config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

82 files changed, 245 insertions, 245 deletions

diff --git a/coreutils/Config.src b/coreutils/Config.src
index 1d2fea1..7a8a3a6 100644
--- a/coreutils/Config.src
+++ b/coreutils/Config.src
@@ -13,9 +13,9 @@ config FEATURE_VERBOSE
 	bool "Support verbose options (usually -v) for various applets"
 	default y
 	help
-	  Enable cp -v, rm -v and similar messages.
-	  Also enables long option (--verbose) if it exists.
-	  Without this option, -v is accepted but ignored.
+	Enable cp -v, rm -v and similar messages.
+	Also enables long option (--verbose) if it exists.
+	Without this option, -v is accepted but ignored.
 
 comment "Common options for cp and mv"
 	depends on CP || MV
@@ -25,7 +25,7 @@ config FEATURE_PRESERVE_HARDLINKS
 	default y
 	depends on CP || MV
 	help
-	  Allow cp and mv to preserve hard links.
+	Allow cp and mv to preserve hard links.
 
 comment "Common options for df, du, ls"
 	depends on DF || DU || LS
@@ -35,6 +35,6 @@ config FEATURE_HUMAN_READABLE
 	default y
 	depends on DF || DU || LS
 	help
-	  Allow df, du, and ls to have human readable output.
+	Allow df, du, and ls to have human readable output.
 
 endmenu
diff --git a/coreutils/basename.c b/coreutils/basename.c
index 6d82158..481cdce 100644
--- a/coreutils/basename.c
+++ b/coreutils/basename.c
@@ -18,9 +18,9 @@
 //config:	bool "basename (371 bytes)"
 //config:	default y
 //config:	help
-//config:	  basename is used to strip the directory and suffix from filenames,
-//config:	  leaving just the filename itself. Enable this option if you wish
-//config:	  to enable the 'basename' utility.
+//config:	basename is used to strip the directory and suffix from filenames,
+//config:	leaving just the filename itself. Enable this option if you wish
+//config:	to enable the 'basename' utility.
 
 //applet:IF_BASENAME(APPLET_NOFORK(basename, basename, BB_DIR_USR_BIN, BB_SUID_DROP, basename))
 
diff --git a/coreutils/cat.c b/coreutils/cat.c
index 41bef8f..3902545 100644
--- a/coreutils/cat.c
+++ b/coreutils/cat.c
@@ -10,22 +10,22 @@
 //config:	bool "cat (5.6 kb)"
 //config:	default y
 //config:	help
-//config:	  cat is used to concatenate files and print them to the standard
-//config:	  output. Enable this option if you wish to enable the 'cat' utility.
+//config:	cat is used to concatenate files and print them to the standard
+//config:	output. Enable this option if you wish to enable the 'cat' utility.
 //config:
 //config:config FEATURE_CATN
 //config:	bool "Enable -n and -b options"
 //config:	default y
 //config:	depends on CAT
 //config:	help
-//config:	  -n numbers all output lines while -b numbers nonempty output lines.
+//config:	-n numbers all output lines while -b numbers nonempty output lines.
 //config:
 //config:config FEATURE_CATV
 //config:	bool "cat -v[etA]"
 //config:	default y
 //config:	depends on CAT
 //config:	help
-//config:	  Display nonprinting characters as escape sequences
+//config:	Display nonprinting characters as escape sequences
 
 //applet:IF_CAT(APPLET(cat, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/chgrp.c b/coreutils/chgrp.c
index 834346b..27a0edf 100644
--- a/coreutils/chgrp.c
+++ b/coreutils/chgrp.c
@@ -10,7 +10,7 @@
 //config:	bool "chgrp (7.2 kb)"
 //config:	default y
 //config:	help
-//config:	  chgrp is used to change the group ownership of files.
+//config:	chgrp is used to change the group ownership of files.
 
 //applet:IF_CHGRP(APPLET_NOEXEC(chgrp, chgrp, BB_DIR_BIN, BB_SUID_DROP, chgrp))
 
diff --git a/coreutils/chmod.c b/coreutils/chmod.c
index ec075f7..2174334 100644
--- a/coreutils/chmod.c
+++ b/coreutils/chmod.c
@@ -13,7 +13,7 @@
 //config:	bool "chmod (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  chmod is used to change the access permission of files.
+//config:	chmod is used to change the access permission of files.
 
 //applet:IF_CHMOD(APPLET_NOEXEC(chmod, chmod, BB_DIR_BIN, BB_SUID_DROP, chmod))
 
diff --git a/coreutils/chown.c b/coreutils/chown.c
index 5c04bc3..1bfc725 100644
--- a/coreutils/chown.c
+++ b/coreutils/chown.c
@@ -10,8 +10,8 @@
 //config:	bool "chown (7.2 kb)"
 //config:	default y
 //config:	help
-//config:	  chown is used to change the user and/or group ownership
-//config:	  of files.
+//config:	chown is used to change the user and/or group ownership
+//config:	of files.
 //config:
 //config:config FEATURE_CHOWN_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/chroot.c b/coreutils/chroot.c
index 6fa3a3f..44a587f 100644
--- a/coreutils/chroot.c
+++ b/coreutils/chroot.c
@@ -10,8 +10,8 @@
 //config:	bool "chroot (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  chroot is used to change the root directory and run a command.
-//config:	  The default command is `/bin/sh'.
+//config:	chroot is used to change the root directory and run a command.
+//config:	The default command is `/bin/sh'.
 
 //applet:IF_CHROOT(APPLET(chroot, BB_DIR_USR_SBIN, BB_SUID_DROP))
 
diff --git a/coreutils/cksum.c b/coreutils/cksum.c
index dce17d9..c0cf65d 100644
--- a/coreutils/cksum.c
+++ b/coreutils/cksum.c
@@ -10,7 +10,7 @@
 //config:	bool "cksum (4.2 kb)"
 //config:	default y
 //config:	help
-//config:	  cksum is used to calculate the CRC32 checksum of a file.
+//config:	cksum is used to calculate the CRC32 checksum of a file.
 
 //applet:IF_CKSUM(APPLET_NOEXEC(cksum, cksum, BB_DIR_USR_BIN, BB_SUID_DROP, cksum))
 
diff --git a/coreutils/comm.c b/coreutils/comm.c
index 8f9dcde..5be1146 100644
--- a/coreutils/comm.c
+++ b/coreutils/comm.c
@@ -10,8 +10,8 @@
 //config:	bool "comm (3.9 kb)"
 //config:	default y
 //config:	help
-//config:	  comm is used to compare two files line by line and return
-//config:	  a three-column output.
+//config:	comm is used to compare two files line by line and return
+//config:	a three-column output.
 
 //applet:IF_COMM(APPLET(comm, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/cp.c b/coreutils/cp.c
index 726859c..092e395 100644
--- a/coreutils/cp.c
+++ b/coreutils/cp.c
@@ -15,15 +15,15 @@
 //config:	bool "cp (9.7 kb)"
 //config:	default y
 //config:	help
-//config:	  cp is used to copy files and directories.
+//config:	cp is used to copy files and directories.
 //config:
 //config:config FEATURE_CP_LONG_OPTIONS
 //config:	bool "Enable long options"
 //config:	default y
 //config:	depends on CP && LONG_OPTS
 //config:	help
-//config:	  Enable long options.
-//config:	  Also add support for --parents option.
+//config:	Enable long options.
+//config:	Also add support for --parents option.
 
 //applet:IF_CP(APPLET_NOEXEC(cp, cp, BB_DIR_BIN, BB_SUID_DROP, cp))
 
diff --git a/coreutils/cut.c b/coreutils/cut.c
index 2338702..6578ce8 100644
--- a/coreutils/cut.c
+++ b/coreutils/cut.c
@@ -12,8 +12,8 @@
 //config:	bool "cut (5.3 kb)"
 //config:	default y
 //config:	help
-//config:	  cut is used to print selected parts of lines from
-//config:	  each file to stdout.
+//config:	cut is used to print selected parts of lines from
+//config:	each file to stdout.
 
 //applet:IF_CUT(APPLET_NOEXEC(cut, cut, BB_DIR_USR_BIN, BB_SUID_DROP, cut))
 
diff --git a/coreutils/date.c b/coreutils/date.c
index c658d00..0fb9f1f 100644
--- a/coreutils/date.c
+++ b/coreutils/date.c
@@ -22,16 +22,16 @@
 //config:	bool "date (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  date is used to set the system date or display the
-//config:	  current time in the given format.
+//config:	date is used to set the system date or display the
+//config:	current time in the given format.
 //config:
 //config:config FEATURE_DATE_ISOFMT
 //config:	bool "Enable ISO date format output (-I)"
 //config:	default y
 //config:	depends on DATE
 //config:	help
-//config:	  Enable option (-I) to output an ISO-8601 compliant
-//config:	  date/time string.
+//config:	Enable option (-I) to output an ISO-8601 compliant
+//config:	date/time string.
 //config:
 //config:# defaults to "no": stat's nanosecond field is a bit non-portable
 //config:config FEATURE_DATE_NANO
@@ -40,23 +40,23 @@
 //config:	depends on DATE  # syscall(__NR_clock_gettime)
 //config:	select PLATFORM_LINUX
 //config:	help
-//config:	  Support %[num]N format specifier. Adds ~250 bytes of code.
+//config:	Support %[num]N format specifier. Adds ~250 bytes of code.
 //config:
 //config:config FEATURE_DATE_COMPAT
 //config:	bool "Support weird 'date MMDDhhmm[[YY]YY][.ss]' format"
 //config:	default y
 //config:	depends on DATE
 //config:	help
-//config:	  System time can be set by 'date -s DATE' and simply 'date DATE',
-//config:	  but formats of DATE string are different. 'date DATE' accepts
-//config:	  a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
-//config:	  unnatural placement of year between minutes and seconds.
-//config:	  date -s (and other commands like touch -d) use more sensible
-//config:	  formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
+//config:	System time can be set by 'date -s DATE' and simply 'date DATE',
+//config:	but formats of DATE string are different. 'date DATE' accepts
+//config:	a rather weird MMDDhhmm[[YY]YY][.ss] format with completely
+//config:	unnatural placement of year between minutes and seconds.
+//config:	date -s (and other commands like touch -d) use more sensible
+//config:	formats (for one, ISO format YYYY-MM-DD hh:mm:ss.ssssss).
 //config:
-//config:	  With this option off, 'date DATE' is 'date -s DATE' support
-//config:	  the same format. With it on, 'date DATE' additionally supports
-//config:	  MMDDhhmm[[YY]YY][.ss] format.
+//config:	With this option off, 'date DATE' is 'date -s DATE' support
+//config:	the same format. With it on, 'date DATE' additionally supports
+//config:	MMDDhhmm[[YY]YY][.ss] format.
 
 //applet:IF_DATE(APPLET(date, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/dd.c b/coreutils/dd.c
index 0150aff..43545c0 100644
--- a/coreutils/dd.c
+++ b/coreutils/dd.c
@@ -10,46 +10,46 @@
 //config:	bool "dd (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  dd copies a file (from standard input to standard output,
-//config:	  by default) using specific input and output blocksizes,
-//config:	  while optionally performing conversions on it.
+//config:	dd copies a file (from standard input to standard output,
+//config:	by default) using specific input and output blocksizes,
+//config:	while optionally performing conversions on it.
 //config:
 //config:config FEATURE_DD_SIGNAL_HANDLING
 //config:	bool "Enable signal handling for status reporting"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Sending a SIGUSR1 signal to a running `dd' process makes it
-//config:	  print to standard error the number of records read and written
-//config:	  so far, then to resume copying.
+//config:	Sending a SIGUSR1 signal to a running `dd' process makes it
+//config:	print to standard error the number of records read and written
+//config:	so far, then to resume copying.
 //config:
-//config:	  $ dd if=/dev/zero of=/dev/null &
-//config:	  $ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
-//config:	  10899206+0 records in
-//config:	  10899206+0 records out
+//config:	$ dd if=/dev/zero of=/dev/null &
+//config:	$ pid=$!; kill -USR1 $pid; sleep 1; kill $pid
+//config:	10899206+0 records in
+//config:	10899206+0 records out
 //config:
 //config:config FEATURE_DD_THIRD_STATUS_LINE
 //config:	bool "Enable the third status line upon signal"
 //config:	default y
 //config:	depends on DD && FEATURE_DD_SIGNAL_HANDLING
 //config:	help
-//config:	  Displays a coreutils-like third status line with transferred bytes,
-//config:	  elapsed time and speed.
+//config:	Displays a coreutils-like third status line with transferred bytes,
+//config:	elapsed time and speed.
 //config:
 //config:config FEATURE_DD_IBS_OBS
 //config:	bool "Enable ibs, obs and conv options"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Enable support for writing a certain number of bytes in and out,
-//config:	  at a time, and performing conversions on the data stream.
+//config:	Enable support for writing a certain number of bytes in and out,
+//config:	at a time, and performing conversions on the data stream.
 //config:
 //config:config FEATURE_DD_STATUS
 //config:	bool "Enable status display options"
 //config:	default y
 //config:	depends on DD
 //config:	help
-//config:	  Enable support for status=noxfer/none option.
+//config:	Enable support for status=noxfer/none option.
 
 //applet:IF_DD(APPLET_NOEXEC(dd, dd, BB_DIR_BIN, BB_SUID_DROP, dd))
 
diff --git a/coreutils/df.c b/coreutils/df.c
index 900c57e..27dd2b5 100644
--- a/coreutils/df.c
+++ b/coreutils/df.c
@@ -21,17 +21,17 @@
 //config:	bool "df (7.5 kb)"
 //config:	default y
 //config:	help
-//config:	  df reports the amount of disk space used and available
-//config:	  on filesystems.
+//config:	df reports the amount of disk space used and available
+//config:	on filesystems.
 //config:
 //config:config FEATURE_DF_FANCY
 //config:	bool "Enable -a, -i, -B"
 //config:	default y
 //config:	depends on DF
 //config:	help
-//config:	  -a Show all filesystems
-//config:	  -i Inodes
-//config:	  -B <SIZE> Blocksize
+//config:	-a Show all filesystems
+//config:	-i Inodes
+//config:	-B <SIZE> Blocksize
 
 //applet:IF_DF(APPLET(df, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/dirname.c b/coreutils/dirname.c
index 7fa3136..511267b 100644
--- a/coreutils/dirname.c
+++ b/coreutils/dirname.c
@@ -10,8 +10,8 @@
 //config:	bool "dirname (289 bytes)"
 //config:	default y
 //config:	help
-//config:	  dirname is used to strip a non-directory suffix from
-//config:	  a file name.
+//config:	dirname is used to strip a non-directory suffix from
+//config:	a file name.
 
 //applet:IF_DIRNAME(APPLET_NOFORK(dirname, dirname, BB_DIR_USR_BIN, BB_SUID_DROP, dirname))
 
diff --git a/coreutils/dos2unix.c b/coreutils/dos2unix.c
index e595bf5..a3d0080 100644
--- a/coreutils/dos2unix.c
+++ b/coreutils/dos2unix.c
@@ -15,15 +15,15 @@
 //config:	bool "dos2unix (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  dos2unix is used to convert a text file from DOS format to
-//config:	  UNIX format, and vice versa.
+//config:	dos2unix is used to convert a text file from DOS format to
+//config:	UNIX format, and vice versa.
 //config:
 //config:config UNIX2DOS
 //config:	bool "unix2dos (5.1 kb)"
 //config:	default y
 //config:	help
-//config:	  unix2dos is used to convert a text file from UNIX format to
-//config:	  DOS format, and vice versa.
+//config:	unix2dos is used to convert a text file from UNIX format to
+//config:	DOS format, and vice versa.
 
 //applet:IF_DOS2UNIX(APPLET_NOEXEC(dos2unix, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, dos2unix))
 //applet:IF_UNIX2DOS(APPLET_NOEXEC(unix2dos, dos2unix, BB_DIR_USR_BIN, BB_SUID_DROP, unix2dos))
diff --git a/coreutils/du.c b/coreutils/du.c
index 03e31a0..947c46e 100644
--- a/coreutils/du.c
+++ b/coreutils/du.c
@@ -22,15 +22,15 @@
 //config:	bool "du (default blocksize of 512 bytes)"
 //config:	default y
 //config:	help
-//config:	  du is used to report the amount of disk space used
-//config:	  for specified files.
+//config:	du is used to report the amount of disk space used
+//config:	for specified files.
 //config:
 //config:config FEATURE_DU_DEFAULT_BLOCKSIZE_1K
 //config:	bool "Use a default blocksize of 1024 bytes (1K)"
 //config:	default y
 //config:	depends on DU
 //config:	help
-//config:	  Use a blocksize of (1K) instead of the default 512b.
+//config:	Use a blocksize of (1K) instead of the default 512b.
 
 //applet:IF_DU(APPLET(du, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/echo.c b/coreutils/echo.c
index a7e4ca9..af33319 100644
--- a/coreutils/echo.c
+++ b/coreutils/echo.c
@@ -22,7 +22,7 @@
 //config:	bool "echo (basic SuSv3 version taking no options)"
 //config:	default y
 //config:	help
-//config:	  echo is used to print a specified string to stdout.
+//config:	echo is used to print a specified string to stdout.
 //config:
 //config:# this entry also appears in shell/Config.in, next to the echo builtin
 //config:config FEATURE_FANCY_ECHO
diff --git a/coreutils/env.c b/coreutils/env.c
index 7037a44..8def9c2 100644
--- a/coreutils/env.c
+++ b/coreutils/env.c
@@ -27,9 +27,9 @@
 //config:	bool "env (3.8 kb)"
 //config:	default y
 //config:	help
-//config:	  env is used to set an environment variable and run
-//config:	  a command; without options it displays the current
-//config:	  environment.
+//config:	env is used to set an environment variable and run
+//config:	a command; without options it displays the current
+//config:	environment.
 //config:
 //config:config FEATURE_ENV_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/expand.c b/coreutils/expand.c
index dff0ce5..64f2a53 100644
--- a/coreutils/expand.c
+++ b/coreutils/expand.c
@@ -24,7 +24,7 @@
 //config:	bool "expand (5.8 kb)"
 //config:	default y
 //config:	help
-//config:	  By default, convert all tabs to spaces.
+//config:	By default, convert all tabs to spaces.
 //config:
 //config:config FEATURE_EXPAND_LONG_OPTIONS
 //config:	bool "Enable long options"
@@ -35,7 +35,7 @@
 //config:	bool "unexpand (6 kb)"
 //config:	default y
 //config:	help
-//config:	  By default, convert only leading sequences of blanks to tabs.
+//config:	By default, convert only leading sequences of blanks to tabs.
 //config:
 //config:config FEATURE_UNEXPAND_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/expr.c b/coreutils/expr.c
index ecb7534..a2bbfdd 100644
--- a/coreutils/expr.c
+++ b/coreutils/expr.c
@@ -26,17 +26,17 @@
 //config:	bool "expr (6.1 kb)"
 //config:	default y
 //config:	help
-//config:	  expr is used to calculate numbers and print the result
-//config:	  to standard output.
+//config:	expr is used to calculate numbers and print the result
+//config:	to standard output.
 //config:
 //config:config EXPR_MATH_SUPPORT_64
 //config:	bool "Extend Posix numbers support to 64 bit"
 //config:	default y
 //config:	depends on EXPR
 //config:	help
-//config:	  Enable 64-bit math support in the expr applet. This will make
-//config:	  the applet slightly larger, but will allow computation with very
-//config:	  large numbers.
+//config:	Enable 64-bit math support in the expr applet. This will make
+//config:	the applet slightly larger, but will allow computation with very
+//config:	large numbers.
 
 //applet:IF_EXPR(APPLET(expr, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/factor.c b/coreutils/factor.c
index 4ccc3fe..467e23a 100644
--- a/coreutils/factor.c
+++ b/coreutils/factor.c
@@ -7,7 +7,7 @@
 //config:	bool "factor (2.6 kb)"
 //config:	default y
 //config:	help
-//config:	  factor factorizes integers
+//config:	factor factorizes integers
 
 //applet:IF_FACTOR(APPLET(factor, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/false.c b/coreutils/false.c
index 171ad81..e3903ef 100644
--- a/coreutils/false.c
+++ b/coreutils/false.c
@@ -10,7 +10,7 @@
 //config:	bool "false (tiny)"
 //config:	default y
 //config:	help
-//config:	  false returns an exit code of FALSE (1).
+//config:	false returns an exit code of FALSE (1).
 
 //applet:IF_FALSE(APPLET_NOFORK(false, false, BB_DIR_BIN, BB_SUID_DROP, false))
 
diff --git a/coreutils/fold.c b/coreutils/fold.c
index 35905f3..286db22 100644
--- a/coreutils/fold.c
+++ b/coreutils/fold.c
@@ -13,7 +13,7 @@
 //config:	bool "fold (4.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Wrap text to fit a specific width.
+//config:	Wrap text to fit a specific width.
 
 //applet:IF_FOLD(APPLET_NOEXEC(fold, fold, BB_DIR_USR_BIN, BB_SUID_DROP, fold))
 
diff --git a/coreutils/fsync.c b/coreutils/fsync.c
index 8524047..5e77e2c 100644
--- a/coreutils/fsync.c
+++ b/coreutils/fsync.c
@@ -10,7 +10,7 @@
 //config:	bool "fsync (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  fsync is used to flush file-related cached blocks to disk.
+//config:	fsync is used to flush file-related cached blocks to disk.
 
 //applet:IF_FSYNC(APPLET_NOFORK(fsync, fsync, BB_DIR_BIN, BB_SUID_DROP, fsync))
 
diff --git a/coreutils/head.c b/coreutils/head.c
index b4b16ab..fc3a48d 100644
--- a/coreutils/head.c
+++ b/coreutils/head.c
@@ -10,8 +10,8 @@
 //config:	bool "head (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  head is used to print the first specified number of lines
-//config:	  from files.
+//config:	head is used to print the first specified number of lines
+//config:	from files.
 //config:
 //config:config FEATURE_FANCY_HEAD
 //config:	bool "Enable -c, -q, and -v"
diff --git a/coreutils/hostid.c b/coreutils/hostid.c
index 790384c..d21e6d6 100644
--- a/coreutils/hostid.c
+++ b/coreutils/hostid.c
@@ -10,8 +10,8 @@
 //config:	bool "hostid (247 bytes)"
 //config:	default y
 //config:	help
-//config:	  hostid prints the numeric identifier (in hexadecimal) for
-//config:	  the current host.
+//config:	hostid prints the numeric identifier (in hexadecimal) for
+//config:	the current host.
 
 //applet:IF_HOSTID(APPLET_NOFORK(hostid, hostid, BB_DIR_USR_BIN, BB_SUID_DROP, hostid))
 
diff --git a/coreutils/id.c b/coreutils/id.c
index 93ca0ac..6043bca 100644
--- a/coreutils/id.c
+++ b/coreutils/id.c
@@ -16,13 +16,13 @@
 //config:	bool "id (6.7 kb)"
 //config:	default y
 //config:	help
-//config:	  id displays the current user and group ID names.
+//config:	id displays the current user and group ID names.
 //config:
 //config:config GROUPS
 //config:	bool "groups (6.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Print the group names associated with current user id.
+//config:	Print the group names associated with current user id.
 
 //applet:IF_GROUPS(APPLET_NOEXEC(groups, id, BB_DIR_USR_BIN, BB_SUID_DROP, groups))
 //applet:IF_ID(    APPLET_NOEXEC(id,     id, BB_DIR_USR_BIN, BB_SUID_DROP, id    ))
diff --git a/coreutils/install.c b/coreutils/install.c
index 4c44f0d..a1342bb 100644
--- a/coreutils/install.c
+++ b/coreutils/install.c
@@ -9,7 +9,7 @@
 //config:	bool "install (12 kb)"
 //config:	default y
 //config:	help
-//config:	  Copy files and set attributes.
+//config:	Copy files and set attributes.
 //config:
 //config:config FEATURE_INSTALL_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/link.c b/coreutils/link.c
index c6417fe..56832fd 100644
--- a/coreutils/link.c
+++ b/coreutils/link.c
@@ -9,7 +9,7 @@
 //config:	bool "link (3.1 kb)"
 //config:	default y
 //config:	help
-//config:	  link creates hard links between files.
+//config:	link creates hard links between files.
 
 //applet:IF_LINK(APPLET_NOFORK(link, link, BB_DIR_BIN, BB_SUID_DROP, link))
 
diff --git a/coreutils/ln.c b/coreutils/ln.c
index 0bd323b..fed96af 100644
--- a/coreutils/ln.c
+++ b/coreutils/ln.c
@@ -10,7 +10,7 @@
 //config:	bool "ln (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  ln is used to create hard or soft links between files.
+//config:	ln is used to create hard or soft links between files.
 
 //applet:IF_LN(APPLET_NOEXEC(ln, ln, BB_DIR_BIN, BB_SUID_DROP, ln))
 
diff --git a/coreutils/logname.c b/coreutils/logname.c
index bf37483..e614ca7 100644
--- a/coreutils/logname.c
+++ b/coreutils/logname.c
@@ -19,7 +19,7 @@
 //config:	bool "logname (894 bytes)"
 //config:	default y
 //config:	help
-//config:	  logname is used to print the current user's login name.
+//config:	logname is used to print the current user's login name.
 
 //applet:IF_LOGNAME(APPLET_NOFORK(logname, logname, BB_DIR_USR_BIN, BB_SUID_DROP, logname))
 
diff --git a/coreutils/ls.c b/coreutils/ls.c
index cf52287..0fe0345 100644
--- a/coreutils/ls.c
+++ b/coreutils/ls.c
@@ -31,7 +31,7 @@
 //config:	bool "ls (14 kb)"
 //config:	default y
 //config:	help
-//config:	  ls is used to list the contents of directories.
+//config:	ls is used to list the contents of directories.
 //config:
 //config:config FEATURE_LS_FILETYPES
 //config:	bool "Enable filetyping options (-p and -F)"
@@ -58,39 +58,39 @@
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to sort file names alphabetically.
+//config:	Allow ls to sort file names alphabetically.
 //config:
 //config:config FEATURE_LS_TIMESTAMPS
 //config:	bool "Show file timestamps"
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to display timestamps for files.
+//config:	Allow ls to display timestamps for files.
 //config:
 //config:config FEATURE_LS_USERNAME
 //config:	bool "Show username/groupnames"
 //config:	default y
 //config:	depends on LS
 //config:	help
-//config:	  Allow ls to display username/groupname for files.
+//config:	Allow ls to display username/groupname for files.
 //config:
 //config:config FEATURE_LS_COLOR
 //config:	bool "Allow use of color to identify file types"
 //config:	default y
 //config:	depends on LS && LONG_OPTS
 //config:	help
-//config:	  This enables the --color option to ls.
+//config:	This enables the --color option to ls.
 //config:
 //config:config FEATURE_LS_COLOR_IS_DEFAULT
 //config:	bool "Produce colored ls output by default"
 //config:	default y
 //config:	depends on FEATURE_LS_COLOR
 //config:	help
-//config:	  Saying yes here will turn coloring on by default,
-//config:	  even if no "--color" option is given to the ls command.
-//config:	  This is not recommended, since the colors are not
-//config:	  configurable, and the output may not be legible on
-//config:	  many output screens.
+//config:	Saying yes here will turn coloring on by default,
+//config:	even if no "--color" option is given to the ls command.
+//config:	This is not recommended, since the colors are not
+//config:	configurable, and the output may not be legible on
+//config:	many output screens.
 
 //applet:IF_LS(APPLET_NOEXEC(ls, ls, BB_DIR_BIN, BB_SUID_DROP, ls))
 
diff --git a/coreutils/md5_sha1_sum.c b/coreutils/md5_sha1_sum.c
index 6d08d2e..bcccdd6 100644
--- a/coreutils/md5_sha1_sum.c
+++ b/coreutils/md5_sha1_sum.c
@@ -9,31 +9,31 @@
 //config:	bool "md5sum (6.8 kb)"
 //config:	default y
 //config:	help
-//config:	  md5sum is used to print or check MD5 checksums.
+//config:	md5sum is used to print or check MD5 checksums.
 //config:
 //config:config SHA1SUM
 //config:	bool "sha1sum (6 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA1 message digest
+//config:	Compute and check SHA1 message digest
 //config:
 //config:config SHA256SUM
 //config:	bool "sha256sum (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA256 message digest
+//config:	Compute and check SHA256 message digest
 //config:
 //config:config SHA512SUM
 //config:	bool "sha512sum (7.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA512 message digest
+//config:	Compute and check SHA512 message digest
 //config:
 //config:config SHA3SUM
 //config:	bool "sha3sum (6.3 kb)"
 //config:	default y
 //config:	help
-//config:	  Compute and check SHA3 message digest
+//config:	Compute and check SHA3 message digest
 //config:
 //config:comment "Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum"
 //config:	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
@@ -43,9 +43,9 @@
 //config:	default y
 //config:	depends on MD5SUM || SHA1SUM || SHA256SUM || SHA512SUM || SHA3SUM
 //config:	help
-//config:	  Enabling the -c options allows files to be checked
-//config:	  against pre-calculated hash values.
-//config:	  -s and -w are useful options when verifying checksums.
+//config:	Enabling the -c options allows files to be checked
+//config:	against pre-calculated hash values.
+//config:	-s and -w are useful options when verifying checksums.
 
 //applet:IF_MD5SUM(APPLET_NOEXEC(md5sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, md5sum))
 //applet:IF_SHA1SUM(APPLET_NOEXEC(sha1sum, md5_sha1_sum, BB_DIR_USR_BIN, BB_SUID_DROP, sha1sum))
diff --git a/coreutils/mkdir.c b/coreutils/mkdir.c
index d0b74bf..2285118 100644
--- a/coreutils/mkdir.c
+++ b/coreutils/mkdir.c
@@ -17,7 +17,7 @@
 //config:	bool "mkdir (4.4 kb)"
 //config:	default y
 //config:	help
-//config:	  mkdir is used to create directories with the specified names.
+//config:	mkdir is used to create directories with the specified names.
 //config:
 //config:config FEATURE_MKDIR_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/mkfifo.c b/coreutils/mkfifo.c
index 8a2f205..0f61401 100644
--- a/coreutils/mkfifo.c
+++ b/coreutils/mkfifo.c
@@ -10,8 +10,8 @@
 //config:	bool "mkfifo (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  mkfifo is used to create FIFOs (named pipes).
-//config:	  The 'mknod' program can also create FIFOs.
+//config:	mkfifo is used to create FIFOs (named pipes).
+//config:	The 'mknod' program can also create FIFOs.
 
 //applet:IF_MKFIFO(APPLET_NOEXEC(mkfifo, mkfifo, BB_DIR_USR_BIN, BB_SUID_DROP, mkfifo))
 
diff --git a/coreutils/mknod.c b/coreutils/mknod.c
index 321415e..565b33d 100644
--- a/coreutils/mknod.c
+++ b/coreutils/mknod.c
@@ -10,8 +10,8 @@
 //config:	bool "mknod (4 kb)"
 //config:	default y
 //config:	help
-//config:	  mknod is used to create FIFOs or block/character special
-//config:	  files with the specified names.
+//config:	mknod is used to create FIFOs or block/character special
+//config:	files with the specified names.
 
 //applet:IF_MKNOD(APPLET_NOEXEC(mknod, mknod, BB_DIR_BIN, BB_SUID_DROP, mknod))
 
diff --git a/coreutils/mktemp.c b/coreutils/mktemp.c
index 3e35bef..bfef0b4 100644
--- a/coreutils/mktemp.c
+++ b/coreutils/mktemp.c
@@ -34,7 +34,7 @@
 //config:	bool "mktemp (4 kb)"
 //config:	default y
 //config:	help
-//config:	  mktemp is used to create unique temporary files
+//config:	mktemp is used to create unique temporary files
 
 //applet:IF_MKTEMP(APPLET(mktemp, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/mv.c b/coreutils/mv.c
index d620c43..147dd3b 100644
--- a/coreutils/mv.c
+++ b/coreutils/mv.c
@@ -15,7 +15,7 @@
 //config:	bool "mv (9.8 kb)"
 //config:	default y
 //config:	help
-//config:	  mv is used to move or rename files or directories.
+//config:	mv is used to move or rename files or directories.
 //config:
 //config:config FEATURE_MV_LONG_OPTIONS
 //config:	bool "Enable long options"
diff --git a/coreutils/nice.c b/coreutils/nice.c
index e30242f..0bf0552 100644
--- a/coreutils/nice.c
+++ b/coreutils/nice.c
@@ -10,7 +10,7 @@
 //config:	bool "nice (1.8 kb)"
 //config:	default y
 //config:	help
-//config:	  nice runs a program with modified scheduling priority.
+//config:	nice runs a program with modified scheduling priority.
 
 //applet:IF_NICE(APPLET(nice, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/nl.c b/coreutils/nl.c
index 9f303fe..93e78c4 100644
--- a/coreutils/nl.c
+++ b/coreutils/nl.c
@@ -8,7 +8,7 @@
 //config:	bool "nl (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  nl is used to number lines of files.
+//config:	nl is used to number lines of files.
 
 //applet:IF_NL(APPLET(nl, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/nohup.c b/coreutils/nohup.c
index 4366cdc..8e28f90 100644
--- a/coreutils/nohup.c
+++ b/coreutils/nohup.c
@@ -13,7 +13,7 @@
 //config:	bool "nohup (2 kb)"
 //config:	default y
 //config:	help
-//config:	  run a command immune to hangups, with output to a non-tty.
+//config:	run a command immune to hangups, with output to a non-tty.
 
 //applet:IF_NOHUP(APPLET(nohup, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/nproc.c b/coreutils/nproc.c
index 7144f73..68a8318 100644
--- a/coreutils/nproc.c
+++ b/coreutils/nproc.c
@@ -7,7 +7,7 @@
 //config:	bool "nproc (248 bytes)"
 //config:	default y
 //config:	help
-//config:	  Print number of CPUs
+//config:	Print number of CPUs
 
 //applet:IF_NPROC(APPLET(nproc, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/od.c b/coreutils/od.c
index edcd12a..e3a6843 100644
--- a/coreutils/od.c
+++ b/coreutils/od.c
@@ -14,7 +14,7 @@
 //config:	bool "od (11 kb)"
 //config:	default y
 //config:	help
-//config:	  od is used to dump binary files in octal and other formats.
+//config:	od is used to dump binary files in octal and other formats.
 
 //applet:IF_OD(APPLET(od, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/paste.c b/coreutils/paste.c
index e4e9c75..52f67f9 100644
--- a/coreutils/paste.c
+++ b/coreutils/paste.c
@@ -10,8 +10,8 @@
 //config:	bool "paste (4.5 kb)"
 //config:	default y
 //config:	help
-//config:	  paste is used to paste lines of different files together
-//config:	  and write the result to stdout
+//config:	paste is used to paste lines of different files together
+//config:	and write the result to stdout
 
 //applet:IF_PASTE(APPLET_NOEXEC(paste, paste, BB_DIR_USR_BIN, BB_SUID_DROP, paste))
 
diff --git a/coreutils/printenv.c b/coreutils/printenv.c
index 767a275..b0468b3 100644
--- a/coreutils/printenv.c
+++ b/coreutils/printenv.c
@@ -11,7 +11,7 @@
 //config:	bool "printenv (1 kb)"
 //config:	default y
 //config:	help
-//config:	  printenv is used to print all or part of environment.
+//config:	printenv is used to print all or part of environment.
 
 //applet:IF_PRINTENV(APPLET_NOFORK(printenv, printenv, BB_DIR_BIN, BB_SUID_DROP, printenv))
 
diff --git a/coreutils/printf.c b/coreutils/printf.c
index acaf076..d3fc72a 100644
--- a/coreutils/printf.c
+++ b/coreutils/printf.c
@@ -42,8 +42,8 @@
 //config:	bool "printf (3.3 kb)"
 //config:	default y
 //config:	help
-//config:	  printf is used to format and print specified strings.
-//config:	  It's similar to `echo' except it has more options.
+//config:	printf is used to format and print specified strings.
+//config:	It's similar to `echo' except it has more options.
 
 //applet:IF_PRINTF(APPLET_NOFORK(printf, printf, BB_DIR_USR_BIN, BB_SUID_DROP, printf))
 
diff --git a/coreutils/pwd.c b/coreutils/pwd.c
index e0a195d..345d851 100644
--- a/coreutils/pwd.c
+++ b/coreutils/pwd.c
@@ -10,7 +10,7 @@
 //config:	bool "pwd (3.4 kb)"
 //config:	default y
 //config:	help
-//config:	  pwd is used to print the current directory.
+//config:	pwd is used to print the current directory.
 
 //applet:IF_PWD(APPLET_NOFORK(pwd, pwd, BB_DIR_BIN, BB_SUID_DROP, pwd))
 
diff --git a/coreutils/readlink.c b/coreutils/readlink.c
index e593bb9..9690290 100644
--- a/coreutils/readlink.c
+++ b/coreutils/readlink.c
@@ -10,15 +10,15 @@
 //config:	bool "readlink (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  This program reads a symbolic link and returns the name
-//config:	  of the file it points to
+//config:	This program reads a symbolic link and returns the name
+//config:	of the file it points to
 //config:
 //config:config FEATURE_READLINK_FOLLOW
 //config:	bool "Enable canonicalization by following all symlinks (-f)"
 //config:	default y
 //config:	depends on READLINK
 //config:	help
-//config:	  Enable the readlink option (-f).
+//config:	Enable the readlink option (-f).
 
 //applet:IF_READLINK(APPLET(readlink, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/realpath.c b/coreutils/realpath.c
index a2661c4..6a61c3d 100644
--- a/coreutils/realpath.c
+++ b/coreutils/realpath.c
@@ -10,8 +10,8 @@
 //config:	bool "realpath (1.1 kb)"
 //config:	default y
 //config:	help
-//config:	  Return the canonicalized absolute pathname.
-//config:	  This isn't provided by GNU shellutils, but where else does it belong.
+//config:	Return the canonicalized absolute pathname.
+//config:	This isn't provided by GNU shellutils, but where else does it belong.
 
 //applet:IF_REALPATH(APPLET(realpath, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/rm.c b/coreutils/rm.c
index 70530a4..f91c945 100644
--- a/coreutils/rm.c
+++ b/coreutils/rm.c
@@ -14,7 +14,7 @@
 //config:	bool "rm (4.9 kb)"
 //config:	default y
 //config:	help
-//config:	  rm is used to remove files or directories.
+//config:	rm is used to remove files or directories.
 
 //applet:IF_RM(APPLET_NOFORK(rm, rm, BB_DIR_BIN, BB_SUID_DROP, rm))
 
diff --git a/coreutils/rmdir.c b/coreutils/rmdir.c
index 2486ea6..c04ce78 100644
--- a/coreutils/rmdir.c
+++ b/coreutils/rmdir.c
@@ -10,15 +10,15 @@
 //config:	bool "rmdir (3.4 kb)"
 //config:	default y
 //config:	help
-//config:	  rmdir is used to remove empty directories.
+//config:	rmdir is used to remove empty directories.
 //config:
 //config:config FEATURE_RMDIR_LONG_OPTIONS
 //config:	bool "Enable long options"
 //config:	default y
 //config:	depends on RMDIR && LONG_OPTS
 //config:	help
-//config:	  Support long options for the rmdir applet, including
-//config:	  --ignore-fail-on-non-empty for compatibility with GNU rmdir.
+//config:	Support long options for the rmdir applet, including
+//config:	--ignore-fail-on-non-empty for compatibility with GNU rmdir.
 
 //applet:IF_RMDIR(APPLET_NOFORK(rmdir, rmdir, BB_DIR_BIN, BB_SUID_DROP, rmdir))
 
diff --git a/coreutils/seq.c b/coreutils/seq.c
index c66bed9..f36dbb4 100644
--- a/coreutils/seq.c
+++ b/coreutils/seq.c
@@ -10,7 +10,7 @@
 //config:	bool "seq (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  print a sequence of numbers
+//config:	print a sequence of numbers
 
 //applet:IF_SEQ(APPLET_NOFORK(seq, seq, BB_DIR_USR_BIN, BB_SUID_DROP, seq))
 
diff --git a/coreutils/shred.c b/coreutils/shred.c
index 93319e2..3ceb58d 100644
--- a/coreutils/shred.c
+++ b/coreutils/shred.c
@@ -8,7 +8,7 @@
 //config:	bool "shred (5 kb)"
 //config:	default y
 //config:	help
-//config:	  Overwrite a file to hide its contents, and optionally delete it
+//config:	Overwrite a file to hide its contents, and optionally delete it
 
 //applet:IF_SHRED(APPLET(shred, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/shuf.c b/coreutils/shuf.c
index b1a9d12..4030415 100644
--- a/coreutils/shuf.c
+++ b/coreutils/shuf.c
@@ -11,7 +11,7 @@
 //config:	bool "shuf (5.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Generate random permutations
+//config:	Generate random permutations
 
 //kbuild:lib-$(CONFIG_SHUF) += shuf.o
 //applet:IF_SHUF(APPLET_NOEXEC(shuf, shuf, BB_DIR_USR_BIN, BB_SUID_DROP, shuf))
diff --git a/coreutils/sleep.c b/coreutils/sleep.c
index 6b3aa1f..9b9581c 100644
--- a/coreutils/sleep.c
+++ b/coreutils/sleep.c
@@ -16,29 +16,29 @@
 //config:	bool "sleep (1.7 kb)"
 //config:	default y
 //config:	help
-//config:	  sleep is used to pause for a specified number of seconds.
-//config:	  It comes in 3 versions:
-//config:	  - small: takes one integer parameter
-//config:	  - fancy: takes multiple integer arguments with suffixes:
-//config:	    sleep 1d 2h 3m 15s
-//config:	  - fancy with fractional numbers:
-//config:	    sleep 2.3s 4.5h sleeps for 16202.3 seconds
-//config:	  Last one is "the most compatible" with coreutils sleep,
-//config:	  but it adds around 1k of code.
+//config:	sleep is used to pause for a specified number of seconds.
+//config:	It comes in 3 versions:
+//config:	- small: takes one integer parameter
+//config:	- fancy: takes multiple integer arguments with suffixes:
+//config:		sleep 1d 2h 3m 15s
+//config:	- fancy with fractional numbers:
+//config:		sleep 2.3s 4.5h sleeps for 16202.3 seconds
+//config:	Last one is "the most compatible" with coreutils sleep,
+//config:	but it adds around 1k of code.
 //config:
 //config:config FEATURE_FANCY_SLEEP
 //config:	bool "Enable multiple arguments and s/m/h/d suffixes"
 //config:	default y
 //config:	depends on SLEEP
 //config:	help
-//config:	  Allow sleep to pause for specified minutes, hours, and days.
+//config:	Allow sleep to pause for specified minutes, hours, and days.
 //config:
 //config:config FEATURE_FLOAT_SLEEP
 //config:	bool "Enable fractional arguments"
 //config:	default y
 //config:	depends on FEATURE_FANCY_SLEEP
 //config:	help
-//config:	  Allow for fractional numeric parameters.
+//config:	Allow for fractional numeric parameters.
 
 /* Do not make this applet NOFORK. It breaks ^C-ing of pauses in shells */
 //applet:IF_SLEEP(APPLET(sleep, BB_DIR_BIN, BB_SUID_DROP))
diff --git a/coreutils/sort.c b/coreutils/sort.c
index a880381..9860dca 100644
--- a/coreutils/sort.c
+++ b/coreutils/sort.c
@@ -15,19 +15,19 @@
 //config:	bool "sort (7.4 kb)"
 //config:	default y
 //config:	help
-//config:	  sort is used to sort lines of text in specified files.
+//config:	sort is used to sort lines of text in specified files.
 //config:
 //config:config FEATURE_SORT_BIG
 //config:	bool "Full SuSv3 compliant sort (support -ktcsbdfiozgM)"
 //config:	default y
 //config:	depends on SORT
 //config:	help
-//config:	  Without this, sort only supports -r, -u, and an integer version
-//config:	  of -n. Selecting this adds sort keys, floating point support, and
-//config:	  more. This adds a little over 3k to a nonstatic build on x86.
+//config:	Without this, sort only supports -r, -u, and an integer version
+//config:	of -n. Selecting this adds sort keys, floating point support, and
+//config:	more. This adds a little over 3k to a nonstatic build on x86.
 //config:
-//config:	  The SuSv3 sort standard is available at:
-//config:	  http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
+//config:	The SuSv3 sort standard is available at:
+//config:	http://www.opengroup.org/onlinepubs/007904975/utilities/sort.html
 
 //applet:IF_SORT(APPLET_NOEXEC(sort, sort, BB_DIR_USR_BIN, BB_SUID_DROP, sort))
 
diff --git a/coreutils/split.c b/coreutils/split.c
index dc6f621..d0c6357 100644
--- a/coreutils/split.c
+++ b/coreutils/split.c
@@ -9,16 +9,16 @@
 //config:	bool "split (5.4 kb)"
 //config:	default y
 //config:	help
-//config:	  Split a file into pieces.
+//config:	Split a file into pieces.
 //config:
 //config:config FEATURE_SPLIT_FANCY
 //config:	bool "Fancy extensions"
 //config:	default y
 //config:	depends on SPLIT
 //config:	help
-//config:	  Add support for features not required by SUSv3.
-//config:	  Supports additional suffixes 'b' for 512 bytes,
-//config:	  'g' for 1GiB for the -b option.
+//config:	Add support for features not required by SUSv3.
+//config:	Supports additional suffixes 'b' for 512 bytes,
+//config:	'g' for 1GiB for the -b option.
 
 //applet:IF_SPLIT(APPLET(split, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/stat.c b/coreutils/stat.c
index e2f9a22..3b85808 100644
--- a/coreutils/stat.c
+++ b/coreutils/stat.c
@@ -16,16 +16,16 @@
 //config:	bool "stat (10 kb)"
 //config:	default y
 //config:	help
-//config:	  display file or filesystem status.
+//config:	display file or filesystem status.
 //config:
 //config:config FEATURE_STAT_FORMAT
 //config:	bool "Enable custom formats (-c)"
 //config:	default y
 //config:	depends on STAT
 //config:	help
-//config:	  Without this, stat will not support the '-c format' option where
-//config:	  users can pass a custom format string for output. This adds about
-//config:	  7k to a nonstatic build on amd64.
+//config:	Without this, stat will not support the '-c format' option where
+//config:	users can pass a custom format string for output. This adds about
+//config:	7k to a nonstatic build on amd64.
 //config:
 //config:config FEATURE_STAT_FILESYSTEM
 //config:	bool "Enable display of filesystem status (-f)"
@@ -33,8 +33,8 @@
 //config:	depends on STAT
 //config:	select PLATFORM_LINUX # statfs()
 //config:	help
-//config:	  Without this, stat will not support the '-f' option to display
-//config:	  information about filesystem status.
+//config:	Without this, stat will not support the '-f' option to display
+//config:	information about filesystem status.
 
 //applet:IF_STAT(APPLET(stat, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/stty.c b/coreutils/stty.c
index 3a4b32c..f987fbb 100644
--- a/coreutils/stty.c
+++ b/coreutils/stty.c
@@ -23,7 +23,7 @@
 //config:	bool "stty (8.6 kb)"
 //config:	default y
 //config:	help
-//config:	  stty is used to change and print terminal line settings.
+//config:	stty is used to change and print terminal line settings.
 
 //applet:IF_STTY(APPLET(stty, BB_DIR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/sum.c b/coreutils/sum.c
index ef2f94e..487e93f 100644
--- a/coreutils/sum.c
+++ b/coreutils/sum.c
@@ -16,7 +16,7 @@
 //config:	bool "sum (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  checksum and count the blocks in a file
+//config:	checksum and count the blocks in a file
 
 //applet:IF_SUM(APPLET(sum, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/sync.c b/coreutils/sync.c
index 5557103..6644528 100644
--- a/coreutils/sync.c
+++ b/coreutils/sync.c
@@ -11,14 +11,14 @@
 //config:	bool "sync (769 bytes)"
 //config:	default y
 //config:	help
-//config:	  sync is used to flush filesystem buffers.
+//config:	sync is used to flush filesystem buffers.
 //config:config FEATURE_SYNC_FANCY
 //config:	bool "Enable -d and -f flags (requires syncfs(2) in libc)"
 //config:	default y
 //config:	depends on SYNC
 //config:	help
-//config:	  sync -d FILE... executes fdatasync() on each FILE.
-//config:	  sync -f FILE... executes syncfs() on each FILE.
+//config:	sync -d FILE... executes fdatasync() on each FILE.
+//config:	sync -f FILE... executes syncfs() on each FILE.
 
 //applet:IF_SYNC(APPLET_NOFORK(sync, sync, BB_DIR_BIN, BB_SUID_DROP, sync))
 
diff --git a/coreutils/tac.c b/coreutils/tac.c
index 1f5b34a..6d3ea9c 100644
--- a/coreutils/tac.c
+++ b/coreutils/tac.c
@@ -16,7 +16,7 @@
 //config:	bool "tac (4.1 kb)"
 //config:	default y
 //config:	help
-//config:	  tac is used to concatenate and print files in reverse.
+//config:	tac is used to concatenate and print files in reverse.
 
 //applet:IF_TAC(APPLET_NOEXEC(tac, tac, BB_DIR_USR_BIN, BB_SUID_DROP, tac))
 
diff --git a/coreutils/tail.c b/coreutils/tail.c
index a834e24..fd310f4 100644
--- a/coreutils/tail.c
+++ b/coreutils/tail.c
@@ -22,20 +22,20 @@
 //config:	bool "tail (7.1 kb)"
 //config:	default y
 //config:	help
-//config:	  tail is used to print the last specified number of lines
-//config:	  from files.
+//config:	tail is used to print the last specified number of lines
+//config:	from files.
 //config:
 //config:config FEATURE_FANCY_TAIL
 //config:	bool "Enable -q, -s, -v, and -F options"
 //config:	default y
 //config:	depends on TAIL
 //config:	help
-//config:	  These options are provided by GNU tail, but
-//config:	  are not specific in the SUSv3 standard:
-//config:	    -q      Never output headers giving file names
-//config:	    -s SEC  Wait SEC seconds between reads with -f
-//config:	    -v      Always output headers giving file names
-//config:	    -F      Same as -f, but keep retrying
+//config:	These options are provided by GNU tail, but
+//config:	are not specified in the SUSv3 standard:
+//config:		-q      Never output headers giving file names
+//config:		-s SEC  Wait SEC seconds between reads with -f
+//config:		-v      Always output headers giving file names
+//config:		-F      Same as -f, but keep retrying
 
 //applet:IF_TAIL(APPLET(tail, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/tee.c b/coreutils/tee.c
index f7676ce..f0ec791 100644
--- a/coreutils/tee.c
+++ b/coreutils/tee.c
@@ -10,15 +10,15 @@
 //config:	bool "tee (4.3 kb)"
 //config:	default y
 //config:	help
-//config:	  tee is used to read from standard input and write
-//config:	  to standard output and files.
+//config:	tee is used to read from standard input and write
+//config:	to standard output and files.
 //config:
 //config:config FEATURE_TEE_USE_BLOCK_IO
 //config:	bool "Enable block I/O (larger/faster) instead of byte I/O"
 //config:	default y
 //config:	depends on TEE
 //config:	help
-//config:	  Enable this option for a faster tee, at expense of size.
+//config:	Enable this option for a faster tee, at expense of size.
 
 //applet:IF_TEE(APPLET(tee, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/test.c b/coreutils/test.c
index 5cca5d1..d8ac42e 100644
--- a/coreutils/test.c
+++ b/coreutils/test.c
@@ -23,28 +23,28 @@
 //config:	bool "test (3.6 kb)"
 //config:	default y
 //config:	help
-//config:	  test is used to check file types and compare values,
-//config:	  returning an appropriate exit code. The bash shell
-//config:	  has test built in, ash can build it in optionally.
+//config:	test is used to check file types and compare values,
+//config:	returning an appropriate exit code. The bash shell
+//config:	has test built in, ash can build it in optionally.
 //config:
 //config:config TEST1
 //config:	bool "test as ["
 //config:	default y
 //config:	help
-//config:	  Provide test command in the "[ EXPR ]" form
+//config:	Provide test command in the "[ EXPR ]" form
 //config:
 //config:config TEST2
 //config:	bool "test as [["
 //config:	default y
 //config:	help
-//config:	  Provide test command in the "[[ EXPR ]]" form
+//config:	Provide test command in the "[[ EXPR ]]" form
 //config:
 //config:config FEATURE_TEST_64
 //config:	bool "Extend test to 64 bit"
 //config:	default y
 //config:	depends on TEST || TEST1 || TEST2 || ASH_TEST || HUSH_TEST
 //config:	help
-//config:	  Enable 64-bit support in test.
+//config:	Enable 64-bit support in test.
 
 //applet:IF_TEST(APPLET_NOFORK(test, test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
 //applet:IF_TEST1(APPLET_NOFORK([,   test, BB_DIR_USR_BIN, BB_SUID_DROP, test))
diff --git a/coreutils/timeout.c b/coreutils/timeout.c
index 5981c7b..4a6117f 100644
--- a/coreutils/timeout.c
+++ b/coreutils/timeout.c
@@ -31,8 +31,8 @@
 //config:	bool "timeout (5.5 kb)"
 //config:	default y
 //config:	help
-//config:	  Runs a program and watches it. If it does not terminate in
-//config:	  specified number of seconds, it is sent a signal.
+//config:	Runs a program and watches it. If it does not terminate in
+//config:	specified number of seconds, it is sent a signal.
 
 //applet:IF_TIMEOUT(APPLET(timeout, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/touch.c b/coreutils/touch.c
index 7b7b9f8..11b40d4 100644
--- a/coreutils/touch.c
+++ b/coreutils/touch.c
@@ -16,23 +16,23 @@
 //config:	bool "touch (5.8 kb)"
 //config:	default y
 //config:	help
-//config:	  touch is used to create or change the access and/or
-//config:	  modification timestamp of specified files.
+//config:	touch is used to create or change the access and/or
+//config:	modification timestamp of specified files.
 //config:
 //config:config FEATURE_TOUCH_NODEREF
 //config:	bool "Add support for -h"
 //config:	default y
 //config:	depends on TOUCH
 //config:	help
-//config:	  Enable touch to have the -h option.
-//config:	  This requires libc support for lutimes() function.
+//config:	Enable touch to have the -h option.
+//config:	This requires libc support for lutimes() function.
 //config:
 //config:config FEATURE_TOUCH_SUSV3
 //config:	bool "Add support for SUSV3 features (-d -t -r)"
 //config:	default y
 //config:	depends on TOUCH
 //config:	help
-//config:	  Enable touch to use a reference file or a given date/time argument.
+//config:	Enable touch to use a reference file or a given date/time argument.
 
 //applet:IF_TOUCH(APPLET_NOFORK(touch, touch, BB_DIR_BIN, BB_SUID_DROP, touch))
 
diff --git a/coreutils/tr.c b/coreutils/tr.c
index 4281a2c..64e4efc 100644
--- a/coreutils/tr.c
+++ b/coreutils/tr.c
@@ -22,27 +22,27 @@
 //config:	bool "tr (5.5 kb)"
 //config:	default y
 //config:	help
-//config:	  tr is used to squeeze, and/or delete characters from standard
-//config:	  input, writing to standard output.
+//config:	tr is used to squeeze, and/or delete characters from standard
+//config:	input, writing to standard output.
 //config:
 //config:config FEATURE_TR_CLASSES
 //config:	bool "Enable character classes (such as [:upper:])"
 //config:	default y
 //config:	depends on TR
 //config:	help
-//config:	  Enable character classes, enabling commands such as:
-//config:	  tr [:upper:] [:lower:] to convert input into lowercase.
+//config:	Enable character classes, enabling commands such as:
+//config:	tr [:upper:] [:lower:] to convert input into lowercase.
 //config:
 //config:config FEATURE_TR_EQUIV
 //config:	bool "Enable equivalence classes"
 //config:	default y
 //config:	depends on TR
 //config:	help
-//config:	  Enable equivalence classes, which essentially add the enclosed
-//config:	  character to the current set. For instance, tr [=a=] xyz would
-//config:	  replace all instances of 'a' with 'xyz'. This option is mainly
-//config:	  useful for cases when no other way of expressing a character
-//config:	  is possible.
+//config:	Enable equivalence classes, which essentially add the enclosed
+//config:	character to the current set. For instance, tr [=a=] xyz would
+//config:	replace all instances of 'a' with 'xyz'. This option is mainly
+//config:	useful for cases when no other way of expressing a character
+//config:	is possible.
 
 //applet:IF_TR(APPLET(tr, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/true.c b/coreutils/true.c
index 29386b0..400388c 100644
--- a/coreutils/true.c
+++ b/coreutils/true.c
@@ -10,7 +10,7 @@
 //config:	bool "true (tiny)"
 //config:	default y
 //config:	help
-//config:	  true returns an exit code of TRUE (0).
+//config:	true returns an exit code of TRUE (0).
 
 //applet:IF_TRUE(APPLET_NOFORK(true, true, BB_DIR_BIN, BB_SUID_DROP, true))
 
diff --git a/coreutils/truncate.c b/coreutils/truncate.c
index eefe2b4..f67abaf 100644
--- a/coreutils/truncate.c
+++ b/coreutils/truncate.c
@@ -9,8 +9,8 @@
 //config:	bool "truncate (4.7 kb)"
 //config:	default y
 //config:	help
-//config:	  truncate truncates files to a given size. If a file does
-//config:	  not exist, it is created unless told otherwise.
+//config:	truncate truncates files to a given size. If a file does
+//config:	not exist, it is created unless told otherwise.
 
 //applet:IF_TRUNCATE(APPLET_NOFORK(truncate, truncate, BB_DIR_USR_BIN, BB_SUID_DROP, truncate))
 
diff --git a/coreutils/tty.c b/coreutils/tty.c
index 9a5f1ef..331941a 100644
--- a/coreutils/tty.c
+++ b/coreutils/tty.c
@@ -10,8 +10,8 @@
 //config:	bool "tty (3.3 kb)"
 //config:	default y
 //config:	help
-//config:	  tty is used to print the name of the current terminal to
-//config:	  standard output.
+//config:	tty is used to print the name of the current terminal to
+//config:	standard output.
 
 //applet:IF_TTY(APPLET(tty, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/uname.c b/coreutils/uname.c
index 8a33cf3..aad58ca 100644
--- a/coreutils/uname.c
+++ b/coreutils/uname.c
@@ -46,22 +46,22 @@
 //config:	bool "uname (3.7 kb)"
 //config:	default y
 //config:	help
-//config:	  uname is used to print system information.
+//config:	uname is used to print system information.
 //config:
 //config:config UNAME_OSNAME
 //config:	string "Operating system name"
 //config:	default "GNU/Linux"
 //config:	depends on UNAME
 //config:	help
-//config:	  Sets the operating system name reported by uname -o.  The
-//config:	  default is "GNU/Linux".
+//config:	Sets the operating system name reported by uname -o.  The
+//config:	default is "GNU/Linux".
 //config:
 //can't use "ARCH" for this applet, all hell breaks loose in build system :)
 //config:config BB_ARCH
 //config:	bool "arch (1.6 kb)"
 //config:	default y
 //config:	help
-//config:	  Same as uname -m.
+//config:	Same as uname -m.
 
 //applet:IF_UNAME(APPLET(uname, BB_DIR_BIN, BB_SUID_DROP))
 //                  APPLET_ODDNAME:name  main   location    suid_type     help
diff --git a/coreutils/uniq.c b/coreutils/uniq.c
index 3f9c56e..f71557b 100644
--- a/coreutils/uniq.c
+++ b/coreutils/uniq.c
@@ -10,7 +10,7 @@
 //config:	bool "uniq (4.8 kb)"
 //config:	default y
 //config:	help
-//config:	  uniq is used to remove duplicate lines from a sorted file.
+//config:	uniq is used to remove duplicate lines from a sorted file.
 
 //applet:IF_UNIQ(APPLET(uniq, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/unlink.c b/coreutils/unlink.c
index fcc86da..3322d5b 100644
--- a/coreutils/unlink.c
+++ b/coreutils/unlink.c
@@ -9,7 +9,7 @@
 //config:	bool "unlink (3.5 kb)"
 //config:	default y
 //config:	help
-//config:	  unlink deletes a file by calling unlink()
+//config:	unlink deletes a file by calling unlink()
 
 //applet:IF_UNLINK(APPLET(unlink, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/usleep.c b/coreutils/usleep.c
index 1675b2f..7c25aad 100644
--- a/coreutils/usleep.c
+++ b/coreutils/usleep.c
@@ -10,7 +10,7 @@
 //config:	bool "usleep (1.1 kb)"
 //config:	default y
 //config:	help
-//config:	  usleep is used to pause for a specified number of microseconds.
+//config:	usleep is used to pause for a specified number of microseconds.
 
 //applet:IF_USLEEP(APPLET_NOFORK(usleep, usleep, BB_DIR_BIN, BB_SUID_DROP, usleep))
 
diff --git a/coreutils/uudecode.c b/coreutils/uudecode.c
index 418d023..4e72e86 100644
--- a/coreutils/uudecode.c
+++ b/coreutils/uudecode.c
@@ -14,7 +14,7 @@
 //config:	bool "uudecode (5.9 kb)"
 //config:	default y
 //config:	help
-//config:	  uudecode is used to decode a uuencoded file.
+//config:	uudecode is used to decode a uuencoded file.
 
 //applet:IF_UUDECODE(APPLET(uudecode, BB_DIR_USR_BIN, BB_SUID_DROP))
 
@@ -179,7 +179,7 @@ int uudecode_main(int argc UNUSED_PARAM, char **argv)
 //config:	bool "base64 (5 kb)"
 //config:	default y
 //config:	help
-//config:	  Base64 encode and decode
+//config:	Base64 encode and decode
 
 //usage:#define base64_trivial_usage
 //usage:	"[-d] [FILE]"
diff --git a/coreutils/uuencode.c b/coreutils/uuencode.c
index cd167ae..7164f83 100644
--- a/coreutils/uuencode.c
+++ b/coreutils/uuencode.c
@@ -11,7 +11,7 @@
 //config:	bool "uuencode (4.6 kb)"
 //config:	default y
 //config:	help
-//config:	  uuencode is used to uuencode a file.
+//config:	uuencode is used to uuencode a file.
 
 //applet:IF_UUENCODE(APPLET(uuencode, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/wc.c b/coreutils/wc.c
index 716119d..c74b7a6 100644
--- a/coreutils/wc.c
+++ b/coreutils/wc.c
@@ -36,15 +36,15 @@
 //config:	bool "wc (4.4 kb)"
 //config:	default y
 //config:	help
-//config:	  wc is used to print the number of bytes, words, and lines,
-//config:	  in specified files.
+//config:	wc is used to print the number of bytes, words, and lines,
+//config:	in specified files.
 //config:
 //config:config FEATURE_WC_LARGE
 //config:	bool "Support very large counts"
 //config:	default y
 //config:	depends on WC
 //config:	help
-//config:	  Use "unsigned long long" for counter variables.
+//config:	Use "unsigned long long" for counter variables.
 
 //applet:IF_WC(APPLET(wc, BB_DIR_USR_BIN, BB_SUID_DROP))
 
diff --git a/coreutils/who.c b/coreutils/who.c
index 7316790..91f9913 100644
--- a/coreutils/who.c
+++ b/coreutils/who.c
@@ -17,26 +17,26 @@
  *----------------------------------------------------------------------
  */
 //config:config WHO
-//config:      bool "who (3.7 kb)"
-//config:      default y
-//config:      depends on FEATURE_UTMP
-//config:      help
-//config:        who is used to show who is logged on.
+//config:	bool "who (3.7 kb)"
+//config:	default y
+//config:	depends on FEATURE_UTMP
+//config:	help
+//config:	Print users currently logged on.
 //config:
 // procps-ng has this variation of "who":
 //config:config W
-//config:      bool "w (3.7 kb)"
-//config:      default y
-//config:      depends on FEATURE_UTMP
-//config:      help
-//config:        w is used to show who is logged on.
+//config:	bool "w (3.7 kb)"
+//config:	default y
+//config:	depends on FEATURE_UTMP
+//config:	help
+//config:	Print users currently logged on.
 //config:
 //config:config USERS
-//config:      bool "users (3.2 kb)"
-//config:      default y
-//config:      depends on FEATURE_UTMP
-//config:      help
-//config:        Print users currently logged on.
+//config:	bool "users (3.2 kb)"
+//config:	default y
+//config:	depends on FEATURE_UTMP
+//config:	help
+//config:	Print users currently logged on.
 
 //                APPLET_ODDNAME:name   main location        suid_type     help
 //applet:IF_USERS(APPLET_ODDNAME(users, who, BB_DIR_USR_BIN, BB_SUID_DROP, users))
diff --git a/coreutils/whoami.c b/coreutils/whoami.c
index 02a5108..9dab158 100644
--- a/coreutils/whoami.c
+++ b/coreutils/whoami.c
@@ -10,8 +10,8 @@
 //config:	bool "whoami (2.9 kb)"
 //config:	default y
 //config:	help
-//config:	  whoami is used to print the username of the current
-//config:	  user id (same as id -un).
+//config:	whoami is used to print the username of the current
+//config:	user id (same as id -un).
 
 //applet:IF_WHOAMI(APPLET_NOFORK(whoami, whoami, BB_DIR_USR_BIN, BB_SUID_DROP, whoami))
 
diff --git a/coreutils/yes.c b/coreutils/yes.c
index e8edc0c..493b7b1 100644
--- a/coreutils/yes.c
+++ b/coreutils/yes.c
@@ -14,8 +14,8 @@
 //config:	bool "yes (956 bytes)"
 //config:	default y
 //config:	help
-//config:	  yes is used to repeatedly output a specific string, or
-//config:	  the default string `y'.
+//config:	yes is used to repeatedly output a specific string, or
+//config:	the default string `y'.
 
 //applet:IF_YES(APPLET_NOFORK(yes, yes, BB_DIR_USR_BIN, BB_SUID_DROP, yes))