summaryrefslogtreecommitdiff
path: root/examples/udhcp/udhcpd.conf
diff options
context:
space:
mode:
Diffstat (limited to 'examples/udhcp/udhcpd.conf')
-rw-r--r--examples/udhcp/udhcpd.conf116
1 files changed, 116 insertions, 0 deletions
diff --git a/examples/udhcp/udhcpd.conf b/examples/udhcp/udhcpd.conf
new file mode 100644
index 0000000..36cb58c
--- /dev/null
+++ b/examples/udhcp/udhcpd.conf
@@ -0,0 +1,116 @@
+# Sample udhcpd configuration file (/etc/udhcpd.conf)
+
+# The start and end of the IP lease block
+
+start 192.168.0.20 #default: 192.168.0.20
+end 192.168.0.254 #default: 192.168.0.254
+
+
+# The interface that udhcpd will use
+
+interface eth0 #default: eth0
+
+
+# The maximim number of leases (includes addressesd reserved
+# by OFFER's, DECLINE's, and ARP conficts
+
+#max_leases 254 #default: 254
+
+
+# If remaining is true (default), udhcpd will store the time
+# remaining for each lease in the udhcpd leases file. This is
+# for embedded systems that cannot keep time between reboots.
+# If you set remaining to no, the absolute time that the lease
+# expires at will be stored in the dhcpd.leases file.
+
+#remaining yes #default: yes
+
+
+# The time period at which udhcpd will write out a dhcpd.leases
+# file. If this is 0, udhcpd will never automatically write a
+# lease file. (specified in seconds)
+
+#auto_time 7200 #default: 7200 (2 hours)
+
+
+# The amount of time that an IP will be reserved (leased) for if a
+# DHCP decline message is received (seconds).
+
+#decline_time 3600 #default: 3600 (1 hour)
+
+
+# The amount of time that an IP will be reserved (leased) for if an
+# ARP conflct occurs. (seconds
+
+#conflict_time 3600 #default: 3600 (1 hour)
+
+
+# How long an offered address is reserved (leased) in seconds
+
+#offer_time 60 #default: 60 (1 minute)
+
+# If a lease to be given is below this value, the full lease time is
+# instead used (seconds).
+
+#min_lease 60 #defult: 60
+
+
+# The location of the leases file
+
+#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
+
+# The location of the pid file
+#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
+
+# Everytime udhcpd writes a leases file, the below script will be called.
+# Useful for writing the lease file to flash every few hours.
+
+#notify_file #default: (no script)
+
+#notify_file dumpleases # <--- usefull for debugging
+
+# The following are bootp specific options, setable by udhcpd.
+
+#siaddr 192.168.0.22 #default: 0.0.0.0
+
+#sname zorak #default: (none)
+
+#boot_file /var/nfs_root #default: (none)
+
+# The remainer of options are DHCP options and can be specifed with the
+# keyword 'opt' or 'option'. If an option can take multiple items, such
+# as the dns option, they can be listed on the same line, or multiple
+# lines. The only option with a default is 'lease'.
+
+#Examles
+opt dns 192.168.10.2 192.168.10.10
+option subnet 255.255.255.0
+opt router 192.168.10.2
+opt wins 192.168.10.10
+option dns 129.219.13.81 # appened to above DNS servers for a total of 3
+option domain local
+option lease 864000 # 10 days of seconds
+
+
+# Currently supported options, for more info, see options.c
+#subnet
+#timezone
+#router
+#timesvr
+#namesvr
+#dns
+#logsvr
+#cookiesvr
+#lprsvr
+#bootsize
+#domain
+#swapsvr
+#rootpath
+#ipttl
+#mtu
+#broadcast
+#wins
+#lease
+#ntpsrv
+#tftp
+#bootfile \ No newline at end of file