diff options
| -rw-r--r-- | include/applets.h | 3 | ||||
| -rw-r--r-- | include/busybox.h | 1 | ||||
| -rw-r--r-- | include/usage.h | 745 |
3 files changed, 379 insertions, 370 deletions
diff --git a/include/applets.h b/include/applets.h index d3e38d8..d4a5564 100644 --- a/include/applets.h +++ b/include/applets.h @@ -15,7 +15,6 @@ #undef APPLET_ODDNAME #undef APPLET_NOUSAGE - #if defined(PROTOTYPES) # define APPLET(a,b,c) extern int a##_main(int argc, char **argv); # define APPLET_NOUSAGE(a,b,c,d) extern int b##_main(int argc, char **argv); @@ -64,8 +63,6 @@ USE_BASENAME(APPLET(basename, _BB_DIR_USR_BIN, _BB_SUID_NEVER)) USE_BBCONFIG(APPLET(bbconfig, _BB_DIR_BIN, _BB_SUID_NEVER)) //USE_BBSH(APPLET(bbsh, _BB_DIR_BIN, _BB_SUID_NEVER)) USE_BUNZIP2(APPLET(bunzip2, _BB_DIR_USR_BIN, _BB_SUID_NEVER)) -/* Always enabled. */ -APPLET_NOUSAGE(busybox, busybox, _BB_DIR_BIN, _BB_SUID_MAYBE) USE_BUNZIP2(APPLET_ODDNAME(bzcat, bunzip2, _BB_DIR_USR_BIN, _BB_SUID_NEVER, bzcat)) USE_CAL(APPLET(cal, _BB_DIR_USR_BIN, _BB_SUID_NEVER)) USE_CAT(APPLET(cat, _BB_DIR_BIN, _BB_SUID_NEVER)) diff --git a/include/busybox.h b/include/busybox.h index a7a0f49..a1139b5 100644 --- a/include/busybox.h +++ b/include/busybox.h @@ -32,6 +32,7 @@ struct BB_applet { }; /* From busybox.c and applet.c */ +extern int busybox_main(int argc, char **argv); extern const struct BB_applet applets[]; extern const unsigned short NUM_APPLETS; diff --git a/include/usage.h b/include/usage.h index 701b421..a9718d7 100644 --- a/include/usage.h +++ b/include/usage.h @@ -14,15 +14,15 @@ #define addgroup_trivial_usage \ "[-g GID] group_name [user_name]" #define addgroup_full_usage \ - "Adds a group to the system\n\n" \ - "Options:\n" \ + "Adds a group to the system" \ + "\n\nOptions:\n" \ " -g GID specify gid" #define adduser_trivial_usage \ "[OPTIONS] user_name" #define adduser_full_usage \ - "Adds a user to the system\n\n" \ - "Options:\n" \ + "Adds a user to the system" \ + "\n\nOptions:\n" \ " -h DIR Assign home directory DIR\n" \ " -g GECOS Assign gecos field GECOS\n" \ " -s SHELL Assign login shell SHELL\n" \ @@ -35,8 +35,8 @@ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage \ "Reads and optionally sets system timebase parameters.\n" \ - "See adjtimex(2).\n\n" \ - "Options:\n" \ + "See adjtimex(2)." \ + "\n\nOptions:\n" \ " -q quiet mode - do not print\n" \ " -o offset time offset, microseconds\n" \ " -f frequency frequency adjust, integer kernel units (65536 is 1ppm)\n" \ @@ -47,19 +47,19 @@ #define ar_trivial_usage \ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" #define ar_full_usage \ - "Extract or list FILES from an ar archive.\n\n" \ - "Options:\n" \ - " -o preserve original dates\n" \ - " -p extract to stdout\n" \ - " -t list\n" \ - " -x extract\n" \ - " -v verbosely list files processed" + "Extract or list FILES from an ar archive" \ + "\n\nOptions:\n" \ + " -o preserve original dates\n" \ + " -p extract to stdout\n" \ + " -t list\n" \ + " -x extract\n" \ + " -v verbosely list files processed" #define arping_trivial_usage \ "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target" #define arping_full_usage \ - "Ping hosts by ARP requests/replies.\n\n" \ - "Options:\n" \ + "Ping hosts by ARP requests/replies" \ + "\n\nOptions:\n" \ " -f Quit on first ARP reply\n" \ " -q Be quiet\n" \ " -b Keep broadcasting, don't go unicast\n" \ @@ -102,8 +102,8 @@ #define bunzip2_trivial_usage \ "[OPTION]... [FILE]" #define bunzip2_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ - "Options:\n" \ + "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ + "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force" @@ -118,8 +118,8 @@ #define unlzma_trivial_usage \ "[OPTION]... [FILE]" #define unlzma_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ - "Options:\n" \ + "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ + "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force" @@ -131,16 +131,16 @@ #define cal_trivial_usage \ "[-jy] [[month] year]" #define cal_full_usage \ - "Display a calendar.\n" \ - "\nOptions:\n" \ + "Display a calendar" \ + "\n\nOptions:\n" \ " -j Use julian dates\n" \ " -y Display the entire year" #define cat_trivial_usage \ "[-u] [FILE]..." #define cat_full_usage \ - "Concatenates FILE(s) and prints them to stdout.\n\n" \ - "Options:\n" \ + "Concatenates FILE(s) and prints them to stdout" \ + "\n\nOptions:\n" \ " -u ignored since unbuffered i/o is always used" #define cat_example_usage \ "$ cat /proc/uptime\n" \ @@ -149,7 +149,8 @@ #define catv_trivial_usage \ "[-etv] [FILE]..." #define catv_full_usage \ - "Display nonprinting characters as ^x or M-x.\n\n"\ + "Display nonprinting characters as ^x or M-x" \ + "\n\nOptions:\n" \ " -e End each line with $\n" \ " -t Show tabs as ^I\n" \ " -v Don't use ^x or M-x escapes." @@ -173,15 +174,15 @@ " S write file contents synchronously\n" \ " t disable tail-merging of partial blocks with other files\n" \ " u allow file to be undeleted\n" \ - "Options:\n" \ + " Options:\n" \ " -R recursively list subdirectories\n" \ " -v set the file's version/generation number" #define chgrp_trivial_usage \ "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..." #define chgrp_full_usage \ - "Change the group membership of each FILE to GROUP.\n" \ - "\nOptions:\n" \ + "Change the group membership of each FILE to GROUP" \ + "\n\nOptions:\n" \ " -R Changes files and directories recursively\n" \ " -h Do not dereference symbolic links" \ USE_DESKTOP( \ @@ -200,9 +201,9 @@ "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." #define chmod_full_usage \ "Each MODE is one or more of the letters ugoa, one of the\n" \ - "symbols +-= and one or more of the letters rwxst.\n\n" \ - "Options:\n" \ - " -R Changes files and directories recursively" \ + "symbols +-= and one or more of the letters rwxst" \ + "\n\nOptions:" \ + "\n -R Changes files and directories recursively" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ @@ -221,10 +222,10 @@ #define chown_trivial_usage \ "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage \ - "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \ - "\nOptions:\n" \ - " -R Changes files and directories recursively\n" \ - " -h Do not dereference symbolic links" \ + "Change the owner and/or group of each FILE to OWNER and/or GROUP" \ + "\n\nOptions:" \ + "\n -R Changes files and directories recursively" \ + "\n -h Do not dereference symbolic links" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ @@ -245,7 +246,8 @@ "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ "[-p processes] [-f bytes] [-c bytes] prog args" #define chpst_full_usage \ - "Change the process state and run specified program.\n\n" \ + "Change the process state and run specified program" \ + "\n\nOptions:\n" \ " -u user[:grp] set uid and gid\n" \ " -U user[:grp] set environment variables UID and GID\n" \ " -e dir set environment variables as specified by files\n" \ @@ -334,8 +336,8 @@ #define cmp_trivial_usage \ "[-l] [-s] FILE1 [FILE2]" #define cmp_full_usage \ - "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \ - "Options:\n" \ + "Compares FILE1 vs stdin if FILE2 is not specified" \ + "\n\nOptions:\n" \ " -l Write the byte numbers (decimal) and values (octal)\n" \ " for all differing bytes\n" \ " -s quiet mode - do not print" @@ -343,8 +345,8 @@ #define comm_trivial_usage \ "[-123] FILE1 FILE2" #define comm_full_usage \ - "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \ - "Options:\n" \ + "Compares FILE1 to FILE2, or to stdin if = is specified" \ + "\n\nOptions:\n" \ " -1 Suppress lines unique to FILE1\n" \ " -2 Suppress lines unique to FILE2\n" \ " -3 Suppress lines common to both files" @@ -414,8 +416,8 @@ #define cut_trivial_usage \ "[OPTION]... [FILE]..." #define cut_full_usage \ - "Prints selected fields from each input FILE to standard output.\n\n" \ - "Options:\n" \ + "Prints selected fields from each input FILE to standard output" \ + "\n\nOptions:\n" \ " -b LIST Output only bytes from LIST\n" \ " -c LIST Output only characters from LIST\n" \ " -d CHAR Use CHAR instead of tab as the field delimiter\n" \ @@ -431,8 +433,8 @@ #define date_trivial_usage \ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" #define date_full_usage \ - "Displays the current time in the given FORMAT, or sets the system date.\n" \ - "\nOptions:\n" \ + "Displays the current time in the given FORMAT, or sets the system date" \ + "\n\nOptions:\n" \ " -R Outputs RFC-822 compliant date string\n" \ " -d STRING Displays time described by STRING, not 'now'\n" \ USE_FEATURE_DATE_ISOFMT( \ @@ -455,8 +457,8 @@ "This is a Tiny RPN calculator that understands the\n" \ "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ "**, exp, and, or, not, eor.\n" \ - "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \ - "\nOptions:\n" \ + "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \ + "\n\nOptions:\n" \ "p - Prints the value on the top of the stack, without altering the stack\n" \ "f - Prints the entire contents of the stack without altering anything\n" \ "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ @@ -477,7 +479,8 @@ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") #define dd_full_usage \ - "Copy a file, converting and formatting according to options\n\n" \ + "Copy a file with converting and formatting" \ + "\n\nOptions:\n" \ " if=FILE read from FILE instead of stdin\n" \ " of=FILE write to FILE instead of stdout\n" \ " bs=N read and write N bytes at a time\n" \ @@ -519,8 +522,8 @@ "mntpnt [-v]" \ USE_DEVFSD_FG_NP("[-fg][-np]" ) #define devfsd_full_usage \ - "Optional daemon for managing devfs permissions and old device name symlinks.\n" \ - "\nOptions:" \ + "Optional daemon for managing devfs permissions and old device name symlinks" \ + "\n\nOptions:" \ "\n mntpnt The mount point where devfs is mounted." \ "\n -v Print the protocol version numbers for devfsd." \ "\n and the kernel-side protocol version and exits." \ @@ -533,8 +536,8 @@ #define df_trivial_usage \ "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]" #define df_full_usage \ - "Print the filesystem space used and space available.\n\n" \ - "Options:\n" \ + "Print the filesystem space used and space available" \ + "\n\nOptions:\n" \ USE_FEATURE_HUMAN_READABLE( \ "\n -h print sizes in human readable format (e.g., 1K 243M 2G )\n" \ " -m print sizes in megabytes\n" \ @@ -564,8 +567,8 @@ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" #define diff_full_usage \ "Compare files line by line and output the differences between them.\n" \ - "This diff implementation only supports unified diffs.\n\n" \ - "Options:\n" \ + "This diff implementation only supports unified diffs." \ + "\n\nOptions:\n" \ " -a Treat all files as text\n" \ " -b Ignore changes in the amount of whitespace\n" \ " -d Try hard to find a smaller set of changes\n" \ @@ -594,8 +597,8 @@ #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage \ - "Prints or controls the kernel ring buffer\n\n" \ - "Options:\n" \ + "Prints or controls the kernel ring buffer" \ + "\n\nOptions:\n" \ " -c Clears the ring buffer's contents after printing\n" \ " -n LEVEL Sets console logging level\n" \ " -s SIZE Use a buffer of size SIZE" @@ -603,8 +606,8 @@ #define dnsd_trivial_usage \ "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" #define dnsd_full_usage \ - "Small and static DNS server daemon\n\n" \ - "Options:\n" \ + "Small and static DNS server daemon" \ + "\n\nOptions:\n" \ " -c config filename\n" \ " -t TTL in seconds\n" \ " -p listening port\n" \ @@ -616,16 +619,16 @@ #define dos2unix_full_usage \ "Converts FILE from dos format to unix format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ - "When no file is given, uses stdin for input and stdout for output.\n\n" \ - "Options:\n" \ + "When no file is given, uses stdin for input and stdout for output." \ + "\n\nOptions:\n" \ " -u output will be in UNIX format\n" \ " -d output will be in DOS format" #define dpkg_trivial_usage \ "[-ilCPru] [-F option] package_name" #define dpkg_full_usage \ - "dpkg is a utility to install, remove and manage Debian packages.\n\n" \ - "Options:\n" \ + "Install, remove and manage Debian packages" \ + "\n\nOptions:\n" \ " -i Install the package\n" \ " -l List of installed packages\n" \ " -C Configure an unpackaged package\n" \ @@ -637,8 +640,8 @@ #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [argument]" #define dpkg_deb_full_usage \ - "Perform actions on Debian packages (.debs)\n\n" \ - "Options:\n" \ + "Perform actions on Debian packages (.debs)" \ + "\n\nOptions:\n" \ " -c List contents of filesystem tree\n" \ " -e Extract control files to [argument] directory\n" \ " -f Display control field name starting with [argument]\n" \ @@ -654,8 +657,8 @@ "Disk space is printed in units of " \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ - " bytes.\n\n" \ - "Options:\n" \ + " bytes." \ + "\n\nOptions:\n" \ " -a show sizes of files in addition to directories\n" \ " -H follow symbolic links that are FILE command line args\n" \ " -L follow all symbolic links encountered\n" \ @@ -693,8 +696,8 @@ #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage \ - "Displays the DHCP leases granted by udhcpd.\n\n" \ - "Options:\n" \ + "Display DHCP leases granted by udhcpd" \ + "\n\nOptions:\n" \ " -f, --file=FILENAME Leases file to load\n" \ " -r, --remaining Interpret lease times as time remaining\n" \ " -a, --absolute Interpret lease times as expire time" @@ -705,8 +708,8 @@ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ "[-E extended-options] device" #define e2fsck_full_usage \ - "Check a Linux ext2/ext3 file system.\n\n" \ - "Options:\n" \ + "Check ext2/ext3 file system" \ + "\n\nOptions:\n" \ " -p Automatic repair (no questions)\n" \ " -n Make no changes to the filesystem\n" \ " -y Assume 'yes' to all questions\n" \ @@ -722,9 +725,9 @@ #define echo_trivial_usage \ USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]" #define echo_full_usage \ - "Prints the specified ARGs to stdout\n\n" \ + "Print the specified ARGs to stdout" \ USE_FEATURE_FANCY_ECHO( \ - "Options:\n" \ + "\n\nOptions:\n" \ " -n suppress trailing newline\n" \ " -e interpret backslash-escaped characters (i.e., \\t=tab)\n" \ " -E disable interpretation of backslash-escaped characters" \ @@ -742,8 +745,8 @@ #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" #define eject_full_usage \ - "Eject specified DEVICE (or default /dev/cdrom).\n\n" \ - "Options:\n" \ + "Eject specified DEVICE (or default /dev/cdrom)" \ + "\n\nOptions:\n" \ " -t close tray\n" \ " -T open/close tray (toggle)" @@ -753,9 +756,9 @@ #define env_trivial_usage \ "[-iu] [-] [name=value]... [command]" #define env_full_usage \ - "Prints the current environment or runs a program after setting\n" \ - "up the specified environment.\n\n" \ - "Options:\n" \ + "Print the current environment or runs a program after setting\n" \ + "up the specified environment" \ + "\n\nOptions:\n" \ " -, -i start with an empty environment\n" \ " -u remove variable from the environment" @@ -764,8 +767,8 @@ #define ether_wake_full_usage \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ - " a hostname with a known 'ethers' entry.\n\n" \ - "Options:\n" \ + "a hostname with a known 'ethers' entry." \ + "\n\nOptions:\n" \ " -b Send wake-up packet to the broadcast address\n" \ " -i iface Use interface ifname instead of the default \"eth0\"\n" \ " -p pass Append the four or six byte password PW to the packet" @@ -806,7 +809,8 @@ #define fakeidentd_trivial_usage \ "[-b ip] [STRING]" #define fakeidentd_full_usage \ - "Returns a set string to auth requests\n\n" \ + "Returns a set string to auth requests" \ + "\n\nOptions:\n" \ " -b Bind to ip address\n" \ " STRING The ident answer string (default is nobody)" @@ -841,15 +845,15 @@ #define fdformat_trivial_usage \ "[-n] DEVICE" #define fdformat_full_usage \ - "Low-level formats a floppy disk\n\n" \ - "Options:\n" \ + "Low-level formats a floppy disk" \ + "\n\nOptions:\n" \ " -n Don't verify after format" #define fdisk_trivial_usage \ "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" #define fdisk_full_usage \ - "Change partition table\n" \ - "Options:\n" \ + "Change partition table" \ + "\n\nOptions:\n" \ " -l List partition table(s)\n" \ " -u Give Start and End in sector (instead of cylinder) units\n" \ " -s PARTITION Give partition size(s) in blocks\n" \ @@ -903,8 +907,8 @@ "[-bs] [-w WIDTH] [FILE]" #define fold_full_usage \ "Wrap input lines in each FILE (standard input by default), writing to\n" \ - "standard output.\n\n" \ - "Options:\n" \ + "standard output" \ + "\n\nOptions:\n" \ " -b count bytes rather than columns\n" \ " -s break at spaces\n" \ " -w use WIDTH columns instead of 80" @@ -930,8 +934,8 @@ #define fsck_trivial_usage \ "[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]" #define fsck_full_usage \ - "Check and repair filesystems.\n\n" \ - "Options:\n" \ + "Check and repair filesystems" \ + "\n\nOptions:\n" \ " -A Walk /etc/fstab and check all filesystems\n" \ " -N Don't execute, just show what would be done\n" \ " -P When using -A, check filesystems in parallel\n" \ @@ -944,8 +948,8 @@ #define fsck_minix_trivial_usage \ "[-larvsmf] /dev/name" #define fsck_minix_full_usage \ - "Performs a consistency check for MINIX filesystems.\n\n" \ - "Options:\n" \ + "Performs a consistency check for MINIX filesystems" \ + "\n\nOptions:\n" \ " -l Lists all filenames\n" \ " -r Perform interactive repairs\n" \ " -a Perform automatic repairs\n" \ @@ -957,8 +961,8 @@ #define ftpget_trivial_usage \ "[options] remote-host local-file remote-file" #define ftpget_full_usage \ - "Retrieve a remote file via FTP.\n\n" \ - "Options:\n" \ + "Retrieve a remote file via FTP" \ + "\n\nOptions:\n" \ " -c, --continue Continue a previous transfer\n" \ " -v, --verbose Verbose\n" \ " -u, --username Username to be used\n" \ @@ -968,8 +972,8 @@ #define ftpput_trivial_usage \ "[options] remote-host remote-file local-file" #define ftpput_full_usage \ - "Store a local file on a remote machine via FTP.\n\n" \ - "Options:\n" \ + "Store a local file on a remote machine via FTP" \ + "\n\nOptions:\n" \ " -v, --verbose Verbose\n" \ " -u, --username Username to be used\n" \ " -p, --password Password to be used\n" \ @@ -1023,8 +1027,8 @@ #define getty_trivial_usage \ "[OPTIONS]... baud_rate,... line [termtype]" #define getty_full_usage \ - "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \ - "Options:\n" \ + "Open a tty, prompt for a login name, then invoke /bin/login" \ + "\n\nOptions:\n" \ " -h Enable hardware (RTS/CTS) flow control\n" \ " -i Do not display /etc/issue before running login\n" \ " -L Local line, so do not do carrier detect\n" \ @@ -1043,8 +1047,8 @@ USE_FEATURE_GREP_CONTEXT("ABC") \ "] PATTERN [FILEs...]" #define grep_full_usage \ - "Search for PATTERN in each FILE or standard input.\n\n" \ - "Options:\n" \ + "Search for PATTERN in each FILE or standard input" \ + "\n\nOptions:\n" \ " -H prefix output lines with filename where match was found\n" \ " -h suppress the prefixing filename on output\n" \ " -r recurse subdirectories\n" \ @@ -1078,8 +1082,8 @@ #define gunzip_trivial_usage \ "[OPTION]... FILE" #define gunzip_full_usage \ - "Uncompress FILE (or standard input if FILE is '-').\n\n" \ - "Options:\n" \ + "Uncompress FILE (or standard input if FILE is '-')" \ + "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force read when source is a terminal\n" \ " -t Test compressed file integrity" @@ -1094,8 +1098,8 @@ "[OPTION]... [FILE]..." #define gzip_full_usage \ "Compress FILE(s) with maximum compression.\n" \ - "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \ - "Options:\n" \ + "When FILE is '-' or unspecified, reads standard input. Implies -c." \ + "\n\nOptions:\n" \ " -c Write output to standard output instead of FILE.gz\n" \ " -d Decompress\n" \ " -f Force write when destination is a terminal" @@ -1109,8 +1113,8 @@ #define halt_trivial_usage \ "[-d<delay>] [-n<nosync>] [-f<force>]" #define halt_full_usage \ - "Halt the system.\n" \ - "Options:\n" \ + "Halt the system" \ + "\n\nOptions:\n" \ " -d delay interval for halting\n" \ " -n no call to sync()\n" \ " -f force halt (don't go through init)" @@ -1119,62 +1123,62 @@ "[options] [device] .." #define hdparm_full_usage \ USE_FEATURE_HDPARM_GET_IDENTITY( \ - " If no device name is specified try to read from stdin.\n") \ - "\nOptions:\n" \ - " -a get/set fs readahead\n" \ - " -A set drive read-lookahead flag (0/1)\n" \ - " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ - " -B set Advanced Power Management setting (1-255)\n" \ - " -c get/set IDE 32-bit IO setting\n" \ - " -C check IDE power mode status\n" \ + "If no device name is specified try to read from stdin.\n\n") \ + "Options:\n" \ + " -a get/set fs readahead\n" \ + " -A set drive read-lookahead flag (0/1)\n" \ + " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ + " -B set Advanced Power Management setting (1-255)\n" \ + " -c get/set IDE 32-bit IO setting\n" \ + " -C check IDE power mode status\n" \ USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ - " -d get/set using_dma flag\n") \ - " -D enable/disable drive defect-mgmt\n" \ - " -f flush buffer cache for device on exit\n" \ - " -g display drive geometry\n" \ - " -h display terse usage information\n" \ + " -d get/set using_dma flag\n") \ + " -D enable/disable drive defect-mgmt\n" \ + " -f flush buffer cache for device on exit\n" \ + " -g display drive geometry\n" \ + " -h display terse usage information\n" \ USE_FEATURE_HDPARM_GET_IDENTITY( \ - " -i display drive identification\n") \ + " -i display drive identification\n") \ USE_FEATURE_HDPARM_GET_IDENTITY( \ - " -I detailed/current information directly from drive\n") \ - " -k get/set keep_settings_over_reset flag (0/1)\n" \ - " -K set drive keep_features_over_reset flag (0/1)\n" \ - " -L set drive doorlock (0/1) (removable harddisks only)\n" \ - " -m get/set multiple sector count\n" \ - " -n get/set ignore-write-errors flag (0/1)\n" \ - " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ - " -P set drive prefetch count\n" \ - " -q change next setting quietly\n" \ - " -Q get/set DMA tagged-queuing depth (if supported)\n" \ - " -r get/set readonly flag (DANGEROUS to set)\n" \ + " -I detailed/current information directly from drive\n") \ + " -k get/set keep_settings_over_reset flag (0/1)\n" \ + " -K set drive keep_features_over_reset flag (0/1)\n" \ + " -L set drive doorlock (0/1) (removable harddisks only)\n" \ + " -m get/set multiple sector count\n" \ + " -n get/set ignore-write-errors flag (0/1)\n" \ + " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ + " -P set drive prefetch count\n" \ + " -q change next setting quietly\n" \ + " -Q get/set DMA tagged-queuing depth (if supported)\n" \ + " -r get/set readonly flag (DANGEROUS to set)\n" \ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ - " -R register an IDE interface (DANGEROUS)\n") \ - " -S set standby (spindown) timeout\n" \ - " -t perform device read timings\n" \ - " -T perform cache read timings\n" \ - " -u get/set unmaskirq flag (0/1)\n" \ + " -R register an IDE interface (DANGEROUS)\n") \ + " -S set standby (spindown) timeout\n" \ + " -t perform device read timings\n" \ + " -T perform cache read timings\n" \ + " -u get/set unmaskirq flag (0/1)\n" \ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ - " -U un-register an IDE interface (DANGEROUS)\n") \ - " -v defaults; same as -mcudkrag for IDE drives\n" \ - " -V display program version and exit immediately\n" \ + " -U un-register an IDE interface (DANGEROUS)\n") \ + " -v defaults; same as -mcudkrag for IDE drives\n" \ + " -V display program version and exit immediately\n" \ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ - " -w perform device reset (DANGEROUS)\n") \ - " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \ + " -w perform device reset (DANGEROUS)\n") \ + " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ - " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \ - " -X set IDE xfer mode (DANGEROUS)\n" \ - " -y put IDE drive in standby mode\n" \ - " -Y put IDE drive to sleep\n" \ - " -Z disable Seagate auto-powersaving mode\n" \ - " -z re-read partition table" + " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \ + " -X set IDE xfer mode (DANGEROUS)\n" \ + " -y put IDE drive in standby mode\n" \ + " -Y put IDE drive to sleep\n" \ + " -Z disable Seagate auto-powersaving mode\n" \ + " -z re-read partition table" #define head_trivial_usage \ "[OPTION]... [FILE]..." #define head_full_usage \ "Print first 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ - "Options:" \ + "file name. With no FILE, or when FILE is -, read standard input" \ + "\n\nOptions:" \ "\n -n NUM Print first NUM lines instead of first 10" \ USE_FEATURE_FANCY_HEAD( \ "\n -c NUM output the first NUM bytes" \ @@ -1190,7 +1194,8 @@ #define hexdump_full_usage \ "The hexdump utility is a filter which displays the specified files,\n" \ "or the standard input, if no files are specified, in a user specified\n" \ - "format\n" \ + "format" \ + "\n\nOptions:\n" \ " -b One-byte octal display\n" \ " -c One-byte character display\n" \ " -C Canonical hex+ASCII, 16 bytes per line\n" \ @@ -1212,8 +1217,8 @@ "[OPTION] {hostname | -F FILE}" #define hostname_full_usage \ "Get or set the hostname or DNS domain name. If a hostname is given\n" \ - "(or FILE with the -F parameter), the host name will be set.\n\n" \ - "Options:\n" \ + "(or FILE with the -F parameter), the host name will be set." \ + "\n\nOptions:\n" \ " -s Short\n" \ " -i Addresses for the hostname\n" \ " -d DNS domain name\n" \ @@ -1233,8 +1238,8 @@ " [-h home]" \ " [-d/-e <string>]" #define httpd_full_usage \ - "Listens for incoming http server requests.\n\n" \ - "Options:\n" \ + "Listens for incoming http server requests" \ + "\n\nOptions:\n" \ " -c FILE Specifies configuration file. (default httpd.conf)\n" \ " -p PORT Server port (default 80)\n" \ " -i Assume that we are started from inetd\n" \ @@ -1252,8 +1257,8 @@ #define hwclock_trivial_usage \ "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" #define hwclock_full_usage \ - "Query and set the hardware clock (RTC)\n\n" \ - "Options:\n" \ + "Query and set the hardware clock (RTC)" \ + "\n\nOptions:\n" \ " -r read hardware clock and print result\n" \ " -s set the system time from the hardware clock\n" \ " -w set the hardware clock to the current system time\n" \ @@ -1263,8 +1268,8 @@ #define id_trivial_usage \ "[OPTIONS]... [USERNAME]" #define id_full_usage \ - "Print information for USERNAME or the current user\n\n" \ - "Options:\n" \ + "Print information for USERNAME or the current user" \ + "\n\nOptions:\n" \ USE_SELINUX( \ " -c prints only the security context\n") \ " -g prints only the group ID\n" \ @@ -1278,8 +1283,8 @@ #define ifconfig_trivial_usage \ USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]" #define ifconfig_full_usage \ - "configure a network interface\n\n" \ - "Options:\n" \ + "Configure a network interface" \ + "\n\nOptions:\n" \ USE_FEATURE_IPV6( \ " [add <address>[/<prefixlen>]]\n") \ USE_FEATURE_IPV6( \ @@ -1298,7 +1303,6 @@ #define ifup_trivial_usage \ "<-ahinv> <ifaces...>" #define ifup_full_usage \ - "ifup <options> <ifaces...>\n\n" \ "Options:\n" \ " -h this help\n" \ " -a de/configure all interfaces automatically\n" \ @@ -1312,7 +1316,6 @@ #define ifdown_trivial_usage \ "<-ahinv> <ifaces...>" #define ifdown_full_usage \ - "ifdown <options> <ifaces...>\n\n" \ "Options:\n" \ " -h this help\n" \ " -a de/configure all interfaces automatically\n" \ @@ -1326,8 +1329,8 @@ #define inetd_trivial_usage \ "[-f] [-q len] [conf]" #define inetd_full_usage \ - "Listens for network connections and launches programs\n\n" \ - "Option:\n" \ + "Listens for network connections and launches programs" \ + "\n\nOptions:\n" \ " -f Run as a foreground progress\n" \ " -q Sets the size of the socket listen queue to\n" \ " the specified value. Default is 128" @@ -1466,8 +1469,8 @@ #define insmod_trivial_usage \ "[OPTION]... MODULE [symbol=value]..." #define insmod_full_usage \ - "Loads the specified kernel modules into the kernel.\n\n" \ - "Options:\n" \ + "Loads the specified kernel modules into the kernel" \ + "\n\nOptions:\n" \ " -f Force module to load into the wrong kernel version\n" \ " -k Make module autoclean-able\n" \ " -v verbose output\n" \ @@ -1481,8 +1484,8 @@ #define install_trivial_usage \ "[-cgmops] [sources] <dest|directory>" #define install_full_usage \ - "Copies files and set attributes\n\n" \ - "Options:\n" \ + "Copies files and set attributes" \ + "\n\nOptions:\n" \ " -c copy the file, default\n" \ " -d create directories\n" \ " -g set group ownership\n" \ @@ -1513,8 +1516,8 @@ #define ipcalc_trivial_usage \ "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]" #define ipcalc_full_usage \ - "Calculate IP network settings from a IP address\n\n" \ - "Options:\n" \ + "Calculate IP network settings from a IP address" \ + "\n\nOptions:\n" \ " -b --broadcast Display calculated broadcast address\n" \ " -n --network Display calculated network address\n" \ " -m --netmask Display default netmask for IP" \ @@ -1592,8 +1595,8 @@ #define kill_trivial_usage \ "[-l] [-signal] process-id [process-id ...]" #define kill_full_usage \ - "Send a signal (default is TERM) to the specified process(es).\n\n" \ - "Options:\n" \ + "Send a signal (default is TERM) to the specified process(es)" \ + "\n\nOptions:\n" \ " -l List all signal names and numbers" #define kill_example_usage \ "$ ps | grep apache\n" \ @@ -1608,8 +1611,8 @@ #define killall_trivial_usage \ "[-l] [-q] [-signal] process-name [process-name ...]" #define killall_full_usage \ - "Send a signal (default is TERM) to the specified process(es).\n\n" \ - "Options:\n" \ + "Send a signal (default is TERM) to the specified process(es)" \ + "\n\nOptions:\n" \ " -l List all signal names and numbers\n" \ " -q Do not complain if no processes were killed" #define killall_example_usage \ @@ -1618,15 +1621,15 @@ #define killall5_trivial_usage \ "[-l] [-signal]" #define killall5_full_usage \ - "Send a signal (default is TERM) to all processes outside current session.\n\n" \ - "Options:\n" \ + "Send a signal (default is TERM) to all processes outside current session" \ + "\n\nOptions:\n" \ " -l List all signal names and numbers\n" \ #define klogd_trivial_usage \ "[-c n] [-n]" #define klogd_full_usage \ - "Kernel logger.\n" \ - "Options:\n" \ + "Kernel logger" \ + "\n\nOptions:\n" \ " -c n Sets the default log level of console messages to n\n" \ " -n Run as a foreground process" @@ -1642,8 +1645,8 @@ "[-EMNmh~?] FILE1 FILE2..." #define less_full_usage \ "View a file or list of files. The position within files can be\n" \ - "changed, and files can be manipulated in various ways with the\n" \ - "following options:\n\n" \ + "changed, and files can be manipulated in various ways" \ + "\n\nOptions:\n" \ " -E Quit once the end of a file is reached\n" \ " -M Display a status line containing the current line numbers\n" \ " and the percentage through the file\n" \ @@ -1664,9 +1667,9 @@ #define ln_trivial_usage \ "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage \ - "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \ - "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \ - "Options:\n" \ + "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ + "You may use '--' to indicate that all following arguments are non-options." \ + "\n\nOptions:\n" \ " -s make symbolic links instead of hard links\n" \ " -f remove existing destination files\n" \ " -n no dereference symlinks - treat like normal file\n" \ @@ -1694,8 +1697,8 @@ #define logger_trivial_usage \ "[OPTION]... [MESSAGE]" #define logger_full_usage \ - "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \ - "Options:\n" \ + "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \ + "\n\nOptions:\n" \ " -s Log to stderr as well as the system log\n" \ " -t TAG Log using the specified tag (defaults to user name)\n" \ " -p PRIORITY Enter the message with the specified priority\n" \ @@ -1706,8 +1709,8 @@ #define login_trivial_usage \ "[OPTION]... [username] [ENV=VAR ...]" #define login_full_usage \ - "Begin a new session on the system\n\n" \ - "Options:\n" \ + "Begin a new session on the system" \ + "\n\nOptions:\n" \ " -f Do not authenticate (user already authenticated)\n" \ " -h Name of the remote host for this login\n" \ " -p Preserve environment" @@ -1723,15 +1726,15 @@ #define logread_trivial_usage \ "[OPTION]..." #define logread_full_usage \ - "Shows the messages from syslogd (using circular buffer).\n\n" \ - "Options:\n" \ + "Shows the messages from syslogd (using circular buffer)" \ + "\n\nOptions:\n" \ " -f output data as the log grows" #define losetup_trivial_usage \ "[-o OFFSET] [-d] LOOPDEVICE [FILE]]" #define losetup_full_usage \ - "(Dis)associate LOOPDEVICE with FILE, or display current associations.\n\n" \ - "Options:\n" \ + "(Dis)associate LOOPDEVICE with FILE, or display current associations" \ + "\n\nOptions:\n" \ " -d Disassociate LOOPDEVICE\n" \ " -o OFFSET Start OFFSET bytes into FILE" #define losetup_notes_usage \ @@ -1752,8 +1755,8 @@ USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ USE_SELINUX("K") "] [filenames...]" #define ls_full_usage \ - "List directory contents\n\n" \ - "Options:" \ + "List directory contents" \ + "\n\nOptions:" \ "\n -1 list files in a single column" \ "\n -A do not list implied . and .." \ "\n -a do not hide entries starting with ." \ @@ -1804,8 +1807,8 @@ #define lsattr_trivial_usage \ "[-Radlv] [files...]" #define lsattr_full_usage \ - "list file attributes on an ext2 fs\n\n" \ - "Options:\n" \ + "List file attributes on an ext2 fs" \ + "\n\nOptions:\n" \ " -R recursively list subdirectories\n" \ " -a do not hide entries starting with .\n" \ " -d list directory entries instead of contents\n" \ @@ -1877,8 +1880,8 @@ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage \ - "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \ - "Options:\n" \ + "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ + "\n\nOptions:\n" \ "With no FILE, or when FILE is -, read standard input." \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ " -c check MD5 sums against given list\n" \ @@ -1931,8 +1934,8 @@ #define mkdir_trivial_usage \ "[OPTION] DIRECTORY..." #define mkdir_full_usage \ - "Create the DIRECTORY(ies) if they do not already exist\n\n" \ - "Options:\n" \ + "Create the DIRECTORY(ies) if they do not already exist" \ + "\n\nOptions:\n" \ " -m set permission mode (as in chmod), not rwxrwxrwx - umask\n" \ " -p no error if existing, make parent directories as needed" #define mkdir_example_usage \ @@ -1977,15 +1980,15 @@ #define mkfifo_trivial_usage \ "[OPTIONS] name" #define mkfifo_full_usage \ - "Creates a named pipe (identical to 'mknod name p')\n\n" \ - "Options:\n" \ + "Creates a named pipe (identical to 'mknod name p')" \ + "\n\nOptions:\n" \ " -m create the pipe using the specified mode (default a=rw)" #define mkfs_minix_trivial_usage \ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage \ - "Make a MINIX filesystem.\n\n" \ - "Options:\n" \ + "Make a MINIX filesystem" \ + "\n\nOptions:\n" \ " -c Check the device for bad blocks\n" \ " -n [14|30] Specify the maximum length of filenames\n" \ " -i INODES Specify the number of inodes for the filesystem\n" \ @@ -1995,10 +1998,10 @@ #define mknod_trivial_usage \ "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage \ - "Create a special file (block, character, or pipe).\n\n" \ - "Options:\n" \ - " -m create the special file using the specified mode (default a=rw)\n\n" \ - "TYPEs include:\n" \ + "Create a special file (block, character, or pipe)" \ + "\n\nOptions:\n" \ + " -m create the special file using the specified mode (default a=rw)" \ + "\n\nTYPEs include:\n" \ " b: Make a block (buffered) device\n" \ " c or u: Make a character (un-buffered) device\n" \ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" @@ -2009,8 +2012,8 @@ #define mkswap_trivial_usage \ "[-c] [-v0|-v1] device [block-count]" #define mkswap_full_usage \ - "Prepare a disk partition to be used as a swap partition.\n\n" \ - "Options:\n" \ + "Prepare a disk partition to be used as a swap partition" \ + "\n\nOptions:\n" \ " -c Check for read-ability\n" \ " -v0 Make version 0 swap [max 128 Megs]\n" \ " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \ @@ -2020,8 +2023,8 @@ "[-dq] TEMPLATE" #define mktemp_full_usage \ "Creates a temporary file with its name based on TEMPLATE.\n" \ - "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \ - "Options:\n" \ + "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \ + "\n\nOptions:\n" \ " -d Make a directory instead of a file\n" \ " -q Fail silently if an error occurs" #define mktemp_example_usage \ @@ -2110,8 +2113,8 @@ #define mount_trivial_usage \ "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage \ - "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \ - "Flags:\n" \ + "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \ + "\n\nOptions:\n" \ " -a: Mount all filesystems in fstab\n" \ USE_FEATURE_MTAB_SUPPORT( \ " -f: \"Fake\" Add entry to mount table but don't mount it\n" \ @@ -2158,8 +2161,8 @@ #define mountpoint_trivial_usage \ "[-q] <[-d] DIR | -x DEVICE>" #define mountpoint_full_usage \ - "mountpoint checks if the directory is a mountpoint\n\n" \ - "Options:\n" \ + "mountpoint checks if the directory is a mountpoint" \ + "\n\nOptions:\n" \ " -q Be more quiet\n" \ " -d Print major/minor device number of the filesystem\n" \ " -x Print major/minor device number of the blockdevice" @@ -2183,8 +2186,8 @@ "[OPTION]... SOURCE DEST\n" \ "or: mv [OPTION]... SOURCE... DIRECTORY" #define mv_full_usage \ - "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \ - "Options:\n" \ + "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \ + "\n\nOptions:\n" \ " -f don't prompt before overwriting\n" \ " -i interactive, prompt before overwrite" #define mv_example_usage \ @@ -2193,8 +2196,8 @@ #define nameif_trivial_usage \ "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage \ - "Nameif renames network interface while it in the down state.\n\n" \ - "Options:\n" \ + "Renames network interface while it in the down state" \ + "\n\nOptions:\n" \ " -c FILE Use configuration file (default is /etc/mactab)\n" \ " -s Use syslog (LOCAL0 facility)\n" \ " IFNAME MACADDR new_interface_name interface_mac_address" @@ -2230,10 +2233,10 @@ #define nc_notes_usage "" \ USE_NC_EXTRA( \ - "To use netcat as a terminal emulator on a serial port:\n\n" \ - "$ stty 115200 -F /dev/ttyS0\n" \ - "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ - ) "" + "To use netcat as a terminal emulator on a serial port:\n\n" \ + "$ stty 115200 -F /dev/ttyS0\n" \ + "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ + ) #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ @@ -2248,8 +2251,8 @@ #define netstat_trivial_usage \ "[-laenrtuwx]" #define netstat_full_usage \ - "Netstat displays Linux networking information.\n\n" \ - "Options:\n" \ + "Displays Linux networking information" \ + "\n\nOptions:\n" \ " -l display listening server sockets\n" \ " -a display all sockets (default: connected)\n" \ " -e display other/more information\n" \ @@ -2263,8 +2266,8 @@ #define nice_trivial_usage \ "[-n ADJUST] [COMMAND [ARG] ...]" #define nice_full_usage \ - "Nice runs a program with modified scheduling priority.\n\n" \ - "Options:\n" \ + "Runs a program with modified scheduling priority" \ + "\n\nOptions:\n" \ " -n ADJUST Adjust the scheduling priority by ADJUST" #define nmeter_trivial_usage \ @@ -2328,8 +2331,8 @@ "[OPTION] [name]" #define passwd_full_usage \ "Change a user password. If no name is specified,\n" \ - "changes the password for the current user.\n" \ - "Options:\n" \ + "changes the password for the current user." \ + "\n\nOptions:\n" \ " -a Define which algorithm shall be used for the password\n" \ " (Choices: des, md5)\n" /* ", sha1)" */ \ " -d Delete the password for the specified user account\n" \ @@ -2348,7 +2351,7 @@ #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) #define USAGE_PIDOF "Options:" #else -#define USAGE_PIDOF "\n This version of pidof accepts no options." +#define USAGE_PIDOF "\nThis version of pidof accepts no options." #endif #define pidof_trivial_usage \ @@ -2379,8 +2382,8 @@ #define ping_trivial_usage \ "[OPTION]... host" #define ping_full_usage \ - "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ - "Options:\n" \ + "Send ICMP ECHO_REQUEST packets to network hosts" \ + "\n\nOptions:\n" \ " -c CNT Send only CNT pings\n" \ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ " -I IP Use IP as source address\n" \ @@ -2403,8 +2406,8 @@ #define ping6_trivial_usage \ "[OPTION]... host" #define ping6_full_usage \ - "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ - "Options:\n" \ + "Send ICMP ECHO_REQUEST packets to network hosts" \ + "\n\nOptions:\n" \ " -c CNT Send only CNT pings\n" \ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ " -q Quiet mode, only displays output at start\n" \ @@ -2428,8 +2431,8 @@ #define poweroff_trivial_usage \ "[-d<delay>] [-n<nosync>] [-f<force>]" #define poweroff_full_usage \ - "Halt and shut off power.\n" \ - "Options:\n" \ + "Halt and shut off power" \ + "\n\nOptions:\n" \ " -d delay interval for halting\n" \ " -n no call to sync()\n" \ " -f force power off (don't go through init)" @@ -2455,8 +2458,8 @@ #define ps_trivial_usage \ "" #define ps_full_usage \ - "Report process status\n" \ - "\nOptions:" \ + "Report process status" \ + "\n\nOptions:" \ "\n -o col1,col2=header Select columns for display" \ #else /* !ENABLE_DESKTOP */ @@ -2511,8 +2514,8 @@ #define rdate_trivial_usage \ "[-sp] HOST" #define rdate_full_usage \ - "Get and possibly set the system date and time from a remote HOST.\n\n" \ - "Options:\n" \ + "Get and possibly set the system date and time from a remote HOST" \ + "\n\nOptions:\n" \ " -s Set the system date and time (default)\n" \ " -p Print the date and time" @@ -2553,8 +2556,8 @@ #define reboot_trivial_usage \ "[-d<delay>] [-n<nosync>] [-f<force>]" #define reboot_full_usage \ - "Reboot the system.\n" \ - "Options:\n" \ + "Reboot the system" \ + "\n\nOptions:\n" \ " -d delay interval for rebooting\n" \ " -n no call to sync()\n" \ " -f force reboot (don't go through init)" @@ -2562,8 +2565,8 @@ #define renice_trivial_usage \ "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]" #define renice_full_usage \ - "Changes priority of running processes.\n\n" \ - "Options:\n" \ + "Changes priority of running processes" \ + "\n\nOptions:\n" \ " -n adjusts current nice value (smaller is faster)\n" \ " -p process id(s) (default)\n" \ " -g process group id(s)\n" \ @@ -2583,8 +2586,8 @@ "[OPTION]... FILE..." #define rm_full_usage \ "Remove (unlink) the FILE(s). You may use '--' to\n" \ - "indicate that all following arguments are non-options.\n\n" \ - "Options:\n" \ + "indicate that all following arguments are non-options." \ + "\n\nOptions:\n" \ " -i always prompt before removing each destination\n" \ " -f remove existing destinations, never prompt\n" \ " -r,-R remove the contents of directories recursively" @@ -2601,8 +2604,8 @@ #define rmmod_trivial_usage \ "[OPTION]... [MODULE]..." #define rmmod_full_usage \ - "Unloads the specified kernel modules from the kernel.\n\n" \ - "Options:\n" \ + "Unloads the specified kernel modules from the kernel" \ + "\n\nOptions:\n" \ " -a Remove all unused modules (recursively)" #define rmmod_example_usage \ "$ rmmod tulip\n" @@ -2610,8 +2613,8 @@ #define route_trivial_usage \ "[{add|del|delete}]" #define route_full_usage \ - "Edit the kernel's routing tables.\n\n" \ - "Options:\n" \ + "Edit the kernel's routing tables" \ + "\n\nOptions:\n" \ " -n Dont resolve names\n" \ " -e Display other/more information\n" \ " -A inet" USE_FEATURE_IPV6("{6}") " Select address family" @@ -2621,13 +2624,13 @@ #define rpm_full_usage \ "Manipulates RPM packages" \ "\n\nOptions:" \ - "\n -i Install package" \ - "\n -q Query package" \ - "\n -p Query uninstalled package" \ - "\n -i Show information" \ - "\n -l List contents" \ - "\n -d List documents" \ - "\n -c List config files" + "\n -i Install package" \ + "\n -q Query package" \ + "\n -p Query uninstalled package" \ + "\n -i Show information" \ + "\n -l List contents" \ + "\n -d List documents" \ + "\n -c List config files" #define rpm2cpio_trivial_usage \ "package.rpm" @@ -2637,8 +2640,8 @@ #define run_parts_trivial_usage \ "[-t] [-a ARG] [-u MASK] DIRECTORY" #define run_parts_full_usage \ - "Run a bunch of scripts in a directory.\n\n" \ - "Options:\n" \ + "Run a bunch of scripts in a directory" \ + "\n\nOptions:\n" \ " -t Prints what would be run, but does not actually run anything\n" \ " -a ARG Pass ARG as an argument for every program invoked\n" \ " -u MASK Set the umask to MASK before executing every program" @@ -2703,8 +2706,8 @@ #define setconsole_trivial_usage \ "[-r|--reset] [DEVICE]" #define setconsole_full_usage \ - "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \ - "Options:\n" \ + "Redirects system console output to DEVICE (default: /dev/tty)" \ + "\n\nOptions:\n" \ " -r Reset output to /dev/console." #define setkeycodes_trivial_usage \ @@ -2751,10 +2754,10 @@ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") #define sha1sum_full_usage \ - "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \ - "Options:\n" \ + "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \ "With no FILE, or when FILE is -, read standard input." \ - USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ + "\n\nOptions:\n" \ + USE_FEATURE_MD5_SHA1_SUM_CHECK( \ " -c check SHA1 sums against given list\n" \ "\nThe following two options are useful only when verifying checksums:\n" \ " -s don't output anything, status code shows success\n" \ @@ -2779,8 +2782,8 @@ USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \ "] [FILE]..." #define sort_full_usage \ - "Sorts lines of text in the specified files\n\n" \ - "Options:\n" \ + "Sorts lines of text in the specified files" \ + "\n\nOptions:\n" \ USE_FEATURE_SORT_BIG( \ " -b ignore leading blanks\n" \ " -c check whether input is sorted\n" \ @@ -2846,8 +2849,8 @@ #define stat_trivial_usage \ "[OPTION] FILE..." #define stat_full_usage \ - "display file (default) or filesystem status.\n\n" \ - "Options:\n" \ + "Display file (default) or filesystem status" \ + "\n\nOptions:\n" \ USE_FEATURE_STAT_FORMAT( \ " -c fmt use the specified format\n") \ " -f display filesystem status\n" \ @@ -2920,24 +2923,24 @@ #define su_trivial_usage \ "[OPTION]... [-] [username]" #define su_full_usage \ - "Change user id or become root.\n" \ - "Options:\n" \ - " -p, -m Preserve environment" \ + "Change user id or become root" \ + "\n\nOptions:" \ + "\n -p, -m Preserve environment" \ "\n -c Command to pass to 'sh -c'" \ "\n -s Shell to use instead of default shell" #define sulogin_trivial_usage \ "[OPTION]... [tty-device]" #define sulogin_full_usage \ - "Single user login\n" \ - "Options:\n" \ - " -t Timeout" + "Single user login" \ + "\n\nOptions:" \ + "\n -t Timeout" #define sum_trivial_usage \ "[rs] [files...]" #define sum_full_usage \ - "checksum and count the blocks in a file\n\n" \ - "Options:\n" \ + "Checksum and count the blocks in a file" \ + "\n\nOptions:\n" \ " -r use BSD sum algorithm (1K blocks)\n" \ " -s use System V sum algorithm (512byte blocks)" @@ -2957,23 +2960,23 @@ #define swapoff_trivial_usage \ "[-a] [DEVICE]" #define swapoff_full_usage \ - "Stop swapping virtual memory pages on DEVICE.\n\n" \ - "Options:\n" \ + "Stop swapping virtual memory pages on DEVICE" \ + "\n\nOptions:\n" \ " -a Stop swapping on all swap devices" #define swapon_trivial_usage \ "[-a] [DEVICE]" #define swapon_full_usage \ - "Start swapping virtual memory pages on DEVICE.\n\n" \ - "Options:\n" \ + "Start swapping virtual memory pages on DEVICE" \ + "\n\nOptions:\n" \ " -a Start swapping on all swap devices" #define switch_root_trivial_usage \ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" #define switch_root_full_usage \ "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ - "and exec NEW_INIT.\n\n" \ - "Options:\n" \ + "and exec NEW_INIT" \ + "\n\nOptions:\n" \ " -c Redirect console to device on new root" #define sync_trivial_usage \ @@ -2984,8 +2987,8 @@ #define sysctl_trivial_usage \ "[OPTIONS]... [VALUE]..." #define sysctl_full_usage \ - "configure kernel parameters at runtime\n\n" \ - "Options:\n" \ + "Configure kernel parameters at runtime" \ + "\n\nOptions:\n" \ " -n Use this option to disable printing of the key name when printing values\n" \ " -w Use this option when you want to change a sysctl setting\n" \ " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \ @@ -3002,13 +3005,13 @@ "[OPTION]..." #define syslogd_full_usage \ "Linux system and kernel logging utility.\n" \ - "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \ - "Options:\n" \ - " -m MIN Minutes between MARK lines (default=20, 0=off)\n" \ - " -n Run as a foreground process\n" \ - " -O FILE Use an alternate log file (default=/var/log/messages)\n" \ - " -l n Sets the local log level of messages to n\n" \ - " -S Make logging output smaller" \ + "Note that this version of syslogd ignores /etc/syslog.conf." \ + "\n\nOptions:" \ + "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \ + "\n -n Run as a foreground process" \ + "\n -O FILE Use an alternate log file (default=/var/log/messages)" \ + "\n -l n Sets the local log level of messages to n" \ + "\n -S Make logging output smaller" \ USE_FEATURE_ROTATE_LOGFILE( \ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ @@ -3026,16 +3029,17 @@ #define tail_full_usage \ "Print last 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ - "Options:\n" \ + "file name. With no FILE, or when FILE is -, read standard input." \ + "\n\nOptions:" \ USE_FEATURE_FANCY_TAIL( \ - " -c N[kbm] output the last N bytes\n") \ - " -n N[kbm] print last N lines instead of last 10\n" \ - " -f output data as the file grows" \ + "\n -c N[kbm] output the last N bytes") \ + "\n -n N[kbm] print last N lines instead of last 10" \ + "\n -f output data as the file grows" \ USE_FEATURE_FANCY_TAIL( \ - "\n -q never output headers giving file names\n" \ - " -s SEC wait SEC seconds between reads with -f\n" \ - " -v always output headers giving file names\n\n" \ + "\n -q never output headers giving file names" \ + "\n -s SEC wait SEC seconds between reads with -f" \ + "\n -v always output headers giving file names" \ + "\n\n" \ "If the first character of N (bytes or lines) is a '+', output begins with\n" \ "the Nth item from the start of each file, otherwise, print the last N items\n" \ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) @@ -3050,8 +3054,8 @@ USE_FEATURE_TAR_FROM("[-X FILE] ") \ "[-f TARFILE] [-C DIR] [FILE(s)] ..." #define tar_full_usage \ - "Create, extract, or list files from a tar file.\n\n" \ - "Options:\n" \ + "Create, extract, or list files from a tar file" \ + "\n\nOptions:\n" \ USE_FEATURE_TAR_CREATE( \ " c create\n") \ " x extract\n" \ @@ -3078,27 +3082,27 @@ "$ tar -cf /tmp/tarball.tar /usr/local\n" #define taskset_trivial_usage \ - "[OPTIONS] [mask] [pid | command [arg]...]" + "[OPTIONS] [mask] [pid | command [arg]...]" #define taskset_full_usage \ - "Set or get CPU affinity.\n\n" \ - "Options:\n" \ - " -p operate on an existing PID" + "Set or get CPU affinity" \ + "\n\nOptions:\n" \ + " -p operate on an existing PID" #define taskset_example_usage \ - "$ taskset 0x7 ./dgemm_test&\n" \ - "$ taskset -p 0x1 $!\n" \ - "pid 4790's current affinity mask: 7\n" \ - "pid 4790's new affinity mask: 1\n" \ - "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ - "pid 6671's current affinity mask: 1\n" \ - "pid 6671's new affinity mask: 1\n" \ - "$ taskset -p 1\n" - "pid 1's current affinity mask: 3\n" + "$ taskset 0x7 ./dgemm_test&\n" \ + "$ taskset -p 0x1 $!\n" \ + "pid 4790's current affinity mask: 7\n" \ + "pid 4790's new affinity mask: 1\n" \ + "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ + "pid 6671's current affinity mask: 1\n" \ + "pid 6671's new affinity mask: 1\n" \ + "$ taskset -p 1\n" \ + "pid 1's current affinity mask: 3\n" #define tee_trivial_usage \ "[OPTION]... [FILE]..." #define tee_full_usage \ - "Copy standard input to each FILE, and also to standard output.\n\n" \ - "Options:\n" \ + "Copy standard input to each FILE, and also to standard output" \ + "\n\nOptions:\n" \ " -a append to the given FILEs, do not overwrite\n" \ " -i ignore interrupt signals (SIGINT)" #define tee_example_usage \ @@ -3111,8 +3115,8 @@ "[-a] [-l USER] HOST [PORT]" #define telnet_full_usage \ "Telnet is used to establish interactive communication with another\n" \ - "computer over a network using the TELNET protocol.\n\n" \ - "Options:\n" \ + "computer over a network using the TELNET protocol" \ + "\n\nOptions:\n" \ " -a Attempt an automatic login with the USER variable\n" \ " -l USER Attempt an automatic login with the USER argument\n" \ " HOST The official name, alias or the IP address of the\n" \ @@ -3131,8 +3135,8 @@ #define telnetd_trivial_usage \ "[OPTION]" #define telnetd_full_usage \ - "Telnetd listens for incoming TELNET connections on PORT.\n" \ - "Options:\n" \ + "Telnetd listens for incoming TELNET connections on PORT" \ + "\n\nOptions:\n" \ " -p PORT listen for connections on PORT (default 23)\n" \ " -l LOGIN exec LOGIN on connect\n" \ " -f issue_file Display issue_file instead of /etc/issue\n" \ @@ -3142,10 +3146,17 @@ #define telnetd_trivial_usage \ "[OPTION]" #define telnetd_full_usage \ - "Telnetd uses incoming TELNET connections via inetd.\n" \ - "Options:\n" \ - " -l LOGIN exec LOGIN on connect\n" \ - " -f issue_file Display issue_file instead of /etc/issue" + "Telnetd uses incoming TELNET connections" \ + SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \ + "\n\nOptions:" \ + "\n -l LOGIN exec LOGIN on connect" \ + "\n -f issue_file Display issue_file instead of /etc/issue" \ + USE_FEATURE_TELNETD_STANDALONE( \ + "\n -p PORT port to listen to" \ + "\n -b ADDR address to bind to" \ + "\n -F stay in foreground" \ + "\n -i inetd subservice" \ + ) #endif #define test_trivial_usage \ @@ -3170,10 +3181,10 @@ #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" #define tftp_full_usage \ - "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \ - "Options:\n" \ - " -l FILE Local FILE\n" \ - " -r FILE Remote FILE" \ + "Transfers a file from/to a tftp server using \"octet\" mode" \ + "\n\nOptions:" \ + "\n -l FILE Local FILE" \ + "\n -r FILE Remote FILE" \ USE_FEATURE_TFTP_GET( \ "\n -g Get file" \ ) \ @@ -3187,8 +3198,8 @@ "[OPTION]... COMMAND [ARGS...]" #define time_full_usage \ "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ - "COMMAND's resource usage information is displayed\n\n" \ - "Options:\n" \ + "COMMAND's resource usage information is displayed." \ + "\n\nOptions:\n" \ " -v Displays verbose resource usage information" #define top_trivial_usage \ @@ -3201,8 +3212,8 @@ #define touch_trivial_usage \ "[-c] FILE [FILE ...]" #define touch_full_usage \ - "Update the last-modified date on the given FILE[s].\n\n" \ - "Options:\n" \ + "Update the last-modified date on the given FILE[s]" \ + "\n\nOptions:\n" \ " -c Do not create any files" #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ @@ -3215,8 +3226,8 @@ "[-cds] STRING1 [STRING2]" #define tr_full_usage \ "Translate, squeeze, and/or delete characters from\n" \ - "standard input, writing to standard output.\n\n" \ - "Options:\n" \ + "standard input, writing to standard output" \ + "\n\nOptions:\n" \ " -c take complement of STRING1\n" \ " -d delete input characters coded STRING1\n" \ " -s squeeze multiple output characters of STRING2 into one character" @@ -3229,8 +3240,8 @@ " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ " [-z pausemsecs] host [data size]" #define traceroute_full_usage \ - "trace the route ip packets follow going to \"host\"\n" \ - "Options:\n" \ + "Trace the route ip packets follow going to \"host\"" \ + "\n\nOptions:\n" \ " -F Set the don't fragment bit\n" \ " -I Use ICMP ECHO instead of UDP datagrams\n" \ " -l Display the ttl value of the returned packet\n" \ @@ -3263,8 +3274,8 @@ #define tty_trivial_usage \ "" #define tty_full_usage \ - "Print the file name of the terminal connected to standard input.\n\n" \ - "Options:\n" \ + "Print the file name of the terminal connected to standard input" \ + "\n\nOptions:\n" \ " -s print nothing, only return an exit status" #define tty_example_usage \ "$ tty\n" \ @@ -3324,8 +3335,8 @@ #define uname_trivial_usage \ "[OPTION]..." #define uname_full_usage \ - "Print certain system information. With no OPTION, same as -s.\n\n" \ - "Options:\n" \ + "Print certain system information. With no OPTION, same as -s." \ + "\n\nOptions:\n" \ " -a print all information\n" \ " -m the machine (hardware) type\n" \ " -n print the machine's network node hostname\n" \ @@ -3340,8 +3351,8 @@ #define uncompress_trivial_usage \ "[-c] [-f] [ name ... ]" #define uncompress_full_usage \ - "Uncompress .Z file[s]\n" \ - "Options:\n" \ + "Uncompress .Z file[s]" \ + "\n\nOptions:\n" \ " -c extract to stdout\n" \ " -f force overwrite an existing file" @@ -3349,8 +3360,8 @@ "[-fscdu]... [INPUT [OUTPUT]]" #define uniq_full_usage \ "Discard all but one of successive identical lines from INPUT\n" \ - "(or standard input), writing to OUTPUT (or standard output).\n\n" \ - "Options:\n" \ + "(or standard input), writing to OUTPUT (or standard output)" \ + "\n\nOptions:\n" \ " -c prefix lines by the number of occurrences\n" \ " -d only print duplicate lines\n" \ " -u only print unique lines\n" \ @@ -3367,16 +3378,16 @@ #define unix2dos_full_usage \ "Converts FILE from unix format to dos format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ - "When no file is given, uses stdin for input and stdout for output.\n" \ - "Options:\n" \ + "When no file is given, uses stdin for input and stdout for output." \ + "\n\nOptions:\n" \ " -u output will be in UNIX format\n" \ " -d output will be in DOS format" #define unzip_trivial_usage \ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage \ - "Extracts files from ZIP archives.\n\n" \ - "Options:\n" \ + "Extracts files from ZIP archives" \ + "\n\nOptions:\n" \ " -l list archive contents (short form)\n" \ " -n never overwrite existing files (default)\n" \ " -o overwrite files without prompting\n" \ @@ -3404,8 +3415,8 @@ #define uudecode_trivial_usage \ "[FILE]..." #define uudecode_full_usage \ - "Uudecode a file that is uuencoded.\n\n" \ - "Options:\n" \ + "Uudecode a file" \ + "\n\nOptions:\n" \ " -o FILE direct output to FILE" #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ @@ -3415,8 +3426,8 @@ #define uuencode_trivial_usage \ "[OPTION] [INFILE] REMOTEFILE" #define uuencode_full_usage \ - "Uuencode a file.\n\n" \ - "Options:\n" \ + "Uuencode a file" \ + "\n\nOptions:\n" \ " -m use base64 encoding per RFC1521" #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ @@ -3428,8 +3439,8 @@ #define vconfig_trivial_usage \ "COMMAND [OPTIONS] ..." #define vconfig_full_usage \ - "vconfig lets you create and remove virtual ethernet devices.\n\n" \ - "Options:\n" \ + "Create and remove virtual ethernet devices" \ + "\n\nOptions:\n" \ " add [interface-name] [vlan_id]\n" \ " rem [vlan-name]\n" \ " set_flag [interface-name] [flag-num] [0 | 1]\n" \ @@ -3440,23 +3451,23 @@ #define vi_trivial_usage \ "[OPTION] [FILE]..." #define vi_full_usage \ - "edit FILE.\n\n" \ - "Options:\n" \ + "Edit FILE" \ + "\n\nOptions:\n" \ " -R Read-only- do not write to the file" #define vlock_trivial_usage \ "[OPTIONS]" #define vlock_full_usage \ - "Lock a virtual terminal. A password is required to unlock\n" \ - "Options:\n" \ + "Lock a virtual terminal. A password is required to unlock." \ + "\n\nOptions:\n" \ " -a Lock all VTs" #define watch_trivial_usage \ "[-n <seconds>] [-t] COMMAND..." #define watch_full_usage \ - "Executes a program periodically\n\n" \ - "Options:\n" \ - " -n Loop period in seconds - default is 2\n" + "Executes a program periodically" \ + "\n\nOptions:\n" \ + " -n Loop period in seconds - default is 2\n" \ " -t Don't print header" #define watch_example_usage \ "$ watch date\n" \ @@ -3467,8 +3478,8 @@ #define watchdog_trivial_usage \ "[-t <seconds>] [-F] DEV" #define watchdog_full_usage \ - "Periodically write to watchdog device DEV.\n" \ - "Options:\n" \ + "Periodically write to watchdog device DEV" \ + "\n\nOptions:\n" \ " -t Timer period in seconds - default is 30\n" \ " -F Stay in the foreground and don't fork" @@ -3476,8 +3487,8 @@ "[OPTION]... [FILE]..." #define wc_full_usage \ "Print line, word, and byte counts for each FILE, and a total line if\n" \ - "more than one FILE is specified. With no FILE, read standard input.\n\n" \ - "Options:\n" \ + "more than one FILE is specified. With no FILE, read standard input." \ + "\n\nOptions:\n" \ " -c print the byte counts\n" \ " -l print the newline counts\n" \ " -L print the length of the longest line\n" \ @@ -3491,8 +3502,8 @@ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ " [-U|--user-agent agent] url" #define wget_full_usage \ - "wget retrieves files via HTTP or FTP\n\n" \ - "Options:\n" \ + "Retrieve files via HTTP or FTP" \ + "\n\nOptions:\n" \ " -c continue retrieval of aborted transfers\n" \ " -q quiet mode - do not print\n" \ " -P Set directory prefix to DIR\n" \ @@ -3521,8 +3532,8 @@ #define xargs_trivial_usage \ "[OPTIONS] [COMMAND] [ARGS...]" #define xargs_full_usage \ - "Executes COMMAND on every item given by standard input.\n\n" \ - "Options:\n" \ + "Executes COMMAND on every item given by standard input" \ + "\n\nOptions:\n" \ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ " -p Prompt the user about whether to run each command\n") \ " -r Do not run command for empty read lines\n" \ @@ -3548,8 +3559,8 @@ #define zcip_trivial_usage \ "[OPTIONS] ifname script" #define zcip_full_usage \ - "zcip manages a ZeroConf IPv4 link-local address.\n" \ - "Options:\n" \ + "Manage a ZeroConf IPv4 link-local address" \ + "\n\nOptions:\n" \ " -f foreground mode\n" \ " -q quit after address (no daemon)\n" \ " -r 169.254.x.x request this address first\n" \ |