General cleanup of comments, defines, includes, and global variables, removed those that arent needed, grouped those remaining at the top.

Re-ordered functions to the order they are called.
Removed static crc table, it now generates the table once for itself.
Results in source reduced by 40%, so it should be a lot easier to work on in the future, binary size only reduced by under 2KB though.

1 files changed, 632 insertions, 1451 deletions

diff --git a/archival/gunzip.c b/archival/gunzip.c
index ee86930..7a360a6 100644
--- a/archival/gunzip.c
+++ b/archival/gunzip.c
@@ -2,7 +2,7 @@
 /*
  * Gzip implementation for busybox
  *
- * Based on GNU gzip Copyright (C) 1992-1993 Jean-loup Gailly.
+ * Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly.
  *
  * Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de>
  * based on gzip sources
@@ -25,24 +25,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
- */
-
-#include "busybox.h"
-#include <getopt.h>
-
-/* These defines are very important for BusyBox.  Without these,
- * huge chunks of ram are pre-allocated making the BusyBox bss 
- * size Freaking Huge(tm), which is a bad thing.*/
-#define SMALL_MEM
-#define DYN_ALLOC
-
-#define BB_DECLARE_EXTERN
-#define bb_need_memory_exhausted
-#define bb_need_name_too_long
-#include "messages.c"
-
-
-/* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
+ *
+ * gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
  * Copyright (C) 1992-1993 Jean-loup Gailly
  * The unzip code was written and put in the public domain by Mark Adler.
  * Portions of the lzw code are derived from the public domain 'compress'
@@ -73,246 +57,59 @@ static char *license_msg[] = {
 };
 #endif
 
-/* Compress files with zip algorithm and 'compress' interface.
- * See usage() and help() functions below for all options.
- * Outputs:
- *        file.gz:   compressed file with same mode, owner, and utimes
- *     or stdout with -c option or if stdin used as input.
- * If the output file name had to be truncated, the original name is kept
- * in the compressed file.
- * On MSDOS, file.tmp -> file.tmz. On VMS, file.tmp -> file.tmp-gz.
- *
- * Using gz on MSDOS would create too many file name conflicts. For
- * example, foo.txt -> foo.tgz (.tgz must be reserved as shorthand for
- * tar.gz). Similarly, foo.dir and foo.doc would both be mapped to foo.dgz.
- * I also considered 12345678.txt -> 12345txt.gz but this truncates the name
- * too heavily. There is no ideal solution given the MSDOS 8+3 limitation. 
- *
- * For the meaning of all compilation flags, see comments in Makefile.in.
- */
-
+#include "busybox.h"
+#include <getopt.h>
 #include <ctype.h>
 #include <sys/types.h>
 #include <signal.h>
 #include <errno.h>
-
-/* #include "tailor.h" */
-
-/* tailor.h -- target dependent definitions
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
-
-/* The target dependent definitions should be defined here only.
- * The target dependent functions should be defined in tailor.c.
- */
-
-#define RECORD_IO 0
-
-#define get_char() get_byte()
-#define put_char(c) put_byte(c)
-
-
-/* I don't like nested includes, but the string and io functions are used
- * too often
- */
 #include <stdio.h>
-#if !defined(NO_STRING_H) || defined(STDC_HEADERS)
-#  include <string.h>
-#  if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
-#    include <memory.h>
-#  endif
-#  define memzero(s, n)     memset ((void *)(s), 0, (n))
-#else
-#  include <strings.h>
-#  define strchr            index
-#  define strrchr           rindex
-#  define memcpy(d, s, n)   bcopy((s), (d), (n))
-#  define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
-#  define memzero(s, n)     bzero((s), (n))
-#endif
-
-#ifndef RETSIGTYPE
-#  define RETSIGTYPE void
-#endif
-
-#define local static
+#include <string.h>
+#include <memory.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <time.h>
+#include <dirent.h>
+#define BB_DECLARE_EXTERN
+#define bb_need_memory_exhausted
+#define bb_need_name_too_long
+#include "messages.c"
 
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
+#define RECORD_IO 0
 
 /* Return codes from gzip */
 #define OK      0
 #define ERROR   1
 #define WARNING 2
 
-/* Compression methods (see algorithm.doc) */
-#define DEFLATED    8
-
-extern int method;				/* compression method */
-
-/* To save memory for 16 bit systems, some arrays are overlaid between
- * the various modules:
- * deflate:  prev+head   window      d_buf  l_buf  outbuf
- * unlzw:    tab_prefix  tab_suffix  stack  inbuf  outbuf
- * inflate:              window             inbuf
- * unpack:               window             inbuf  prefix_len
- * unlzh:    left+right  window      c_table inbuf c_len
- * For compression, input is done in window[]. For decompression, output
- * is done in window except for unlzw.
- */
-
-#ifndef	INBUFSIZ
-#  ifdef SMALL_MEM
-#    define INBUFSIZ  0x2000	/* input buffer size */
-#  else
-#    define INBUFSIZ  0x8000	/* input buffer size */
-#  endif
-#endif
-#define INBUF_EXTRA  64			/* required by unlzw() */
-
-#ifndef	OUTBUFSIZ
-#  ifdef SMALL_MEM
-#    define OUTBUFSIZ   8192	/* output buffer size */
-#  else
-#    define OUTBUFSIZ  16384	/* output buffer size */
-#  endif
-#endif
-#define OUTBUF_EXTRA 2048		/* required by unlzw() */
-
-#define SMALL_MEM
-
-#ifndef DIST_BUFSIZE
-#  ifdef SMALL_MEM
-#    define DIST_BUFSIZE 0x2000	/* buffer for distances, see trees.c */
-#  else
-#    define DIST_BUFSIZE 0x8000	/* buffer for distances, see trees.c */
-#  endif
-#endif
-
-/*#define DYN_ALLOC*/
-
-#ifdef DYN_ALLOC
-#  define EXTERN(type, array)  extern type * array
-#  define DECLARE(type, array, size)  type * array
-#  define ALLOC(type, array, size) { \
-      array = (type*)calloc((size_t)(((size)+1L)/2), 2*sizeof(type)); \
-      if (array == NULL) errorMsg(memory_exhausted); \
-   }
-#  define FREE(array) {if (array != NULL) free(array), array=NULL;}
-#else
-#  define EXTERN(type, array)  extern type array[]
-#  define DECLARE(type, array, size)  type array[size]
-#  define ALLOC(type, array, size)
-#  define FREE(array)
-#endif
-
-EXTERN(uch, inbuf);				/* input buffer */
-EXTERN(uch, outbuf);			/* output buffer */
-EXTERN(ush, d_buf);				/* buffer for distances, see trees.c */
-EXTERN(uch, window);			/* Sliding window and suffix table (unlzw) */
-#define tab_suffix window
-#ifndef MAXSEG_64K
-#  define tab_prefix prev		/* hash link (see deflate.c) */
-#  define head (prev+WSIZE)		/* hash head (see deflate.c) */
-EXTERN(ush, tab_prefix);		/* prefix code (see unlzw.c) */
-#else
-#  define tab_prefix0 prev
-#  define head tab_prefix1
-EXTERN(ush, tab_prefix0);		/* prefix for even codes */
-EXTERN(ush, tab_prefix1);		/* prefix for odd  codes */
-#endif
-
-extern unsigned insize;			/* valid bytes in inbuf */
-extern unsigned inptr;			/* index of next byte to be processed in inbuf */
-extern unsigned outcnt;			/* bytes in output buffer */
-
-extern long bytes_in;			/* number of input bytes */
-extern long bytes_out;			/* number of output bytes */
-extern long header_bytes;		/* number of bytes in gzip header */
+#define DEFLATED     8
+#define INBUFSIZ     0x2000	/* input buffer size */
+#define INBUF_EXTRA  64		/* required by unlzw() */
+#define OUTBUFSIZ    8192	/* output buffer size */
+#define OUTBUF_EXTRA 2048	/* required by unlzw() */
+#define DIST_BUFSIZE 0x2000	/* buffer for distances, see trees.c */
 
-extern long ifile_size;			/* input file size, -1 for devices (debug only) */
-
-typedef int file_t;				/* Do not use stdio */
-
-#define NO_FILE  (-1)			/* in memory compression */
-
-
-#define	GZIP_MAGIC     "\037\213"	/* Magic header for gzip files, 1F 8B */
+#define	GZIP_MAGIC  "\037\213"	/* Magic header for gzip files, 1F 8B */
 
 /* gzip flag byte */
-#define ASCII_FLAG   0x01		/* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02		/* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04		/* bit 2 set: extra field present */
-#define ORIG_NAME    0x08		/* bit 3 set: original file name present */
-#define COMMENT      0x10		/* bit 4 set: file comment present */
-#define ENCRYPTED    0x20		/* bit 5 set: file is encrypted */
-#define RESERVED     0xC0		/* bit 6,7:   reserved */
-
-#ifndef WSIZE
-#  define WSIZE 0x8000			/* window size--must be a power of two, and */
-#endif							/*  at least 32K for zip's deflate method */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
+#define EXTRA_FIELD  0x04	/* bit 2 set: extra field present */
+#define ORIG_NAME    0x08	/* bit 3 set: original file name present */
+#define COMMENT      0x10	/* bit 4 set: file comment present */
+#define WSIZE 0x8000		/* window size--must be a power of two, and */
+				/*  at least 32K for zip's deflate method */
 
-#define MAX_DIST  (WSIZE-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-extern int exit_code;			/* program exit code */
-extern int verbose;				/* be verbose (-v) */
-extern int level;				/* compression level */
-extern int test;				/* check .z file integrity */
-extern int save_orig_name;		/* set if original name must be saved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf(0))
-#define try_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf(1))
-
-/* put_byte is used for the compressed output, put_ubyte for the
- * uncompressed output. However unlzw() uses window for its
- * suffix table instead of its output buffer, so it does not use put_ubyte
- * (to be cleaned up).
- */
-#define put_byte(c) {outbuf[outcnt++]=(uch)(c); if (outcnt==OUTBUFSIZ)\
-   flush_outbuf();}
-#define put_ubyte(c) {window[outcnt++]=(uch)(c); if (outcnt==WSIZE)\
-   flush_window();}
-
-/* Output a 16 bit value, lsb first */
-#define put_short(w) \
-{ if (outcnt < OUTBUFSIZ-2) { \
-    outbuf[outcnt++] = (uch) ((w) & 0xff); \
-    outbuf[outcnt++] = (uch) ((ush)(w) >> 8); \
-  } else { \
-    put_byte((uch)((w) & 0xff)); \
-    put_byte((uch)((ush)(w) >> 8)); \
-  } \
-}
-
-/* Output a 32 bit value to the bit stream, lsb first */
-#define put_long(n) { \
-    put_short((n) & 0xffff); \
-    put_short(((ulg)(n)) >> 16); \
-}
+/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
+#define BMAX 16		/* maximum bit length of any code (16 for explode) */
+#define N_MAX 288		/* maximum number of codes in any set */
 
-#define seekable()    0			/* force sequential output */
-#define translate_eol 0			/* no option -a yet */
+/* PKZIP header definitions */
+#define LOCSIG 0x04034b50L	/* four-byte lead-in (lsb first) */
+#define LOCCRC 14		/* offset of crc */
+#define LOCLEN 22		/* offset of uncompressed length */
+#define EXTHDR 16		/* size of extended local header, inc sig */
 
-#define tolow(c)  (isupper(c) ? (c)-'A'+'a' : (c))	/* force to lower case */
-
-/* Macros for getting two-byte and four-byte header values */
-#define SH(p) ((ush)(uch)((p)[0]) | ((ush)(uch)((p)[1]) << 8))
-#define LG(p) ((ulg)(SH(p)) | ((ulg)(SH((p)+2)) << 16))
+#define BITS 16
 
 /* Diagnostic functions */
 #ifdef DEBUG
@@ -331,175 +128,6 @@ extern int save_orig_name;		/* set if original name must be saved */
 #  define Tracecv(c,x)
 #endif
 
-#define WARN(msg) {fprintf msg ; \
-		   if (exit_code == OK) exit_code = WARNING;}
-
-	/* in unzip.c */
-extern int unzip (int in, int out);
-
-	/* in gzip.c */
-RETSIGTYPE abort_gzip (void);
-
-		/* in deflate.c */
-void lm_init (int pack_level, ush * flags);
-ulg deflate (void);
-
-		/* in trees.c */
-void ct_init (ush * attr, int *method);
-int ct_tally (int dist, int lc);
-ulg flush_block (char *buf, ulg stored_len, int eof);
-
-		/* in bits.c */
-void bi_init (file_t zipfile);
-void send_bits (int value, int length);
-unsigned bi_reverse (unsigned value, int length);
-void bi_windup (void);
-void copy_block (char *buf, unsigned len, int header);
-
-	/* in util.c: */
-extern ulg updcrc (uch * s, unsigned n);
-extern void clear_bufs (void);
-static int fill_inbuf (int eof_ok);
-extern void flush_outbuf (void);
-static void flush_window (void);
-extern void write_buf (int fd, void * buf, unsigned cnt);
-
-void read_error_msg (void);
-void write_error_msg (void);
-
-	/* in inflate.c */
-static int inflate (void);
-
-/* #include "lzw.h" */
-
-/* lzw.h -- define the lzw functions.
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
-
-#if !defined(OF) && defined(lint)
-#  include "gzip.h"
-#endif
-
-#ifndef BITS
-#  define BITS 16
-#endif
-#define INIT_BITS 9				/* Initial number of bits per code */
-
-#define	LZW_MAGIC  "\037\235"	/* Magic header for lzw files, 1F 9D */
-
-#define BIT_MASK    0x1f		/* Mask for 'number of compression bits' */
-/* Mask 0x20 is reserved to mean a fourth header byte, and 0x40 is free.
- * It's a pity that old uncompress does not check bit 0x20. That makes
- * extension of the format actually undesirable because old compress
- * would just crash on the new format instead of giving a meaningful
- * error message. It does check the number of bits, but it's more
- * helpful to say "unsupported format, get a new version" than
- * "can only handle 16 bits".
- */
-
-#define BLOCK_MODE  0x80
-/* Block compression: if table is full and compression rate is dropping,
- * clear the dictionary.
- */
-
-#define LZW_RESERVED 0x60		/* reserved bits */
-
-#define	CLEAR  256				/* flush the dictionary */
-#define FIRST  (CLEAR+1)		/* first free entry */
-
-extern int maxbits;				/* max bits per code for LZW */
-extern int block_mode;			/* block compress mode -C compatible with 2.0 */
-
-extern int lzw (int in, int out);
-extern int unlzw (int in, int out);
-
-
-/* #include "revision.h" */
-
-/* revision.h -- define the version number
- * Copyright (C) 1992-1993 Jean-loup Gailly.
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
-
-#define VERSION "1.2.4"
-#define PATCHLEVEL 0
-#define REVDATE "18 Aug 93"
-
-/* This version does not support compression into old compress format: */
-#ifdef LZW
-#  undef LZW
-#endif
-
-#include <time.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#if defined(DIRENT)
-#  include <dirent.h>
-typedef struct dirent dir_type;
-
-#  define NLENGTH(dirent) ((int)strlen((dirent)->d_name))
-#  define DIR_OPT "DIRENT"
-#else
-#  define NLENGTH(dirent) ((dirent)->d_namlen)
-#  ifdef SYSDIR
-#    include <sys/dir.h>
-typedef struct direct dir_type;
-
-#    define DIR_OPT "SYSDIR"
-#  else
-#    ifdef SYSNDIR
-#      include <sys/ndir.h>
-typedef struct direct dir_type;
-
-#      define DIR_OPT "SYSNDIR"
-#    else
-#      ifdef NDIR
-#        include <ndir.h>
-typedef struct direct dir_type;
-
-#        define DIR_OPT "NDIR"
-#      else
-#        define NO_DIR
-#        define DIR_OPT "NO_DIR"
-#      endif
-#    endif
-#  endif
-#endif
-#if !defined(S_ISDIR) && defined(S_IFDIR)
-#  define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-#endif
-#if !defined(S_ISREG) && defined(S_IFREG)
-#  define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-#endif
-typedef RETSIGTYPE(*sig_type) (int);
-
-#ifndef	O_BINARY
-#  define  O_BINARY  0			/* creation mode for open() */
-#endif
-
-#ifndef O_CREAT
-   /* Pure BSD system? */
-#  include <sys/file.h>
-#  ifndef O_CREAT
-#    define O_CREAT FCREAT
-#  endif
-#  ifndef O_EXCL
-#    define O_EXCL FEXCL
-#  endif
-#endif
-
-#ifndef S_IRUSR
-#  define S_IRUSR 0400
-#endif
-#ifndef S_IWUSR
-#  define S_IWUSR 0200
-#endif
-#define RW_USER (S_IRUSR | S_IWUSR)	/* creation mode for open() */
-
 #ifndef MAX_PATH_LEN			/* max pathname length */
 #  ifdef BUFSIZ
 #    define MAX_PATH_LEN   BUFSIZ
@@ -508,241 +136,139 @@ typedef RETSIGTYPE(*sig_type) (int);
 #  endif
 #endif
 
-#ifndef SEEK_END
-#  define SEEK_END 2
-#endif
+#define NEXTBYTE()  (uch)get_byte()
+#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
+#define DUMPBITS(n) {b>>=(n);k-=(n);}
 
-#ifdef NO_OFF_T
-typedef long off_t;
-off_t lseek (int fd, off_t offset, int whence);
-#endif
+#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf(0))
 
+/* Macros for getting two-byte and four-byte header values */
+#define SH(p) ((ush)(uch)((p)[0]) | ((ush)(uch)((p)[1]) << 8))
+#define LG(p) ((ulg)(SH(p)) | ((ulg)(SH((p)+2)) << 16))
 
-		/* global buffers */
+	/* in gzip.c */
+void abort_gzip (void);
+typedef void (*sig_type) (int);
 
-DECLARE(uch, inbuf, INBUFSIZ + INBUF_EXTRA);
-DECLARE(uch, outbuf, OUTBUFSIZ + OUTBUF_EXTRA);
-DECLARE(ush, d_buf, DIST_BUFSIZE);
-DECLARE(uch, window, 2L * WSIZE);
-#ifndef MAXSEG_64K
-DECLARE(ush, tab_prefix, 1L << BITS);
-#else
-DECLARE(ush, tab_prefix0, 1L << (BITS - 1));
-DECLARE(ush, tab_prefix1, 1L << (BITS - 1));
-#endif
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+typedef int file_t;				/* Do not use stdio */
 
-		/* local variables */
+uch *inbuf;
+uch *outbuf;
+ush *d_buf;
+uch *window;
+ush *tab_prefix0;
+ush *tab_prefix1;
+
+/* local variables */
+int test_mode = 0;	/* check file integrity option */
+int foreground;		/* set if program run in foreground */
+int maxbits = BITS;	/* max bits per code for LZW */
+int method = DEFLATED;	/* compression method */
+int exit_code = OK;	/* program exit code */
+int last_member;	/* set for .zip and .Z files */
+int part_nb;		/* number of parts in .gz file */
+long ifile_size;	/* input file size, -1 for devices (debug only) */
+long bytes_in;		/* number of input bytes */
+long bytes_out;		/* number of output bytes */
+long total_in = 0;	/* input bytes for all files */
+long total_out = 0;	/* output bytes for all files */
+struct stat istat;	/* status for input file */
+int ifd;		/* input file descriptor */
+int ofd;		/* output file descriptor */
+unsigned insize;	/* valid bytes in inbuf */
+unsigned inptr;		/* index of next byte to be processed in inbuf */
+unsigned outcnt;	/* bytes in output buffer */
+
+unsigned hufts;		/* track memory usage */
+ulg bb;			/* bit buffer */
+unsigned bk;		/* bits in bit buffer */
+int crc_table_empty = 1;
 
-int test_mode = 0;				/* check file integrity option */
-int foreground;					/* set if program run in foreground */
-int maxbits = BITS;				/* max bits per code for LZW */
-int method = DEFLATED;			/* compression method */
-int exit_code = OK;				/* program exit code */
-int last_member;				/* set for .zip and .Z files */
-int part_nb;					/* number of parts in .gz file */
-long ifile_size;				/* input file size, -1 for devices (debug only) */
+struct huft {
+	uch e;		/* number of extra bits or operation */
+	uch b;		/* number of bits in this code or subcode */
+	union {
+		ush n;		/* literal, length base, or distance base */
+		struct huft *t;	/* pointer to next level of table */
+	} v;
+};
 
-long bytes_in;					/* number of input bytes */
-long bytes_out;					/* number of output bytes */
-long total_in = 0;				/* input bytes for all files */
-long total_out = 0;				/* output bytes for all files */
-struct stat istat;				/* status for input file */
-int ifd;						/* input file descriptor */
-int ofd;						/* output file descriptor */
-unsigned insize;				/* valid bytes in inbuf */
-unsigned inptr;					/* index of next byte to be processed in inbuf */
-unsigned outcnt;				/* bytes in output buffer */
+/* Tables for deflate from PKZIP's appnote.txt. */
+static unsigned border[] = {	/* Order of the bit length code lengths */
+	16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
+};
+static ush cplens[] = {		/* Copy lengths for literal codes 257..285 */
+	3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+	35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0
+};
 
-long header_bytes;				/* number of bytes in gzip header */
+/* note: see note #13 above about the 258 in this list. */
+static ush cplext[] = {		/* Extra bits for literal codes 257..285 */
+	0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
+	3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99
+};				/* 99==invalid */
 
-/* local functions */
+static ush cpdist[] = {		/* Copy offsets for distance codes 0..29 */
+	1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+	257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+	8193, 12289, 16385, 24577
+};
 
-local int get_method (int in);
+static ush cpdext[] = {		/* Extra bits for distance codes */
+	0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
+	7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
+	12, 12, 13, 13
+};
 
-#define strequ(s1, s2) (strcmp((s1),(s2)) == 0)
+ush mask_bits[] = {
+	0x0000,
+	0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
+	0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
+};
 
-/* ======================================================================== */
-int gunzip_main(int argc, char **argv)
+/* ========================================================================
+ * Error handlers.
+ */
+void read_error_msg()
 {
-	int file_count;				/* number of files to precess */
-	int tostdout = 0;
-	int fromstdin = 0;
-	int result;
-	int inFileNum;
-	int outFileNum;
-	int delInputFile = 0;
-	int force = 0;
-	struct stat statBuf;
-	char *delFileName;
-	char ifname[MAX_PATH_LEN + 1];	/* input file name */
-	char ofname[MAX_PATH_LEN + 1];	/* output file name */
-
-	if (strcmp(applet_name, "zcat") == 0) {
-		force = 1;
-		tostdout = 1;
-	}
-
-	/* Parse any options */
-	while (--argc > 0 && **(++argv) == '-') {
-		if (*((*argv) + 1) == '\0') {
-			tostdout = 1;
-		}
-		while (*(++(*argv))) {
-			switch (**argv) {
-			case 'c':
-				tostdout = 1;
-				break;
-			case 't':
-				test_mode = 1;
-				break;
-			case 'f':
-				force = 1;
-				break;
-			default:
-				usage(gunzip_usage);
-			}
-		}
-	}
-
-	if (argc <= 0) {
-		tostdout = 1;
-		fromstdin = 1;
-	}
-
-	if (isatty(fileno(stdin)) && fromstdin==1 && force==0)
-		fatalError( "data not read from terminal. Use -f to force it.\n");
-	if (isatty(fileno(stdout)) && tostdout==1 && force==0)
-		fatalError( "data not written to terminal. Use -f to force it.\n");
-
-
-	foreground = signal(SIGINT, SIG_IGN) != SIG_IGN;
-	if (foreground) {
-		(void) signal(SIGINT, (sig_type) abort_gzip);
-	}
-#ifdef SIGTERM
-	if (signal(SIGTERM, SIG_IGN) != SIG_IGN) {
-		(void) signal(SIGTERM, (sig_type) abort_gzip);
-	}
-#endif
-#ifdef SIGHUP
-	if (signal(SIGHUP, SIG_IGN) != SIG_IGN) {
-		(void) signal(SIGHUP, (sig_type) abort_gzip);
-	}
-#endif
-
-	file_count = argc - optind;
-
-	/* Allocate all global buffers (for DYN_ALLOC option) */
-	ALLOC(uch, inbuf, INBUFSIZ + INBUF_EXTRA);
-	ALLOC(uch, outbuf, OUTBUFSIZ + OUTBUF_EXTRA);
-	ALLOC(ush, d_buf, DIST_BUFSIZE);
-	ALLOC(uch, window, 2L * WSIZE);
-#ifndef MAXSEG_64K
-	ALLOC(ush, tab_prefix, 1L << BITS);
-#else
-	ALLOC(ush, tab_prefix0, 1L << (BITS - 1));
-	ALLOC(ush, tab_prefix1, 1L << (BITS - 1));
-#endif
-
-	if (fromstdin == 1) {
-		strcpy(ofname, "stdin");
-
-		inFileNum = fileno(stdin);
-		ifile_size = -1L;		/* convention for unknown size */
+	fprintf(stderr, "\n");
+	if (errno != 0) {
+		perror("");
 	} else {
-		/* Open up the input file */
-		if (argc <= 0)
-			usage(gunzip_usage);
-		if (strlen(*argv) > MAX_PATH_LEN) {
-			errorMsg(name_too_long);
-			exit(WARNING);
-		}
-		strcpy(ifname, *argv);
-
-		/* Open input fille */
-		inFileNum = open(ifname, O_RDONLY);
-		if (inFileNum < 0) {
-			perror(ifname);
-			exit(WARNING);
-		}
-		/* Get the time stamp on the input file. */
-		result = stat(ifname, &statBuf);
-		if (result < 0) {
-			perror(ifname);
-			exit(WARNING);
-		}
-		ifile_size = statBuf.st_size;
+		fprintf(stderr, "unexpected end of file\n");
 	}
+	abort_gzip();
+}
 
-	if (tostdout == 1) {
-		/* And get to work */
-		strcpy(ofname, "stdout");
-		outFileNum = fileno(stdout);
-
-		clear_bufs();			/* clear input and output buffers */
-		part_nb = 0;
-
-		/* Actually do the compression/decompression. */
-		unzip(inFileNum, outFileNum);
-
-	} else if (test_mode) {
-		/* Actually do the compression/decompression. */
-		unzip(inFileNum, 2);
-	} else {
-		char *pos;
-
-		/* And get to work */
-		if (strlen(ifname) > MAX_PATH_LEN - 4) {
-			errorMsg(name_too_long);
-			exit(WARNING);
-		}
-		strcpy(ofname, ifname);
-		pos = strstr(ofname, ".gz");
-		if (pos != NULL) {
-			*pos = '\0';
-			delInputFile = 1;
-		} else {
-			pos = strstr(ofname, ".tgz");
-			if (pos != NULL) {
-				*pos = '\0';
-				strcat(pos, ".tar");
-				delInputFile = 1;
-			}
-		}
-
-		/* Open output fille */
-#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
-		outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL | O_NOFOLLOW);
-#else
-		outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL);
-#endif
-		if (outFileNum < 0) {
-			perror(ofname);
-			exit(WARNING);
-		}
-		/* Set permissions on the file */
-		fchmod(outFileNum, statBuf.st_mode);
-
-		clear_bufs();			/* clear input and output buffers */
-		part_nb = 0;
-
-		/* Actually do the compression/decompression. */
-		result = unzip(inFileNum, outFileNum);
+/* ===========================================================================
+ * Fill the input buffer. This is called only when the buffer is empty.
+ */
+int fill_inbuf(eof_ok)
+int eof_ok;		/* set if EOF acceptable as a result */
+{
+	int len;
 
-		close(outFileNum);
-		close(inFileNum);
-		/* Delete the original file */
-		if (result == OK)
-			delFileName = ifname;
-		else
-			delFileName = ofname;
+	/* Read as much as possible */
+	insize = 0;
+	errno = 0;
+	do {
+		len = read(ifd, (char *) inbuf + insize, INBUFSIZ - insize);
+		if (len == 0 || len == EOF)
+			break;
+		insize += len;
+	} while (insize < INBUFSIZ);
 
-		if (delInputFile == 1 && unlink(delFileName) < 0) {
-			perror(delFileName);
-			exit(FALSE);
-		}
+	if (insize == 0) {
+		if (eof_ok)
+			return EOF;
+		read_error_msg();
 	}
-	return(exit_code);
+	bytes_in += (ulg) insize;
+	inptr = 1;
+	return inbuf[0];
 }
 
 
@@ -757,17 +283,17 @@ int gunzip_main(int argc, char **argv)
  * IN assertions: there is at least one remaining compressed member.
  *   If the member is a zip file, it must be the only one.
  */
-local int get_method(in)
-int in;							/* input file descriptor */
+static int get_method(in)
+int in;					/* input file descriptor */
 {
-	uch flags;					/* compression flags */
-	char magic[2];				/* magic header */
+	uch flags;			/* compression flags */
+	char magic[2];			/* magic header */
+	long header_bytes = 0;		/* number of bytes in gzip header */
 
 	magic[0] = (char) get_byte();
 	magic[1] = (char) get_byte();
-	method = -1;				/* unknown yet */
-	part_nb++;					/* number of parts in gzip file */
-	header_bytes = 0;
+	method = -1;			/* unknown yet */
+	part_nb++;			/* number of parts in gzip file */
 	last_member = RECORD_IO;
 	/* assume multiple members in gzip file except for record oriented I/O */
 
@@ -775,8 +301,7 @@ int in;							/* input file descriptor */
 
 		method = (int) get_byte();
 		if (method != DEFLATED) {
-			errorMsg("unknown method %d -- get newer version of gzip\n",
-					method);
+			errorMsg("unknown method %d -- get newer version of gzip\n", method);
 			exit_code = ERROR;
 			return -1;
 		}
@@ -792,22 +317,19 @@ int in;							/* input file descriptor */
 
 		if ((flags & EXTRA_FIELD) != 0) {
 			unsigned len = (unsigned) get_byte();
-
 			len |= ((unsigned) get_byte()) << 8;
-
 			while (len--)
 				(void) get_byte();
 		}
 
 		/* Discard original name if any */
 		if ((flags & ORIG_NAME) != 0) {
-			while (get_char() != 0)	/* null */
-				;
+			while (get_byte() != 0);	/* null */
 		}
 
 		/* Discard file comment if any */
 		if ((flags & COMMENT) != 0) {
-			while (get_char() != 0)	/* null */
+			while (get_byte() != 0)	/* null */
 				;
 		}
 		if (part_nb == 1) {
@@ -824,7 +346,9 @@ int in;							/* input file descriptor */
 		exit_code = ERROR;
 		return -1;
 	} else {
-		WARN((stderr, "\ndecompression OK, trailing garbage ignored\n"));
+		fprintf(stderr, "\ndecompression OK, trailing garbage ignored\n");
+		if (exit_code == OK)
+			exit_code = WARNING;
 		return -2;
 	}
 }
@@ -832,184 +356,49 @@ int in;							/* input file descriptor */
 /* ========================================================================
  * Signal and error handler.
  */
-RETSIGTYPE abort_gzip()
+void abort_gzip()
 {
 	exit(ERROR);
 }
 
-/* unzip.c -- decompress files in gzip or pkzip format.
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- *
- * The code in this file is derived from the file funzip.c written
- * and put in the public domain by Mark Adler.
- */
-
-/*
-   This version can extract files in gzip or pkzip format.
-   For the latter, only the first entry is extracted, and it has to be
-   either deflated or stored.
- */
-
-/* #include "crypt.h" */
-
-/* crypt.h (dummy version) -- do not perform encryption
- * Hardly worth copyrighting :-)
- */
-
-#ifdef CRYPT
-#  undef CRYPT					/* dummy version */
-#endif
-
-#define RAND_HEAD_LEN  12		/* length of encryption random header */
-
-#define zencode
-#define zdecode
-
-/* PKZIP header definitions */
-#define LOCSIG 0x04034b50L		/* four-byte lead-in (lsb first) */
-#define LOCFLG 6				/* offset of bit flag */
-#define  CRPFLG 1				/*  bit for encrypted entry */
-#define  EXTFLG 8				/*  bit for extended local header */
-#define LOCHOW 8				/* offset of compression method */
-#define LOCTIM 10				/* file mod time (for decryption) */
-#define LOCCRC 14				/* offset of crc */
-#define LOCSIZ 18				/* offset of compressed size */
-#define LOCLEN 22				/* offset of uncompressed length */
-#define LOCFIL 26				/* offset of file name field length */
-#define LOCEXT 28				/* offset of extra field length */
-#define LOCHDR 30				/* size of local header, including sig */
-#define EXTHDR 16				/* size of extended local header, inc sig */
-
-
-/* Globals */
-
-char *key;						/* not used--needed to link crypt.c */
-int pkzip = 0;					/* set for a pkzip file */
-int ext_header = 0;				/* set if extended local header */
-
-/* ===========================================================================
- * Unzip in to out.  This routine works on both gzip and pkzip files.
- *
- * IN assertions: the buffer inbuf contains already the beginning of
- *   the compressed data, from offsets inptr to insize-1 included.
- *   The magic header has already been checked. The output buffer is cleared.
- */
-int unzip(in, out)
-int in, out;					/* input and output file descriptors */
-{
-	ulg orig_crc = 0;			/* original crc */
-	ulg orig_len = 0;			/* original uncompressed length */
-	int n;
-	uch buf[EXTHDR];			/* extended local header */
-
-	ifd = in;
-	ofd = out;
-	method = get_method(ifd);
-	if (method < 0) {
-		exit(exit_code);		/* error message already emitted */
-	}
-
-	updcrc(NULL, 0);			/* initialize crc */
-
-	if (pkzip && !ext_header) {	/* crc and length at the end otherwise */
-		orig_crc = LG(inbuf + LOCCRC);
-		orig_len = LG(inbuf + LOCLEN);
-	}
-
-	/* Decompress */
-	if (method == DEFLATED) {
-
-		int res = inflate();
-
-		if (res == 3) {
-			errorMsg(memory_exhausted);
-		} else if (res != 0) {
-			errorMsg("invalid compressed data--format violated");
-		}
-
-	} else {
-		errorMsg("internal error, invalid method");
-	}
-
-	/* Get the crc and original length */
-	if (!pkzip) {
-		/* crc32  (see algorithm.doc)
-		   * uncompressed input size modulo 2^32
-		 */
-		for (n = 0; n < 8; n++) {
-			buf[n] = (uch) get_byte();	/* may cause an error if EOF */
-		}
-		orig_crc = LG(buf);
-		orig_len = LG(buf + 4);
-
-	} else if (ext_header) {	/* If extended header, check it */
-		/* signature - 4bytes: 0x50 0x4b 0x07 0x08
-		 * CRC-32 value
-		 * compressed size 4-bytes
-		 * uncompressed size 4-bytes
-		 */
-		for (n = 0; n < EXTHDR; n++) {
-			buf[n] = (uch) get_byte();	/* may cause an error if EOF */
-		}
-		orig_crc = LG(buf + 4);
-		orig_len = LG(buf + 12);
-	}
-
-	/* Validate decompression */
-	if (orig_crc != updcrc(outbuf, 0)) {
-		errorMsg("invalid compressed data--crc error");
-	}
-	if (orig_len != (ulg) bytes_out) {
-		errorMsg("invalid compressed data--length error");
-	}
-
-	/* Check if there are more entries in a pkzip file */
-	if (pkzip && inptr + 4 < insize && LG(inbuf + inptr) == LOCSIG) {
-		WARN((stderr, "has more than one entry--rest ignored\n"));
-	}
-	ext_header = pkzip = 0;		/* for next file */
-	return OK;
-}
-
-/* util.c -- utility functions for gzip support
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * This is free software; you can redistribute it and/or modify it under the
- * terms of the GNU General Public License, see the file COPYING.
- */
-
-#include <ctype.h>
-#include <errno.h>
-#include <sys/types.h>
-
-#ifdef HAVE_UNISTD_H
-#  include <unistd.h>
-#endif
-#ifndef NO_FCNTL_H
-#  include <fcntl.h>
-#endif
-
-#if defined(STDC_HEADERS) || !defined(NO_STDLIB_H)
-#  include <stdlib.h>
-#else
-extern int errno;
-#endif
-
-static const ulg crc_32_tab[];	/* crc table, defined below */
-
 /* ===========================================================================
  * Run a set of bytes through the crc shift register.  If s is a NULL
  * pointer, then initialize the crc shift register contents instead.
  * Return the current crc in either case.
  */
 ulg updcrc(s, n)
-uch *s;							/* pointer to bytes to pump through */
-unsigned n;						/* number of bytes in s[] */
+uch *s;					/* pointer to bytes to pump through */
+unsigned n;				/* number of bytes in s[] */
 {
-	register ulg c;				/* temporary variable */
-
 	static ulg crc = (ulg) 0xffffffffL;	/* shift register contents */
+	register ulg c;				/* temporary variable */
+	static unsigned long crc_32_tab[256];
+	if (crc_table_empty) {
+		unsigned long c;      /* crc shift register */
+		unsigned long e;      /* polynomial exclusive-or pattern */
+		int i;                /* counter for all possible eight bit values */
+		int k;                /* byte being shifted into crc apparatus */
+
+		/* terms of polynomial defining this crc (except x^32): */
+		static int p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+		/* Make exclusive-or pattern from polynomial (0xedb88320) */
+		e = 0;
+		for (i = 0; i < sizeof(p)/sizeof(int); i++)
+			e |= 1L << (31 - p[i]);
+
+		/* Compute and print table of CRC's, five per line */
+		crc_32_tab[0] = 0x00000000L;
+		for (i = 1; i < 256; i++) {
+			c = i;
+ 		   /* The idea to initialize the register with the byte instead of
+		     * zero was stolen from Haruhiko Okumura's ar002
+		     */
+			for (k = 8; k; k--)
+				c = c & 1 ? (c >> 1) ^ e : c >> 1;
+			crc_32_tab[i]=c;
+		}
+	}
 
 	if (s == NULL) {
 		c = 0xffffffffL;
@@ -1024,57 +413,31 @@ unsigned n;						/* number of bytes in s[] */
 	return c ^ 0xffffffffL;		/* (instead of ~c for 64-bit machines) */
 }
 
-/* ===========================================================================
- * Clear input and output buffers
- */
-void clear_bufs(void)
+void write_error_msg()
 {
-	outcnt = 0;
-	insize = inptr = 0;
-	bytes_in = bytes_out = 0L;
+	fprintf(stderr, "\n");
+	perror("");
+	abort_gzip();
 }
 
 /* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty.
+ * Does the same as write(), but also handles partial pipe writes and checks
+ * for error return.
  */
-int fill_inbuf(eof_ok)
-int eof_ok;						/* set if EOF acceptable as a result */
+void write_buf(fd, buf, cnt)
+int fd;
+void * buf;
+unsigned cnt;
 {
-	int len;
-
-	/* Read as much as possible */
-	insize = 0;
-	errno = 0;
-	do {
-		len = read(ifd, (char *) inbuf + insize, INBUFSIZ - insize);
-		if (len == 0 || len == EOF)
-			break;
-		insize += len;
-	} while (insize < INBUFSIZ);
+	unsigned n;
 
-	if (insize == 0) {
-		if (eof_ok)
-			return EOF;
-		read_error_msg();
+	while ((n = write(fd, buf, cnt)) != cnt) {
+		if (n == (unsigned) (-1)) {
+			write_error_msg();
+		}
+		cnt -= n;
+		buf = (void *) ((char *) buf + n);
 	}
-	bytes_in += (ulg) insize;
-	inptr = 1;
-	return inbuf[0];
-}
-
-/* ===========================================================================
- * Write the output buffer outbuf[0..outcnt-1] and update bytes_out.
- * (used for the compressed data only)
- */
-void flush_outbuf()
-{
-	if (outcnt == 0)
-		return;
-
-	if (!test_mode)
-		write_buf(ofd, (char *) outbuf, outcnt);
-	bytes_out += (ulg) outcnt;
-	outcnt = 0;
 }
 
 /* ===========================================================================
@@ -1093,440 +456,80 @@ void flush_window()
 	outcnt = 0;
 }
 
-/* ===========================================================================
- * Does the same as write(), but also handles partial pipe writes and checks
- * for error return.
- */
-void write_buf(fd, buf, cnt)
-int fd;
-void * buf;
-unsigned cnt;
+int inflate_stored()
+/* "decompress" an inflated type 0 (stored) block. */
 {
-	unsigned n;
-
-	while ((n = write(fd, buf, cnt)) != cnt) {
-		if (n == (unsigned) (-1)) {
-			write_error_msg();
-		}
-		cnt -= n;
-		buf = (void *) ((char *) buf + n);
-	}
-}
-
-#if defined(NO_STRING_H) && !defined(STDC_HEADERS)
-
-/* Provide missing strspn and strcspn functions. */
+	unsigned n;			/* number of bytes in block */
+	unsigned w;			/* current window position */
+	register ulg b;			/* bit buffer */
+	register unsigned k;		/* number of bits in bit buffer */
 
-#  ifndef __STDC__
-#    define const
-#  endif
+	/* make local copies of globals */
+	b = bb;				/* initialize bit buffer */
+	k = bk;
+	w = outcnt;			/* initialize window position */
 
-int strspn (const char *s, const char *accept);
-int strcspn (const char *s, const char *reject);
+	/* go to byte boundary */
+	n = k & 7;
+	DUMPBITS(n);
 
-/* ========================================================================
- * Return the length of the maximum initial segment
- * of s which contains only characters in accept.
- */
-int strspn(s, accept)
-const char *s;
-const char *accept;
-{
-	register const char *p;
-	register const char *a;
-	register int count = 0;
+	/* get the length and its complement */
+	NEEDBITS(16)
+		n = ((unsigned) b & 0xffff);
+	DUMPBITS(16)
+		NEEDBITS(16)
+		if (n != (unsigned) ((~b) & 0xffff))
+		return 1;		/* error in compressed data */
+	DUMPBITS(16)
 
-	for (p = s; *p != '\0'; ++p) {
-		for (a = accept; *a != '\0'; ++a) {
-			if (*p == *a)
-				break;
+		/* read and output the compressed data */
+		while (n--) {
+		NEEDBITS(8)
+			window[w++] = (uch) b;
+		if (w == WSIZE) {
+//			flush_output(w);
+				outcnt=(w),
+				flush_window();
+			w = 0;
 		}
-		if (*a == '\0')
-			return count;
-		++count;
+		DUMPBITS(8)
 	}
-	return count;
-}
 
-/* ========================================================================
- * Return the length of the maximum inital segment of s
- * which contains no characters from reject.
- */
-int strcspn(s, reject)
-const char *s;
-const char *reject;
-{
-	register int count = 0;
-
-	while (*s != '\0') {
-		if (strchr(reject, *s++) != NULL)
-			return count;
-		++count;
-	}
-	return count;
+	/* restore the globals from the locals */
+	outcnt = w;			/* restore global window pointer */
+	bb = b;				/* restore global bit buffer */
+	bk = k;
+	return 0;
 }
 
-#endif							/* NO_STRING_H */
-
+int huft_free(t)
+struct huft *t;				/* table to free */
 
-/* ========================================================================
- * Error handlers.
- */
-void read_error_msg()
+/* Free the malloc'ed tables built by huft_build(), which makes a linked
+   list of the tables it made, with the links in a dummy first entry of
+   each table. */
 {
-	fprintf(stderr, "\n");
-	if (errno != 0) {
-		perror("");
-	} else {
-		fprintf(stderr, "unexpected end of file\n");
-	}
-	abort_gzip();
-}
+	register struct huft *p, *q;
 
-void write_error_msg()
-{
-	fprintf(stderr, "\n");
-	perror("");
-	abort_gzip();
+	/* Go through linked list, freeing from the malloced (t[-1]) address. */
+	p = t;
+	while (p != (struct huft *) NULL) {
+		q = (--p)->v.t;
+		free((char *) p);
+		p = q;
+	}
+	return 0;
 }
 
 
-/* ========================================================================
- * Table of CRC-32's of all single-byte values (made by makecrc.c)
- */
-static const ulg crc_32_tab[] = {
-	0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
-	0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
-	0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
-	0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL,
-	0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L,
-	0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L,
-	0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L,
-	0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL,
-	0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L,
-	0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL,
-	0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L,
-	0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L,
-	0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L,
-	0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL,
-	0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL,
-	0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L,
-	0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL,
-	0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L,
-	0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L,
-	0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L,
-	0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL,
-	0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L,
-	0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L,
-	0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL,
-	0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L,
-	0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L,
-	0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L,
-	0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L,
-	0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L,
-	0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL,
-	0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL,
-	0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L,
-	0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L,
-	0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL,
-	0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL,
-	0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L,
-	0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL,
-	0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L,
-	0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL,
-	0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L,
-	0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL,
-	0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L,
-	0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L,
-	0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL,
-	0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L,
-	0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L,
-	0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L,
-	0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L,
-	0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L,
-	0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L,
-	0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL,
-	0x2d02ef8dL
-};
-
-/* inflate.c -- Not copyrighted 1992 by Mark Adler
-   version c10p1, 10 January 1993 */
-
-/* You can do whatever you like with this source file, though I would
-   prefer that if you modify it and redistribute it that you include
-   comments to that effect with your name and the date.  Thank you.
-   [The history has been moved to the file ChangeLog.]
- */
-
-/*
-   Inflate deflated (PKZIP's method 8 compressed) data.  The compression
-   method searches for as much of the current string of bytes (up to a
-   length of 258) in the previous 32K bytes.  If it doesn't find any
-   matches (of at least length 3), it codes the next byte.  Otherwise, it
-   codes the length of the matched string and its distance backwards from
-   the current position.  There is a single Huffman code that codes both
-   single bytes (called "literals") and match lengths.  A second Huffman
-   code codes the distance information, which follows a length code.  Each
-   length or distance code actually represents a base value and a number
-   of "extra" (sometimes zero) bits to get to add to the base value.  At
-   the end of each deflated block is a special end-of-block (EOB) literal/
-   length code.  The decoding process is basically: get a literal/length
-   code; if EOB then done; if a literal, emit the decoded byte; if a
-   length then get the distance and emit the referred-to bytes from the
-   sliding window of previously emitted data.
-
-   There are (currently) three kinds of inflate blocks: stored, fixed, and
-   dynamic.  The compressor deals with some chunk of data at a time, and
-   decides which method to use on a chunk-by-chunk basis.  A chunk might
-   typically be 32K or 64K.  If the chunk is uncompressible, then the
-   "stored" method is used.  In this case, the bytes are simply stored as
-   is, eight bits per byte, with none of the above coding.  The bytes are
-   preceded by a count, since there is no longer an EOB code.
-
-   If the data is compressible, then either the fixed or dynamic methods
-   are used.  In the dynamic method, the compressed data is preceded by
-   an encoding of the literal/length and distance Huffman codes that are
-   to be used to decode this block.  The representation is itself Huffman
-   coded, and so is preceded by a description of that code.  These code
-   descriptions take up a little space, and so for small blocks, there is
-   a predefined set of codes, called the fixed codes.  The fixed method is
-   used if the block codes up smaller that way (usually for quite small
-   chunks), otherwise the dynamic method is used.  In the latter case, the
-   codes are customized to the probabilities in the current block, and so
-   can code it much better than the pre-determined fixed codes.
- 
-   The Huffman codes themselves are decoded using a mutli-level table
-   lookup, in order to maximize the speed of decoding plus the speed of
-   building the decoding tables.  See the comments below that precede the
-   lbits and dbits tuning parameters.
- */
-
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarly, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-#include <sys/types.h>
-
-#if defined(STDC_HEADERS) || !defined(NO_STDLIB_H)
-#  include <stdlib.h>
-#endif
-
-
-#define slide window
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model).
-   Valid extra bits are 0..13.  e == 15 is EOB (end of block), e == 16
-   means that v is a literal, 16 < e < 32 means that v is a pointer to
-   the next table, which codes e - 16 bits, and lastly e == 99 indicates
-   an unused code.  If a code with e == 99 is looked up, this implies an
-   error in the data. */
-struct huft {
-	uch e;						/* number of extra bits or operation */
-	uch b;						/* number of bits in this code or subcode */
-	union {
-		ush n;					/* literal, length base, or distance base */
-		struct huft *t;			/* pointer to next level of table */
-	} v;
-};
-
-
-/* Function prototypes */
-int huft_build (unsigned *, unsigned, unsigned, ush *, ush *,
-				   struct huft **, int *);
-int huft_free (struct huft *);
-int inflate_codes (struct huft *, struct huft *, int, int);
-int inflate_stored (void);
-int inflate_fixed (void);
-int inflate_dynamic (void);
-int inflate_block (int *);
-int inflate (void);
-
-
-/* The inflate algorithm uses a sliding 32K byte window on the uncompressed
-   stream to find repeated byte strings.  This is implemented here as a
-   circular buffer.  The index is updated simply by incrementing and then
-   and'ing with 0x7fff (32K-1). */
-/* It is left to other modules to supply the 32K area.  It is assumed
-   to be usable as if it were declared "uch slide[32768];" or as just
-   "uch *slide;" and then malloc'ed in the latter case.  The definition
-   must be in unzip.h, included above. */
-/* unsigned wp;             current position in slide */
-#define wp outcnt
-#define flush_output(w) (wp=(w),flush_window())
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-static unsigned border[] = {	/* Order of the bit length code lengths */
-	16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
-};
-static ush cplens[] = {			/* Copy lengths for literal codes 257..285 */
-	3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-	35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0
-};
-
-		/* note: see note #13 above about the 258 in this list. */
-static ush cplext[] = {			/* Extra bits for literal codes 257..285 */
-	0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-	3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 99, 99
-};								/* 99==invalid */
-static ush cpdist[] = {			/* Copy offsets for distance codes 0..29 */
-	1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-	257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-	8193, 12289, 16385, 24577
-};
-static ush cpdext[] = {			/* Extra bits for distance codes */
-	0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-	7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-	12, 12, 13, 13
-};
-
-
-
-/* Macros for inflate() bit peeking and grabbing.
-   The usage is:
-   
-        NEEDBITS(j)
-        x = b & mask_bits[j];
-        DUMPBITS(j)
-
-   where NEEDBITS makes sure that b has at least j bits in it, and
-   DUMPBITS removes the bits from b.  The macros use the variable k
-   for the number of bits in b.  Normally, b and k are register
-   variables for speed, and are initialized at the beginning of a
-   routine that uses these macros from a global bit buffer and count.
-
-   If we assume that EOB will be the longest code, then we will never
-   ask for bits with NEEDBITS that are beyond the end of the stream.
-   So, NEEDBITS should not read any more bytes than are needed to
-   meet the request.  Then no bytes need to be "returned" to the buffer
-   at the end of the last block.
-
-   However, this assumption is not true for fixed blocks--the EOB code
-   is 7 bits, but the other literal/length codes can be 8 or 9 bits.
-   (The EOB code is shorter than other codes because fixed blocks are
-   generally short.  So, while a block always has an EOB, many other
-   literal/length codes have a significantly lower probability of
-   showing up at all.)  However, by making the first table have a
-   lookup of seven bits, the EOB code will be found in that first
-   lookup, and so will not require that too many bits be pulled from
-   the stream.
- */
-
-ulg bb;							/* bit buffer */
-unsigned bk;					/* bits in bit buffer */
-
-ush mask_bits[] = {
-	0x0000,
-	0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-	0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-#ifdef CRYPT
-uch cc;
-
-#  define NEXTBYTE() (cc = get_byte(), zdecode(cc), cc)
-#else
-#  define NEXTBYTE()  (uch)get_byte()
-#endif
-#define NEEDBITS(n) {while(k<(n)){b|=((ulg)NEXTBYTE())<<k;k+=8;}}
-#define DUMPBITS(n) {b>>=(n);k-=(n);}
-
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-int lbits = 9;					/* bits in base literal/length lookup table */
-int dbits = 6;					/* bits in base distance lookup table */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
-#define BMAX 16					/* maximum bit length of any code (16 for explode) */
-#define N_MAX 288				/* maximum number of codes in any set */
-
-
-unsigned hufts;					/* track memory usage */
-
-
 int huft_build(b, n, s, d, e, t, m)
-unsigned *b;					/* code lengths in bits (all assumed <= BMAX) */
-unsigned n;						/* number of codes (assumed <= N_MAX) */
-unsigned s;						/* number of simple-valued codes (0..s-1) */
-ush *d;							/* list of base values for non-simple codes */
-ush *e;							/* list of extra bits for non-simple codes */
-struct huft **t;				/* result: starting table */
-int *m;							/* maximum lookup bits, returns actual */
+unsigned *b;			/* code lengths in bits (all assumed <= BMAX) */
+unsigned n;			/* number of codes (assumed <= N_MAX) */
+unsigned s;			/* number of simple-valued codes (0..s-1) */
+ush *d;				/* list of base values for non-simple codes */
+ush *e;				/* list of extra bits for non-simple codes */
+struct huft **t;		/* result: starting table */
+int *m;				/* maximum lookup bits, returns actual */
 
 /* Given a list of code lengths and a maximum table size, make a set of
    tables to decode that set of codes.  Return zero on success, one if
@@ -1534,81 +537,73 @@ int *m;							/* maximum lookup bits, returns actual */
    case), two if the input is invalid (all zero length codes or an
    oversubscribed set of lengths), and three if not enough memory. */
 {
-	unsigned a;					/* counter for codes of length k */
-	unsigned c[BMAX + 1];		/* bit length count table */
-	unsigned f;					/* i repeats in table every f entries */
-	int g;						/* maximum code length */
-	int h;						/* table level */
-	register unsigned i;		/* counter, current code */
-	register unsigned j;		/* counter */
-	register int k;				/* number of bits in current code */
-	int l;						/* bits per table (returned in m) */
+	unsigned a;		/* counter for codes of length k */
+	unsigned c[BMAX + 1];	/* bit length count table */
+	unsigned f;		/* i repeats in table every f entries */
+	int g;			/* maximum code length */
+	int h;			/* table level */
+	register unsigned i;	/* counter, current code */
+	register unsigned j;	/* counter */
+	register int k;		/* number of bits in current code */
+	int l;			/* bits per table (returned in m) */
 	register unsigned *p;		/* pointer into c[], b[], or v[] */
 	register struct huft *q;	/* points to current table */
-	struct huft r;				/* table entry for structure assignment */
-	struct huft *u[BMAX];		/* table stack */
-	unsigned v[N_MAX];			/* values in order of bit length */
-	register int w;				/* bits before this table == (l * h) */
-	unsigned x[BMAX + 1];		/* bit offsets, then code stack */
-	unsigned *xp;				/* pointer into x */
-	int y;						/* number of dummy codes added */
-	unsigned z;					/* number of entries in current table */
-
+	struct huft r;		/* table entry for structure assignment */
+	struct huft *u[BMAX];	/* table stack */
+	unsigned v[N_MAX];	/* values in order of bit length */
+	register int w;		/* bits before this table == (l * h) */
+	unsigned x[BMAX + 1];	/* bit offsets, then code stack */
+	unsigned *xp;		/* pointer into x */
+	int y;			/* number of dummy codes added */
+	unsigned z;		/* number of entries in current table */
 
 	/* Generate counts for each bit length */
-	memzero(c, sizeof(c));
+	memset ((void *)(c), 0, sizeof(c));
 	p = b;
 	i = n;
 	do {
-		Tracecv(*p,
-				(stderr,
-				 (n - i >= ' '
-				  && n - i <= '~' ? "%c %d\n" : "0x%x %d\n"), n - i, *p));
-		c[*p]++;				/* assume all entries <= BMAX */
-		p++;					/* Can't combine with above line (Solaris bug) */
+		Tracecv(*p,(stderr, (n - i >= ' ' && n - i <= '~' ? "%c %d\n" : "0x%x %d\n"), n - i, *p));
+		c[*p]++;	/* assume all entries <= BMAX */
+		p++;		/* Can't combine with above line (Solaris bug) */
 	} while (--i);
-	if (c[0] == n) {			/* null input--all zero length codes */
+	if (c[0] == n) {	/* null input--all zero length codes */
 		*t = (struct huft *) NULL;
 		*m = 0;
 		return 0;
 	}
 
-
 	/* Find minimum and maximum length, bound *m by those */
 	l = *m;
 	for (j = 1; j <= BMAX; j++)
 		if (c[j])
 			break;
-	k = j;						/* minimum code length */
+	k = j;				/* minimum code length */
 	if ((unsigned) l < j)
 		l = j;
 	for (i = BMAX; i; i--)
 		if (c[i])
 			break;
-	g = i;						/* maximum code length */
+	g = i;				/* maximum code length */
 	if ((unsigned) l > i)
 		l = i;
 	*m = l;
 
-
 	/* Adjust last length count to fill out codes, if needed */
 	for (y = 1 << j; j < i; j++, y <<= 1)
 		if ((y -= c[j]) < 0)
-			return 2;			/* bad input: more codes than bits */
+			return 2;	/* bad input: more codes than bits */
 	if ((y -= c[i]) < 0)
 		return 2;
 	c[i] += y;
 
-
 	/* Generate starting offsets into the value table for each length */
 	x[1] = j = 0;
 	p = c + 1;
 	xp = x + 2;
-	while (--i) {				/* note that i == g from above */
+	while (--i) {			/* note that i == g from above */
 		*xp++ = (j += *p++);
 	}
 
-
 	/* Make a table of values in order of bit lengths */
 	p = b;
 	i = 0;
@@ -1617,15 +612,14 @@ int *m;							/* maximum lookup bits, returns actual */
 			v[x[j]++] = i;
 	} while (++i < n);
 
-
 	/* Generate the Huffman codes and for each, make the table entries */
-	x[0] = i = 0;				/* first Huffman code is zero */
-	p = v;						/* grab values in bit order */
-	h = -1;						/* no tables yet--level -1 */
-	w = -l;						/* bits decoded == (l * h) */
+	x[0] = i = 0;			/* first Huffman code is zero */
+	p = v;				/* grab values in bit order */
+	h = -1;				/* no tables yet--level -1 */
+	w = -l;				/* bits decoded == (l * h) */
 	u[0] = (struct huft *) NULL;	/* just to keep compilers happy */
 	q = (struct huft *) NULL;	/* ditto */
-	z = 0;						/* ditto */
+	z = 0;				/* ditto */
 
 	/* go through the bit lengths (k already is bits in shortest code) */
 	for (; k <= g; k++) {
@@ -1635,7 +629,7 @@ int *m;							/* maximum lookup bits, returns actual */
 			/* make tables up to required level */
 			while (k > w + l) {
 				h++;
-				w += l;			/* previous table always l bits */
+				w += l;		/* previous table always l bits */
 
 				/* compute minimum size table less than or equal to l bits */
 				z = (z = g - w) > (unsigned) l ? l : z;	/* upper limit on table size */
@@ -1706,35 +700,11 @@ int *m;							/* maximum lookup bits, returns actual */
 			}
 		}
 	}
-
-
 	/* Return true (1) if we were given an incomplete table */
 	return y != 0 && g != 1;
 }
 
 
-
-int huft_free(t)
-struct huft *t;					/* table to free */
-
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-	register struct huft *p, *q;
-
-
-	/* Go through linked list, freeing from the malloced (t[-1]) address. */
-	p = t;
-	while (p != (struct huft *) NULL) {
-		q = (--p)->v.t;
-		free((char *) p);
-		p = q;
-	}
-	return 0;
-}
-
-
 int inflate_codes(tl, td, bl, bd)
 struct huft *tl, *td;			/* literal/length and distance decoder tables */
 int bl, bd;						/* number of bits decoded by tl[] and td[] */
@@ -1744,22 +714,21 @@ int bl, bd;						/* number of bits decoded by tl[] and td[] */
 {
 	register unsigned e;		/* table entry flag/number of extra bits */
 	unsigned n, d;				/* length and index for copy */
-	unsigned w;					/* current window position */
+	unsigned w;				/* current window position */
 	struct huft *t;				/* pointer to table entry */
 	unsigned ml, md;			/* masks for bl and bd bits */
 	register ulg b;				/* bit buffer */
 	register unsigned k;		/* number of bits in bit buffer */
 
-
 	/* make local copies of globals */
-	b = bb;						/* initialize bit buffer */
+	b = bb;					/* initialize bit buffer */
 	k = bk;
-	w = wp;						/* initialize window position */
+	w = outcnt;				/* initialize window position */
 
 	/* inflate the coded data */
 	ml = mask_bits[bl];			/* precompute masks for speed */
 	md = mask_bits[bd];
-	for (;;) {					/* do until end of block */
+	for (;;) {				/* do until end of block */
 		NEEDBITS((unsigned) bl)
 			if ((e = (t = tl + ((unsigned) b & ml))->e) > 16)
 			do {
@@ -1772,10 +741,12 @@ int bl, bd;						/* number of bits decoded by tl[] and td[] */
 					 > 16);
 		DUMPBITS(t->b)
 			if (e == 16) {		/* then it's a literal */
-			slide[w++] = (uch) t->v.n;
-			Tracevv((stderr, "%c", slide[w - 1]));
+			window[w++] = (uch) t->v.n;
+			Tracevv((stderr, "%c", window[w - 1]));
 			if (w == WSIZE) {
-				flush_output(w);
+//				flush_output(w);
+				outcnt=(w),
+				flush_window();
 				w = 0;
 			}
 		} else {				/* it's an EOB or a length */
@@ -1818,86 +789,34 @@ int bl, bd;						/* number of bits decoded by tl[] and td[] */
 					  n ? n : e);
 #if !defined(NOMEMCPY) && !defined(DEBUG)
 				if (w - d >= e) {	/* (this test assumes unsigned comparison) */
-					memcpy(slide + w, slide + d, e);
+					memcpy(window + w, window + d, e);
 					w += e;
 					d += e;
 				} else			/* do it slow to avoid memcpy() overlap */
 #endif							/* !NOMEMCPY */
 					do {
-						slide[w++] = slide[d++];
-						Tracevv((stderr, "%c", slide[w - 1]));
+						window[w++] = window[d++];
+						Tracevv((stderr, "%c", window[w - 1]));
 					} while (--e);
 				if (w == WSIZE) {
-					flush_output(w);
+//					flush_output(w);
+				outcnt=(w),
+				flush_window();
 					w = 0;
 				}
 			} while (n);
 		}
 	}
 
-
 	/* restore the globals from the locals */
-	wp = w;						/* restore global window pointer */
-	bb = b;						/* restore global bit buffer */
+	outcnt = w;			/* restore global window pointer */
+	bb = b;				/* restore global bit buffer */
 	bk = k;
 
 	/* done */
 	return 0;
 }
 
-
-
-int inflate_stored()
-/* "decompress" an inflated type 0 (stored) block. */
-{
-	unsigned n;					/* number of bytes in block */
-	unsigned w;					/* current window position */
-	register ulg b;				/* bit buffer */
-	register unsigned k;		/* number of bits in bit buffer */
-
-
-	/* make local copies of globals */
-	b = bb;						/* initialize bit buffer */
-	k = bk;
-	w = wp;						/* initialize window position */
-
-
-	/* go to byte boundary */
-	n = k & 7;
-	DUMPBITS(n);
-
-
-	/* get the length and its complement */
-	NEEDBITS(16)
-		n = ((unsigned) b & 0xffff);
-	DUMPBITS(16)
-		NEEDBITS(16)
-		if (n != (unsigned) ((~b) & 0xffff))
-		return 1;				/* error in compressed data */
-	DUMPBITS(16)
-
-
-		/* read and output the compressed data */
-		while (n--) {
-		NEEDBITS(8)
-			slide[w++] = (uch) b;
-		if (w == WSIZE) {
-			flush_output(w);
-			w = 0;
-		}
-		DUMPBITS(8)
-	}
-
-
-	/* restore the globals from the locals */
-	wp = w;						/* restore global window pointer */
-	bb = b;						/* restore global bit buffer */
-	bk = k;
-	return 0;
-}
-
-
-
 int inflate_fixed()
 /* decompress an inflated type 1 (fixed Huffman codes) block.  We should
    either replace this with a custom decoder, or at least precompute the
@@ -1910,7 +829,6 @@ int inflate_fixed()
 	int bd;						/* lookup bits for td */
 	unsigned l[288];			/* length list for huft_build */
 
-
 	/* set up literal table */
 	for (i = 0; i < 144; i++)
 		l[i] = 8;
@@ -1924,7 +842,6 @@ int inflate_fixed()
 	if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0)
 		return i;
 
-
 	/* set up distance table */
 	for (i = 0; i < 30; i++)	/* make an incomplete code set */
 		l[i] = 5;
@@ -1934,23 +851,22 @@ int inflate_fixed()
 		return i;
 	}
 
-
 	/* decompress until an end-of-block code */
 	if (inflate_codes(tl, td, bl, bd))
 		return 1;
 
-
 	/* free the decoding tables, return */
 	huft_free(tl);
 	huft_free(td);
 	return 0;
 }
 
-
-
 int inflate_dynamic()
 /* decompress an inflated type 2 (dynamic Huffman codes) block. */
 {
+	int dbits = 6;					/* bits in base distance lookup table */
+	int lbits = 9;					/* bits in base literal/length lookup table */
+
 	int i;						/* temporary variables */
 	unsigned j;
 	unsigned l;					/* last length */
@@ -1972,12 +888,10 @@ int inflate_dynamic()
 	register ulg b;				/* bit buffer */
 	register unsigned k;		/* number of bits in bit buffer */
 
-
 	/* make local bit buffer */
 	b = bb;
 	k = bk;
 
-
 	/* read in table lengths */
 	NEEDBITS(5)
 		nl = 257 + ((unsigned) b & 0x1f);	/* number of literal/length codes */
@@ -1995,7 +909,6 @@ int inflate_dynamic()
 #endif
 		return 1;				/* bad lengths */
 
-
 	/* read in bit-length-code lengths */
 	for (j = 0; j < nb; j++) {
 		NEEDBITS(3)
@@ -2005,16 +918,14 @@ int inflate_dynamic()
 	for (; j < 19; j++)
 		ll[border[j]] = 0;
 
-
 	/* build decoding table for trees--single level, 7 bit lookup */
 	bl = 7;
 	if ((i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl)) != 0) {
 		if (i == 1)
 			huft_free(tl);
-		return i;				/* incomplete code set */
+		return i;			/* incomplete code set */
 	}
 
-
 	/* read in literal and distance code lengths */
 	n = nl + nd;
 	m = mask_bits[bl];
@@ -2024,7 +935,7 @@ int inflate_dynamic()
 			j = (td = tl + ((unsigned) b & m))->b;
 		DUMPBITS(j)
 			j = td->v.n;
-		if (j < 16)				/* length of code in bits (0..15) */
+		if (j < 16)			/* length of code in bits (0..15) */
 			ll[i++] = l = j;	/* save last length in l */
 		else if (j == 16) {		/* repeat last length 3 to 6 times */
 			NEEDBITS(2)
@@ -2043,7 +954,7 @@ int inflate_dynamic()
 			while (j--)
 				ll[i++] = 0;
 			l = 0;
-		} else {				/* j == 18: 11 to 138 zero length codes */
+		} else {		/* j == 18: 11 to 138 zero length codes */
 
 			NEEDBITS(7)
 				j = 11 + ((unsigned) b & 0x7f);
@@ -2056,16 +967,13 @@ int inflate_dynamic()
 		}
 	}
 
-
 	/* free decoding table for trees */
 	huft_free(tl);
 
-
 	/* restore the global bit buffer */
 	bb = b;
 	bk = k;
 
-
 	/* build the decoding tables for literal/length and distance codes */
 	bl = lbits;
 	if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) {
@@ -2073,69 +981,54 @@ int inflate_dynamic()
 			fprintf(stderr, " incomplete literal tree\n");
 			huft_free(tl);
 		}
-		return i;				/* incomplete code set */
+		return i;			/* incomplete code set */
 	}
 	bd = dbits;
 	if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) {
 		if (i == 1) {
 			fprintf(stderr, " incomplete distance tree\n");
-#ifdef PKZIP_BUG_WORKAROUND
-			i = 0;
-		}
-#else
 			huft_free(td);
 		}
 		huft_free(tl);
-		return i;				/* incomplete code set */
-#endif
+		return i;			/* incomplete code set */
 	}
 
-
 	/* decompress until an end-of-block code */
 	if (inflate_codes(tl, td, bl, bd))
 		return 1;
 
-
 	/* free the decoding tables, return */
 	huft_free(tl);
 	huft_free(td);
 	return 0;
 }
 
-
-
-int inflate_block(e)
-int *e;							/* last block flag */
-
 /* decompress an inflated block */
+int inflate_block(e)
+int *e;					/* last block flag */
 {
-	unsigned t;					/* block type */
-	register ulg b;				/* bit buffer */
+	unsigned t;			/* block type */
+	register ulg b;			/* bit buffer */
 	register unsigned k;		/* number of bits in bit buffer */
 
-
 	/* make local bit buffer */
 	b = bb;
 	k = bk;
 
-
 	/* read in last block bit */
 	NEEDBITS(1)
 		* e = (int) b & 1;
 	DUMPBITS(1)
 
-
 		/* read in block type */
 		NEEDBITS(2)
 		t = (unsigned) b & 3;
 	DUMPBITS(2)
 
-
 		/* restore the global bit buffer */
 		bb = b;
 	bk = k;
 
-
 	/* inflate that block type */
 	if (t == 2)
 		return inflate_dynamic();
@@ -2144,27 +1037,22 @@ int *e;							/* last block flag */
 	if (t == 1)
 		return inflate_fixed();
 
-
 	/* bad block type */
 	return 2;
 }
 
-
-
 int inflate()
 /* decompress an inflated entry */
 {
-	int e;						/* last block flag */
-	int r;						/* result code */
-	unsigned h;					/* maximum struct huft's malloc'ed */
-
+	int e;				/* last block flag */
+	int r;				/* result code */
+	unsigned h;			/* maximum struct huft's malloc'ed */
 
 	/* initialize window, bit buffer */
-	wp = 0;
+	outcnt = 0;
 	bk = 0;
 	bb = 0;
 
-
 	/* decompress until the last block */
 	h = 0;
 	do {
@@ -2183,13 +1071,306 @@ int inflate()
 		inptr--;
 	}
 
-	/* flush out slide */
-	flush_output(wp);
-
-
+	/* flush out window */
+	outcnt=(outcnt),
+	flush_window();
 	/* return success */
 #ifdef DEBUG
 	fprintf(stderr, "<%u> ", h);
 #endif							/* DEBUG */
 	return 0;
 }
+
+/* ===========================================================================
+ * Unzip in to out.  This routine works on both gzip and pkzip files.
+ *
+ * IN assertions: the buffer inbuf contains already the beginning of
+ *   the compressed data, from offsets inptr to insize-1 included.
+ *   The magic header has already been checked. The output buffer is cleared.
+ */
+int unzip(in, out)
+int in, out;					/* input and output file descriptors */
+{
+	int ext_header = 0;				/* set if extended local header */
+	int pkzip = 0;					/* set for a pkzip file */
+	ulg orig_crc = 0;			/* original crc */
+	ulg orig_len = 0;			/* original uncompressed length */
+	int n;
+	uch buf[EXTHDR];			/* extended local header */
+
+	ifd = in;
+	ofd = out;
+	method = get_method(ifd);
+	if (method < 0) {
+		exit(exit_code);		/* error message already emitted */
+	}
+
+	updcrc(NULL, 0);			/* initialize crc */
+
+	if (pkzip && !ext_header) {	/* crc and length at the end otherwise */
+		orig_crc = LG(inbuf + LOCCRC);
+		orig_len = LG(inbuf + LOCLEN);
+	}
+
+	/* Decompress */
+	if (method == DEFLATED) {
+
+		int res = inflate();
+
+		if (res == 3) {
+			errorMsg(memory_exhausted);
+		} else if (res != 0) {
+			errorMsg("invalid compressed data--format violated");
+		}
+
+	} else {
+		errorMsg("internal error, invalid method");
+	}
+
+	/* Get the crc and original length */
+	if (!pkzip) {
+		/* crc32  (see algorithm.doc)
+		   * uncompressed input size modulo 2^32
+		 */
+		for (n = 0; n < 8; n++) {
+			buf[n] = (uch) get_byte();	/* may cause an error if EOF */
+		}
+		orig_crc = LG(buf);
+		orig_len = LG(buf + 4);
+
+	} else if (ext_header) {	/* If extended header, check it */
+		/* signature - 4bytes: 0x50 0x4b 0x07 0x08
+		 * CRC-32 value
+		 * compressed size 4-bytes
+		 * uncompressed size 4-bytes
+		 */
+		for (n = 0; n < EXTHDR; n++) {
+			buf[n] = (uch) get_byte();	/* may cause an error if EOF */
+		}
+		orig_crc = LG(buf + 4);
+		orig_len = LG(buf + 12);
+	}
+
+	/* Validate decompression */
+	if (orig_crc != updcrc(outbuf, 0)) {
+		errorMsg("invalid compressed data--crc error");
+	}
+	if (orig_len != (ulg) bytes_out) {
+		errorMsg("invalid compressed data--length error");
+	}
+
+	/* Check if there are more entries in a pkzip file */
+	if (pkzip && inptr + 4 < insize && LG(inbuf + inptr) == LOCSIG) {
+		fprintf(stderr, "has more than one entry--rest ignored\n");
+		if (exit_code == OK)
+			exit_code = WARNING;
+	}
+	ext_header = pkzip = 0;		/* for next file */
+	return OK;
+}
+
+
+/* ===========================================================================
+ * Clear input and output buffers
+ */
+void clear_bufs(void)
+{
+	outcnt = 0;
+	insize = inptr = 0;
+	bytes_in = bytes_out = 0L;
+}
+
+/* ===========================================================================
+ * Write the output buffer outbuf[0..outcnt-1] and update bytes_out.
+ * (used for the compressed data only)
+ */
+void flush_outbuf()
+{
+	if (outcnt == 0)
+		return;
+
+	if (!test_mode)
+		write_buf(ofd, (char *) outbuf, outcnt);
+	bytes_out += (ulg) outcnt;
+	outcnt = 0;
+}
+
+/* ======================================================================== */
+int gunzip_main(int argc, char **argv)
+{
+	int file_count;				/* number of files to precess */
+	int tostdout = 0;
+	int fromstdin = 0;
+	int result;
+	int inFileNum;
+	int outFileNum;
+	int delInputFile = 0;
+	int force = 0;
+	struct stat statBuf;
+	char *delFileName;
+	char ifname[MAX_PATH_LEN + 1];	/* input file name */
+	char ofname[MAX_PATH_LEN + 1];	/* output file name */
+
+	if (strcmp(applet_name, "zcat") == 0) {
+		force = 1;
+		tostdout = 1;
+	}
+
+	/* Parse any options */
+	while (--argc > 0 && **(++argv) == '-') {
+		if (*((*argv) + 1) == '\0') {
+			tostdout = 1;
+		}
+		while (*(++(*argv))) {
+			switch (**argv) {
+			case 'c':
+				tostdout = 1;
+				break;
+			case 't':
+				test_mode = 1;
+				break;
+			case 'f':
+				force = 1;
+				break;
+			default:
+				usage(gunzip_usage);
+			}
+		}
+	}
+
+	if (argc <= 0) {
+		tostdout = 1;
+		fromstdin = 1;
+	}
+
+	if (isatty(fileno(stdin)) && fromstdin==1 && force==0)
+		fatalError( "data not read from terminal. Use -f to force it.\n");
+	if (isatty(fileno(stdout)) && tostdout==1 && force==0)
+		fatalError( "data not written to terminal. Use -f to force it.\n");
+
+
+	foreground = signal(SIGINT, SIG_IGN) != SIG_IGN;
+	if (foreground) {
+		(void) signal(SIGINT, (sig_type) abort_gzip);
+	}
+#ifdef SIGTERM
+	if (signal(SIGTERM, SIG_IGN) != SIG_IGN) {
+		(void) signal(SIGTERM, (sig_type) abort_gzip);
+	}
+#endif
+#ifdef SIGHUP
+	if (signal(SIGHUP, SIG_IGN) != SIG_IGN) {
+		(void) signal(SIGHUP, (sig_type) abort_gzip);
+	}
+#endif
+
+	file_count = argc - optind;
+
+	/* Allocate all global buffers (for DYN_ALLOC option) */
+	inbuf = xmalloc((size_t)((INBUFSIZ+INBUF_EXTRA+1L)*sizeof(uch)));
+	outbuf = xmalloc((size_t)((OUTBUFSIZ+OUTBUF_EXTRA+1L)*sizeof(uch)));
+	d_buf = xmalloc((size_t)((DIST_BUFSIZE+1L)*sizeof(ush)));
+	window = xmalloc((size_t)(((2L*WSIZE)+1L)*sizeof(uch)));
+	tab_prefix0 = xmalloc((size_t)(((1L<<(BITS-1))+1L)*sizeof(ush)));	
+	tab_prefix1 = xmalloc((size_t)(((1L<<(BITS-1))+1L)*sizeof(ush)));	
+
+	if (fromstdin == 1) {
+		strcpy(ofname, "stdin");
+
+		inFileNum = fileno(stdin);
+		ifile_size = -1L;		/* convention for unknown size */
+	} else {
+		/* Open up the input file */
+		if (argc <= 0)
+			usage(gunzip_usage);
+		if (strlen(*argv) > MAX_PATH_LEN) {
+			errorMsg(name_too_long);
+			exit(WARNING);
+		}
+		strcpy(ifname, *argv);
+
+		/* Open input fille */
+		inFileNum = open(ifname, O_RDONLY);
+		if (inFileNum < 0) {
+			perror(ifname);
+			exit(WARNING);
+		}
+		/* Get the time stamp on the input file. */
+		result = stat(ifname, &statBuf);
+		if (result < 0) {
+			perror(ifname);
+			exit(WARNING);
+		}
+		ifile_size = statBuf.st_size;
+	}
+
+	if (tostdout == 1) {
+		/* And get to work */
+		strcpy(ofname, "stdout");
+		outFileNum = fileno(stdout);
+
+		clear_bufs();			/* clear input and output buffers */
+		part_nb = 0;
+
+		/* Actually do the compression/decompression. */
+		unzip(inFileNum, outFileNum);
+
+	} else if (test_mode) {
+		/* Actually do the compression/decompression. */
+		unzip(inFileNum, 2);
+	} else {
+		char *pos;
+
+		/* And get to work */
+		if (strlen(ifname) > MAX_PATH_LEN - 4) {
+			errorMsg(name_too_long);
+			exit(WARNING);
+		}
+		strcpy(ofname, ifname);
+		pos = strstr(ofname, ".gz");
+		if (pos != NULL) {
+			*pos = '\0';
+			delInputFile = 1;
+		} else {
+			pos = strstr(ofname, ".tgz");
+			if (pos != NULL) {
+				*pos = '\0';
+				strcat(pos, ".tar");
+				delInputFile = 1;
+			}
+		}
+
+		/* Open output fille */
+#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
+		outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL | O_NOFOLLOW);
+#else
+		outFileNum = open(ofname, O_RDWR | O_CREAT | O_EXCL);
+#endif
+		if (outFileNum < 0) {
+			perror(ofname);
+			exit(WARNING);
+		}
+		/* Set permissions on the file */
+		fchmod(outFileNum, statBuf.st_mode);
+
+		clear_bufs();			/* clear input and output buffers */
+		part_nb = 0;
+
+		/* Actually do the compression/decompression. */
+		result = unzip(inFileNum, outFileNum);
+
+		close(outFileNum);
+		close(inFileNum);
+		/* Delete the original file */
+		if (result == OK)
+			delFileName = ifname;
+		else
+			delFileName = ofname;
+
+		if (delInputFile == 1 && unlink(delFileName) < 0) {
+			perror(delFileName);
+			exit(FALSE);
+		}
+	}
+	return(exit_code);
+}