summaryrefslogtreecommitdiff
path: root/include/usage.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/usage.h')
-rw-r--r--include/usage.h84
1 files changed, 17 insertions, 67 deletions
diff --git a/include/usage.h b/include/usage.h
index 912a88f..53832b9 100644
--- a/include/usage.h
+++ b/include/usage.h
@@ -1657,13 +1657,18 @@
"\t-f\t\toutput data as the log grows"
#define losetup_trivial_usage \
- "[OPTION]... LOOPDEVICE FILE\n" \
- "or: losetup [OPTION]... -d LOOPDEVICE"
+ "[-od] LOOPDEVICE [FILE]\n"
#define losetup_full_usage \
- "Associate LOOPDEVICE with FILE.\n\n" \
+ "Associate LOOPDEVICE with FILE, or display current association.\n\n" \
"Options:\n" \
"\t-d\t\tDisassociate LOOPDEVICE\n" \
"\t-o OFFSET\tStart OFFSET bytes into FILE"
+#define losetup_notes_usage \
+ "One argument (losetup /dev/loop1) will display the current association\n" \
+ "(if any), or disassociate it (with -d). The display shows the offset\n" \
+ "and filename of the file the loop device is currently bound to.\n\n" \
+ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
+ "with an optional offset (-o 12345). Encryption is not yet supported.\n\n"
#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
# define USAGE_LS_TIMESTAMPS(a) a
@@ -1946,74 +1951,18 @@
"-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n"
#define modprobe_trivial_usage \
- "[-knqrsv] MODULE [symbol=value ...]"
+ "[-knqrsv] [MODULE ...]"
#define modprobe_full_usage \
+ "Used for high level module loading and unloading.\n\n" \
"Options:\n" \
"\t-k\tMake module autoclean-able\n" \
"\t-n\tJust show what would be done\n" \
"\t-q\tQuiet output\n" \
"\t-r\tRemove module (stacks) or do autoclean\n" \
"\t-s\tReport via syslog instead of stderr\n" \
- "\t-v\tVerbose output\n\n"
-#define modprobe_notes_usage \
-"modprobe can (un)load a stack of modules, passing each module options (when\n" \
-"loading). modprobe uses a configuration file to determine what option(s) to\n" \
-"pass each module it loads.\n" \
-"\n" \
-"The configuration file is searched (in order) amongst:\n" \
-"\n" \
-" /etc/modprobe.conf (2.6 only)\n" \
-" /etc/modules.conf\n" \
-" /etc/conf.modules (deprecated)\n" \
-"\n" \
-"They all have the same syntax (see below). If none is present, it is\n" \
-"_not_ an error; each loaded module is then expected to load without\n" \
-"options. Once a file is found, the others are tested for.\n" \
-"\n" \
-"/etc/modules.conf entry format:\n" \
-"\n" \
-" alias <alias_name> <mod_name>\n" \
-" Makes it possible to modprobe alias_name, when there is no such module.\n" \
-" It makes sense if your mod_name is long, or you want a more reprenstative\n" \
-" name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \
-" This makes it also possible to use a different set of options (below) for\n" \
-" the module and the alias.\n" \
-" A module can be aliased more than once.\n" \
-"\n" \
-" options <mod_name|alias_name> <symbol=value ...>\n" \
-" When loading module mod_name (or the module aliased by alias_name), pass\n" \
-" the \"symbol=value\" pairs as option to that module.\n" \
-"\n" \
-"Sample /etc/modules.conf file:\n" \
-"\n" \
-" options tulip irq=3\n" \
-" alias tulip tulip2\n" \
-" options tulip2 irq=4 io=0x308\n" \
-"\n" \
-"Other functionality offered by 'classic' modprobe is not available in\n" \
-"this implementation.\n" \
-"\n" \
-"If module options are present both in the config file, and on the command line,\n" \
-"then the options from the command line will be passed to the module _after_\n" \
-"the options from the config file. That way, you can have defaults in the config\n" \
-"file, and override them for a specific usage from the command line.\n"
+ "\t-v\tVerbose output"
#define modprobe_example_usage \
- "(with the above /etc/modules.conf):\n\n" \
- "$ modprobe tulip\n" \
- " will load the module 'tulip' with default option 'irq=3'\n\n" \
- "$ modprobe tulip irq=5\n" \
- " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \
- "$ modprobe tulip2\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \
- " which are the default for alias 'tulip2'\n\n" \
- "$ modprobe tulip2 irq=8\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \
- " which are the default for alias 'tulip2' overriden by the option 'irq=8'\n\n" \
- " from the command line\n\n" \
- "$ modprobe tulip2 irq=2 io=0x210\n" \
- " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \
- " which are the default for alias 'tulip2' overriden by the options 'irq=2 io=0x210'\n\n" \
- " from the command line\n"
+ "$ modprobe cdrom\n"
#define more_trivial_usage \
"[FILE ...]"
@@ -2054,12 +2003,13 @@
"\tdev/nodev:\tAllow use of special device files / disallow them\n" \
"\texec/noexec:\tAllow use of executable files / disallow them\n" \
USAGE_MOUNT_LOOP( \
- "\tloop:\t\tMounts a file via loop device\n" \
+ "\tloop:\t\t Ignored (loop devices are autodetected)\n" \
) \
"\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them\n" \
"\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \
"\tro/rw:\t\tMount for read-only / read-write\n" \
- "\tbind:\t\tUse the linux 2.4.x \"bind\" feature\n" \
+ "\tbind:\t\tBind a directory to an additional location\n" \
+ "\tmove:\t\tRelocate an existing mount point.\n" \
"\nThere are EVEN MORE flags that are specific to each filesystem\n" \
"You'll have to see the written documentation for those filesystems"
#define mount_example_usage \
@@ -2068,7 +2018,8 @@
"proc on /proc type proc (rw)\n" \
"devpts on /dev/pts type devpts (rw)\n" \
"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
- "$ mount /tmp/diskimage /opt -t ext2 -o loop\n"
+ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
+ "$ mount cd_image.iso mydir\n"
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
@@ -3008,7 +2959,6 @@
"Telnetd listens for incoming TELNET connections on PORT.\n" \
"Options:\n" \
"\t-p PORT\tlisten for connections on PORT (default 23)\n" \
- "\t-b ADDR\tlisten for connections on ADDR (default 0.0.0.0)\n"\
"\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \
"\t-f issue_file\tDisplay issue_file instead of /etc/issue"
#endif