diff options
Diffstat (limited to 'examples/udhcp/udhcpd.conf')
-rw-r--r-- | examples/udhcp/udhcpd.conf | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/examples/udhcp/udhcpd.conf b/examples/udhcp/udhcpd.conf new file mode 100644 index 0000000..36cb58c --- /dev/null +++ b/examples/udhcp/udhcpd.conf @@ -0,0 +1,116 @@ +# Sample udhcpd configuration file (/etc/udhcpd.conf) + +# The start and end of the IP lease block + +start 192.168.0.20 #default: 192.168.0.20 +end 192.168.0.254 #default: 192.168.0.254 + + +# The interface that udhcpd will use + +interface eth0 #default: eth0 + + +# The maximim number of leases (includes addressesd reserved +# by OFFER's, DECLINE's, and ARP conficts + +#max_leases 254 #default: 254 + + +# If remaining is true (default), udhcpd will store the time +# remaining for each lease in the udhcpd leases file. This is +# for embedded systems that cannot keep time between reboots. +# If you set remaining to no, the absolute time that the lease +# expires at will be stored in the dhcpd.leases file. + +#remaining yes #default: yes + + +# The time period at which udhcpd will write out a dhcpd.leases +# file. If this is 0, udhcpd will never automatically write a +# lease file. (specified in seconds) + +#auto_time 7200 #default: 7200 (2 hours) + + +# The amount of time that an IP will be reserved (leased) for if a +# DHCP decline message is received (seconds). + +#decline_time 3600 #default: 3600 (1 hour) + + +# The amount of time that an IP will be reserved (leased) for if an +# ARP conflct occurs. (seconds + +#conflict_time 3600 #default: 3600 (1 hour) + + +# How long an offered address is reserved (leased) in seconds + +#offer_time 60 #default: 60 (1 minute) + +# If a lease to be given is below this value, the full lease time is +# instead used (seconds). + +#min_lease 60 #defult: 60 + + +# The location of the leases file + +#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases + +# The location of the pid file +#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid + +# Everytime udhcpd writes a leases file, the below script will be called. +# Useful for writing the lease file to flash every few hours. + +#notify_file #default: (no script) + +#notify_file dumpleases # <--- usefull for debugging + +# The following are bootp specific options, setable by udhcpd. + +#siaddr 192.168.0.22 #default: 0.0.0.0 + +#sname zorak #default: (none) + +#boot_file /var/nfs_root #default: (none) + +# The remainer of options are DHCP options and can be specifed with the +# keyword 'opt' or 'option'. If an option can take multiple items, such +# as the dns option, they can be listed on the same line, or multiple +# lines. The only option with a default is 'lease'. + +#Examles +opt dns 192.168.10.2 192.168.10.10 +option subnet 255.255.255.0 +opt router 192.168.10.2 +opt wins 192.168.10.10 +option dns 129.219.13.81 # appened to above DNS servers for a total of 3 +option domain local +option lease 864000 # 10 days of seconds + + +# Currently supported options, for more info, see options.c +#subnet +#timezone +#router +#timesvr +#namesvr +#dns +#logsvr +#cookiesvr +#lprsvr +#bootsize +#domain +#swapsvr +#rootpath +#ipttl +#mtu +#broadcast +#wins +#lease +#ntpsrv +#tftp +#bootfile
\ No newline at end of file |