remove files not related to busybox

1 files changed, 0 insertions, 116 deletions

diff --git a/networking/udhcp/samples/udhcpd.conf b/networking/udhcp/samples/udhcpd.conf
deleted file mode 100644
index 00105b3..0000000
--- a/networking/udhcp/samples/udhcpd.conf
+++ /dev/null
@@ -1,116 +0,0 @@
-# Sample udhcpd configuration file (/etc/udhcpd.conf)
-
-# The start and end of the IP lease block
-
-start 		192.168.0.20	#default: 192.168.0.20
-end		192.168.0.254	#default: 192.168.0.254
-
-
-# The interface that udhcpd will use
-
-interface	eth0		#default: eth0
-
-
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
-
-#max_leases	254		#default: 254
-
-
-# If remaining is true (default), udhcpd will store the time
-# remaining for each lease in the udhcpd leases file. This is
-# for embedded systems that cannot keep time between reboots.
-# If you set remaining to no, the absolute time that the lease
-# expires at will be stored in the dhcpd.leases file.
-
-#remaining	yes		#default: yes
-
-
-# The time period at which udhcpd will write out a dhcpd.leases
-# file. If this is 0, udhcpd will never automatically write a
-# lease file. (specified in seconds)
-
-#auto_time	7200		#default: 7200 (2 hours)
-
-
-# The amount of time that an IP will be reserved (leased) for if a
-# DHCP decline message is received (seconds).
-
-#decline_time	3600		#default: 3600 (1 hour)
-
-
-# The amount of time that an IP will be reserved (leased) for if an
-# ARP conflct occurs. (seconds
-
-#conflict_time	3600		#default: 3600 (1 hour)
-
-
-# How long an offered address is reserved (leased) in seconds
-
-#offer_time	60		#default: 60 (1 minute)
-
-# If a lease to be given is below this value, the full lease time is
-# instead used (seconds).
-
-#min_lease	60		#defult: 60
-
-
-# The location of the leases file
-
-#lease_file	/var/lib/misc/udhcpd.leases	#defualt: /var/lib/misc/udhcpd.leases
-
-# The location of the pid file
-#pidfile	/var/run/udhcpd.pid	#default: /var/run/udhcpd.pid
-
-# Everytime udhcpd writes a leases file, the below script will be called.
-# Useful for writing the lease file to flash every few hours.
-
-#notify_file				#default: (no script)
-
-#notify_file	dumpleases 	# <--- usefull for debugging
-
-# The following are bootp specific options, setable by udhcpd.
-
-#siaddr		192.168.0.22		#default: 0.0.0.0
-
-#sname		zorak			#default: (none)
-
-#boot_file	/var/nfs_root		#default: (none)
-
-# The remainer of options are DHCP options and can be specifed with the
-# keyword 'opt' or 'option'. If an option can take multiple items, such
-# as the dns option, they can be listed on the same line, or multiple
-# lines. The only option with a default is 'lease'.
-
-#Examles
-opt	dns	192.168.10.2 192.168.10.10
-option	subnet	255.255.255.0
-opt	router	192.168.10.2
-opt	wins	192.168.10.10
-option	dns	129.219.13.81	# appened to above DNS servers for a total of 3
-option	domain	local
-option	lease	864000		# 10 days of seconds
-
-
-# Currently supported options, for more info, see options.c
-#opt subnet
-#opt timezone
-#opt router
-#opt timesvr
-#opt namesvr
-#opt dns
-#opt logsvr
-#opt cookiesvr
-#opt lprsvr
-#opt bootsize
-#opt domain
-#opt swapsvr
-#opt rootpath
-#opt ipttl
-#opt mtu
-#opt broadcast
-#opt wins
-#opt lease
-#opt ntpsrv
-#opt tftp
-#opt bootfile