remove defconfig. Now "make defconfig" simply uses defaults from Config.in

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

2 files changed, 86 insertions, 86 deletions

diff --git a/networking/Config.src b/networking/Config.src
index ce7166f..eb8dc1c 100644
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -7,7 +7,7 @@ menu "Networking Utilities"
 
 config FEATURE_IPV6
 	bool "Enable IPv6 support"
-	default n
+	default y
 	help
 	  Enable IPv6 support in busybox.
 	  This adds IPv6 support in the networking applets.
@@ -48,26 +48,26 @@ config VERBOSE_RESOLUTION_ERRORS
 
 config ARP
 	bool "arp"
-	default n
+	default y
 	help
 	  Manipulate the system ARP cache.
 
 config ARPING
 	bool "arping"
-	default n
+	default y
 	help
 	  Ping hosts by ARP packets.
 
 config BRCTL
 	bool "brctl"
-	default n
+	default y
 	help
 	  Manage ethernet bridges.
 	  Supports addbr/delbr and addif/delif.
 
 config FEATURE_BRCTL_FANCY
 	bool "Fancy options"
-	default n
+	default y
 	depends on BRCTL
 	help
 	  Add support for extended option like:
@@ -78,7 +78,7 @@ config FEATURE_BRCTL_FANCY
 
 config FEATURE_BRCTL_SHOW
 	bool "Support show, showmac and showstp"
-	default n
+	default y
 	depends on BRCTL && FEATURE_BRCTL_FANCY
 	help
 	  Add support for option which prints the current config:
@@ -86,19 +86,19 @@ config FEATURE_BRCTL_SHOW
 
 config DNSD
 	bool "dnsd"
-	default n
+	default y
 	help
 	  Small and static DNS server daemon.
 
 config ETHER_WAKE
 	bool "ether-wake"
-	default n
+	default y
 	help
 	  Send a magic packet to wake up sleeping machines.
 
 config FAKEIDENTD
 	bool "fakeidentd"
-	default n
+	default y
 	select FEATURE_SYSLOG
 	help
 	  fakeidentd listens on the ident port and returns a predefined
@@ -106,7 +106,7 @@ config FAKEIDENTD
 
 config FTPD
 	bool "ftpd"
-	default n
+	default y
 	help
 	  simple FTP daemon. You have to run it via inetd.
 
@@ -130,38 +130,38 @@ config FEATURE_FTPD_ACCEPT_BROKEN_LIST
 
 config FTPGET
 	bool "ftpget"
-	default n
+	default y
 	help
 	  Retrieve a remote file via FTP.
 
 config FTPPUT
 	bool "ftpput"
-	default n
+	default y
 	help
 	  Store a remote file via FTP.
 
 config FEATURE_FTPGETPUT_LONG_OPTIONS
 	bool "Enable long options in ftpget/ftpput"
-	default n
+	default y
 	depends on LONG_OPTS && (FTPGET || FTPPUT)
 	help
 	  Support long options for the ftpget/ftpput applet.
 
 config HOSTNAME
 	bool "hostname"
-	default n
+	default y
 	help
 	  Show or set the system's host name.
 
 config HTTPD
 	bool "httpd"
-	default n
+	default y
 	help
 	  Serve web pages via an HTTP server.
 
 config FEATURE_HTTPD_RANGES
 	bool "Support 'Ranges:' header"
-	default n
+	default y
 	depends on HTTPD
 	help
 	  Makes httpd emit "Accept-Ranges: bytes" header and understand
@@ -170,7 +170,7 @@ config FEATURE_HTTPD_RANGES
 
 config FEATURE_HTTPD_USE_SENDFILE
 	bool "Use sendfile system call"
-	default n
+	default y
 	depends on HTTPD
 	help
 	  When enabled, httpd will use the kernel sendfile() function
@@ -178,7 +178,7 @@ config FEATURE_HTTPD_USE_SENDFILE
 
 config FEATURE_HTTPD_SETUID
 	bool "Enable -u <user> option"
-	default n
+	default y
 	depends on HTTPD
 	help
 	  This option allows the server to run as a specific user
@@ -196,7 +196,7 @@ config FEATURE_HTTPD_BASIC_AUTH
 
 config FEATURE_HTTPD_AUTH_MD5
 	bool "Support MD5 crypted passwords for http Authentication"
-	default n
+	default y
 	depends on FEATURE_HTTPD_BASIC_AUTH
 	help
 	  Enables basic per URL authentication from /etc/httpd.conf
@@ -212,7 +212,7 @@ config FEATURE_HTTPD_CGI
 
 config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 	bool "Support for running scripts through an interpreter"
-	default n
+	default y
 	depends on FEATURE_HTTPD_CGI
 	help
 	  This option enables support for running scripts through an
@@ -223,7 +223,7 @@ config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 
 config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
 	bool "Set REMOTE_PORT environment variable for CGI"
-	default n
+	default y
 	depends on FEATURE_HTTPD_CGI
 	help
 	  Use of this option can assist scripts in generating
@@ -241,7 +241,7 @@ config FEATURE_HTTPD_ENCODE_URL_STR
 
 config FEATURE_HTTPD_ERROR_PAGES
 	bool "Support for custom error pages"
-	default n
+	default y
 	depends on HTTPD
 	help
 	  This option allows you to define custom error pages in
@@ -254,7 +254,7 @@ config FEATURE_HTTPD_ERROR_PAGES
 
 config FEATURE_HTTPD_PROXY
 	bool "Support for reverse proxy"
-	default n
+	default y
 	depends on HTTPD
 	help
 	  This option allows you to define URLs that will be forwarded
@@ -266,7 +266,7 @@ config FEATURE_HTTPD_PROXY
 
 config IFCONFIG
 	bool "ifconfig"
-	default n
+	default y
 	help
 	  Ifconfig is used to configure the kernel-resident network interfaces.
 
@@ -280,7 +280,7 @@ config FEATURE_IFCONFIG_STATUS
 
 config FEATURE_IFCONFIG_SLIP
 	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
-	default n
+	default y
 	depends on IFCONFIG
 	help
 	  Allow "keepalive" and "outfill" support for SLIP. If you're not
@@ -288,7 +288,7 @@ config FEATURE_IFCONFIG_SLIP
 
 config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
 	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
-	default n
+	default y
 	depends on IFCONFIG
 	help
 	  Allow the start address for shared memory, start address for I/O,
@@ -305,7 +305,7 @@ config FEATURE_IFCONFIG_HW
 
 config FEATURE_IFCONFIG_BROADCAST_PLUS
 	bool "Set the broadcast automatically"
-	default n
+	default y
 	depends on IFCONFIG
 	help
 	  Setting this will make ifconfig attempt to find the broadcast
@@ -313,20 +313,20 @@ config FEATURE_IFCONFIG_BROADCAST_PLUS
 
 config IFENSLAVE
 	bool "ifenslave"
-	default n
+	default y
 	help
 	  Userspace application to bind several interfaces
 	  to a logical interface (use with kernel bonding driver).
 
 config IFPLUGD
 	bool "ifplugd"
-	default n
+	default y
 	help
 	  Network interface plug detection daemon.
 
 config IFUPDOWN
 	bool "ifupdown"
-	default n
+	default y
 	help
 	  Activate or deactivate the specified interfaces. This applet makes
 	  use of either "ifconfig" and "route" or the "ip" command to actually
@@ -353,7 +353,7 @@ config IFUPDOWN_IFSTATE_PATH
 
 config FEATURE_IFUPDOWN_IP
 	bool "Use ip applet"
-	default n
+	default y
 	depends on IFUPDOWN
 	help
 	  Use the iproute "ip" command to implement "ifup" and "ifdown", rather
@@ -375,7 +375,7 @@ config FEATURE_IFUPDOWN_IP_BUILTIN
 
 config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
 	bool "Use busybox ifconfig and route applets"
-	default y
+	default n
 	depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
 	select IFCONFIG
 	select ROUTE
@@ -396,7 +396,7 @@ config FEATURE_IFUPDOWN_IPV4
 
 config FEATURE_IFUPDOWN_IPV6
 	bool "Support for IPv6"
-	default n
+	default y
 	depends on IFUPDOWN && FEATURE_IPV6
 	help
 	  If you need support for IPv6, turn this option on.
@@ -404,7 +404,7 @@ config FEATURE_IFUPDOWN_IPV6
 ### UNUSED
 ###config FEATURE_IFUPDOWN_IPX
 ###	bool "Support for IPX"
-###	default n
+###	default y
 ###	depends on IFUPDOWN
 ###	help
 ###	  If this option is selected you can use busybox to work with IPX
@@ -412,7 +412,7 @@ config FEATURE_IFUPDOWN_IPV6
 
 config FEATURE_IFUPDOWN_MAPPING
 	bool "Enable mapping support"
-	default n
+	default y
 	depends on IFUPDOWN
 	help
 	  This enables support for the "mapping" stanza, unless you have
@@ -430,7 +430,7 @@ config FEATURE_IFUPDOWN_EXTERNAL_DHCP
 
 config INETD
 	bool "inetd"
-	default n
+	default y
 	select FEATURE_SYSLOG
 	help
 	  Internet superserver daemon
@@ -472,7 +472,7 @@ config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
 
 config FEATURE_INETD_RPC
 	bool "Support RPC services"
-	default n
+	default y
 	depends on INETD
 	select FEATURE_HAVE_RPC
 	help
@@ -480,7 +480,7 @@ config FEATURE_INETD_RPC
 
 config IP
 	bool "ip"
-	default n
+	default y
 	help
 	  The "ip" applet is a TCP/IP interface configuration and routing
 	  utility. You generally don't need "ip" to use busybox with
@@ -509,21 +509,21 @@ config FEATURE_IP_ROUTE
 
 config FEATURE_IP_TUNNEL
 	bool "ip tunnel"
-	default n
+	default y
 	depends on IP
 	help
 	  Add support for tunneling commands to "ip".
 
 config FEATURE_IP_RULE
 	bool "ip rule"
-	default n
+	default y
 	depends on IP
 	help
 	  Add support for rule commands to "ip".
 
 config FEATURE_IP_SHORT_FORMS
 	bool "Support short forms of ip commands"
-	default n
+	default y
 	depends on IP
 	help
 	  Also support short-form of ip <OBJECT> commands:
@@ -573,7 +573,7 @@ config IPRULE
 
 config IPCALC
 	bool "ipcalc"
-	default n
+	default y
 	help
 	  ipcalc takes an IP address and netmask and calculates the
 	  resulting broadcast, network, and host range.
@@ -588,14 +588,14 @@ config FEATURE_IPCALC_FANCY
 
 config FEATURE_IPCALC_LONG_OPTIONS
 	bool "Enable long options"
-	default n
+	default y
 	depends on IPCALC && LONG_OPTS
 	help
 	  Support long options for the ipcalc applet.
 
 config NAMEIF
 	bool "nameif"
-	default n
+	default y
 	select FEATURE_SYSLOG
 	help
 	  nameif is used to rename network interface by its MAC address.
@@ -610,7 +610,7 @@ config NAMEIF
 
 config FEATURE_NAMEIF_EXTENDED
 	bool "Extended nameif"
-	default n
+	default y
 	depends on NAMEIF
 	help
 	  This extends the nameif syntax to support the bus_info and driver
@@ -623,21 +623,21 @@ config FEATURE_NAMEIF_EXTENDED
 
 config NC
 	bool "nc"
-	default n
+	default y
 	help
 	  A simple Unix utility which reads and writes data across network
 	  connections.
 
 config NC_SERVER
 	bool "Netcat server options (-l)"
-	default n
+	default y
 	depends on NC
 	help
 	  Allow netcat to act as a server.
 
 config NC_EXTRA
 	bool "Netcat extensions (-eiw and filename)"
-	default n
+	default y
 	depends on NC
 	help
 	  Add -e (support for executing the rest of the command line after
@@ -646,13 +646,13 @@ config NC_EXTRA
 
 config NETSTAT
 	bool "netstat"
-	default n
+	default y
 	help
 	  netstat prints information about the Linux networking subsystem.
 
 config FEATURE_NETSTAT_WIDE
 	bool "Enable wide netstat output"
-	default n
+	default y
 	depends on NETSTAT
 	help
 	  Add support for wide columns. Useful when displaying IPv6 addresses
@@ -660,7 +660,7 @@ config FEATURE_NETSTAT_WIDE
 
 config FEATURE_NETSTAT_PRG
 	bool "Enable PID/Program name output"
-	default n
+	default y
 	depends on NETSTAT
 	help
 	  Add support for -p flag to print out PID and program name.
@@ -668,13 +668,13 @@ config FEATURE_NETSTAT_PRG
 
 config NSLOOKUP
 	bool "nslookup"
-	default n
+	default y
 	help
 	  nslookup is a tool to query Internet name servers.
 
 config NTPD
 	bool "ntpd"
-	default n
+	default y
 	help
 	  The NTP client/server daemon.
 
@@ -688,14 +688,14 @@ config FEATURE_NTPD_SERVER
 
 config PING
 	bool "ping"
-	default n
+	default y
 	help
 	  ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
 	  elicit an ICMP ECHO_RESPONSE from a host or gateway.
 
 config PING6
 	bool "ping6"
-	default n
+	default y
 	depends on FEATURE_IPV6 && PING
 	help
 	  This will give you a ping that can talk IPv6.
@@ -710,26 +710,26 @@ config FEATURE_FANCY_PING
 
 config PSCAN
 	bool "pscan"
-	default n
+	default y
 	help
 	  Simple network port scanner.
 
 config ROUTE
 	bool "route"
-	default n
+	default y
 	help
 	  Route displays or manipulates the kernel's IP routing tables.
 
 config SLATTACH
 	bool "slattach"
-	default n
+	default y
 	help
 	  slattach is a small utility to attach network interfaces to serial
 	  lines.
 
 #config TC
 #	bool "tc"
-#	default n
+#	default y
 #	help
 #	  show / manipulate traffic control settings
 #
@@ -739,14 +739,14 @@ config SLATTACH
 
 config TCPSVD
 	bool "tcpsvd"
-	default n
+	default y
 	help
 	  tcpsvd listens on a TCP port and runs a program for each new
 	  connection.
 
 config TELNET
 	bool "telnet"
-	default n
+	default y
 	help
 	  Telnet is an interface to the TELNET protocol, but is also commonly
 	  used to test other simple protocols.
@@ -772,7 +772,7 @@ config FEATURE_TELNET_AUTOLOGIN
 
 config TELNETD
 	bool "telnetd"
-	default n
+	default y
 	select FEATURE_SYSLOG
 	help
 	  A daemon for the TELNET protocol, allowing you to log onto the host
@@ -815,14 +815,14 @@ config TELNETD
 
 config FEATURE_TELNETD_STANDALONE
 	bool "Support standalone telnetd (not inetd only)"
-	default n
+	default y
 	depends on TELNETD
 	help
 	  Selecting this will make telnetd able to run standalone.
 
 config FEATURE_TELNETD_INETD_WAIT
 	bool "Support -w SEC option (inetd wait mode)"
-	default n
+	default y
 	depends on FEATURE_TELNETD_STANDALONE
 	help
 	  This option allows you to run telnetd in "inet wait" mode.
@@ -843,7 +843,7 @@ config FEATURE_TELNETD_INETD_WAIT
 
 config TFTP
 	bool "tftp"
-	default n
+	default y
 	help
 	  This enables the Trivial File Transfer Protocol client program. TFTP
 	  is usually used for simple, small transfers such as a root image
@@ -851,7 +851,7 @@ config TFTP
 
 config TFTPD
 	bool "tftpd"
-	default n
+	default y
 	help
 	  This enables the Trivial File Transfer Protocol server program.
 	  It expects that stdin is a datagram socket and a packet
@@ -882,7 +882,7 @@ config FEATURE_TFTP_PUT
 
 config FEATURE_TFTP_BLOCKSIZE
 	bool "Enable 'blksize' and 'tsize' protocol options"
-	default n
+	default y
 	depends on TFTP || TFTPD
 	help
 	  Allow tftp to specify block size, and tftpd to understand
@@ -890,7 +890,7 @@ config FEATURE_TFTP_BLOCKSIZE
 
 config FEATURE_TFTP_PROGRESS_BAR
 	bool "Enable tftp progress meter"
-	default n
+	default y
 	depends on TFTP && FEATURE_TFTP_BLOCKSIZE
 	help
 	  Show progress bar.
@@ -905,20 +905,20 @@ config TFTP_DEBUG
 
 config TRACEROUTE
 	bool "traceroute"
-	default n
+	default y
 	help
 	  Utility to trace the route of IP packets.
 
 config TRACEROUTE6
 	bool "traceroute6"
-	default n
+	default y
 	depends on FEATURE_IPV6 && TRACEROUTE
 	help
 	  Utility to trace the route of IPv6 packets.
 
 config FEATURE_TRACEROUTE_VERBOSE
 	bool "Enable verbose output"
-	default n
+	default y
 	depends on TRACEROUTE
 	help
 	  Add some verbosity to traceroute. This includes among other things
@@ -941,13 +941,13 @@ config FEATURE_TRACEROUTE_USE_ICMP
 
 config TUNCTL
 	bool "tunctl"
-	default n
+	default y
 	help
 	  tunctl creates or deletes tun devices.
 
 config FEATURE_TUNCTL_UG
 	bool "Support owner:group assignment"
-	default n
+	default y
 	depends on TUNCTL
 	help
 	  Allow to specify owner and group of newly created interface.
@@ -966,20 +966,20 @@ config IFUPDOWN_UDHCPC_CMD_OPTIONS
 
 config UDPSVD
 	bool "udpsvd"
-	default n
+	default y
 	help
 	  udpsvd listens on an UDP port and runs a program for each new
 	  connection.
 
 config VCONFIG
 	bool "vconfig"
-	default n
+	default y
 	help
 	  Creates, removes, and configures VLAN interfaces
 
 config WGET
 	bool "wget"
-	default n
+	default y
 	help
 	  wget is a utility for non-interactive download of files from HTTP,
 	  HTTPS, and FTP servers.
@@ -1000,14 +1000,14 @@ config FEATURE_WGET_AUTHENTICATION
 
 config FEATURE_WGET_LONG_OPTIONS
 	bool "Enable long options"
-	default n
+	default y
 	depends on WGET && LONG_OPTS
 	help
 	  Support long options for the wget applet.
 
 config ZCIP
 	bool "zcip"
-	default n
+	default y
 	select FEATURE_SYSLOG
 	help
 	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src
index 34adf35..f5840a9 100644
--- a/networking/udhcp/Config.src
+++ b/networking/udhcp/Config.src
@@ -5,14 +5,14 @@
 
 config UDHCPD
 	bool "udhcp server (udhcpd)"
-	default n
+	default y
 	help
 	  udhcpd is a DHCP server geared primarily toward embedded systems,
 	  while striving to be fully functional and RFC compliant.
 
 config DHCPRELAY
 	bool "dhcprelay"
-	default n
+	default y
 	depends on UDHCPD
 	help
 	  dhcprelay listens for dhcp requests on one or more interfaces
@@ -21,7 +21,7 @@ config DHCPRELAY
 
 config DUMPLEASES
 	bool "Lease display utility (dumpleases)"
-	default n
+	default y
 	depends on UDHCPD
 	help
 	  dumpleases displays the leases written out by the udhcpd server.
@@ -30,7 +30,7 @@ config DUMPLEASES
 
 config FEATURE_UDHCPD_WRITE_LEASES_EARLY
 	bool "Rewrite the lease file at every new acknowledge"
-	default n
+	default y
 	depends on UDHCPD
 	help
 	  If selected, udhcpd will write a new file with leases every
@@ -48,7 +48,7 @@ config DHCPD_LEASES_FILE
 
 config UDHCPC
 	bool "udhcp client (udhcpc)"
-	default n
+	default y
 	help
 	  udhcpc is a DHCP client geared primarily toward embedded systems,
 	  while striving to be fully functional and RFC compliant.
@@ -68,7 +68,7 @@ config FEATURE_UDHCPC_ARPING
 
 config FEATURE_UDHCP_PORT
 	bool "Enable '-P port' option for udhcpd and udhcpc"
-	default n
+	default y
 	depends on UDHCPD || UDHCPC
 	help
 	  At the cost of ~300 bytes, enables -P port option.
@@ -76,7 +76,7 @@ config FEATURE_UDHCP_PORT
 
 config UDHCP_DEBUG
 	int "Maximum verbosity level for udhcp applets (0..9)"
-	default 0
+	default 9
 	range 0 9
 	depends on UDHCPD || UDHCPC || DHCPRELAY
 	help
@@ -88,7 +88,7 @@ config UDHCP_DEBUG
 
 config FEATURE_UDHCP_RFC3397
 	bool "Support for RFC3397 domain search (experimental)"
-	default n
+	default y
 	depends on UDHCPD || UDHCPC
 	help
 	  If selected, both client and server will support passing of domain