diff options
Diffstat (limited to 'examples/udhcp')
| -rw-r--r-- | examples/udhcp/udhcpd.conf | 95 |
1 files changed, 31 insertions, 64 deletions
diff --git a/examples/udhcp/udhcpd.conf b/examples/udhcp/udhcpd.conf index 8c9a968..6550cab 100644 --- a/examples/udhcp/udhcpd.conf +++ b/examples/udhcp/udhcpd.conf @@ -1,88 +1,59 @@ # Sample udhcpd configuration file (/etc/udhcpd.conf) +# Values shown are defaults # The start and end of the IP lease block - -start 192.168.0.20 #default: 192.168.0.20 -end 192.168.0.254 #default: 192.168.0.254 - +start 192.168.0.20 +end 192.168.0.254 # The interface that udhcpd will use +interface eth0 -interface eth0 #default: eth0 - - -# The maximim number of leases (includes addressesd reserved -# by OFFER's, DECLINE's, and ARP conficts - -#max_leases 254 #default: 254 - - -# If remaining is true (default), udhcpd will store the time -# remaining for each lease in the udhcpd leases file. This is -# for embedded systems that cannot keep time between reboots. -# If you set remaining to no, the absolute time that the lease -# expires at will be stored in the dhcpd.leases file. - -#remaining yes #default: yes - +# The maximim number of leases (includes addresses reserved +# by OFFER's, DECLINE's, and ARP conficts). Will be corrected +# if it's bigger than IP lease block, but it ok to make it +# smaller than lease block. +#max_leases 254 # The time period at which udhcpd will write out a dhcpd.leases # file. If this is 0, udhcpd will never automatically write a -# lease file. (specified in seconds) - -#auto_time 7200 #default: 7200 (2 hours) - - -# The amount of time that an IP will be reserved (leased) for if a -# DHCP decline message is received (seconds). - -#decline_time 3600 #default: 3600 (1 hour) - - -# The amount of time that an IP will be reserved (leased) for if an -# ARP conflct occurs. (seconds +# lease file. Specified in seconds. +#auto_time 7200 -#conflict_time 3600 #default: 3600 (1 hour) +# The amount of time that an IP will be reserved (leased to nobody) +# if a DHCP decline message is received (seconds). +#decline_time 3600 +# The amount of time that an IP will be reserved +# if an ARP conflct occurs (seconds). +#conflict_time 3600 -# How long an offered address is reserved (leased) in seconds - -#offer_time 60 #default: 60 (1 minute) - -# If a lease to be given is below this value, the full lease time is -# instead used (seconds). - -#min_lease 60 #defult: 60 +# How long an offered address is reserved (seconds). +#offer_time 60 +# If client asks for lease below this value, it will be rounded up +# to this value (seconds). +#min_lease 60 # The location of the leases file - -#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases +#lease_file /var/lib/misc/udhcpd.leases # The location of the pid file -#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid +#pidfile /var/run/udhcpd.pid # Everytime udhcpd writes a leases file, the below script will be called. -# Useful for writing the lease file to flash every few hours. - -#notify_file #default: (no script) - -#notify_file dumpleases # <--- useful for debugging - -# The following are bootp specific options, setable by udhcpd. +#notify_file # default: no script +#notify_file dumpleases # useful for debugging +# The following are bootp specific options, settable by udhcpd. #siaddr 192.168.0.22 #default: 0.0.0.0 - -#sname zorak #default: (none) - -#boot_file /var/nfs_root #default: (none) +#sname zorak #default: none +#boot_file /var/nfs_root #default: none # The remainer of options are DHCP options and can be specifed with the # keyword 'opt' or 'option'. If an option can take multiple items, such # as the dns option, they can be listed on the same line, or multiple # lines. The only option with a default is 'lease'. - -#Examles +# Examples: opt dns 192.168.10.2 192.168.10.10 option subnet 255.255.255.0 opt router 192.168.10.2 @@ -91,8 +62,7 @@ option dns 129.219.13.81 # appened to above DNS servers for a total of 3 option domain local option lease 864000 # 10 days of seconds - -# Currently supported options, for more info, see options.c +# Currently supported options (for more info, see options.c): #opt subnet #opt timezone #opt router @@ -115,9 +85,6 @@ option lease 864000 # 10 days of seconds #opt tftp #opt bootfile - # Static leases map #static_lease 00:60:08:11:CE:4E 192.168.0.54 #static_lease 00:60:08:11:CE:3E 192.168.0.44 - - |