping on DEVICE\n" \
+ "\nOptions:" \
+ "\n -a Start swapping on all swap devices" \
+ IF_FEATURE_SWAPON_PRI( \
+ "\n -p PRI Set swap device priority" \
+ ) \
+
+#define switch_root_trivial_usage \
+ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
+#define switch_root_full_usage "\n\n" \
+ "Free initramfs and switch to another root fs:\n" \
+ "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
+ "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
+ "\nOptions:" \
+ "\n -c DEV Reopen stdio to DEV after switch" \
+
+#define sync_trivial_usage \
+ ""
+#define sync_full_usage "\n\n" \
+ "Write all buffered blocks to disk"
+
+#define fsync_trivial_usage \
+ "[OPTIONS] FILE..."
+#define fsync_full_usage "\n\n" \
+ "Write files' buffered blocks to disk\n" \
+ "\nOptions:" \
+ "\n -d Avoid syncing metadata"
+
+#define sysctl_trivial_usage \
+ "[OPTIONS] [VALUE]..."
+#define sysctl_full_usage "\n\n" \
+ "Configure kernel parameters at runtime\n" \
+ "\nOptions:" \
+ "\n -n Don't print key names" \
+ "\n -e Don't warn about unknown keys" \
+ "\n -w Change sysctl setting" \
+ "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
+ "\n -a Display all values" \
+ "\n -A Display all values in table form" \
+
+#define sysctl_example_usage \
+ "sysctl [-n] [-e] variable...\n" \
+ "sysctl [-n] [-e] -w variable=value...\n" \
+ "sysctl [-n] [-e] -a\n" \
+ "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
+ "sysctl [-n] [-e] -A\n"
+
+#define syslogd_trivial_usage \
+ "[OPTIONS]"
+#define syslogd_full_usage "\n\n" \
+ "System logging utility.\n" \
+ "This version of syslogd ignores /etc/syslog.conf\n" \
+ "\nOptions:" \
+ "\n -n Run in foreground" \
+ "\n -O FILE Log to given file (default:/var/log/messages)" \
+ "\n -l N Set local log level" \
+ "\n -S Smaller logging output" \
+ IF_FEATURE_ROTATE_LOGFILE( \
+ "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
+ "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
+ IF_FEATURE_REMOTE_LOG( \
+ "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
+ "\n -L Log locally and via network (default is network only if -R)") \
+ IF_FEATURE_SYSLOGD_DUP( \
+ "\n -D Drop duplicates") \
+ IF_FEATURE_IPC_SYSLOG( \
+ "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
+ /* NB: -Csize shouldn't have space (because size is optional) */
+/* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
+
+#define syslogd_example_usage \
+ "$ syslogd -R masterlog:514\n" \
+ "$ syslogd -R 192.168.1.1:601\n"
+
+#define tac_trivial_usage \
+ "[FILE]..."
+#define tac_full_usage "\n\n" \
+ "Concatenate FILEs and print them in reverse"
+
+#define tar_trivial_usage \
+ "-[" IF_FEATURE_TAR_CREATE("c") "xt" IF_FEATURE_SEAMLESS_GZ("z") \
+ IF_FEATURE_SEAMLESS_BZ2("j") IF_FEATURE_SEAMLESS_LZMA("a") \
+ IF_FEATURE_SEAMLESS_Z("Z") IF_FEATURE_TAR_NOPRESERVE_TIME("m") "vO] " \
+ IF_FEATURE_TAR_FROM("[-X FILE] ") \
+ "[-f TARFILE] [-C DIR] [FILE]..."
+#define tar_full_usage "\n\n" \
+ IF_FEATURE_TAR_CREATE("Create, extract, ") \
+ IF_NOT_FEATURE_TAR_CREATE("Extract ") \
+ "or list files from a tar file\n" \
+ "\nOptions:" \
+ IF_FEATURE_TAR_CREATE( \
+ "\n c Create" \
+ ) \
+ "\n x Extract" \
+ "\n t List" \
+ "\nArchive format selection:" \
+ IF_FEATURE_SEAMLESS_GZ( \
+ "\n z Filter the archive through gzip" \
+ ) \
+ IF_FEATURE_SEAMLESS_BZ2( \
+ "\n j Filter the archive through bzip2" \
+ ) \
+ IF_FEATURE_SEAMLESS_LZMA( \
+ "\n a Filter the archive through lzma" \
+ ) \
+ IF_FEATURE_SEAMLESS_Z( \
+ "\n Z Filter the archive through compress" \
+ ) \
+ IF_FEATURE_TAR_NOPRESERVE_TIME( \
+ "\n m Do not restore mtime" \
+ ) \
+ "\nFile selection:" \
+ "\n f Name of TARFILE or \"-\" for stdin" \
+ "\n O Extract to stdout" \
+ IF_FEATURE_TAR_FROM( \
+ IF_FEATURE_TAR_LONG_OPTIONS( \
+ "\n exclude File to exclude" \
+ ) \
+ "\n X File with names to exclude" \
+ ) \
+ "\n C Change to DIR before operation" \
+ "\n v Verbose" \
+
+#define tar_example_usage \
+ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
+ "$ tar -cf /tmp/tarball.tar /usr/local\n"
+
+#define taskset_trivial_usage \
+ "[-p] [MASK] [PID | PROG ARGS]"
+#define taskset_full_usage "\n\n" \
+ "Set or get CPU affinity\n" \
+ "\nOptions:" \
+ "\n -p Operate on an existing PID" \
+
+#define taskset_example_usage \
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n" \
+ "pid 1's current affinity mask: 3\n"
+
+#define tee_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define tee_full_usage "\n\n" \
+ "Copy stdin to each FILE, and also to stdout\n" \
+ "\nOptions:" \
+ "\n -a Append to the given FILEs, don't overwrite" \
+ "\n -i Ignore interrupt signals (SIGINT)" \
+
+#define tee_example_usage \
+ "$ echo \"Hello\" | tee /tmp/foo\n" \
+ "$ cat /tmp/foo\n" \
+ "Hello\n"
+
+#if ENABLE_FEATURE_TELNET_AUTOLOGIN
+#define telnet_trivial_usage \
+ "[-a] [-l USER] HOST [PORT]"
+#define telnet_full_usage "\n\n" \
+ "Connect to telnet server\n" \
+ "\nOptions:" \
+ "\n -a Automatic login with $USER variable" \
+ "\n -l USER Automatic login as USER" \
+
+#else
+#define telnet_trivial_usage \
+ "HOST [PORT]"
+#define telnet_full_usage "\n\n" \
+ "Connect to telnet server"
+#endif
+
+#define telnetd_trivial_usage \
+ "[OPTIONS]"
+#define telnetd_full_usage "\n\n" \
+ "Handle incoming telnet connections" \
+ IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
+ "\nOptions:" \
+ "\n -l LOGIN Exec LOGIN on connect" \
+ "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
+ "\n -K Close connection as soon as login exits" \
+ "\n (normally wait until all programs close slave pty)" \
+ IF_FEATURE_TELNETD_STANDALONE( \
+ "\n -p PORT Port to listen on" \
+ "\n -b ADDR[:PORT] Address to bind to" \
+ "\n -F Run in foreground" \
+ "\n -i Inetd mode" \
+ IF_FEATURE_TELNETD_INETD_WAIT( \
+ "\n -w SEC Inetd 'wait' mode, linger time SEC" \
+ "\n -S Log to syslog (implied by -i or without -F and -w)" \
+ ) \
+ )
+
+/* "test --help" does not print help (POSIX compat), only "[ --help" does.
+ * We display "<applet> EXPRESSION ]" here (not "<applet> EXPRESSION")
+ * Unfortunately, it screws up generated BusyBox.html. TODO. */
+#define test_trivial_usage \
+ "EXPRESSION ]"
+#define test_full_usage "\n\n" \
+ "Check file types, compare values etc. Return a 0/1 exit code\n" \
+ "depending on logical value of EXPRESSION"
+#define test_example_usage \
+ "$ test 1 -eq 2\n" \
+ "$ echo $?\n" \
+ "1\n" \
+ "$ test 1 -eq 1\n" \
+ "$ echo $?\n" \
+ "0\n" \
+ "$ [ -d /etc ]\n" \
+ "$ echo $?\n" \
+ "0\n" \
+ "$ [ -d /junk ]\n" \
+ "$ echo $?\n" \
+ "1\n"
+
+#define tc_trivial_usage \
+ /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
+#define tc_full_usage "\n\n" \
+ "OBJECT: {qdisc|class|filter}\n" \
+ "CMD: {add|del|change|replace|show}\n" \
+ "\n" \
+ "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
+ /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
+ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
+ " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
+ "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
+ "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
+ " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
+ "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
+ "filter [ pref PRIO ] [ protocol PROTO ]\n" \
+ /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
+ " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
+ " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
+ "filter show [ dev STRING ] [ root | parent CLASSID ]"
+
+#define tcpsvd_trivial_usage \
+ "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
+/* with not-implemented options: */
+/* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
+#define tcpsvd_full_usage "\n\n" \
+ "Create TCP socket, bind to IP:PORT and listen\n" \
+ "for incoming connection. Run PROG for each connection.\n" \
+ "\n IP IP to listen on. '0' = all" \
+ "\n PORT Port to listen on" \
+ "\n PROG ARGS Program to run" \
+ "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
+ "\n -u USER[:GRP] Change to user/group after bind" \
+ "\n -c N Handle up to N connections simultaneously" \
+ "\n -b N Allow a backlog of approximately N TCP SYNs" \
+ "\n -C N[:MSG] Allow only up to N connections from the same IP" \
+ "\n New connections from this IP address are closed" \
+ "\n immediately. MSG is written to the peer before close" \
+ "\n -h Look up peer's hostname" \
+ "\n -E Don't set up environment variables" \
+ "\n -v Verbose" \
+
+#define udpsvd_trivial_usage \
+ "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
+#define udpsvd_full_usage "\n\n" \
+ "Create UDP socket, bind to IP:PORT and wait\n" \
+ "for incoming packets. Run PROG for each packet,\n" \
+ "redirecting all further packets with same peer ip:port to it.\n" \
+ "\n IP IP to listen on. '0' = all" \
+ "\n PORT Port to listen on" \
+ "\n PROG ARGS Program to run" \
+ "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
+ "\n -u USER[:GRP] Change to user/group after bind" \
+ "\n -c N Handle up to N connections simultaneously" \
+ "\n -h Look up peer's hostname" \
+ "\n -E Don't set up environment variables" \
+ "\n -v Verbose" \
+
+#define tftp_trivial_usage \
+ "[OPTIONS] HOST [PORT]"
+#define tftp_full_usage "\n\n" \
+ "Transfer a file from/to tftp server\n" \
+ "\nOptions:" \
+ "\n -l FILE Local FILE" \
+ "\n -r FILE Remote FILE" \
+ IF_FEATURE_TFTP_GET( \
+ "\n -g Get file" \
+ ) \
+ IF_FEATURE_TFTP_PUT( \
+ "\n -p Put file" \
+ ) \
+ IF_FEATURE_TFTP_BLOCKSIZE( \
+ "\n -b SIZE Transfer blocks of SIZE octets" \
+ )
+
+#define tftpd_trivial_usage \
+ "[-cr] [-u USER] [DIR]"
+#define tftpd_full_usage "\n\n" \
+ "Transfer a file on tftp client's request\n" \
+ "\n" \
+ "tftpd should be used as an inetd service.\n" \
+ "tftpd's line for inetd.conf:\n" \
+ " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
+ "It also can be ran from udpsvd:\n" \
+ " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
+ "\nOptions:" \
+ "\n -r Prohibit upload" \
+ "\n -c Allow file creation via upload" \
+ "\n -u Access files as USER" \
+
+#define time_trivial_usage \
+ "[OPTIONS] PROG ARGS"
+#define time_full_usage "\n\n" \
+ "Run PROG, display resource usage when it exits\n" \
+ "\nOptions:" \
+ "\n -v Verbose" \
+
+#define timeout_trivial_usage \
+ "[-t SECS] [-s SIG] PROG ARGS"
+#define timeout_full_usage "\n\n" \
+ "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
+ "Defaults: SECS: 10, SIG: TERM." \
+
+#define top_trivial_usage \
+ "[-b] [-nCOUNT] [-dSECONDS]" IF_FEATURE_TOPMEM(" [-m]")
+#define top_full_usage "\n\n" \
+ "Provide a view of process activity in real time.\n" \
+ "Read the status of all processes from /proc each SECONDS\n" \
+ "and display a screenful of them." \
+//TODO: add options and keyboard commands
+
+#define touch_trivial_usage \
+ "[-c] [-d DATE] FILE [FILE]..."
+#define touch_full_usage "\n\n" \
+ "Update the last-modified date on the given FILE[s]\n" \
+ "\nOptions:" \
+ "\n -c Don't create files" \
+ "\n -d DT Date/time to use" \
+
+#define touch_example_usage \
+ "$ ls -l /tmp/foo\n" \
+ "/bin/ls: /tmp/foo: No such file or directory\n" \
+ "$ touch /tmp/foo\n" \
+ "$ ls -l /tmp/foo\n" \
+ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n"
+
+#define tr_trivial_usage \
+ "[-cds] STRING1 [STRING2]"
+#define tr_full_usage "\n\n" \
+ "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \
+ "\nOptions:" \
+ "\n -c Take complement of STRING1" \
+ "\n -d Delete input characters coded STRING1" \
+ "\n -s Squeeze multiple output characters of STRING2 into one character" \
+
+#define tr_example_usage \
+ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
+ "hello world\n"
+
+#define traceroute_trivial_usage \
+ "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
+ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
+ " [-z PAUSE_MSEC] HOST [BYTES]"
+#define traceroute_full_usage "\n\n" \
+ "Trace the route to HOST\n" \
+ "\nOptions:" \
+ IF_TRACEROUTE6( \
+ "\n -4, -6 Force IP or IPv6 name resolution" \
+ ) \
+ "\n -F Set the don't fragment bit" \
+ "\n -I Use ICMP ECHO instead of UDP datagrams" \
+ "\n -l Display the TTL value of the returned packet" \
+ "\n -d Set SO_DEBUG options to socket" \
+ "\n -n Print numeric addresses" \
+ "\n -r Bypass routing tables, send directly to HOST" \
+ "\n -v Verbose" \
+ "\n -m Max time-to-live (max number of hops)" \
+ "\n -p Base UDP port number used in probes" \
+ "\n (default 33434)" \
+ "\n -q Number of probes per TTL (default 3)" \
+ "\n -s IP address to use as the source address" \
+ "\n -t Type-of-service in probe packets (default 0)" \
+ "\n -w Time in seconds to wait for a response (default 3)" \
+ "\n -g Loose source route gateway (8 max)" \
+
+#define traceroute6_trivial_usage \
+ "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
+ " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
+ " HOST [BYTES]"
+#define traceroute6_full_usage "\n\n" \
+ "Trace the route to HOST\n" \
+ "\nOptions:" \
+ "\n -d Set SO_DEBUG options to socket" \
+ "\n -n Print numeric addresses" \
+ "\n -r Bypass routing tables, send directly to HOST" \
+ "\n -v Verbose" \
+ "\n -m Max time-to-live (max number of hops)" \
+ "\n -p Base UDP port number used in probes" \
+ "\n (default is 33434)" \
+ "\n -q Number of probes per TTL (default 3)" \
+ "\n -s IP address to use as the source address" \
+ "\n -t Type-of-service in probe packets (default 0)" \
+ "\n -w Time in seconds to wait for a response (default 3)" \
+
+#define true_trivial_usage \
+ ""
+#define true_full_usage "\n\n" \
+ "Return an exit code of TRUE (0)"
+#define true_example_usage \
+ "$ true\n" \
+ "$ echo $?\n" \
+ "0\n"
+
+#define tty_trivial_usage \
+ ""
+#define tty_full_usage "\n\n" \
+ "Print file name of stdin's terminal" \
+ IF_INCLUDE_SUSv2( "\n" \
+ "\nOptions:" \
+ "\n -s Print nothing, only return exit status" \
+ )
+#define tty_example_usage \
+ "$ tty\n" \
+ "/dev/tty2\n"
+
+#define ttysize_trivial_usage \
+ "[w] [h]"
+#define ttysize_full_usage "\n\n" \
+ "Print dimension(s) of stdin's terminal, on error return 80x25"
+
+#define tunctl_trivial_usage \
+ "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
+#define tunctl_full_usage "\n\n" \
+ "Create or delete tun interfaces\n" \
+ "\nOptions:" \
+ "\n -f name tun device (/dev/net/tun)" \
+ "\n -t name Create iface 'name'" \
+ "\n -d name Delete iface 'name'" \
+ IF_FEATURE_TUNCTL_UG( \
+ "\n -u owner Set iface owner" \
+ "\n -g group Set iface group" \
+ "\n -b Brief output" \
+ )
+#define tunctl_example_usage \
+ "# tunctl\n" \
+ "# tunctl -d tun0\n"
+
+#define tune2fs_trivial_usage \
+/* "[-c max-mounts-count] [-e errors-behavior] [-g group] " */ \
+/* "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " */ \
+/* "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " */ \
+/* "[-r reserved-blocks-count] [-u user] [-C mount-count] " */ \
+ "[-L LABEL] " \
+/* "[-M last-mounted-dir] [-O [^]feature[,...]] " */ \
+/* "[-T last-check-time] [-U UUID] " */ \
+ "BLOCKDEV"
+#define tune2fs_full_usage "\n\n" \
+ "Adjust filesystem options on ext[23] filesystems"
+
+#define udhcpc_trivial_usage \
+ "[-fbnqvoCR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]\n" \
+ " [-H HOSTNAME] [-c CID] [-V VENDOR] [-O DHCP_OPT]..." IF_FEATURE_UDHCP_PORT(" [-P N]")
+#define udhcpc_full_usage "\n" \
+ IF_LONG_OPTS( \
+ "\n -i,--interface IFACE Interface to use (default eth0)" \
+ "\n -p,--pidfile FILE Create pidfile" \
+ "\n -r,--request IP IP address to request" \
+ "\n -s,--script PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t,--retries N Send up to N discover packets" \
+ "\n -T,--timeout N Pause between packets (default 3 seconds)" \
+ "\n -A,--tryagain N Wait N seconds after failure (default 20)" \
+ "\n -f,--foreground Run in foreground" \
+ USE_FOR_MMU( \
+ "\n -b,--background Background if lease is not obtained" \
+ ) \
+ "\n -S,--syslog Log to syslog too" \
+ "\n -n,--now Exit if lease is not obtained" \
+ "\n -q,--quit Exit after obtaining lease" \
+ "\n -R,--release Release IP on exit" \
+ IF_FEATURE_UDHCP_PORT( \
+ "\n -P,--client-port N Use port N (default 68)" \
+ ) \
+ IF_FEATURE_UDHCPC_ARPING( \
+ "\n -a,--arping Use arping to validate offered address" \
+ ) \
+ "\n -O,--request-option OPT Request DHCP option OPT (cumulative)" \
+ "\n -o,--no-default-options Don't request any options (unless -O is given)" \
+ "\n -x OPT:VAL Include option OPT in sent packets (cumulative)" \
+ "\n -F,--fqdn NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h,--hostname NAME Send NAME as client hostname (default none)" \
+ "\n -V,--vendorclass VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c,--clientid CLIENTID Client identifier (default own MAC)" \
+ "\n -C,--clientid-none Don't send client identifier" \
+ ) \
+ IF_NOT_LONG_OPTS( \
+ "\n -i IFACE Interface to use (default eth0)" \
+ "\n -p FILE Create pidfile" \
+ "\n -r IP IP address to request" \
+ "\n -s PROG Run PROG at DHCP events (default "CONFIG_UDHCPC_DEFAULT_SCRIPT")" \
+ "\n -t N Send up to N discover packets" \
+ "\n -T N Pause between packets (default 3 seconds)" \
+ "\n -A N Wait N seconds (default 20) after failure" \
+ "\n -x OPT:VAL Include option OPT in sent packets" \
+ "\n -O OPT Request DHCP option OPT (cumulative)" \
+ "\n -o Don't request any options (unless -O is given)" \
+ "\n -f Run in foreground" \
+ USE_FOR_MMU( \
+ "\n -b Background if lease is not obtained" \
+ ) \
+ "\n -S Log to syslog too" \
+ "\n -n Exit if lease is not obtained" \
+ "\n -q Exit after obtaining lease" \
+ "\n -R Release IP on exit" \
+ IF_FEATURE_UDHCP_PORT( \
+ "\n -P N Use port N (default 68)" \
+ ) \
+ IF_FEATURE_UDHCPC_ARPING( \
+ "\n -a Use arping to validate offered address" \
+ ) \
+ "\n -F NAME Ask server to update DNS mapping for NAME" \
+ "\n -H,-h NAME Send NAME as client hostname (default none)" \
+ "\n -V VENDOR Vendor identifier (default 'udhcp VERSION')" \
+ "\n -c CLIENTID Client identifier (default own MAC)" \
+ "\n -C Don't send client identifier" \
+ )
+
+#define udhcpd_trivial_usage \
+ "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
+
+#define udhcpd_full_usage "\n\n" \
+ "DHCP server\n" \
+ "\n -f Run in foreground" \
+ "\n -S Log to syslog too" \
+ IF_FEATURE_UDHCP_PORT( \
+ "\n -P N Use port N (default 67)" \
+ )
+
+#define umount_trivial_usage \
+ "[OPTIONS] FILESYSTEM|DIRECTORY"
+#define umount_full_usage "\n\n" \
+ "Unmount file systems\n" \
+ "\nOptions:" \
+ IF_FEATURE_UMOUNT_ALL( \
+ "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ ) \
+ IF_FEATURE_MTAB_SUPPORT( \
+ "\n -n Don't erase /etc/mtab entries" \
+ ) \
+ "\n -r Try to remount devices as read-only if mount is busy" \
+ "\n -l Lazy umount (detach filesystem)" \
+ "\n -f Force umount (i.e., unreachable NFS server)" \
+ IF_FEATURE_MOUNT_LOOP( \
+ "\n -d Free loop device if it has been used" \
+ )
+
+#define umount_example_usage \
+ "$ umount /dev/hdc1\n"
+
+#define uname_trivial_usage \
+ "[-amnrspv]"
+#define uname_full_usage "\n\n" \
+ "Print system information\n" \
+ "\nOptions:" \
+ "\n -a Print all" \
+ "\n -m The machine (hardware) type" \
+ "\n -n Hostname" \
+ "\n -r OS release" \
+ "\n -s OS name (default)" \
+ "\n -p Processor type" \
+ "\n -v OS version" \
+
+#define uname_example_usage \
+ "$ uname -a\n" \
+ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
+
+#define uncompress_trivial_usage \
+ "[-cf] [FILE]..."
+#define uncompress_full_usage "\n\n" \
+ "Decompress .Z file[s]\n" \
+ "\nOptions:" \
+ "\n -c Write to stdout" \
+ "\n -f Overwrite" \
+
+#define unexpand_trivial_usage \
+ "[-fa][-t N] [FILE]..."
+#define unexpand_full_usage "\n\n" \
+ "Convert spaces to tabs, writing to stdout\n" \
+ "\nOptions:" \
+ IF_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ "\n -a,--all Convert all blanks" \
+ "\n -f,--first-only Convert only leading blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
+ ) \
+ IF_NOT_FEATURE_UNEXPAND_LONG_OPTIONS( \
+ "\n -a Convert all blanks" \
+ "\n -f Convert only leading blanks" \
+ "\n -t N Tabstops every N chars" \
+ )
+
+#define uniq_trivial_usage \
+ "[-cdu][-f,s,w N] [INPUT [OUTPUT]]"
+#define uniq_full_usage "\n\n" \
+ "Discard duplicate lines\n" \
+ "\nOptions:" \
+ "\n -c Prefix lines by the number of occurrences" \
+ "\n -d Only print duplicate lines" \
+ "\n -u Only print unique lines" \
+ "\n -f N Skip first N fields" \
+ "\n -s N Skip first N chars (after any skipped fields)" \
+ "\n -w N Compare N characters in line" \
+
+#define uniq_example_usage \
+ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
+ "a\n" \
+ "b\n" \
+ "c\n"
+
+#define unzip_trivial_usage \
+ "[-opts[modifiers]] FILE[.zip] [LIST] [-x XLIST] [-d DIR]"
+#define unzip_full_usage "\n\n" \
+ "Extract files from ZIP archives\n" \
+ "\nOptions:" \
+ "\n -l List archive contents (with -q for short form)" \
+ "\n -n Never overwrite files (default)" \
+ "\n -o Overwrite" \
+ "\n -p Send output to stdout" \
+ "\n -q Quiet" \
+ "\n -x XLST Exclude these files" \
+ "\n -d DIR Extract files into DIR" \
+
+#define uptime_trivial_usage \
+ ""
+#define uptime_full_usage "\n\n" \
+ "Display the time since the last boot"
+
+#define uptime_example_usage \
+ "$ uptime\n" \
+ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
+
+#define usleep_trivial_usage \
+ "N"
+#define usleep_full_usage "\n\n" \
+ "Pause for N microseconds"
+
+#define usleep_example_usage \
+ "$ usleep 1000000\n" \
+ "[pauses for 1 second]\n"
+
+#define uudecode_trivial_usage \
+ "[-o OUTFILE] [INFILE]"
+#define uudecode_full_usage "\n\n" \
+ "Uudecode a file\n" \
+ "Finds outfile name in uuencoded source unless -o is given"
+
+#define uudecode_example_usage \
+ "$ uudecode -o busybox busybox.uu\n" \
+ "$ ls -l busybox\n" \
+ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n"
+
+#define uuencode_trivial_usage \
+ "[-m] [INFILE] STORED_FILENAME"
+#define uuencode_full_usage "\n\n" \
+ "Uuencode a file to stdout\n" \
+ "\nOptions:" \
+ "\n -m Use base64 encoding per RFC1521" \
+
+#define uuencode_example_usage \
+ "$ uuencode busybox busybox\n" \
+ "begin 755 busybox\n" \
+ "<encoded file snipped>\n" \
+ "$ uudecode busybox busybox > busybox.uu\n" \
+ "$\n"
+
+#define vconfig_trivial_usage \
+ "COMMAND [OPTIONS]"
+#define vconfig_full_usage "\n\n" \
+ "Create and remove virtual ethernet devices\n" \
+ "\nOptions:" \
+ "\n add [interface-name] [vlan_id]" \
+ "\n rem [vlan-name]" \
+ "\n set_flag [interface-name] [flag-num] [0 | 1]" \
+ "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
+ "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
+ "\n set_name_type [name-type]" \
+
+#define vi_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define vi_full_usage "\n\n" \
+ "Edit FILE\n" \
+ "\nOptions:" \
+ IF_FEATURE_VI_COLON( \
+ "\n -c Initial command to run ($EXINIT also available)") \
+ IF_FEATURE_VI_READONLY( \
+ "\n -R Read-only") \
+ "\n -H Short help regarding available features" \
+
+#define vlock_trivial_usage \
+ "[OPTIONS]"
+#define vlock_full_usage "\n\n" \
+ "Lock a virtual terminal. A password is required to unlock.\n" \
+ "\nOptions:" \
+ "\n -a Lock all VTs" \
+
+#define volname_trivial_usage \
+ "[DEVICE]"
+#define volname_full_usage "\n\n" \
+ "Show CD volume name of the DEVICE (default /dev/cdrom)"
+
+#define wall_trivial_usage \
+ "[FILE]"
+#define wall_full_usage "\n\n" \
+ "Write content of FILE or stdin to all logged-in users"
+#define wall_sample_usage \
+ "echo foo | wall\n" \
+ "wall ./mymessage"
+
+#define watch_trivial_usage \
+ "[-n SEC] [-t] PROG ARGS"
+#define watch_full_usage "\n\n" \
+ "Run PROG periodically\n" \
+ "\nOptions:" \
+ "\n -n Loop period in seconds (default 2)" \
+ "\n -t Don't print header" \
+
+#define watch_example_usage \
+ "$ watch date\n" \
+ "Mon Dec 17 10:31:40 GMT 2000\n" \
+ "Mon Dec 17 10:31:42 GMT 2000\n" \
+ "Mon Dec 17 10:31:44 GMT 2000"
+
+#define watchdog_trivial_usage \
+ "[-t N[ms]] [-T N[ms]] [-F] DEV"
+#define watchdog_full_usage "\n\n" \
+ "Periodically write to watchdog device DEV\n" \
+ "\nOptions:" \
+ "\n -T N Reboot after N seconds if not reset (default 60)" \
+ "\n -t N Reset every N seconds (default 30)" \
+ "\n -F Run in foreground" \
+ "\n" \
+ "\nUse 500ms to specify period in milliseconds" \
+
+#define wc_trivial_usage \
+ "[OPTIONS] [FILE]..."
+#define wc_full_usage "\n\n" \
+ "Print line, word, and byte counts for each FILE (or stdin),\n" \
+ "and a total line if more than one FILE is specified\n" \
+ "\nOptions:" \
+ "\n -c Print the byte counts" \
+ "\n -l Print the newline counts" \
+ "\n -L Print the length of the longest line" \
+ "\n -w Print the word counts" \
+
+#define wc_example_usage \
+ "$ wc /etc/passwd\n" \
+ " 31 46 1365 /etc/passwd\n"
+
+#define wget_trivial_usage \
+ IF_FEATURE_WGET_LONG_OPTIONS( \
+ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document FILE]\n" \
+ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
+ " [--no-check-certificate] [-U|--user-agent AGENT] URL" \
+ ) \
+ IF_NOT_FEATURE_WGET_LONG_OPTIONS( \
+ "[-csq] [-O FILE] [-Y on/off] [-P DIR] [-U AGENT] URL" \
+ )
+#define wget_full_usage "\n\n" \
+ "Retrieve files via HTTP or FTP\n" \
+ "\nOptions:" \
+ "\n -s Spider mode - only check file existence" \
+ "\n -c Continue retrieval of aborted transfer" \
+ "\n -q Quiet" \
+ "\n -P Set directory prefix to DIR" \
+ "\n -O FILE Save to FILE ('-' for stdout)" \
+ "\n -U STR Use STR for User-Agent header" \
+ "\n -Y Use proxy ('on' or 'off')" \
+
+#define which_trivial_usage \
+ "[COMMAND]..."
+#define which_full_usage "\n\n" \
+ "Locate a COMMAND"
+#define which_example_usage \
+ "$ which login\n" \
+ "/bin/login\n"
+
+#define who_trivial_usage \
+ "[-a]"
+#define who_full_usage "\n\n" \
+ "Show who is logged on\n" \
+ "\nOptions:" \
+ "\n -a show all" \
+
+#define whoami_trivial_usage \
+ ""
+#define whoami_full_usage "\n\n" \
+ "Print the user name associated with the current effective user id"
+
+#define xargs_trivial_usage \
+ "[OPTIONS] [PROG ARGS]"
+#define xargs_full_usage "\n\n" \
+ "Run PROG on every item given by stdin\n" \
+ "\nOptions:" \
+ IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
+ "\n -p Ask user whether to run each command") \
+ "\n -r Don't run command if input is empty" \
+ IF_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
+ "\n -0 Input is separated by NUL characters") \
+ "\n -t Print the command on stderr before execution" \
+ "\n -e[STR] STR stops input processing" \
+ "\n -n N Pass no more than N args to PROG" \
+ "\n -s N Pass command line of no more than N bytes" \
+ IF_FEATURE_XARGS_SUPPORT_TERMOPT( \
+ "\n -x Exit if size is exceeded") \
+
+#define xargs_example_usage \
+ "$ ls | xargs gzip\n" \
+ "$ find . -name '*.c' -print | xargs rm\n"
+
+#define yes_trivial_usage \
+ "[OPTIONS] [STRING]"
+#define yes_full_usage "\n\n" \
+ "Repeatedly output a line with STRING, or 'y'"
+
+#define zcat_trivial_usage \
+ "FILE"
+#define zcat_full_usage "\n\n" \
+ "Decompress to stdout"
+
+#define zcip_trivial_usage \
+ "[OPTIONS] IFACE SCRIPT"
+#define zcip_full_usage "\n\n" \
+ "Manage a ZeroConf IPv4 link-local address\n" \
+ "\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -q Quit after obtaining address" \
+ "\n -r 169.254.x.x Request this address first" \
+ "\n -v Verbose" \
+ "\n" \
+ "\nWith no -q, runs continuously monitoring for ARP conflicts," \
+ "\nexits only on I/O errors (link down etc)" \
+
+
+#endif