summaryrefslogtreecommitdiff
path: root/examples
diff options
context:
space:
mode:
authorDenys Vlasenko2009-06-17 13:22:26 +0200
committerDenys Vlasenko2009-06-17 13:22:26 +0200
commit2b0e95780863da44f6a9244699ece8620a599e19 (patch)
tree5c2dd36f670be7d613a4ec99f127d73fabfdf5cb /examples
parent4945ed32d7dc3e138a7b3776a868676085174dab (diff)
downloadbusybox-2b0e95780863da44f6a9244699ece8620a599e19.zip
busybox-2b0e95780863da44f6a9244699ece8620a599e19.tar.gz
examples/udhcp/udhcpd.conf: update
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Diffstat (limited to 'examples')
-rw-r--r--examples/udhcp/udhcpd.conf95
1 files changed, 31 insertions, 64 deletions
diff --git a/examples/udhcp/udhcpd.conf b/examples/udhcp/udhcpd.conf
index 8c9a968..6550cab 100644
--- a/examples/udhcp/udhcpd.conf
+++ b/examples/udhcp/udhcpd.conf
@@ -1,88 +1,59 @@
# Sample udhcpd configuration file (/etc/udhcpd.conf)
+# Values shown are defaults
# The start and end of the IP lease block
-
-start 192.168.0.20 #default: 192.168.0.20
-end 192.168.0.254 #default: 192.168.0.254
-
+start 192.168.0.20
+end 192.168.0.254
# The interface that udhcpd will use
+interface eth0
-interface eth0 #default: eth0
-
-
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
-
-#max_leases 254 #default: 254
-
-
-# If remaining is true (default), udhcpd will store the time
-# remaining for each lease in the udhcpd leases file. This is
-# for embedded systems that cannot keep time between reboots.
-# If you set remaining to no, the absolute time that the lease
-# expires at will be stored in the dhcpd.leases file.
-
-#remaining yes #default: yes
-
+# The maximim number of leases (includes addresses reserved
+# by OFFER's, DECLINE's, and ARP conficts). Will be corrected
+# if it's bigger than IP lease block, but it ok to make it
+# smaller than lease block.
+#max_leases 254
# The time period at which udhcpd will write out a dhcpd.leases
# file. If this is 0, udhcpd will never automatically write a
-# lease file. (specified in seconds)
-
-#auto_time 7200 #default: 7200 (2 hours)
-
-
-# The amount of time that an IP will be reserved (leased) for if a
-# DHCP decline message is received (seconds).
-
-#decline_time 3600 #default: 3600 (1 hour)
-
-
-# The amount of time that an IP will be reserved (leased) for if an
-# ARP conflct occurs. (seconds
+# lease file. Specified in seconds.
+#auto_time 7200
-#conflict_time 3600 #default: 3600 (1 hour)
+# The amount of time that an IP will be reserved (leased to nobody)
+# if a DHCP decline message is received (seconds).
+#decline_time 3600
+# The amount of time that an IP will be reserved
+# if an ARP conflct occurs (seconds).
+#conflict_time 3600
-# How long an offered address is reserved (leased) in seconds
-
-#offer_time 60 #default: 60 (1 minute)
-
-# If a lease to be given is below this value, the full lease time is
-# instead used (seconds).
-
-#min_lease 60 #defult: 60
+# How long an offered address is reserved (seconds).
+#offer_time 60
+# If client asks for lease below this value, it will be rounded up
+# to this value (seconds).
+#min_lease 60
# The location of the leases file
-
-#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
+#lease_file /var/lib/misc/udhcpd.leases
# The location of the pid file
-#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
+#pidfile /var/run/udhcpd.pid
# Everytime udhcpd writes a leases file, the below script will be called.
-# Useful for writing the lease file to flash every few hours.
-
-#notify_file #default: (no script)
-
-#notify_file dumpleases # <--- useful for debugging
-
-# The following are bootp specific options, setable by udhcpd.
+#notify_file # default: no script
+#notify_file dumpleases # useful for debugging
+# The following are bootp specific options, settable by udhcpd.
#siaddr 192.168.0.22 #default: 0.0.0.0
-
-#sname zorak #default: (none)
-
-#boot_file /var/nfs_root #default: (none)
+#sname zorak #default: none
+#boot_file /var/nfs_root #default: none
# The remainer of options are DHCP options and can be specifed with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.
-
-#Examles
+# Examples:
opt dns 192.168.10.2 192.168.10.10
option subnet 255.255.255.0
opt router 192.168.10.2
@@ -91,8 +62,7 @@ option dns 129.219.13.81 # appened to above DNS servers for a total of 3
option domain local
option lease 864000 # 10 days of seconds
-
-# Currently supported options, for more info, see options.c
+# Currently supported options (for more info, see options.c):
#opt subnet
#opt timezone
#opt router
@@ -115,9 +85,6 @@ option lease 864000 # 10 days of seconds
#opt tftp
#opt bootfile
-
# Static leases map
#static_lease 00:60:08:11:CE:4E 192.168.0.54
#static_lease 00:60:08:11:CE:3E 192.168.0.44
-
-