1 files changed, 0 insertions, 467 deletions

diff --git a/e2fsprogs/old_e2fsprogs/ext2fs/icount.c b/e2fsprogs/old_e2fsprogs/ext2fs/icount.c
deleted file mode 100644
index 7ab5f51..0000000
--- a/e2fsprogs/old_e2fsprogs/ext2fs/icount.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * icount.c --- an efficient inode count abstraction
- *
- * Copyright (C) 1997 Theodore Ts'o.
- *
- * %Begin-Header%
- * This file may be redistributed under the terms of the GNU Public
- * License.
- * %End-Header%
- */
-
-#if HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-#include <string.h>
-#include <stdio.h>
-
-#include "ext2_fs.h"
-#include "ext2fs.h"
-
-/*
- * The data storage strategy used by icount relies on the observation
- * that most inode counts are either zero (for non-allocated inodes),
- * one (for most files), and only a few that are two or more
- * (directories and files that are linked to more than one directory).
- *
- * Also, e2fsck tends to load the icount data sequentially.
- *
- * So, we use an inode bitmap to indicate which inodes have a count of
- * one, and then use a sorted list to store the counts for inodes
- * which are greater than one.
- *
- * We also use an optional bitmap to indicate which inodes are already
- * in the sorted list, to speed up the use of this abstraction by
- * e2fsck's pass 2.  Pass 2 increments inode counts as it finds them,
- * so this extra bitmap avoids searching the sorted list to see if a
- * particular inode is on the sorted list already.
- */
-
-struct ext2_icount_el {
-	ext2_ino_t	ino;
-	__u16	count;
-};
-
-struct ext2_icount {
-	errcode_t		magic;
-	ext2fs_inode_bitmap	single;
-	ext2fs_inode_bitmap	multiple;
-	ext2_ino_t		count;
-	ext2_ino_t		size;
-	ext2_ino_t		num_inodes;
-	ext2_ino_t		cursor;
-	struct ext2_icount_el	*list;
-};
-
-void ext2fs_free_icount(ext2_icount_t icount)
-{
-	if (!icount)
-		return;
-
-	icount->magic = 0;
-	ext2fs_free_mem(&icount->list);
-	ext2fs_free_inode_bitmap(icount->single);
-	ext2fs_free_inode_bitmap(icount->multiple);
-	ext2fs_free_mem(&icount);
-}
-
-errcode_t ext2fs_create_icount2(ext2_filsys fs, int flags, unsigned int size,
-				ext2_icount_t hint, ext2_icount_t *ret)
-{
-	ext2_icount_t	icount;
-	errcode_t	retval;
-	size_t		bytes;
-	ext2_ino_t	i;
-
-	if (hint) {
-		EXT2_CHECK_MAGIC(hint, EXT2_ET_MAGIC_ICOUNT);
-		if (hint->size > size)
-			size = (size_t) hint->size;
-	}
-
-	retval = ext2fs_get_mem(sizeof(struct ext2_icount), &icount);
-	if (retval)
-		return retval;
-	memset(icount, 0, sizeof(struct ext2_icount));
-
-	retval = ext2fs_allocate_inode_bitmap(fs, 0,
-					      &icount->single);
-	if (retval)
-		goto errout;
-
-	if (flags & EXT2_ICOUNT_OPT_INCREMENT) {
-		retval = ext2fs_allocate_inode_bitmap(fs, 0,
-						      &icount->multiple);
-		if (retval)
-			goto errout;
-	} else
-		icount->multiple = 0;
-
-	if (size) {
-		icount->size = size;
-	} else {
-		/*
-		 * Figure out how many special case inode counts we will
-		 * have.  We know we will need one for each directory;
-		 * we also need to reserve some extra room for file links
-		 */
-		retval = ext2fs_get_num_dirs(fs, &icount->size);
-		if (retval)
-			goto errout;
-		icount->size += fs->super->s_inodes_count / 50;
-	}
-
-	bytes = (size_t) (icount->size * sizeof(struct ext2_icount_el));
-	retval = ext2fs_get_mem(bytes, &icount->list);
-	if (retval)
-		goto errout;
-	memset(icount->list, 0, bytes);
-
-	icount->magic = EXT2_ET_MAGIC_ICOUNT;
-	icount->count = 0;
-	icount->cursor = 0;
-	icount->num_inodes = fs->super->s_inodes_count;
-
-	/*
-	 * Populate the sorted list with those entries which were
-	 * found in the hint icount (since those are ones which will
-	 * likely need to be in the sorted list this time around).
-	 */
-	if (hint) {
-		for (i=0; i < hint->count; i++)
-			icount->list[i].ino = hint->list[i].ino;
-		icount->count = hint->count;
-	}
-
-	*ret = icount;
-	return 0;
-
-errout:
-	ext2fs_free_icount(icount);
-	return retval;
-}
-
-errcode_t ext2fs_create_icount(ext2_filsys fs, int flags,
-			       unsigned int size,
-			       ext2_icount_t *ret)
-{
-	return ext2fs_create_icount2(fs, flags, size, 0, ret);
-}
-
-/*
- * insert_icount_el() --- Insert a new entry into the sorted list at a
- *	specified position.
- */
-static struct ext2_icount_el *insert_icount_el(ext2_icount_t icount,
-					    ext2_ino_t ino, int pos)
-{
-	struct ext2_icount_el	*el;
-	errcode_t		retval;
-	ext2_ino_t			new_size = 0;
-	int			num;
-
-	if (icount->count >= icount->size) {
-		if (icount->count) {
-			new_size = icount->list[(unsigned)icount->count-1].ino;
-			new_size = (ext2_ino_t) (icount->count *
-				((float) icount->num_inodes / new_size));
-		}
-		if (new_size < (icount->size + 100))
-			new_size = icount->size + 100;
-		retval = ext2fs_resize_mem((size_t) icount->size *
-					   sizeof(struct ext2_icount_el),
-					   (size_t) new_size *
-					   sizeof(struct ext2_icount_el),
-					   &icount->list);
-		if (retval)
-			return 0;
-		icount->size = new_size;
-	}
-	num = (int) icount->count - pos;
-	if (num < 0)
-		return 0;	/* should never happen */
-	if (num) {
-		memmove(&icount->list[pos+1], &icount->list[pos],
-			sizeof(struct ext2_icount_el) * num);
-	}
-	icount->count++;
-	el = &icount->list[pos];
-	el->count = 0;
-	el->ino = ino;
-	return el;
-}
-
-/*
- * get_icount_el() --- given an inode number, try to find icount
- *	information in the sorted list.  If the create flag is set,
- *	and we can't find an entry, create one in the sorted list.
- */
-static struct ext2_icount_el *get_icount_el(ext2_icount_t icount,
-					    ext2_ino_t ino, int create)
-{
-	float	range;
-	int	low, high, mid;
-	ext2_ino_t	lowval, highval;
-
-	if (!icount || !icount->list)
-		return 0;
-
-	if (create && ((icount->count == 0) ||
-		       (ino > icount->list[(unsigned)icount->count-1].ino))) {
-		return insert_icount_el(icount, ino, (unsigned) icount->count);
-	}
-	if (icount->count == 0)
-		return 0;
-
-	if (icount->cursor >= icount->count)
-		icount->cursor = 0;
-	if (ino == icount->list[icount->cursor].ino)
-		return &icount->list[icount->cursor++];
-	low = 0;
-	high = (int) icount->count-1;
-	while (low <= high) {
-		if (low == high)
-			mid = low;
-		else {
-			/* Interpolate for efficiency */
-			lowval = icount->list[low].ino;
-			highval = icount->list[high].ino;
-
-			if (ino < lowval)
-				range = 0;
-			else if (ino > highval)
-				range = 1;
-			else
-				range = ((float) (ino - lowval)) /
-					(highval - lowval);
-			mid = low + ((int) (range * (high-low)));
-		}
-		if (ino == icount->list[mid].ino) {
-			icount->cursor = mid+1;
-			return &icount->list[mid];
-		}
-		if (ino < icount->list[mid].ino)
-			high = mid-1;
-		else
-			low = mid+1;
-	}
-	/*
-	 * If we need to create a new entry, it should be right at
-	 * low (where high will be left at low-1).
-	 */
-	if (create)
-		return insert_icount_el(icount, ino, low);
-	return 0;
-}
-
-errcode_t ext2fs_icount_validate(ext2_icount_t icount, FILE *out)
-{
-	errcode_t	ret = 0;
-	unsigned int	i;
-	const char *bad = "bad icount";
-
-	EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT);
-
-	if (icount->count > icount->size) {
-		fprintf(out, "%s: count > size\n", bad);
-		return EXT2_ET_INVALID_ARGUMENT;
-	}
-	for (i=1; i < icount->count; i++) {
-		if (icount->list[i-1].ino >= icount->list[i].ino) {
-			fprintf(out, "%s: list[%d].ino=%u, list[%d].ino=%u\n",
-				bad, i-1, icount->list[i-1].ino,
-				i, icount->list[i].ino);
-			ret = EXT2_ET_INVALID_ARGUMENT;
-		}
-	}
-	return ret;
-}
-
-errcode_t ext2fs_icount_fetch(ext2_icount_t icount, ext2_ino_t ino, __u16 *ret)
-{
-	struct ext2_icount_el	*el;
-
-	EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT);
-
-	if (!ino || (ino > icount->num_inodes))
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	if (ext2fs_test_inode_bitmap(icount->single, ino)) {
-		*ret = 1;
-		return 0;
-	}
-	if (icount->multiple &&
-	    !ext2fs_test_inode_bitmap(icount->multiple, ino)) {
-		*ret = 0;
-		return 0;
-	}
-	el = get_icount_el(icount, ino, 0);
-	if (!el) {
-		*ret = 0;
-		return 0;
-	}
-	*ret = el->count;
-	return 0;
-}
-
-errcode_t ext2fs_icount_increment(ext2_icount_t icount, ext2_ino_t ino,
-				  __u16 *ret)
-{
-	struct ext2_icount_el	*el;
-
-	EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT);
-
-	if (!ino || (ino > icount->num_inodes))
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	if (ext2fs_test_inode_bitmap(icount->single, ino)) {
-		/*
-		 * If the existing count is 1, then we know there is
-		 * no entry in the list.
-		 */
-		el = get_icount_el(icount, ino, 1);
-		if (!el)
-			return EXT2_ET_NO_MEMORY;
-		ext2fs_unmark_inode_bitmap(icount->single, ino);
-		el->count = 2;
-	} else if (icount->multiple) {
-		/*
-		 * The count is either zero or greater than 1; if the
-		 * inode is set in icount->multiple, then there should
-		 * be an entry in the list, so find it using
-		 * get_icount_el().
-		 */
-		if (ext2fs_test_inode_bitmap(icount->multiple, ino)) {
-			el = get_icount_el(icount, ino, 1);
-			if (!el)
-				return EXT2_ET_NO_MEMORY;
-			el->count++;
-		} else {
-			/*
-			 * The count was zero; mark the single bitmap
-			 * and return.
-			 */
-		zero_count:
-			ext2fs_mark_inode_bitmap(icount->single, ino);
-			if (ret)
-				*ret = 1;
-			return 0;
-		}
-	} else {
-		/*
-		 * The count is either zero or greater than 1; try to
-		 * find an entry in the list to determine which.
-		 */
-		el = get_icount_el(icount, ino, 0);
-		if (!el) {
-			/* No entry means the count was zero */
-			goto zero_count;
-		}
-		el = get_icount_el(icount, ino, 1);
-		if (!el)
-			return EXT2_ET_NO_MEMORY;
-		el->count++;
-	}
-	if (icount->multiple)
-		ext2fs_mark_inode_bitmap(icount->multiple, ino);
-	if (ret)
-		*ret = el->count;
-	return 0;
-}
-
-errcode_t ext2fs_icount_decrement(ext2_icount_t icount, ext2_ino_t ino,
-				  __u16 *ret)
-{
-	struct ext2_icount_el	*el;
-
-	if (!ino || (ino > icount->num_inodes))
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT);
-
-	if (ext2fs_test_inode_bitmap(icount->single, ino)) {
-		ext2fs_unmark_inode_bitmap(icount->single, ino);
-		if (icount->multiple)
-			ext2fs_unmark_inode_bitmap(icount->multiple, ino);
-		else {
-			el = get_icount_el(icount, ino, 0);
-			if (el)
-				el->count = 0;
-		}
-		if (ret)
-			*ret = 0;
-		return 0;
-	}
-
-	if (icount->multiple &&
-	    !ext2fs_test_inode_bitmap(icount->multiple, ino))
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	el = get_icount_el(icount, ino, 0);
-	if (!el || el->count == 0)
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	el->count--;
-	if (el->count == 1)
-		ext2fs_mark_inode_bitmap(icount->single, ino);
-	if ((el->count == 0) && icount->multiple)
-		ext2fs_unmark_inode_bitmap(icount->multiple, ino);
-
-	if (ret)
-		*ret = el->count;
-	return 0;
-}
-
-errcode_t ext2fs_icount_store(ext2_icount_t icount, ext2_ino_t ino,
-			      __u16 count)
-{
-	struct ext2_icount_el	*el;
-
-	if (!ino || (ino > icount->num_inodes))
-		return EXT2_ET_INVALID_ARGUMENT;
-
-	EXT2_CHECK_MAGIC(icount, EXT2_ET_MAGIC_ICOUNT);
-
-	if (count == 1) {
-		ext2fs_mark_inode_bitmap(icount->single, ino);
-		if (icount->multiple)
-			ext2fs_unmark_inode_bitmap(icount->multiple, ino);
-		return 0;
-	}
-	if (count == 0) {
-		ext2fs_unmark_inode_bitmap(icount->single, ino);
-		if (icount->multiple) {
-			/*
-			 * If the icount->multiple bitmap is enabled,
-			 * we can just clear both bitmaps and we're done
-			 */
-			ext2fs_unmark_inode_bitmap(icount->multiple, ino);
-		} else {
-			el = get_icount_el(icount, ino, 0);
-			if (el)
-				el->count = 0;
-		}
-		return 0;
-	}
-
-	/*
-	 * Get the icount element
-	 */
-	el = get_icount_el(icount, ino, 1);
-	if (!el)
-		return EXT2_ET_NO_MEMORY;
-	el->count = count;
-	ext2fs_unmark_inode_bitmap(icount->single, ino);
-	if (icount->multiple)
-		ext2fs_mark_inode_bitmap(icount->multiple, ino);
-	return 0;
-}
-
-ext2_ino_t ext2fs_get_icount_size(ext2_icount_t icount)
-{
-	if (!icount || icount->magic != EXT2_ET_MAGIC_ICOUNT)
-		return 0;
-
-	return icount->size;
-}