config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

66 files changed, 355 insertions, 355 deletions

diff --git a/util-linux/Config.src b/util-linux/Config.src
index 0971d71..68fcc26 100644
--- a/util-linux/Config.src
+++ b/util-linux/Config.src
@@ -15,29 +15,29 @@ config FEATURE_MOUNT_LOOP
 	default y
 	depends on MOUNT || UMOUNT
 	help
-	  Enabling this feature allows automatic mounting of files (containing
-	  filesystem images) via the linux kernel's loopback devices.
-	  The mount command will detect you are trying to mount a file instead
-	  of a block device, and transparently associate the file with a
-	  loopback device. The umount command will also free that loopback
-	  device.
+	Enabling this feature allows automatic mounting of files (containing
+	filesystem images) via the linux kernel's loopback devices.
+	The mount command will detect you are trying to mount a file instead
+	of a block device, and transparently associate the file with a
+	loopback device. The umount command will also free that loopback
+	device.
 
-	  You can still use the 'losetup' utility (to manually associate files
-	  with loop devices) if you need to do something advanced, such as
-	  specify an offset or cryptographic options to the loopback device.
-	  (If you don't want umount to free the loop device, use "umount -D".)
+	You can still use the 'losetup' utility (to manually associate files
+	with loop devices) if you need to do something advanced, such as
+	specify an offset or cryptographic options to the loopback device.
+	(If you don't want umount to free the loop device, use "umount -D".)
 
 config FEATURE_MOUNT_LOOP_CREATE
 	bool "Create new loopback devices if needed"
 	default y
 	depends on FEATURE_MOUNT_LOOP
 	help
-	  Linux kernels >= 2.6.24 support unlimited loopback devices. They are
-	  allocated for use when trying to use a loop device. The loop device
-	  must however exist.
+	Linux kernels >= 2.6.24 support unlimited loopback devices. They are
+	allocated for use when trying to use a loop device. The loop device
+	must however exist.
 
-	  This feature lets mount to try to create next /dev/loopN device
-	  if it does not find a free one.
+	This feature lets mount to try to create next /dev/loopN device
+	if it does not find a free one.
 
 config FEATURE_MTAB_SUPPORT
 	bool "Support old /etc/mtab file"
@@ -45,23 +45,23 @@ config FEATURE_MTAB_SUPPORT
 	depends on MOUNT || UMOUNT
 	select FEATURE_MOUNT_FAKE
 	help
-	  Historically, Unix systems kept track of the currently mounted
-	  partitions in the file "/etc/mtab". These days, the kernel exports
-	  the list of currently mounted partitions in "/proc/mounts", rendering
-	  the old mtab file obsolete. (In modern systems, /etc/mtab should be
-	  a symlink to /proc/mounts.)
+	Historically, Unix systems kept track of the currently mounted
+	partitions in the file "/etc/mtab". These days, the kernel exports
+	the list of currently mounted partitions in "/proc/mounts", rendering
+	the old mtab file obsolete. (In modern systems, /etc/mtab should be
+	a symlink to /proc/mounts.)
 
-	  The only reason to have mount maintain an /etc/mtab file itself is if
-	  your stripped-down embedded system does not have a /proc directory.
-	  If you must use this, keep in mind it's inherently brittle (for
-	  example a mount under chroot won't update it), can't handle modern
-	  features like separate per-process filesystem namespaces, requires
-	  that your /etc directory be writable, tends to get easily confused
-	  by --bind or --move mounts, won't update if you rename a directory
-	  that contains a mount point, and so on. (In brief: avoid.)
+	The only reason to have mount maintain an /etc/mtab file itself is if
+	your stripped-down embedded system does not have a /proc directory.
+	If you must use this, keep in mind it's inherently brittle (for
+	example a mount under chroot won't update it), can't handle modern
+	features like separate per-process filesystem namespaces, requires
+	that your /etc directory be writable, tends to get easily confused
+	by --bind or --move mounts, won't update if you rename a directory
+	that contains a mount point, and so on. (In brief: avoid.)
 
-	  About the only reason to use this is if you've removed /proc from
-	  your kernel.
+	About the only reason to use this is if you've removed /proc from
+	your kernel.
 
 source util-linux/volume_id/Config.in
 
diff --git a/util-linux/acpid.c b/util-linux/acpid.c
index 7abea14..3c38117 100644
--- a/util-linux/acpid.c
+++ b/util-linux/acpid.c
@@ -11,23 +11,23 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  acpid listens to ACPI events coming either in textual form from
-//config:	  /proc/acpi/event (though it is marked deprecated it is still widely
-//config:	  used and _is_ a standard) or in binary form from specified evdevs
-//config:	  (just use /dev/input/event*).
+//config:	acpid listens to ACPI events coming either in textual form from
+//config:	/proc/acpi/event (though it is marked deprecated it is still widely
+//config:	used and _is_ a standard) or in binary form from specified evdevs
+//config:	(just use /dev/input/event*).
 //config:
-//config:	  It parses the event to retrieve ACTION and a possible PARAMETER.
-//config:	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-//config:	  (if the resulting path is a directory) or directly as an executable.
+//config:	It parses the event to retrieve ACTION and a possible PARAMETER.
+//config:	It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+//config:	(if the resulting path is a directory) or directly as an executable.
 //config:
-//config:	  N.B. acpid relies on run-parts so have the latter installed.
+//config:	N.B. acpid relies on run-parts so have the latter installed.
 //config:
 //config:config FEATURE_ACPID_COMPAT
 //config:	bool "Accept and ignore redundant options"
 //config:	default y
 //config:	depends on ACPID
 //config:	help
-//config:	  Accept and ignore compatibility options -g -m -s -S -v.
+//config:	Accept and ignore compatibility options -g -m -s -S -v.
 
 //applet:IF_ACPID(APPLET(acpid, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/blkdiscard.c b/util-linux/blkdiscard.c
index 6900629..8f6a4ab 100644
--- a/util-linux/blkdiscard.c
+++ b/util-linux/blkdiscard.c
@@ -9,7 +9,7 @@
 //config:	bool "blkdiscard (5.3 kb)"
 //config:	default y
 //config:	help
-//config:	  blkdiscard discards sectors on a given device.
+//config:	blkdiscard discards sectors on a given device.
 
 //kbuild:lib-$(CONFIG_BLKDISCARD) += blkdiscard.o
 //applet:IF_BLKDISCARD(APPLET(blkdiscard, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/util-linux/blkid.c b/util-linux/blkid.c
index 08fa079..f353cf2 100644
--- a/util-linux/blkid.c
+++ b/util-linux/blkid.c
@@ -12,16 +12,16 @@
 //config:	select PLATFORM_LINUX
 //config:	select VOLUMEID
 //config:	help
-//config:	  Lists labels and UUIDs of all filesystems.
-//config:	  WARNING:
-//config:	  With all submodules selected, it will add ~8k to busybox.
+//config:	Lists labels and UUIDs of all filesystems.
+//config:	WARNING:
+//config:	With all submodules selected, it will add ~8k to busybox.
 //config:
 //config:config FEATURE_BLKID_TYPE
 //config:	bool "Print filesystem type"
 //config:	default n
 //config:	depends on BLKID
 //config:	help
-//config:	  Show TYPE="filesystem type"
+//config:	Show TYPE="filesystem type"
 
 //applet:IF_BLKID(APPLET(blkid, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/blockdev.c b/util-linux/blockdev.c
index 9924ef0..9e1fef2 100644
--- a/util-linux/blockdev.c
+++ b/util-linux/blockdev.c
@@ -9,7 +9,7 @@
 //config:	bool "blockdev (2.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Performs some ioctls with block devices.
+//config:	Performs some ioctls with block devices.
 
 //applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/cal.c b/util-linux/cal.c
index f7a9656..091fdbd 100644
--- a/util-linux/cal.c
+++ b/util-linux/cal.c
@@ -14,7 +14,7 @@
 //config:	bool "cal (6.5 kb)"
 //config:	default y
 //config:	help
-//config:	  cal is used to display a monthly calendar.
+//config:	cal is used to display a monthly calendar.
 
 //applet:IF_CAL(APPLET(cal, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/chrt.c b/util-linux/chrt.c
index ad13dd5..4bc8b6c 100644
--- a/util-linux/chrt.c
+++ b/util-linux/chrt.c
@@ -9,8 +9,8 @@
 //config:	bool "chrt (4.4 kb)"
 //config:	default y
 //config:	help
-//config:	  manipulate real-time attributes of a process.
-//config:	  This requires sched_{g,s}etparam support in your libc.
+//config:	manipulate real-time attributes of a process.
+//config:	This requires sched_{g,s}etparam support in your libc.
 
 //applet:IF_CHRT(APPLET(chrt, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/dmesg.c b/util-linux/dmesg.c
index 5822d02..6da9d9f 100644
--- a/util-linux/dmesg.c
+++ b/util-linux/dmesg.c
@@ -13,34 +13,34 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  dmesg is used to examine or control the kernel ring buffer. When the
-//config:	  Linux kernel prints messages to the system log, they are stored in
-//config:	  the kernel ring buffer. You can use dmesg to print the kernel's ring
-//config:	  buffer, clear the kernel ring buffer, change the size of the kernel
-//config:	  ring buffer, and change the priority level at which kernel messages
-//config:	  are also logged to the system console. Enable this option if you
-//config:	  wish to enable the 'dmesg' utility.
+//config:	dmesg is used to examine or control the kernel ring buffer. When the
+//config:	Linux kernel prints messages to the system log, they are stored in
+//config:	the kernel ring buffer. You can use dmesg to print the kernel's ring
+//config:	buffer, clear the kernel ring buffer, change the size of the kernel
+//config:	ring buffer, and change the priority level at which kernel messages
+//config:	are also logged to the system console. Enable this option if you
+//config:	wish to enable the 'dmesg' utility.
 //config:
 //config:config FEATURE_DMESG_PRETTY
 //config:	bool "Pretty output"
 //config:	default y
 //config:	depends on DMESG
 //config:	help
-//config:	  If you wish to scrub the syslog level from the output, say 'Y' here.
-//config:	  The syslog level is a string prefixed to every line with the form
-//config:	  "<#>".
+//config:	If you wish to scrub the syslog level from the output, say 'Y' here.
+//config:	The syslog level is a string prefixed to every line with the form
+//config:	"<#>".
 //config:
-//config:	  With this option you will see:
-//config:	    # dmesg
-//config:	    Linux version 2.6.17.4 .....
-//config:	    BIOS-provided physical RAM map:
-//config:	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+//config:	With this option you will see:
+//config:		# dmesg
+//config:		Linux version 2.6.17.4 .....
+//config:		BIOS-provided physical RAM map:
+//config:		 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 //config:
-//config:	  Without this option you will see:
-//config:	    # dmesg
-//config:	    <5>Linux version 2.6.17.4 .....
-//config:	    <6>BIOS-provided physical RAM map:
-//config:	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+//config:	Without this option you will see:
+//config:		# dmesg
+//config:		<5>Linux version 2.6.17.4 .....
+//config:		<6>BIOS-provided physical RAM map:
+//config:		<6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 
 //applet:IF_DMESG(APPLET(dmesg, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/eject.c b/util-linux/eject.c
index 07ac2fd..8095cbe 100644
--- a/util-linux/eject.c
+++ b/util-linux/eject.c
@@ -17,15 +17,15 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Used to eject cdroms. (defaults to /dev/cdrom)
+//config:	Used to eject cdroms. (defaults to /dev/cdrom)
 //config:
 //config:config FEATURE_EJECT_SCSI
 //config:	bool "SCSI support"
 //config:	default y
 //config:	depends on EJECT
 //config:	help
-//config:	  Add the -s option to eject, this allows to eject SCSI-Devices and
-//config:	  usb-storage devices.
+//config:	Add the -s option to eject, this allows to eject SCSI-Devices and
+//config:	usb-storage devices.
 
 //applet:IF_EJECT(APPLET(eject, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/fallocate.c b/util-linux/fallocate.c
index 34f01eb..70e7e17 100644
--- a/util-linux/fallocate.c
+++ b/util-linux/fallocate.c
@@ -9,7 +9,7 @@
 //config:	bool "fallocate (5 kb)"
 //config:	default y
 //config:	help
-//config:	  Preallocate space for files.
+//config:	Preallocate space for files.
 
 //applet:IF_FALLOCATE(APPLET(fallocate, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/fatattr.c b/util-linux/fatattr.c
index e69cb93..9fb566d 100644
--- a/util-linux/fatattr.c
+++ b/util-linux/fatattr.c
@@ -13,7 +13,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  fatattr lists or changes the file attributes on a fat file system.
+//config:	fatattr lists or changes the file attributes on a fat file system.
 
 //applet:IF_FATATTR(APPLET(fatattr, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/fbset.c b/util-linux/fbset.c
index 0b14181..11cb20c 100644
--- a/util-linux/fbset.c
+++ b/util-linux/fbset.c
@@ -16,29 +16,29 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  fbset is used to show or change the settings of a Linux frame buffer
-//config:	  device. The frame buffer device provides a simple and unique
-//config:	  interface to access a graphics display. Enable this option
-//config:	  if you wish to enable the 'fbset' utility.
+//config:	fbset is used to show or change the settings of a Linux frame buffer
+//config:	device. The frame buffer device provides a simple and unique
+//config:	interface to access a graphics display. Enable this option
+//config:	if you wish to enable the 'fbset' utility.
 //config:
 //config:config FEATURE_FBSET_FANCY
 //config:	bool "Enable extra options"
 //config:	default y
 //config:	depends on FBSET
 //config:	help
-//config:	  This option enables extended fbset options, allowing one to set the
-//config:	  framebuffer size, color depth, etc. interface to access a graphics
-//config:	  display. Enable this option if you wish to enable extended fbset
-//config:	  options.
+//config:	This option enables extended fbset options, allowing one to set the
+//config:	framebuffer size, color depth, etc. interface to access a graphics
+//config:	display. Enable this option if you wish to enable extended fbset
+//config:	options.
 //config:
 //config:config FEATURE_FBSET_READMODE
 //config:	bool "Enable readmode support"
 //config:	default y
 //config:	depends on FBSET
 //config:	help
-//config:	  This option allows fbset to read the video mode database stored by
-//config:	  default as /etc/fb.modes, which can be used to set frame buffer
-//config:	  device to pre-defined video modes.
+//config:	This option allows fbset to read the video mode database stored by
+//config:	default as /etc/fb.modes, which can be used to set frame buffer
+//config:	device to pre-defined video modes.
 
 //applet:IF_FBSET(APPLET(fbset, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/fdformat.c b/util-linux/fdformat.c
index 62077ff..6faaf1b 100644
--- a/util-linux/fdformat.c
+++ b/util-linux/fdformat.c
@@ -9,7 +9,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  fdformat is used to low-level format a floppy disk.
+//config:	fdformat is used to low-level format a floppy disk.
 
 //applet:IF_FDFORMAT(APPLET(fdformat, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/fdisk.c b/util-linux/fdisk.c
index c3784c2..e00f858 100644
--- a/util-linux/fdisk.c
+++ b/util-linux/fdisk.c
@@ -11,10 +11,10 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The fdisk utility is used to divide hard disks into one or more
-//config:	  logical disks, which are generally called partitions. This utility
-//config:	  can be used to list and edit the set of partitions or BSD style
-//config:	  'disk slices' that are defined on a hard drive.
+//config:	The fdisk utility is used to divide hard disks into one or more
+//config:	logical disks, which are generally called partitions. This utility
+//config:	can be used to list and edit the set of partitions or BSD style
+//config:	'disk slices' that are defined on a hard drive.
 //config:
 //config:config FDISK_SUPPORT_LARGE_DISKS
 //config:	bool "Support over 4GB disks"
@@ -27,59 +27,59 @@
 //config:	default y
 //config:	depends on FDISK
 //config:	help
-//config:	  Enabling this option allows you to create or change a partition table
-//config:	  and write those changes out to disk. If you leave this option
-//config:	  disabled, you will only be able to view the partition table.
+//config:	Enabling this option allows you to create or change a partition table
+//config:	and write those changes out to disk. If you leave this option
+//config:	disabled, you will only be able to view the partition table.
 //config:
 //config:config FEATURE_AIX_LABEL
 //config:	bool "Support AIX disklabels"
 //config:	default n
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to create or change AIX disklabels.
-//config:	  Most people can safely leave this option disabled.
+//config:	Enabling this option allows you to create or change AIX disklabels.
+//config:	Most people can safely leave this option disabled.
 //config:
 //config:config FEATURE_SGI_LABEL
 //config:	bool "Support SGI disklabels"
 //config:	default n
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to create or change SGI disklabels.
-//config:	  Most people can safely leave this option disabled.
+//config:	Enabling this option allows you to create or change SGI disklabels.
+//config:	Most people can safely leave this option disabled.
 //config:
 //config:config FEATURE_SUN_LABEL
 //config:	bool "Support SUN disklabels"
 //config:	default n
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to create or change SUN disklabels.
-//config:	  Most people can safely leave this option disabled.
+//config:	Enabling this option allows you to create or change SUN disklabels.
+//config:	Most people can safely leave this option disabled.
 //config:
 //config:config FEATURE_OSF_LABEL
 //config:	bool "Support BSD disklabels"
 //config:	default n
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to create or change BSD disklabels
-//config:	  and define and edit BSD disk slices.
+//config:	Enabling this option allows you to create or change BSD disklabels
+//config:	and define and edit BSD disk slices.
 //config:
 //config:config FEATURE_GPT_LABEL
 //config:	bool "Support GPT disklabels"
 //config:	default n
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to view GUID Partition Table
-//config:	  disklabels.
+//config:	Enabling this option allows you to view GUID Partition Table
+//config:	disklabels.
 //config:
 //config:config FEATURE_FDISK_ADVANCED
 //config:	bool "Support expert mode"
 //config:	default y
 //config:	depends on FDISK && FEATURE_FDISK_WRITABLE
 //config:	help
-//config:	  Enabling this option allows you to do terribly unsafe things like
-//config:	  define arbitrary drive geometry, move the beginning of data in a
-//config:	  partition, and similarly evil things. Unless you have a very good
-//config:	  reason you would be wise to leave this disabled.
+//config:	Enabling this option allows you to do terribly unsafe things like
+//config:	define arbitrary drive geometry, move the beginning of data in a
+//config:	partition, and similarly evil things. Unless you have a very good
+//config:	reason you would be wise to leave this disabled.
 
 //applet:IF_FDISK(APPLET(fdisk, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/findfs.c b/util-linux/findfs.c
index b9cd956..359da58 100644
--- a/util-linux/findfs.c
+++ b/util-linux/findfs.c
@@ -13,9 +13,9 @@
 //config:	select PLATFORM_LINUX
 //config:	select VOLUMEID
 //config:	help
-//config:	  Prints the name of a filesystem with given label or UUID.
-//config:	  WARNING:
-//config:	  With all submodules selected, it will add ~8k to busybox.
+//config:	Prints the name of a filesystem with given label or UUID.
+//config:	WARNING:
+//config:	With all submodules selected, it will add ~8k to busybox.
 
 /* Benefits from suid root: better access to /dev/BLOCKDEVs: */
 //applet:IF_FINDFS(APPLET(findfs, BB_DIR_SBIN, BB_SUID_MAYBE))
diff --git a/util-linux/flock.c b/util-linux/flock.c
index e777188..ec35af1 100644
--- a/util-linux/flock.c
+++ b/util-linux/flock.c
@@ -7,7 +7,7 @@
 //config:	bool "flock (6.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Manage locks from shell scripts
+//config:	Manage locks from shell scripts
 
 //applet:IF_FLOCK(APPLET(flock, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/freeramdisk.c b/util-linux/freeramdisk.c
index 0b8d2bc..55187cb 100644
--- a/util-linux/freeramdisk.c
+++ b/util-linux/freeramdisk.c
@@ -13,25 +13,25 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  fdflush is only needed when changing media on slightly-broken
-//config:	  removable media drives. It is used to make Linux believe that a
-//config:	  hardware disk-change switch has been actuated, which causes Linux to
-//config:	  forget anything it has cached from the previous media. If you have
-//config:	  such a slightly-broken drive, you will need to run fdflush every time
-//config:	  you change a disk. Most people have working hardware and can safely
-//config:	  leave this disabled.
+//config:	fdflush is only needed when changing media on slightly-broken
+//config:	removable media drives. It is used to make Linux believe that a
+//config:	hardware disk-change switch has been actuated, which causes Linux to
+//config:	forget anything it has cached from the previous media. If you have
+//config:	such a slightly-broken drive, you will need to run fdflush every time
+//config:	you change a disk. Most people have working hardware and can safely
+//config:	leave this disabled.
 //config:
 //config:config FREERAMDISK
 //config:	bool "freeramdisk (1.4 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Linux allows you to create ramdisks. This utility allows you to
-//config:	  delete them and completely free all memory that was used for the
-//config:	  ramdisk. For example, if you boot Linux into a ramdisk and later
-//config:	  pivot_root, you may want to free the memory that is allocated to the
-//config:	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
-//config:	  this disabled.
+//config:	Linux allows you to create ramdisks. This utility allows you to
+//config:	delete them and completely free all memory that was used for the
+//config:	ramdisk. For example, if you boot Linux into a ramdisk and later
+//config:	pivot_root, you may want to free the memory that is allocated to the
+//config:	ramdisk. If you have no use for freeing memory from a ramdisk, leave
+//config:	this disabled.
 
 //                  APPLET_ODDNAME:name     main         location    suid_type     help
 //applet:IF_FDFLUSH(APPLET_ODDNAME(fdflush, freeramdisk, BB_DIR_BIN, BB_SUID_DROP, fdflush))
diff --git a/util-linux/fsck_minix.c b/util-linux/fsck_minix.c
index 2ab7530..8c2b7d8 100644
--- a/util-linux/fsck_minix.c
+++ b/util-linux/fsck_minix.c
@@ -89,12 +89,12 @@
 //config:	bool "fsck_minix"
 //config:	default y
 //config:	help
-//config:	  The minix filesystem is a nice, small, compact, read-write filesystem
-//config:	  with little overhead. It is not a journaling filesystem however and
-//config:	  can experience corruption if it is not properly unmounted or if the
-//config:	  power goes off in the middle of a write. This utility allows you to
-//config:	  check for and attempt to repair any corruption that occurs to a minix
-//config:	  filesystem.
+//config:	The minix filesystem is a nice, small, compact, read-write filesystem
+//config:	with little overhead. It is not a journaling filesystem however and
+//config:	can experience corruption if it is not properly unmounted or if the
+//config:	power goes off in the middle of a write. This utility allows you to
+//config:	check for and attempt to repair any corruption that occurs to a minix
+//config:	filesystem.
 
 //applet:IF_FSCK_MINIX(APPLET_ODDNAME(fsck.minix, fsck_minix, BB_DIR_SBIN, BB_SUID_DROP, fsck_minix))
 
diff --git a/util-linux/fsfreeze.c b/util-linux/fsfreeze.c
index 8bc4c47..5c10c80 100644
--- a/util-linux/fsfreeze.c
+++ b/util-linux/fsfreeze.c
@@ -11,7 +11,7 @@
 //config:	select PLATFORM_LINUX
 //config:	select LONG_OPTS
 //config:	help
-//config:	  Halt new accesses and flush writes on a mounted filesystem.
+//config:	Halt new accesses and flush writes on a mounted filesystem.
 
 //applet:IF_FSFREEZE(APPLET(fsfreeze, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/fstrim.c b/util-linux/fstrim.c
index c07da8a..6d0d61d 100644
--- a/util-linux/fstrim.c
+++ b/util-linux/fstrim.c
@@ -13,7 +13,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Discard unused blocks on a mounted filesystem.
+//config:	Discard unused blocks on a mounted filesystem.
 
 //applet:IF_FSTRIM(APPLET(fstrim, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/getopt.c b/util-linux/getopt.c
index 7c65a6a..cd5679c 100644
--- a/util-linux/getopt.c
+++ b/util-linux/getopt.c
@@ -33,19 +33,19 @@
 //config:	bool "getopt (5.6 kb)"
 //config:	default y
 //config:	help
-//config:	  The getopt utility is used to break up (parse) options in command
-//config:	  lines to make it easy to write complex shell scripts that also check
-//config:	  for legal (and illegal) options. If you want to write horribly
-//config:	  complex shell scripts, or use some horribly complex shell script
-//config:	  written by others, this utility may be for you. Most people will
-//config:	  wisely leave this disabled.
+//config:	The getopt utility is used to break up (parse) options in command
+//config:	lines to make it easy to write complex shell scripts that also check
+//config:	for legal (and illegal) options. If you want to write horribly
+//config:	complex shell scripts, or use some horribly complex shell script
+//config:	written by others, this utility may be for you. Most people will
+//config:	wisely leave this disabled.
 //config:
 //config:config FEATURE_GETOPT_LONG
 //config:	bool "Support option -l"
 //config:	default y if LONG_OPTS
 //config:	depends on GETOPT
 //config:	help
-//config:	  Enable support for long options (option -l).
+//config:	Enable support for long options (option -l).
 
 //applet:IF_GETOPT(APPLET(getopt, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/hexdump.c b/util-linux/hexdump.c
index e8c0ee0..719feaf 100644
--- a/util-linux/hexdump.c
+++ b/util-linux/hexdump.c
@@ -12,24 +12,24 @@
 //config:	bool "hexdump (8.8 kb)"
 //config:	default y
 //config:	help
-//config:	  The hexdump utility is used to display binary data in a readable
-//config:	  way that is comparable to the output from most hex editors.
+//config:	The hexdump utility is used to display binary data in a readable
+//config:	way that is comparable to the output from most hex editors.
 //config:
 //config:config FEATURE_HEXDUMP_REVERSE
 //config:	bool "Support -R, reverse of 'hexdump -Cv'"
 //config:	default y
 //config:	depends on HEXDUMP
 //config:	help
-//config:	  The hexdump utility is used to display binary data in an ascii
-//config:	  readable way. This option creates binary data from an ascii input.
-//config:	  NB: this option is non-standard. It's unwise to use it in scripts
-//config:	  aimed to be portable.
+//config:	The hexdump utility is used to display binary data in an ascii
+//config:	readable way. This option creates binary data from an ascii input.
+//config:	NB: this option is non-standard. It's unwise to use it in scripts
+//config:	aimed to be portable.
 //config:
 //config:config HD
 //config:	bool "hd (8 kb)"
 //config:	default y
 //config:	help
-//config:	  hd is an alias to hexdump -C.
+//config:	hd is an alias to hexdump -C.
 
 //applet:IF_HEXDUMP(APPLET_NOEXEC(hexdump, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hexdump))
 //applet:IF_HD(APPLET_NOEXEC(hd, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hd))
diff --git a/util-linux/hexdump_xxd.c b/util-linux/hexdump_xxd.c
index 5f72d3b..37e58f2 100644
--- a/util-linux/hexdump_xxd.c
+++ b/util-linux/hexdump_xxd.c
@@ -10,8 +10,8 @@
 //config:	bool "xxd (8.9 kb)"
 //config:	default y
 //config:	help
-//config:	  The xxd utility is used to display binary data in a readable
-//config:	  way that is comparable to the output from most hex editors.
+//config:	The xxd utility is used to display binary data in a readable
+//config:	way that is comparable to the output from most hex editors.
 
 //applet:IF_XXD(APPLET_NOEXEC(xxd, xxd, BB_DIR_USR_BIN, BB_SUID_DROP, xxd))
 
diff --git a/util-linux/hwclock.c b/util-linux/hwclock.c
index c2721db..5df56de 100644
--- a/util-linux/hwclock.c
+++ b/util-linux/hwclock.c
@@ -11,10 +11,10 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The hwclock utility is used to read and set the hardware clock
-//config:	  on a system. This is primarily used to set the current time on
-//config:	  shutdown in the hardware clock, so the hardware will keep the
-//config:	  correct time when Linux is _not_ running.
+//config:	The hwclock utility is used to read and set the hardware clock
+//config:	on a system. This is primarily used to set the current time on
+//config:	shutdown in the hardware clock, so the hardware will keep the
+//config:	correct time when Linux is _not_ running.
 //config:
 //config:config FEATURE_HWCLOCK_LONG_OPTIONS
 //config:	bool "Support long options (--hctosys,...)"
@@ -26,12 +26,12 @@
 //config:	default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
 //config:	depends on HWCLOCK
 //config:	help
-//config:	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-//config:	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-//config:	  to use the FHS behavior, answer Y here, otherwise answer N for the
-//config:	  classic /etc/adjtime path.
+//config:	Starting with FHS 2.3, the adjtime state file is supposed to exist
+//config:	at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+//config:	to use the FHS behavior, answer Y here, otherwise answer N for the
+//config:	classic /etc/adjtime path.
 //config:
-//config:	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+//config:	pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
 
 //applet:IF_HWCLOCK(APPLET(hwclock, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/ionice.c b/util-linux/ionice.c
index cda5a90..c7b7f03 100644
--- a/util-linux/ionice.c
+++ b/util-linux/ionice.c
@@ -11,8 +11,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Set/set program io scheduling class and priority
-//config:	  Requires kernel >= 2.6.13
+//config:	Set/set program io scheduling class and priority
+//config:	Requires kernel >= 2.6.13
 
 //applet:IF_IONICE(APPLET(ionice, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/ipcrm.c b/util-linux/ipcrm.c
index cabd8b9..c51d331 100644
--- a/util-linux/ipcrm.c
+++ b/util-linux/ipcrm.c
@@ -11,9 +11,9 @@
 //config:	bool "ipcrm (2.9 kb)"
 //config:	default y
 //config:	help
-//config:	  The ipcrm utility allows the removal of System V interprocess
-//config:	  communication (IPC) objects and the associated data structures
-//config:	  from the system.
+//config:	The ipcrm utility allows the removal of System V interprocess
+//config:	communication (IPC) objects and the associated data structures
+//config:	from the system.
 
 //applet:IF_IPCRM(APPLET(ipcrm, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/ipcs.c b/util-linux/ipcs.c
index 0d5a16a..1404930 100644
--- a/util-linux/ipcs.c
+++ b/util-linux/ipcs.c
@@ -12,8 +12,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The ipcs utility is used to provide information on the currently
-//config:	  allocated System V interprocess (IPC) objects in the system.
+//config:	The ipcs utility is used to provide information on the currently
+//config:	allocated System V interprocess (IPC) objects in the system.
 
 //applet:IF_IPCS(APPLET(ipcs, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/last.c b/util-linux/last.c
index 5bce857..f5ee8e5 100644
--- a/util-linux/last.c
+++ b/util-linux/last.c
@@ -11,15 +11,15 @@
 //config:	default y
 //config:	depends on FEATURE_WTMP
 //config:	help
-//config:	  'last' displays a list of the last users that logged into the system.
+//config:	'last' displays a list of the last users that logged into the system.
 //config:
 //config:config FEATURE_LAST_FANCY
 //config:	bool "Output extra information"
 //config:	default y
 //config:	depends on LAST
 //config:	help
-//config:	  'last' displays detailed information about the last users that
-//config:	  logged into the system (mimics sysvinit last). +900 bytes.
+//config:	'last' displays detailed information about the last users that
+//config:	logged into the system (mimics sysvinit last). +900 bytes.
 
 //applet:IF_LAST(APPLET(last, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/losetup.c b/util-linux/losetup.c
index cbd1c60..c608de6 100644
--- a/util-linux/losetup.c
+++ b/util-linux/losetup.c
@@ -11,9 +11,9 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  losetup is used to associate or detach a loop device with a regular
-//config:	  file or block device, and to query the status of a loop device. This
-//config:	  version does not currently support enabling data encryption.
+//config:	losetup is used to associate or detach a loop device with a regular
+//config:	file or block device, and to query the status of a loop device. This
+//config:	version does not currently support enabling data encryption.
 
 //kbuild:lib-$(CONFIG_LOSETUP) += losetup.o
 
diff --git a/util-linux/lspci.c b/util-linux/lspci.c
index c4f43bd..3877deb 100644
--- a/util-linux/lspci.c
+++ b/util-linux/lspci.c
@@ -11,10 +11,10 @@
 //config:	default y
 //config:	#select PLATFORM_LINUX
 //config:	help
-//config:	  lspci is a utility for displaying information about PCI buses in the
-//config:	  system and devices connected to them.
+//config:	lspci is a utility for displaying information about PCI buses in the
+//config:	system and devices connected to them.
 //config:
-//config:	  This version uses sysfs (/sys/bus/pci/devices) only.
+//config:	This version uses sysfs (/sys/bus/pci/devices) only.
 
 //applet:IF_LSPCI(APPLET(lspci, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/lsusb.c b/util-linux/lsusb.c
index 9d12d87..cabf047 100644
--- a/util-linux/lsusb.c
+++ b/util-linux/lsusb.c
@@ -11,10 +11,10 @@
 //config:	default y
 //config:	#select PLATFORM_LINUX
 //config:	help
-//config:	  lsusb is a utility for displaying information about USB buses in the
-//config:	  system and devices connected to them.
+//config:	lsusb is a utility for displaying information about USB buses in the
+//config:	system and devices connected to them.
 //config:
-//config:	  This version uses sysfs (/sys/bus/usb/devices) only.
+//config:	This version uses sysfs (/sys/bus/usb/devices) only.
 
 //applet:IF_LSUSB(APPLET(lsusb, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/mdev.c b/util-linux/mdev.c
index a68e3f4..23b6f82 100644
--- a/util-linux/mdev.c
+++ b/util-linux/mdev.c
@@ -13,58 +13,58 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  mdev is a mini-udev implementation for dynamically creating device
-//config:	  nodes in the /dev directory.
+//config:	mdev is a mini-udev implementation for dynamically creating device
+//config:	nodes in the /dev directory.
 //config:
-//config:	  For more information, please see docs/mdev.txt
+//config:	For more information, please see docs/mdev.txt
 //config:
 //config:config FEATURE_MDEV_CONF
 //config:	bool "Support /etc/mdev.conf"
 //config:	default y
 //config:	depends on MDEV
 //config:	help
-//config:	  Add support for the mdev config file to control ownership and
-//config:	  permissions of the device nodes.
+//config:	Add support for the mdev config file to control ownership and
+//config:	permissions of the device nodes.
 //config:
-//config:	  For more information, please see docs/mdev.txt
+//config:	For more information, please see docs/mdev.txt
 //config:
 //config:config FEATURE_MDEV_RENAME
 //config:	bool "Support subdirs/symlinks"
 //config:	default y
 //config:	depends on FEATURE_MDEV_CONF
 //config:	help
-//config:	  Add support for renaming devices and creating symlinks.
+//config:	Add support for renaming devices and creating symlinks.
 //config:
-//config:	  For more information, please see docs/mdev.txt
+//config:	For more information, please see docs/mdev.txt
 //config:
 //config:config FEATURE_MDEV_RENAME_REGEXP
 //config:	bool "Support regular expressions substitutions when renaming device"
 //config:	default y
 //config:	depends on FEATURE_MDEV_RENAME
 //config:	help
-//config:	  Add support for regular expressions substitutions when renaming
-//config:	  device.
+//config:	Add support for regular expressions substitutions when renaming
+//config:	device.
 //config:
 //config:config FEATURE_MDEV_EXEC
 //config:	bool "Support command execution at device addition/removal"
 //config:	default y
 //config:	depends on FEATURE_MDEV_CONF
 //config:	help
-//config:	  This adds support for an optional field to /etc/mdev.conf for
-//config:	  executing commands when devices are created/removed.
+//config:	This adds support for an optional field to /etc/mdev.conf for
+//config:	executing commands when devices are created/removed.
 //config:
-//config:	  For more information, please see docs/mdev.txt
+//config:	For more information, please see docs/mdev.txt
 //config:
 //config:config FEATURE_MDEV_LOAD_FIRMWARE
 //config:	bool "Support loading of firmwares"
 //config:	default y
 //config:	depends on MDEV
 //config:	help
-//config:	  Some devices need to load firmware before they can be usable.
+//config:	Some devices need to load firmware before they can be usable.
 //config:
-//config:	  These devices will request userspace look up the files in
-//config:	  /lib/firmware/ and if it exists, send it to the kernel for
-//config:	  loading into the hardware.
+//config:	These devices will request userspace look up the files in
+//config:	/lib/firmware/ and if it exists, send it to the kernel for
+//config:	loading into the hardware.
 
 //applet:IF_MDEV(APPLET(mdev, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/mesg.c b/util-linux/mesg.c
index a83da03..c4371eb 100644
--- a/util-linux/mesg.c
+++ b/util-linux/mesg.c
@@ -11,20 +11,20 @@
 //config:	bool "mesg (1.2 kb)"
 //config:	default y
 //config:	help
-//config:	  Mesg controls access to your terminal by others. It is typically
-//config:	  used to allow or disallow other users to write to your terminal
+//config:	Mesg controls access to your terminal by others. It is typically
+//config:	used to allow or disallow other users to write to your terminal
 //config:
 //config:config FEATURE_MESG_ENABLE_ONLY_GROUP
 //config:	bool "Enable writing to tty only by group, not by everybody"
 //config:	default y
 //config:	depends on MESG
 //config:	help
-//config:	  Usually, ttys are owned by group "tty", and "write" tool is
-//config:	  setgid to this group. This way, "mesg y" only needs to enable
-//config:	  "write by owning group" bit in tty mode.
+//config:	Usually, ttys are owned by group "tty", and "write" tool is
+//config:	setgid to this group. This way, "mesg y" only needs to enable
+//config:	"write by owning group" bit in tty mode.
 //config:
-//config:	  If you set this option to N, "mesg y" will enable writing
-//config:	  by anybody at all. This is not recommended.
+//config:	If you set this option to N, "mesg y" will enable writing
+//config:	by anybody at all. This is not recommended.
 
 //applet:IF_MESG(APPLET(mesg, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/mkfs_ext2.c b/util-linux/mkfs_ext2.c
index f646f36..8434dd6 100644
--- a/util-linux/mkfs_ext2.c
+++ b/util-linux/mkfs_ext2.c
@@ -12,14 +12,14 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Utility to create EXT2 filesystems.
+//config:	Utility to create EXT2 filesystems.
 //config:
 //config:config MKFS_EXT2
 //config:	bool "mkfs.ext2 (9.8 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Alias to "mke2fs".
+//config:	Alias to "mke2fs".
 
 //                    APPLET_ODDNAME:name       main       location     suid_type     help
 //applet:IF_MKE2FS(   APPLET_ODDNAME(mke2fs,    mkfs_ext2, BB_DIR_SBIN, BB_SUID_DROP, mkfs_ext2))
diff --git a/util-linux/mkfs_minix.c b/util-linux/mkfs_minix.c
index 0dfe347..88647e9 100644
--- a/util-linux/mkfs_minix.c
+++ b/util-linux/mkfs_minix.c
@@ -67,18 +67,18 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The minix filesystem is a nice, small, compact, read-write filesystem
-//config:	  with little overhead. If you wish to be able to create minix
-//config:	  filesystems this utility will do the job for you.
+//config:	The minix filesystem is a nice, small, compact, read-write filesystem
+//config:	with little overhead. If you wish to be able to create minix
+//config:	filesystems this utility will do the job for you.
 //config:
 //config:config FEATURE_MINIX2
 //config:	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 //config:	default y
 //config:	depends on FSCK_MINIX || MKFS_MINIX
 //config:	help
-//config:	  If you wish to be able to create version 2 minix filesystems, enable
-//config:	  this. If you enabled 'mkfs_minix' then you almost certainly want to
-//config:	  be using the version 2 filesystem support.
+//config:	If you wish to be able to create version 2 minix filesystems, enable
+//config:	this. If you enabled 'mkfs_minix' then you almost certainly want to
+//config:	be using the version 2 filesystem support.
 
 //                     APPLET_ODDNAME:name        main        location     suid_type     help
 //applet:IF_MKFS_MINIX(APPLET_ODDNAME(mkfs.minix, mkfs_minix, BB_DIR_SBIN, BB_SUID_DROP, mkfs_minix))
diff --git a/util-linux/mkfs_reiser.c b/util-linux/mkfs_reiser.c
index d01119f..c7d99b0 100644
--- a/util-linux/mkfs_reiser.c
+++ b/util-linux/mkfs_reiser.c
@@ -11,8 +11,8 @@
 //config:	default n
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Utility to create ReiserFS filesystems.
-//config:	  Note: this applet needs a lot of testing and polishing.
+//config:	Utility to create ReiserFS filesystems.
+//config:	Note: this applet needs a lot of testing and polishing.
 
 //applet:IF_MKFS_REISER(APPLET_ODDNAME(mkfs.reiser, mkfs_reiser, BB_DIR_SBIN, BB_SUID_DROP, mkfs_reiser))
 
diff --git a/util-linux/mkfs_vfat.c b/util-linux/mkfs_vfat.c
index a191c03..f9768ed 100644
--- a/util-linux/mkfs_vfat.c
+++ b/util-linux/mkfs_vfat.c
@@ -12,14 +12,14 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Utility to create FAT32 filesystems.
+//config:	Utility to create FAT32 filesystems.
 //config:
 //config:config MKFS_VFAT
 //config:	bool "mkfs.vfat (6.8 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Alias to "mkdosfs".
+//config:	Alias to "mkdosfs".
 
 //                    APPLET_ODDNAME:name       main       location     suid_type     help
 //applet:IF_MKDOSFS(  APPLET_ODDNAME(mkdosfs,   mkfs_vfat, BB_DIR_SBIN, BB_SUID_DROP, mkfs_vfat))
diff --git a/util-linux/mkswap.c b/util-linux/mkswap.c
index deb9114..e44e13c 100644
--- a/util-linux/mkswap.c
+++ b/util-linux/mkswap.c
@@ -9,21 +9,21 @@
 //config:	bool "mkswap (5.8 kb)"
 //config:	default y
 //config:	help
-//config:	  The mkswap utility is used to configure a file or disk partition as
-//config:	  Linux swap space. This allows Linux to use the entire file or
-//config:	  partition as if it were additional RAM, which can greatly increase
-//config:	  the capability of low-memory machines. This additional memory is
-//config:	  much slower than real RAM, but can be very helpful at preventing your
-//config:	  applications being killed by the Linux out of memory (OOM) killer.
-//config:	  Once you have created swap space using 'mkswap' you need to enable
-//config:	  the swap space using the 'swapon' utility.
+//config:	The mkswap utility is used to configure a file or disk partition as
+//config:	Linux swap space. This allows Linux to use the entire file or
+//config:	partition as if it were additional RAM, which can greatly increase
+//config:	the capability of low-memory machines. This additional memory is
+//config:	much slower than real RAM, but can be very helpful at preventing your
+//config:	applications being killed by the Linux out of memory (OOM) killer.
+//config:	Once you have created swap space using 'mkswap' you need to enable
+//config:	the swap space using the 'swapon' utility.
 //config:
 //config:config FEATURE_MKSWAP_UUID
 //config:	bool "UUID support"
 //config:	default y
 //config:	depends on MKSWAP
 //config:	help
-//config:	  Generate swap spaces with universally unique identifiers.
+//config:	Generate swap spaces with universally unique identifiers.
 
 //applet:IF_MKSWAP(APPLET(mkswap, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/more.c b/util-linux/more.c
index 11546a8..926cf5f 100644
--- a/util-linux/more.c
+++ b/util-linux/more.c
@@ -17,11 +17,11 @@
 //config:	bool "more (6.7 kb)"
 //config:	default y
 //config:	help
-//config:	  more is a simple utility which allows you to read text one screen
-//config:	  sized page at a time. If you want to read text that is larger than
-//config:	  the screen, and you are using anything faster than a 300 baud modem,
-//config:	  you will probably find this utility very helpful. If you don't have
-//config:	  any need to reading text files, you can leave this disabled.
+//config:	more is a simple utility which allows you to read text one screen
+//config:	sized page at a time. If you want to read text that is larger than
+//config:	the screen, and you are using anything faster than a 300 baud modem,
+//config:	you will probably find this utility very helpful. If you don't have
+//config:	any need to reading text files, you can leave this disabled.
 
 //applet:IF_MORE(APPLET(more, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/mount.c b/util-linux/mount.c
index 423e89d..1a39da2 100644
--- a/util-linux/mount.c
+++ b/util-linux/mount.c
@@ -22,40 +22,40 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  All files and filesystems in Unix are arranged into one big directory
-//config:	  tree. The 'mount' utility is used to graft a filesystem onto a
-//config:	  particular part of the tree. A filesystem can either live on a block
-//config:	  device, or it can be accessible over the network, as is the case with
-//config:	  NFS filesystems. Most people using BusyBox will also want to enable
-//config:	  the 'mount' utility.
+//config:	All files and filesystems in Unix are arranged into one big directory
+//config:	tree. The 'mount' utility is used to graft a filesystem onto a
+//config:	particular part of the tree. A filesystem can either live on a block
+//config:	device, or it can be accessible over the network, as is the case with
+//config:	NFS filesystems. Most people using BusyBox will also want to enable
+//config:	the 'mount' utility.
 //config:
 //config:config FEATURE_MOUNT_FAKE
 //config:	bool "Support option -f"
 //config:	default y
 //config:	depends on MOUNT
 //config:	help
-//config:	  Enable support for faking a file system mount.
+//config:	Enable support for faking a file system mount.
 //config:
 //config:config FEATURE_MOUNT_VERBOSE
 //config:	bool "Support option -v"
 //config:	default y
 //config:	depends on MOUNT
 //config:	help
-//config:	  Enable multi-level -v[vv...] verbose messages. Useful if you
-//config:	  debug mount problems and want to see what is exactly passed
-//config:	  to the kernel.
+//config:	Enable multi-level -v[vv...] verbose messages. Useful if you
+//config:	debug mount problems and want to see what is exactly passed
+//config:	to the kernel.
 //config:
 //config:config FEATURE_MOUNT_HELPERS
 //config:	bool "Support mount helpers"
 //config:	default n
 //config:	depends on MOUNT
 //config:	help
-//config:	  Enable mounting of virtual file systems via external helpers.
-//config:	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
-//config:	  "obexfs -b00.11.22.33.44.55 /mnt"
-//config:	  Also "mount -t sometype [-o opts] fs /mnt" will try
-//config:	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
-//config:	  The idea is to use such virtual filesystems in /etc/fstab.
+//config:	Enable mounting of virtual file systems via external helpers.
+//config:	E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+//config:	"obexfs -b00.11.22.33.44.55 /mnt"
+//config:	Also "mount -t sometype [-o opts] fs /mnt" will try
+//config:	"sometype [-o opts] fs /mnt" if simple mount syscall fails.
+//config:	The idea is to use such virtual filesystems in /etc/fstab.
 //config:
 //config:config FEATURE_MOUNT_LABEL
 //config:	bool "Support specifying devices by label or UUID"
@@ -63,9 +63,9 @@
 //config:	depends on MOUNT
 //config:	select VOLUMEID
 //config:	help
-//config:	  This allows for specifying a device by label or uuid, rather than by
-//config:	  name. This feature utilizes the same functionality as blkid/findfs.
-//config:	  This also enables label or uuid support for swapon.
+//config:	This allows for specifying a device by label or uuid, rather than by
+//config:	name. This feature utilizes the same functionality as blkid/findfs.
+//config:	This also enables label or uuid support for swapon.
 //config:
 //config:config FEATURE_MOUNT_NFS
 //config:	bool "Support mounting NFS file systems on Linux < 2.6.23"
@@ -74,43 +74,43 @@
 //config:	select FEATURE_HAVE_RPC
 //config:	select FEATURE_SYSLOG
 //config:	help
-//config:	  Enable mounting of NFS file systems on Linux kernels prior
-//config:	  to version 2.6.23. Note that in this case mounting of NFS
-//config:	  over IPv6 will not be possible.
+//config:	Enable mounting of NFS file systems on Linux kernels prior
+//config:	to version 2.6.23. Note that in this case mounting of NFS
+//config:	over IPv6 will not be possible.
 //config:
-//config:	  Note that this option links in RPC support from libc,
-//config:	  which is rather large (~10 kbytes on uclibc).
+//config:	Note that this option links in RPC support from libc,
+//config:	which is rather large (~10 kbytes on uclibc).
 //config:
 //config:config FEATURE_MOUNT_CIFS
 //config:	bool "Support mounting CIFS/SMB file systems"
 //config:	default y
 //config:	depends on MOUNT
 //config:	help
-//config:	  Enable support for samba mounts.
+//config:	Enable support for samba mounts.
 //config:
 //config:config FEATURE_MOUNT_FLAGS
 //config:	depends on MOUNT
 //config:	bool "Support lots of -o flags"
 //config:	default y
 //config:	help
-//config:	  Without this, mount only supports ro/rw/remount. With this, it
-//config:	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
-//config:	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
-//config:	  private, unbindable, rshared, rslave, rprivate, and runbindable.
+//config:	Without this, mount only supports ro/rw/remount. With this, it
+//config:	supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+//config:	noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+//config:	private, unbindable, rshared, rslave, rprivate, and runbindable.
 //config:
 //config:config FEATURE_MOUNT_FSTAB
 //config:	depends on MOUNT
 //config:	bool "Support /etc/fstab and -a"
 //config:	default y
 //config:	help
-//config:	  Support mount all and looking for files in /etc/fstab.
+//config:	Support mount all and looking for files in /etc/fstab.
 //config:
 //config:config FEATURE_MOUNT_OTHERTAB
 //config:	depends on FEATURE_MOUNT_FSTAB
 //config:	bool "Support -T <alt_fstab>"
 //config:	default y
 //config:	help
-//config:	  Support mount -T (specifying an alternate fstab)
+//config:	Support mount -T (specifying an alternate fstab)
 
 /* On full-blown systems, requires suid for user mounts.
  * But it's not unthinkable to have it available in non-suid flavor on some systems,
diff --git a/util-linux/mountpoint.c b/util-linux/mountpoint.c
index 0ba4a30..b7f0481 100644
--- a/util-linux/mountpoint.c
+++ b/util-linux/mountpoint.c
@@ -12,7 +12,7 @@
 //config:	bool "mountpoint (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  mountpoint checks if the directory is a mountpoint.
+//config:	mountpoint checks if the directory is a mountpoint.
 
 //applet:IF_MOUNTPOINT(APPLET(mountpoint, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/nsenter.c b/util-linux/nsenter.c
index 315e342..12c86b0 100644
--- a/util-linux/nsenter.c
+++ b/util-linux/nsenter.c
@@ -12,15 +12,15 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Run program with namespaces of other processes.
+//config:	Run program with namespaces of other processes.
 //config:
 //config:config FEATURE_NSENTER_LONG_OPTS
 //config:	bool "Enable long options"
 //config:	default y
 //config:	depends on NSENTER && LONG_OPTS
 //config:	help
-//config:	  Support long options for the nsenter applet. This makes
-//config:	  the busybox implementation more compatible with upstream.
+//config:	Support long options for the nsenter applet. This makes
+//config:	the busybox implementation more compatible with upstream.
 
 //applet:IF_NSENTER(APPLET(nsenter, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/pivot_root.c b/util-linux/pivot_root.c
index c21291b..3310380 100644
--- a/util-linux/pivot_root.c
+++ b/util-linux/pivot_root.c
@@ -13,13 +13,13 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The pivot_root utility swaps the mount points for the root filesystem
-//config:	  with some other mounted filesystem. This allows you to do all sorts
-//config:	  of wild and crazy things with your Linux system and is far more
-//config:	  powerful than 'chroot'.
+//config:	The pivot_root utility swaps the mount points for the root filesystem
+//config:	with some other mounted filesystem. This allows you to do all sorts
+//config:	of wild and crazy things with your Linux system and is far more
+//config:	powerful than 'chroot'.
 //config:
-//config:	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
-//config:	  in linux 2.6) use switch_root instead.
+//config:	Note: This is for initrd in linux 2.4. Under initramfs (introduced
+//config:	in linux 2.6) use switch_root instead.
 
 //applet:IF_PIVOT_ROOT(APPLET(pivot_root, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/rdate.c b/util-linux/rdate.c
index d950b45..66b877e 100644
--- a/util-linux/rdate.c
+++ b/util-linux/rdate.c
@@ -11,10 +11,10 @@
 //config:	bool "rdate (6 kb)"
 //config:	default y
 //config:	help
-//config:	  The rdate utility allows you to synchronize the date and time of your
-//config:	  system clock with the date and time of a remote networked system using
-//config:	  the RFC868 protocol, which is built into the inetd daemon on most
-//config:	  systems.
+//config:	The rdate utility allows you to synchronize the date and time of your
+//config:	system clock with the date and time of a remote networked system using
+//config:	the RFC868 protocol, which is built into the inetd daemon on most
+//config:	systems.
 
 //applet:IF_RDATE(APPLET(rdate, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/rdev.c b/util-linux/rdev.c
index 6ea9c2a..2ffe076 100644
--- a/util-linux/rdev.c
+++ b/util-linux/rdev.c
@@ -12,7 +12,7 @@
 //config:	bool "rdev (1.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Print the device node associated with the filesystem mounted at '/'.
+//config:	Print the device node associated with the filesystem mounted at '/'.
 
 //applet:IF_RDEV(APPLET(rdev, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/readprofile.c b/util-linux/readprofile.c
index b4cb580..b045657 100644
--- a/util-linux/readprofile.c
+++ b/util-linux/readprofile.c
@@ -36,7 +36,7 @@
 //config:	default y
 //config:	#select PLATFORM_LINUX
 //config:	help
-//config:	  This allows you to parse /proc/profile for basic profiling.
+//config:	This allows you to parse /proc/profile for basic profiling.
 
 //applet:IF_READPROFILE(APPLET(readprofile, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/renice.c b/util-linux/renice.c
index 751af45..23cbca8 100644
--- a/util-linux/renice.c
+++ b/util-linux/renice.c
@@ -22,8 +22,8 @@
 //config:	bool "renice (3.8 kb)"
 //config:	default y
 //config:	help
-//config:	  Renice alters the scheduling priority of one or more running
-//config:	  processes.
+//config:	Renice alters the scheduling priority of one or more running
+//config:	processes.
 
 //applet:IF_RENICE(APPLET(renice, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/rev.c b/util-linux/rev.c
index 3d07b22..2bef9b9 100644
--- a/util-linux/rev.c
+++ b/util-linux/rev.c
@@ -9,7 +9,7 @@
 //config:	bool "rev (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Reverse lines of a file or files.
+//config:	Reverse lines of a file or files.
 
 //applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/rtcwake.c b/util-linux/rtcwake.c
index 01ab8eb..4c47c53 100644
--- a/util-linux/rtcwake.c
+++ b/util-linux/rtcwake.c
@@ -27,7 +27,7 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Enter a system sleep state until specified wakeup time.
+//config:	Enter a system sleep state until specified wakeup time.
 
 //applet:IF_RTCWAKE(APPLET(rtcwake, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/script.c b/util-linux/script.c
index d82a92d..9eebb51 100644
--- a/util-linux/script.c
+++ b/util-linux/script.c
@@ -14,7 +14,7 @@
 //config:	bool "script (8 kb)"
 //config:	default y
 //config:	help
-//config:	  The script makes typescript of terminal session.
+//config:	The script makes typescript of terminal session.
 
 //applet:IF_SCRIPT(APPLET(script, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/scriptreplay.c b/util-linux/scriptreplay.c
index d0050f2..7e98501 100644
--- a/util-linux/scriptreplay.c
+++ b/util-linux/scriptreplay.c
@@ -11,8 +11,8 @@
 //config:	bool "scriptreplay (2.6 kb)"
 //config:	default y
 //config:	help
-//config:	  This program replays a typescript, using timing information
-//config:	  given by script -t.
+//config:	This program replays a typescript, using timing information
+//config:	given by script -t.
 
 //applet:IF_SCRIPTREPLAY(APPLET(scriptreplay, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/setarch.c b/util-linux/setarch.c
index 07de7f4..d4b5688 100644
--- a/util-linux/setarch.c
+++ b/util-linux/setarch.c
@@ -11,24 +11,24 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The linux32 utility is used to create a 32bit environment for the
-//config:	  specified program (usually a shell). It only makes sense to have
-//config:	  this util on a system that supports both 64bit and 32bit userland
-//config:	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+//config:	The linux32 utility is used to create a 32bit environment for the
+//config:	specified program (usually a shell). It only makes sense to have
+//config:	this util on a system that supports both 64bit and 32bit userland
+//config:	(like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
 //config:
 //config:config LINUX32
 //config:	bool "linux32 (3.2 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Alias to "setarch linux32".
+//config:	Alias to "setarch linux32".
 //config:
 //config:config LINUX64
 //config:	bool "linux64 (3.2 kb)"
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Alias to "setarch linux64".
+//config:	Alias to "setarch linux64".
 
 //applet:IF_SETARCH(APPLET(setarch, BB_DIR_BIN, BB_SUID_DROP))
 //                  APPLET_ODDNAME:name     main     location    suid_type     help
diff --git a/util-linux/setpriv.c b/util-linux/setpriv.c
index 8918108..0f85428 100644
--- a/util-linux/setpriv.c
+++ b/util-linux/setpriv.c
@@ -13,36 +13,36 @@
 //config:	select PLATFORM_LINUX
 //config:	select LONG_OPTS
 //config:	help
-//config:	  Run a program with different Linux privilege settings.
-//config:	  Requires kernel >= 3.5
+//config:	Run a program with different Linux privilege settings.
+//config:	Requires kernel >= 3.5
 //config:
 //config:config FEATURE_SETPRIV_DUMP
 //config:	bool "Support dumping current privilege state"
 //config:	default y
 //config:	depends on SETPRIV
 //config:	help
-//config:	  Enables the "--dump" switch to print out the current privilege
-//config:	  state. This is helpful for diagnosing problems.
+//config:	Enables the "--dump" switch to print out the current privilege
+//config:	state. This is helpful for diagnosing problems.
 //config:
 //config:config FEATURE_SETPRIV_CAPABILITIES
 //config:	bool "Support capabilities"
 //config:	default y
 //config:	depends on SETPRIV
 //config:	help
-//config:	  Capabilities can be used to grant processes additional rights
-//config:	  without the necessity to always execute as the root user.
-//config:	  Enabling this option enables "--dump" to show information on
-//config:	  capabilities.
+//config:	Capabilities can be used to grant processes additional rights
+//config:	without the necessity to always execute as the root user.
+//config:	Enabling this option enables "--dump" to show information on
+//config:	capabilities.
 //config:
 //config:config FEATURE_SETPRIV_CAPABILITY_NAMES
 //config:	bool "Support capability names"
 //config:	default y
 //config:	depends on SETPRIV && FEATURE_SETPRIV_CAPABILITIES
 //config:	help
-//config:	  Capabilities can be either referenced via a human-readble name,
-//config:	  e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
-//config:	  this option allows using the human-readable names in addition to
-//config:	  the index-based names.
+//config:	Capabilities can be either referenced via a human-readble name,
+//config:	e.g. "net_admin", or using their index, e.g. "cap_12". Enabling
+//config:	this option allows using the human-readable names in addition to
+//config:	the index-based names.
 
 //applet:IF_SETPRIV(APPLET(setpriv, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/setsid.c b/util-linux/setsid.c
index 15a7c05..60cab2f 100644
--- a/util-linux/setsid.c
+++ b/util-linux/setsid.c
@@ -17,7 +17,7 @@
 //config:	bool "setsid (3.9 kb)"
 //config:	default y
 //config:	help
-//config:	  setsid runs a program in a new session
+//config:	setsid runs a program in a new session
 
 //applet:IF_SETSID(APPLET(setsid, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/swaponoff.c b/util-linux/swaponoff.c
index dc8dd9d..bda0687 100644
--- a/util-linux/swaponoff.c
+++ b/util-linux/swaponoff.c
@@ -11,27 +11,27 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Once you have created some swap space using 'mkswap', you also need
-//config:	  to enable your swap space with the 'swapon' utility. The 'swapoff'
-//config:	  utility is used, typically at system shutdown, to disable any swap
-//config:	  space. If you are not using any swap space, you can leave this
-//config:	  option disabled.
+//config:	Once you have created some swap space using 'mkswap', you also need
+//config:	to enable your swap space with the 'swapon' utility. The 'swapoff'
+//config:	utility is used, typically at system shutdown, to disable any swap
+//config:	space. If you are not using any swap space, you can leave this
+//config:	option disabled.
 //config:
 //config:config FEATURE_SWAPON_DISCARD
 //config:	bool "Support discard option -d"
 //config:	default y
 //config:	depends on SWAPON
 //config:	help
-//config:	  Enable support for discarding swap area blocks at swapon and/or as
-//config:	  the kernel frees them. This option enables both the -d option on
-//config:	  'swapon' and the 'discard' option for swap entries in /etc/fstab.
+//config:	Enable support for discarding swap area blocks at swapon and/or as
+//config:	the kernel frees them. This option enables both the -d option on
+//config:	'swapon' and the 'discard' option for swap entries in /etc/fstab.
 //config:
 //config:config FEATURE_SWAPON_PRI
 //config:	bool "Support priority option -p"
 //config:	default y
 //config:	depends on SWAPON
 //config:	help
-//config:	  Enable support for setting swap device priority in swapon.
+//config:	Enable support for setting swap device priority in swapon.
 //config:
 //config:config SWAPOFF
 //config:	bool "swapoff (4.3 kb)"
diff --git a/util-linux/switch_root.c b/util-linux/switch_root.c
index 92e385b..3270893 100644
--- a/util-linux/switch_root.c
+++ b/util-linux/switch_root.c
@@ -10,20 +10,20 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  The switch_root utility is used from initramfs to select a new
-//config:	  root device. Under initramfs, you have to use this instead of
-//config:	  pivot_root. (Stop reading here if you don't care why.)
+//config:	The switch_root utility is used from initramfs to select a new
+//config:	root device. Under initramfs, you have to use this instead of
+//config:	pivot_root. (Stop reading here if you don't care why.)
 //config:
-//config:	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-//config:	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-//config:	  or unmounted*, pivot_root will not work from initramfs. Instead,
-//config:	  switch_root deletes everything out of rootfs (including itself),
-//config:	  does a mount --move that overmounts rootfs with the new root, and
-//config:	  then execs the specified init program.
+//config:	Booting with initramfs extracts a gzipped cpio archive into rootfs
+//config:	(which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+//config:	or unmounted*, pivot_root will not work from initramfs. Instead,
+//config:	switch_root deletes everything out of rootfs (including itself),
+//config:	does a mount --move that overmounts rootfs with the new root, and
+//config:	then execs the specified init program.
 //config:
-//config:	  * Because the Linux kernel uses rootfs internally as the starting
-//config:	  and ending point for searching through the kernel's doubly linked
-//config:	  list of active mount points. That's why.
+//config:	* Because the Linux kernel uses rootfs internally as the starting
+//config:	and ending point for searching through the kernel's doubly linked
+//config:	list of active mount points. That's why.
 
 //applet:IF_SWITCH_ROOT(APPLET(switch_root, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/taskset.c b/util-linux/taskset.c
index 581b0d1..9957b1a 100644
--- a/util-linux/taskset.c
+++ b/util-linux/taskset.c
@@ -10,17 +10,17 @@
 //config:	bool "taskset (4.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Retrieve or set a processes's CPU affinity.
-//config:	  This requires sched_{g,s}etaffinity support in your libc.
+//config:	Retrieve or set a processes's CPU affinity.
+//config:	This requires sched_{g,s}etaffinity support in your libc.
 //config:
 //config:config FEATURE_TASKSET_FANCY
 //config:	bool "Fancy output"
 //config:	default y
 //config:	depends on TASKSET
 //config:	help
-//config:	  Needed for machines with more than 32-64 CPUs:
-//config:	  affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
-//config:	  in this case. Otherwise, it is limited to sizeof(long).
+//config:	Needed for machines with more than 32-64 CPUs:
+//config:	affinity parameter 0xHHHHHHHHHHHHHHHHHHHH can be arbitrarily long
+//config:	in this case. Otherwise, it is limited to sizeof(long).
 
 //applet:IF_TASKSET(APPLET(taskset, BB_DIR_USR_BIN, BB_SUID_DROP))
 //kbuild:lib-$(CONFIG_TASKSET) += taskset.o
diff --git a/util-linux/uevent.c b/util-linux/uevent.c
index cef93ad..252e8fb 100644
--- a/util-linux/uevent.c
+++ b/util-linux/uevent.c
@@ -8,8 +8,8 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  uevent is a netlink listener for kernel uevent notifications
-//config:	  sent via netlink. It is usually used for dynamic device creation.
+//config:	uevent is a netlink listener for kernel uevent notifications
+//config:	sent via netlink. It is usually used for dynamic device creation.
 
 //applet:IF_UEVENT(APPLET(uevent, BB_DIR_SBIN, BB_SUID_DROP))
 
diff --git a/util-linux/umount.c b/util-linux/umount.c
index f970f9f..31bf671 100644
--- a/util-linux/umount.c
+++ b/util-linux/umount.c
@@ -12,17 +12,17 @@
 //config:	default y
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  When you want to remove a mounted filesystem from its current mount
-//config:	  point, for example when you are shutting down the system, the
-//config:	  'umount' utility is the tool to use. If you enabled the 'mount'
-//config:	  utility, you almost certainly also want to enable 'umount'.
+//config:	When you want to remove a mounted filesystem from its current mount
+//config:	point, for example when you are shutting down the system, the
+//config:	'umount' utility is the tool to use. If you enabled the 'mount'
+//config:	utility, you almost certainly also want to enable 'umount'.
 //config:
 //config:config FEATURE_UMOUNT_ALL
 //config:	bool "Support option -a"
 //config:	default y
 //config:	depends on UMOUNT
 //config:	help
-//config:	  Support -a option to unmount all currently mounted filesystems.
+//config:	Support -a option to unmount all currently mounted filesystems.
 
 //applet:IF_UMOUNT(APPLET(umount, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/util-linux/unshare.c b/util-linux/unshare.c
index 892d3b6..e7b95c7 100644
--- a/util-linux/unshare.c
+++ b/util-linux/unshare.c
@@ -13,7 +13,7 @@
 //config:	select PLATFORM_LINUX
 //config:	select LONG_OPTS
 //config:	help
-//config:	  Run program with some namespaces unshared from parent.
+//config:	Run program with some namespaces unshared from parent.
 
 // needs LONG_OPTS: it is awkward to exclude code which handles --propagation
 // and --setgroups based on LONG_OPTS, so instead applet requires LONG_OPTS.
diff --git a/util-linux/volume_id/exfat.c b/util-linux/volume_id/exfat.c
index 7ed13a7..14bf9d6 100644
--- a/util-linux/volume_id/exfat.c
+++ b/util-linux/volume_id/exfat.c
@@ -25,9 +25,9 @@
 //config:	default y
 //config:	depends on VOLUMEID
 //config:	help
-//config:	  exFAT (extended FAT) is a proprietary file system designed especially
-//config:	  for flash drives. It has many features from NTFS, but with less
-//config:	  overhead. exFAT is used on most SDXC cards for consumer electronics.
+//config:	exFAT (extended FAT) is a proprietary file system designed especially
+//config:	for flash drives. It has many features from NTFS, but with less
+//config:	overhead. exFAT is used on most SDXC cards for consumer electronics.
 
 #include "volume_id_internal.h"
 
diff --git a/util-linux/volume_id/f2fs.c b/util-linux/volume_id/f2fs.c
index 1d3bdae..3027f17 100644
--- a/util-linux/volume_id/f2fs.c
+++ b/util-linux/volume_id/f2fs.c
@@ -13,10 +13,10 @@
 //config:	default y
 //config:	depends on VOLUMEID
 //config:	help
-//config:	  F2FS (aka Flash-Friendly File System) is a log-structured file system,
-//config:	  which is adapted to newer forms of storage. F2FS also remedies some
-//config:	  known issues of the older log structured file systems, such as high
-//config:	  cleaning overhead.
+//config:	F2FS (aka Flash-Friendly File System) is a log-structured file system,
+//config:	which is adapted to newer forms of storage. F2FS also remedies some
+//config:	known issues of the older log structured file systems, such as high
+//config:	cleaning overhead.
 
 #include "volume_id_internal.h"
 
diff --git a/util-linux/volume_id/nilfs.c b/util-linux/volume_id/nilfs.c
index ffe919f..9d6c57f 100644
--- a/util-linux/volume_id/nilfs.c
+++ b/util-linux/volume_id/nilfs.c
@@ -26,16 +26,16 @@
 //config:	default y
 //config:	depends on VOLUMEID
 //config:	help
-//config:	  NILFS is a New Implementation of a Log-Structured File System (LFS)
-//config:	  that supports continuous snapshots. This provides features like
-//config:	  versioning of the entire filesystem, restoration of files that
-//config:	  were deleted a few minutes ago. NILFS keeps consistency like
-//config:	  conventional LFS, so it provides quick recovery after system crashes.
+//config:	NILFS is a New Implementation of a Log-Structured File System (LFS)
+//config:	that supports continuous snapshots. This provides features like
+//config:	versioning of the entire filesystem, restoration of files that
+//config:	were deleted a few minutes ago. NILFS keeps consistency like
+//config:	conventional LFS, so it provides quick recovery after system crashes.
 //config:
-//config:	  The possible use of NILFS includes versioning, tamper detection,
-//config:	  SOX compliance logging, and so forth. It can serve as an alternative
-//config:	  filesystem for Linux desktop environment, or as a basis of advanced
-//config:	  storage appliances.
+//config:	The possible use of NILFS includes versioning, tamper detection,
+//config:	SOX compliance logging, and so forth. It can serve as an alternative
+//config:	filesystem for Linux desktop environment, or as a basis of advanced
+//config:	storage appliances.
 
 #include "volume_id_internal.h"
 
diff --git a/util-linux/volume_id/squashfs.c b/util-linux/volume_id/squashfs.c
index 6bba199..e3ffce3 100644
--- a/util-linux/volume_id/squashfs.c
+++ b/util-linux/volume_id/squashfs.c
@@ -13,10 +13,10 @@
 //config:	default y
 //config:	depends on VOLUMEID && FEATURE_BLKID_TYPE
 //config:	help
-//config:	  Squashfs is a compressed read-only filesystem for Linux. Squashfs is
-//config:	  intended for general read-only filesystem use and in constrained block
-//config:	  device/memory systems (e.g. embedded systems) where low overhead is
-//config:	  needed.
+//config:	Squashfs is a compressed read-only filesystem for Linux. Squashfs is
+//config:	intended for general read-only filesystem use and in constrained block
+//config:	device/memory systems (e.g. embedded systems) where low overhead is
+//config:	needed.
 
 #include "volume_id_internal.h"
 
diff --git a/util-linux/volume_id/ubifs.c b/util-linux/volume_id/ubifs.c
index 99b0aa8..7512b84 100644
--- a/util-linux/volume_id/ubifs.c
+++ b/util-linux/volume_id/ubifs.c
@@ -13,8 +13,8 @@
 //config:	default y
 //config:	depends on VOLUMEID
 //config:	help
-//config:	  UBIFS (Unsorted Block Image File System) is a file
-//config:	  system for use with raw flash memory media.
+//config:	UBIFS (Unsorted Block Image File System) is a file
+//config:	system for use with raw flash memory media.
 
 #include "volume_id_internal.h"
 
diff --git a/util-linux/wall.c b/util-linux/wall.c
index 4550f0b..e214d8c 100644
--- a/util-linux/wall.c
+++ b/util-linux/wall.c
@@ -11,7 +11,7 @@
 //config:	default y
 //config:	depends on FEATURE_UTMP
 //config:	help
-//config:	  Write a message to all users that are logged in.
+//config:	Write a message to all users that are logged in.
 
 /* Needs to be run by root or be suid root - needs to write to /dev/TTY: */
 //applet:IF_WALL(APPLET(wall, BB_DIR_USR_BIN, BB_SUID_REQUIRE))