rename uncompress.c to decompress_uncompress.c

rename unzip.c to decompress_unzip.c

3 files changed, 4 insertions, 1279 deletions

diff --git a/archival/libunarchive/Makefile.in b/archival/libunarchive/Makefile.in
index c0e12a6..5cf5efa 100644
--- a/archival/libunarchive/Makefile.in
+++ b/archival/libunarchive/Makefile.in
@@ -48,7 +48,7 @@ LIBUNARCHIVE-y:= \
 	open_transformer.o \
 	init_handle.o
 
-GUNZIP_FILES:= check_header_gzip.o unzip.o
+GUNZIP_FILES:= check_header_gzip.o decompress_unzip.o
 DPKG_FILES:= \
 	get_header_ar.o \
 	unpack_ar_archive.o \
@@ -63,14 +63,14 @@ LIBUNARCHIVE-$(CONFIG_DPKG_DEB) += $(DPKG_FILES)
 LIBUNARCHIVE-$(CONFIG_FEATURE_DEB_TAR_GZ) += $(GUNZIP_FILES) get_header_tar_gz.o
 LIBUNARCHIVE-$(CONFIG_FEATURE_DEB_TAR_BZ2) += decompress_bunzip2.o get_header_tar_bz2.o
 LIBUNARCHIVE-$(CONFIG_GUNZIP) += $(GUNZIP_FILES)
-LIBUNARCHIVE-$(CONFIG_FEATURE_GUNZIP_UNCOMPRESS) += uncompress.o
+LIBUNARCHIVE-$(CONFIG_FEATURE_GUNZIP_UNCOMPRESS) += decompress_uncompress.o
 LIBUNARCHIVE-$(CONFIG_RPM2CPIO) += $(GUNZIP_FILES) get_header_cpio.o
 LIBUNARCHIVE-$(CONFIG_RPM) += $(GUNZIP_FILES) get_header_cpio.o
 LIBUNARCHIVE-$(CONFIG_TAR) += get_header_tar.o
 LIBUNARCHIVE-$(CONFIG_FEATURE_TAR_BZIP2) += decompress_bunzip2.o get_header_tar_bz2.o
 LIBUNARCHIVE-$(CONFIG_FEATURE_TAR_GZIP) += $(GUNZIP_FILES) get_header_tar_gz.o
-LIBUNARCHIVE-$(CONFIG_FEATURE_TAR_COMPRESS) += uncompress.o
-LIBUNARCHIVE-$(CONFIG_UNCOMPRESS) += uncompress.o
+LIBUNARCHIVE-$(CONFIG_FEATURE_TAR_COMPRESS) += decompress_uncompress.o
+LIBUNARCHIVE-$(CONFIG_UNCOMPRESS) += decompress_uncompress.o
 LIBUNARCHIVE-$(CONFIG_UNZIP) += $(GUNZIP_FILES)
 
 libraries-y+=$(LIBUNARCHIVE_DIR)$(LIBUNARCHIVE_AR)
diff --git a/archival/libunarchive/uncompress.c b/archival/libunarchive/uncompress.c
deleted file mode 100644
index ddf293f..0000000
--- a/archival/libunarchive/uncompress.c
+++ /dev/null
@@ -1,293 +0,0 @@
-#include "config.h"
-#include "libbb.h"
-
-/* uncompress for busybox -- (c) 2002 Robert Griebl
- *
- * based on the original compress42.c source
- * (see disclaimer below)
- */
-
-
-/* (N)compress42.c - File compression ala IEEE Computer, Mar 1992.
- *
- * Authors:
- *   Spencer W. Thomas   (decvax!harpo!utah-cs!utah-gr!thomas)
- *   Jim McKie           (decvax!mcvax!jim)
- *   Steve Davies        (decvax!vax135!petsd!peora!srd)
- *   Ken Turkowski       (decvax!decwrl!turtlevax!ken)
- *   James A. Woods      (decvax!ihnp4!ames!jaw)
- *   Joe Orost           (decvax!vax135!petsd!joe)
- *   Dave Mack           (csu@alembic.acs.com)
- *   Peter Jannesen, Network Communication Systems
- *                       (peter@ncs.nl)
- *
- * marc@suse.de : a small security fix for a buffer overflow
- *
- * [... History snipped ...]
- *
- */
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-/* Defailt input buffer size */
-#define	IBUFSIZ	2048
-
-/* Default output buffer size */
-#define	OBUFSIZ	2048
-
-/* Defines for third byte of header */
-#define	MAGIC_1		(char_type)'\037'	/* First byte of compressed file               */
-#define	MAGIC_2		(char_type)'\235'	/* Second byte of compressed file              */
-#define BIT_MASK	0x1f	/* Mask for 'number of compresssion bits'       */
-							/* Masks 0x20 and 0x40 are free.                */
-							/* I think 0x20 should mean that there is       */
-							/* a fourth header byte (for expansion).        */
-#define BLOCK_MODE	0x80	/* Block compresssion if table is full and      */
-			/* compression rate is dropping flush tables    */
-			/* the next two codes should not be changed lightly, as they must not   */
-			/* lie within the contiguous general code space.                        */
-#define FIRST	257		/* first free entry                             */
-#define	CLEAR	256		/* table clear output code                      */
-
-#define INIT_BITS 9		/* initial number of bits/code */
-
-
-/* machine variants which require cc -Dmachine:  pdp11, z8000, DOS */
-#define FAST
-
-#define	HBITS		17	/* 50% occupancy */
-#define	HSIZE	   (1<<HBITS)
-#define	HMASK	   (HSIZE-1)
-#define	HPRIME		 9941
-#define	BITS		   16
-#undef	MAXSEG_64K
-#define MAXCODE(n)	(1L << (n))
-
-/* Block compress mode -C compatible with 2.0 */
-int block_mode = BLOCK_MODE;
-
-/* user settable max # bits/code */
-int maxbits = BITS;
-
-/* Exitcode of compress (-1 no file compressed) */
-int exit_code = -1;
-
-/* Input buffer */
-unsigned char inbuf[IBUFSIZ + 64];
-
-/* Output buffer */
-unsigned char outbuf[OBUFSIZ + 2048];
-
-
-long int htab[HSIZE];
-unsigned short codetab[HSIZE];
-
-#define	htabof(i)				htab[i]
-#define	codetabof(i)			codetab[i]
-#define	tab_prefixof(i)			codetabof(i)
-#define	tab_suffixof(i)			((unsigned char *)(htab))[i]
-#define	de_stack				((unsigned char *)&(htab[HSIZE-1]))
-#define	clear_htab()			memset(htab, -1, sizeof(htab))
-#define	clear_tab_prefixof()	memset(codetab, 0, 256);
-
-
-/*
- * Decompress stdin to stdout.  This routine adapts to the codes in the
- * file building the "string" table on-the-fly; requiring no table to
- * be stored in the compressed file.  The tables used herein are shared
- * with those of the compress() routine.  See the definitions above.
- */
-
-extern int uncompress(int fd_in, int fd_out)
-{
-	unsigned char *stackp;
-	long int code;
-	int finchar;
-	long int oldcode;
-	long int incode;
-	int inbits;
-	int posbits;
-	int outpos;
-	int insize;
-	int bitmask;
-	long int free_ent;
-	long int maxcode;
-	long int maxmaxcode;
-	int n_bits;
-	int rsize = 0;
-
-	insize = 0;
-
-	inbuf[0] = bb_xread_char(fd_in);
-
-	maxbits = inbuf[0] & BIT_MASK;
-	block_mode = inbuf[0] & BLOCK_MODE;
-	maxmaxcode = MAXCODE(maxbits);
-
-	if (maxbits > BITS) {
-		bb_error_msg("compressed with %d bits, can only handle %d bits", maxbits,
-				  BITS);
-		return -1;
-	}
-
-	maxcode = MAXCODE(n_bits = INIT_BITS) - 1;
-	bitmask = (1 << n_bits) - 1;
-	oldcode = -1;
-	finchar = 0;
-	outpos = 0;
-	posbits = 0 << 3;
-
-	free_ent = ((block_mode) ? FIRST : 256);
-
-	/* As above, initialize the first 256 entries in the table. */
-	clear_tab_prefixof();
-
-	for (code = 255; code >= 0; --code) {
-		tab_suffixof(code) = (unsigned char) code;
-	}
-
-	do {
-	  resetbuf:;
-		{
-			int i;
-			int e;
-			int o;
-
-			e = insize - (o = (posbits >> 3));
-
-			for (i = 0; i < e; ++i)
-				inbuf[i] = inbuf[i + o];
-
-			insize = e;
-			posbits = 0;
-		}
-
-		if (insize < (int) sizeof(inbuf) - IBUFSIZ) {
-			rsize = safe_read(fd_in, inbuf + insize, IBUFSIZ);
-			insize += rsize;
-		}
-
-		inbits = ((rsize > 0) ? (insize - insize % n_bits) << 3 :
-				  (insize << 3) - (n_bits - 1));
-
-		while (inbits > posbits) {
-			if (free_ent > maxcode) {
-				posbits =
-					((posbits - 1) +
-					 ((n_bits << 3) -
-					  (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
-				++n_bits;
-				if (n_bits == maxbits) {
-					maxcode = maxmaxcode;
-				} else {
-					maxcode = MAXCODE(n_bits) - 1;
-				}
-				bitmask = (1 << n_bits) - 1;
-				goto resetbuf;
-			}
-			{
-				unsigned char *p = &inbuf[posbits >> 3];
-
-				code =
-					((((long) (p[0])) | ((long) (p[1]) << 8) |
-					  ((long) (p[2]) << 16)) >> (posbits & 0x7)) & bitmask;
-			}
-			posbits += n_bits;
-
-
-			if (oldcode == -1) {
-				outbuf[outpos++] = (unsigned char) (finchar =
-												(int) (oldcode = code));
-				continue;
-			}
-
-			if (code == CLEAR && block_mode) {
-				clear_tab_prefixof();
-				free_ent = FIRST - 1;
-				posbits =
-					((posbits - 1) +
-					 ((n_bits << 3) -
-					  (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
-				maxcode = MAXCODE(n_bits = INIT_BITS) - 1;
-				bitmask = (1 << n_bits) - 1;
-				goto resetbuf;
-			}
-
-			incode = code;
-			stackp = de_stack;
-
-			/* Special case for KwKwK string. */
-			if (code >= free_ent) {
-				if (code > free_ent) {
-					unsigned char *p;
-
-					posbits -= n_bits;
-					p = &inbuf[posbits >> 3];
-
-					bb_error_msg
-						("insize:%d posbits:%d inbuf:%02X %02X %02X %02X %02X (%d)",
-						 insize, posbits, p[-1], p[0], p[1], p[2], p[3],
-						 (posbits & 07));
-					bb_error_msg("uncompress: corrupt input");
-					return -1;
-				}
-
-				*--stackp = (unsigned char) finchar;
-				code = oldcode;
-			}
-
-			/* Generate output characters in reverse order */
-			while ((long int) code >= (long int) 256) {
-				*--stackp = tab_suffixof(code);
-				code = tab_prefixof(code);
-			}
-
-			*--stackp = (unsigned char) (finchar = tab_suffixof(code));
-
-			/* And put them out in forward order */
-			{
-				int i;
-
-				if (outpos + (i = (de_stack - stackp)) >= OBUFSIZ) {
-					do {
-						if (i > OBUFSIZ - outpos) {
-							i = OBUFSIZ - outpos;
-						}
-
-						if (i > 0) {
-							memcpy(outbuf + outpos, stackp, i);
-							outpos += i;
-						}
-
-						if (outpos >= OBUFSIZ) {
-							write(fd_out, outbuf, outpos);
-							outpos = 0;
-						}
-						stackp += i;
-					} while ((i = (de_stack - stackp)) > 0);
-				} else {
-					memcpy(outbuf + outpos, stackp, i);
-					outpos += i;
-				}
-			}
-
-			/* Generate the new entry. */
-			if ((code = free_ent) < maxmaxcode) {
-				tab_prefixof(code) = (unsigned short) oldcode;
-				tab_suffixof(code) = (unsigned char) finchar;
-				free_ent = code + 1;
-			}
-
-			/* Remember previous code.  */
-			oldcode = incode;
-		}
-
-	} while (rsize > 0);
-
-	if (outpos > 0) {
-		write(fd_out, outbuf, outpos);
-	}
-
-	return 0;
-}
diff --git a/archival/libunarchive/unzip.c b/archival/libunarchive/unzip.c
deleted file mode 100644
index a436db1..0000000
--- a/archival/libunarchive/unzip.c
+++ /dev/null
@@ -1,982 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * gunzip implementation for busybox
- *
- * Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly.
- *
- * Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de>
- * based on gzip sources
- *
- * Adjusted further by Erik Andersen <andersen@codepoet.org> to support
- * files as well as stdin/stdout, and to generally behave itself wrt
- * command line handling.
- *
- * General cleanup to better adhere to the style guide and make use of standard
- * busybox functions by Glenn McGrath <bug1@optushome.com.au>
- *
- * read_gz interface + associated hacking by Laurence Anderson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
- * Copyright (C) 1992-1993 Jean-loup Gailly
- * The unzip code was written and put in the public domain by Mark Adler.
- * Portions of the lzw code are derived from the public domain 'compress'
- * written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
- * Ken Turkowski, Dave Mack and Peter Jannesen.
- *
- * See the license_msg below and the file COPYING for the software license.
- * See the file algorithm.doc for the compression algorithms and file formats.
- */
-
-#if 0
-static char *license_msg[] = {
-	"   Copyright (C) 1992-1993 Jean-loup Gailly",
-	"   This program is free software; you can redistribute it and/or modify",
-	"   it under the terms of the GNU General Public License as published by",
-	"   the Free Software Foundation; either version 2, or (at your option)",
-	"   any later version.",
-	"",
-	"   This program is distributed in the hope that it will be useful,",
-	"   but WITHOUT ANY WARRANTY; without even the implied warranty of",
-	"   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the",
-	"   GNU General Public License for more details.",
-	"",
-	"   You should have received a copy of the GNU General Public License",
-	"   along with this program; if not, write to the Free Software",
-	"   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.",
-	0
-};
-#endif
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include "config.h"
-#include "busybox.h"
-#include "unarchive.h"
-
-typedef struct huft_s {
-	unsigned char e;	/* number of extra bits or operation */
-	unsigned char b;	/* number of bits in this code or subcode */
-	union {
-		unsigned short n;	/* literal, length base, or distance base */
-		struct huft_s *t;	/* pointer to next level of table */
-	} v;
-} huft_t;
-
-static int gunzip_src_fd;
-unsigned int gunzip_bytes_out;	/* number of output bytes */
-static unsigned int gunzip_outbuf_count;	/* bytes in output buffer */
-
-/* gunzip_window size--must be a power of two, and
- *  at least 32K for zip's deflate method */
-static const int gunzip_wsize = 0x8000;
-static unsigned char *gunzip_window;
-
-static unsigned int *gunzip_crc_table;
-unsigned int gunzip_crc;
-
-/* If BMAX needs to be larger than 16, then h and x[] should be ulg. */
-#define BMAX 16	/* maximum bit length of any code (16 for explode) */
-#define N_MAX 288	/* maximum number of codes in any set */
-
-/* bitbuffer */
-static unsigned int gunzip_bb;	/* bit buffer */
-static unsigned char gunzip_bk;	/* bits in bit buffer */
-
-/* These control the size of the bytebuffer */
-static unsigned int bytebuffer_max = 0x8000;
-static unsigned char *bytebuffer = NULL;
-static unsigned int bytebuffer_offset = 0;
-static unsigned int bytebuffer_size = 0;
-
-static const unsigned short mask_bits[] = {
-	0x0000, 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-	0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* Copy lengths for literal codes 257..285 */
-static const unsigned short cplens[] = {
-	3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, 35, 43, 51, 59,
-		67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0
-};
-
-/* note: see note #13 above about the 258 in this list. */
-/* Extra bits for literal codes 257..285 */
-static const unsigned char cplext[] = {
-	0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 5,
-		5, 5, 5, 0, 99, 99
-};						/* 99==invalid */
-
-/* Copy offsets for distance codes 0..29 */
-static const unsigned short cpdist[] = {
-	1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513,
-		769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577
-};
-
-/* Extra bits for distance codes */
-static const unsigned char cpdext[] = {
-	0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10,
-		11, 11, 12, 12, 13, 13
-};
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-/* Order of the bit length code lengths */
-static const unsigned char border[] = {
-	16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15
-};
-
-static unsigned int fill_bitbuffer(unsigned int bitbuffer, unsigned int *current, const unsigned int required)
-{
-	while (*current < required) {
-		if (bytebuffer_offset >= bytebuffer_size) {
-			/* Leave the first 4 bytes empty so we can always unwind the bitbuffer
-			 * to the front of the bytebuffer, leave 4 bytes free at end of tail
-			 * so we can easily top up buffer in check_trailer_gzip() */
-			bytebuffer_size = 4 + bb_xread(gunzip_src_fd, &bytebuffer[4], bytebuffer_max - 8);
-			bytebuffer_offset = 4;
-		}
-		bitbuffer |= ((unsigned int) bytebuffer[bytebuffer_offset]) << *current;
-		bytebuffer_offset++;
-		*current += 8;
-	}
-	return(bitbuffer);
-}
-
-static void make_gunzip_crc_table(void)
-{
-	const unsigned int poly = 0xedb88320;	/* polynomial exclusive-or pattern */
-	unsigned short i;	/* counter for all possible eight bit values */
-
-	/* initial shift register value */
-	gunzip_crc = 0xffffffffL;
-	gunzip_crc_table = (unsigned int *) malloc(256 * sizeof(unsigned int));
-
-	/* Compute and print table of CRC's, five per line */
-	for (i = 0; i < 256; i++) {
-		unsigned int table_entry;	/* crc shift register */
-		unsigned char k;	/* byte being shifted into crc apparatus */
-
-		table_entry = i;
-		/* The idea to initialize the register with the byte instead of
-		   * zero was stolen from Haruhiko Okumura's ar002
-		 */
-		for (k = 8; k; k--) {
-			if (table_entry & 1) {
-				table_entry = (table_entry >> 1) ^ poly;
-			} else {
-				table_entry >>= 1;
-	}
-	}
-		gunzip_crc_table[i] = table_entry;
-	}
-}
-
-/*
- * Free the malloc'ed tables built by huft_build(), which makes a linked
- * list of the tables it made, with the links in a dummy first entry of
- * each table.
- * t: table to free
- */
-static int huft_free(huft_t * t)
-{
-	huft_t *p;
-	huft_t *q;
-
-	/* Go through linked list, freeing from the malloced (t[-1]) address. */
-	p = t;
-	while (p != (huft_t *) NULL) {
-		q = (--p)->v.t;
-		free((char *) p);
-		p = q;
-	}
-	return 0;
-}
-
-/* Given a list of code lengths and a maximum table size, make a set of
- * tables to decode that set of codes.  Return zero on success, one if
- * the given code set is incomplete (the tables are still built in this
- * case), two if the input is invalid (all zero length codes or an
- * oversubscribed set of lengths), and three if not enough memory.
- *
- * b:	code lengths in bits (all assumed <= BMAX)
- * n:	number of codes (assumed <= N_MAX)
- * s:	number of simple-valued codes (0..s-1)
- * d:	list of base values for non-simple codes
- * e:	list of extra bits for non-simple codes
- * t:	result: starting table
- * m:	maximum lookup bits, returns actual
- */
-static int huft_build(unsigned int *b, const unsigned int n,
-					  const unsigned int s, const unsigned short *d,
-					  const unsigned char *e, huft_t ** t, int *m)
-{
-	unsigned a;			/* counter for codes of length k */
-	unsigned c[BMAX + 1];	/* bit length count table */
-	unsigned f;			/* i repeats in table every f entries */
-	int g;				/* maximum code length */
-	int h;				/* table level */
-	register unsigned i;	/* counter, current code */
-	register unsigned j;	/* counter */
-	register int k;		/* number of bits in current code */
-	int l;				/* bits per table (returned in m) */
-	register unsigned *p;	/* pointer into c[], b[], or v[] */
-	register huft_t *q;	/* points to current table */
-	huft_t r;			/* table entry for structure assignment */
-	huft_t *u[BMAX];	/* table stack */
-	unsigned v[N_MAX];	/* values in order of bit length */
-	register int w;		/* bits before this table == (l * h) */
-	unsigned x[BMAX + 1];	/* bit offsets, then code stack */
-	unsigned *xp;		/* pointer into x */
-	int y;				/* number of dummy codes added */
-	unsigned z;			/* number of entries in current table */
-
-	/* Generate counts for each bit length */
-	memset((void *) (c), 0, sizeof(c));
-	p = b;
-	i = n;
-	do {
-		c[*p]++;		/* assume all entries <= BMAX */
-		p++;			/* Can't combine with above line (Solaris bug) */
-	} while (--i);
-	if (c[0] == n) {	/* null input--all zero length codes */
-		*t = (huft_t *) NULL;
-		*m = 0;
-		return 0;
-	}
-
-	/* Find minimum and maximum length, bound *m by those */
-	l = *m;
-	for (j = 1; j <= BMAX; j++) {
-		if (c[j]) {
-			break;
-		}
-	}
-	k = j;				/* minimum code length */
-	if ((unsigned) l < j) {
-		l = j;
-	}
-	for (i = BMAX; i; i--) {
-		if (c[i]) {
-			break;
-		}
-	}
-	g = i;				/* maximum code length */
-	if ((unsigned) l > i) {
-		l = i;
-	}
-	*m = l;
-
-	/* Adjust last length count to fill out codes, if needed */
-	for (y = 1 << j; j < i; j++, y <<= 1) {
-		if ((y -= c[j]) < 0) {
-			return 2;	/* bad input: more codes than bits */
-		}
-	}
-	if ((y -= c[i]) < 0) {
-		return 2;
-	}
-	c[i] += y;
-
-	/* Generate starting offsets into the value table for each length */
-	x[1] = j = 0;
-	p = c + 1;
-	xp = x + 2;
-	while (--i) {		/* note that i == g from above */
-		*xp++ = (j += *p++);
-	}
-
-	/* Make a table of values in order of bit lengths */
-	p = b;
-	i = 0;
-	do {
-		if ((j = *p++) != 0) {
-			v[x[j]++] = i;
-		}
-	} while (++i < n);
-
-	/* Generate the Huffman codes and for each, make the table entries */
-	x[0] = i = 0;		/* first Huffman code is zero */
-	p = v;				/* grab values in bit order */
-	h = -1;				/* no tables yet--level -1 */
-	w = -l;				/* bits decoded == (l * h) */
-	u[0] = (huft_t *) NULL;	/* just to keep compilers happy */
-	q = (huft_t *) NULL;	/* ditto */
-	z = 0;				/* ditto */
-
-	/* go through the bit lengths (k already is bits in shortest code) */
-	for (; k <= g; k++) {
-		a = c[k];
-		while (a--) {
-			/* here i is the Huffman code of length k bits for value *p */
-			/* make tables up to required level */
-			while (k > w + l) {
-				h++;
-				w += l;	/* previous table always l bits */
-
-				/* compute minimum size table less than or equal to l bits */
-				z = (z = g - w) > (unsigned) l ? l : z;	/* upper limit on table size */
-				if ((f = 1 << (j = k - w)) > a + 1) {	/* try a k-w bit table *//* too few codes for k-w bit table */
-					f -= a + 1;	/* deduct codes from patterns left */
-					xp = c + k;
-					while (++j < z) {	/* try smaller tables up to z bits */
-						if ((f <<= 1) <= *++xp) {
-							break;	/* enough codes to use up j bits */
-						}
-						f -= *xp;	/* else deduct codes from patterns */
-					}
-				}
-				z = 1 << j;	/* table entries for j-bit table */
-
-				/* allocate and link in new table */
-				q = (huft_t *) xmalloc((z + 1) * sizeof(huft_t));
-
-				*t = q + 1;	/* link to list for huft_free() */
-				*(t = &(q->v.t)) = NULL;
-				u[h] = ++q;	/* table starts after link */
-
-				/* connect to last table, if there is one */
-				if (h) {
-					x[h] = i;	/* save pattern for backing up */
-					r.b = (unsigned char) l;	/* bits to dump before this table */
-					r.e = (unsigned char) (16 + j);	/* bits in this table */
-					r.v.t = q;	/* pointer to this table */
-					j = i >> (w - l);	/* (get around Turbo C bug) */
-					u[h - 1][j] = r;	/* connect to last table */
-				}
-			}
-
-			/* set up table entry in r */
-			r.b = (unsigned char) (k - w);
-			if (p >= v + n) {
-				r.e = 99;	/* out of values--invalid code */
-			} else if (*p < s) {
-				r.e = (unsigned char) (*p < 256 ? 16 : 15);	/* 256 is end-of-block code */
-				r.v.n = (unsigned short) (*p);	/* simple code is just the value */
-				p++;	/* one compiler does not like *p++ */
-			} else {
-				r.e = (unsigned char) e[*p - s];	/* non-simple--look up in lists */
-				r.v.n = d[*p++ - s];
-			}
-
-			/* fill code-like entries with r */
-			f = 1 << (k - w);
-			for (j = i >> w; j < z; j += f) {
-				q[j] = r;
-			}
-
-			/* backwards increment the k-bit code i */
-			for (j = 1 << (k - 1); i & j; j >>= 1) {
-				i ^= j;
-			}
-			i ^= j;
-
-			/* backup over finished tables */
-			while ((i & ((1 << w) - 1)) != x[h]) {
-				h--;	/* don't need to update q */
-				w -= l;
-			}
-		}
-	}
-	/* Return true (1) if we were given an incomplete table */
-	return y != 0 && g != 1;
-}
-
-/*
- * inflate (decompress) the codes in a deflated (compressed) block.
- * Return an error code or zero if it all goes ok.
- *
- * tl, td: literal/length and distance decoder tables
- * bl, bd: number of bits decoded by tl[] and td[]
- */
-static int inflate_codes(huft_t * my_tl, huft_t * my_td, const unsigned int my_bl, const unsigned int my_bd, int setup)
-{
-	static unsigned int e;	/* table entry flag/number of extra bits */
-	static unsigned int n, d;	/* length and index for copy */
-	static unsigned int w;	/* current gunzip_window position */
-	static huft_t *t;			/* pointer to table entry */
-	static unsigned int ml, md;	/* masks for bl and bd bits */
-	static unsigned int b;	/* bit buffer */
-	static unsigned int k;			/* number of bits in bit buffer */
-	static huft_t *tl, *td;
-	static unsigned int bl, bd;
-	static int resumeCopy = 0;
-
-	if (setup) { // 1st time we are called, copy in variables
-		tl = my_tl;
-		td = my_td;
-		bl = my_bl;
-		bd = my_bd;
-		/* make local copies of globals */
-		b = gunzip_bb;				/* initialize bit buffer */
-		k = gunzip_bk;
-		w = gunzip_outbuf_count;			/* initialize gunzip_window position */
-
-		/* inflate the coded data */
-		ml = mask_bits[bl];	/* precompute masks for speed */
-		md = mask_bits[bd];
-		return 0; // Don't actually do anything the first time
-	}
-
-	if (resumeCopy) goto do_copy;
-
-	while (1) {			/* do until end of block */
-		b = fill_bitbuffer(b, &k, bl);
-		if ((e = (t = tl + ((unsigned) b & ml))->e) > 16)
-			do {
-				if (e == 99) {
-					bb_error_msg_and_die("inflate_codes error 1");;
-				}
-				b >>= t->b;
-				k -= t->b;
-				e -= 16;
-				b = fill_bitbuffer(b, &k, e);
-			} while ((e =
-					  (t = t->v.t + ((unsigned) b & mask_bits[e]))->e) > 16);
-		b >>= t->b;
-		k -= t->b;
-		if (e == 16) {	/* then it's a literal */
-			gunzip_window[w++] = (unsigned char) t->v.n;
-			if (w == gunzip_wsize) {
-				gunzip_outbuf_count = (w);
-				//flush_gunzip_window();
-				w = 0;
-				return 1; // We have a block to read
-			}
-		} else {		/* it's an EOB or a length */
-
-			/* exit if end of block */
-			if (e == 15) {
-				break;
-			}
-
-			/* get length of block to copy */
-			b = fill_bitbuffer(b, &k, e);
-			n = t->v.n + ((unsigned) b & mask_bits[e]);
-			b >>= e;
-			k -= e;
-
-			/* decode distance of block to copy */
-			b = fill_bitbuffer(b, &k, bd);
-			if ((e = (t = td + ((unsigned) b & md))->e) > 16)
-				do {
-					if (e == 99)
-						bb_error_msg_and_die("inflate_codes error 2");;
-					b >>= t->b;
-					k -= t->b;
-					e -= 16;
-					b = fill_bitbuffer(b, &k, e);
-				} while ((e =
-						  (t =
-						   t->v.t + ((unsigned) b & mask_bits[e]))->e) > 16);
-			b >>= t->b;
-			k -= t->b;
-			b = fill_bitbuffer(b, &k, e);
-			d = w - t->v.n - ((unsigned) b & mask_bits[e]);
-			b >>= e;
-			k -= e;
-
-			/* do the copy */
-do_copy:		do {
-				n -= (e =
-					  (e =
-					   gunzip_wsize - ((d &= gunzip_wsize - 1) > w ? d : w)) > n ? n : e);
-			   /* copy to new buffer to prevent possible overwrite */
-				if (w - d >= e) {	/* (this test assumes unsigned comparison) */
-					memcpy(gunzip_window + w, gunzip_window + d, e);
-					w += e;
-					d += e;
-				} else {
-				   /* do it slow to avoid memcpy() overlap */
-				   /* !NOMEMCPY */
-					do {
-						gunzip_window[w++] = gunzip_window[d++];
-					} while (--e);
-				}
-				if (w == gunzip_wsize) {
-					gunzip_outbuf_count = (w);
-					if (n) resumeCopy = 1;
-					else resumeCopy = 0;
-					//flush_gunzip_window();
-					w = 0;
-					return 1;
-				}
-			} while (n);
-			resumeCopy = 0;
-		}
-	}
-
-	/* restore the globals from the locals */
-	gunzip_outbuf_count = w;			/* restore global gunzip_window pointer */
-	gunzip_bb = b;				/* restore global bit buffer */
-	gunzip_bk = k;
-
-	/* normally just after call to inflate_codes, but save code by putting it here */
-	/* free the decoding tables, return */
-	huft_free(tl);
-	huft_free(td);
-
-	/* done */
-	return 0;
-}
-
-static int inflate_stored(int my_n, int my_b_stored, int my_k_stored, int setup)
-{
-	static int n, b_stored, k_stored, w;
-	if (setup) {
-		n = my_n;
-		b_stored = my_b_stored;
-		k_stored = my_k_stored;
-		w = gunzip_outbuf_count;		/* initialize gunzip_window position */
-		return 0; // Don't do anything first time
-	}
-
-	/* read and output the compressed data */
-	while (n--) {
-		b_stored = fill_bitbuffer(b_stored, &k_stored, 8);
-		gunzip_window[w++] = (unsigned char) b_stored;
-		if (w == (unsigned int) gunzip_wsize) {
-			gunzip_outbuf_count = (w);
-			//flush_gunzip_window();
-			w = 0;
-			b_stored >>= 8;
-			k_stored -= 8;
-			return 1; // We have a block
-		}
-		b_stored >>= 8;
-		k_stored -= 8;
-	}
-
-	/* restore the globals from the locals */
-	gunzip_outbuf_count = w;		/* restore global gunzip_window pointer */
-	gunzip_bb = b_stored;	/* restore global bit buffer */
-	gunzip_bk = k_stored;
-	return 0; // Finished
-}
-
-/*
- * decompress an inflated block
- * e: last block flag
- *
- * GLOBAL VARIABLES: bb, kk,
- */
- // Return values: -1 = inflate_stored, -2 = inflate_codes
-static int inflate_block(int *e)
-{
-	unsigned t;			/* block type */
-	register unsigned int b;	/* bit buffer */
-	unsigned int k;	/* number of bits in bit buffer */
-
-	/* make local bit buffer */
-
-	b = gunzip_bb;
-	k = gunzip_bk;
-
-	/* read in last block bit */
-	b = fill_bitbuffer(b, &k, 1);
-	*e = (int) b & 1;
-	b >>= 1;
-	k -= 1;
-
-	/* read in block type */
-	b = fill_bitbuffer(b, &k, 2);
-	t = (unsigned) b & 3;
-	b >>= 2;
-	k -= 2;
-
-	/* restore the global bit buffer */
-	gunzip_bb = b;
-	gunzip_bk = k;
-
-	/* inflate that block type */
-	switch (t) {
-	case 0:			/* Inflate stored */
-	{
-		unsigned int n;	/* number of bytes in block */
-		unsigned int b_stored;	/* bit buffer */
-		unsigned int k_stored;	/* number of bits in bit buffer */
-
-		/* make local copies of globals */
-		b_stored = gunzip_bb;	/* initialize bit buffer */
-		k_stored = gunzip_bk;
-
-		/* go to byte boundary */
-		n = k_stored & 7;
-		b_stored >>= n;
-		k_stored -= n;
-
-		/* get the length and its complement */
-		b_stored = fill_bitbuffer(b_stored, &k_stored, 16);
-		n = ((unsigned) b_stored & 0xffff);
-		b_stored >>= 16;
-		k_stored -= 16;
-
-		b_stored = fill_bitbuffer(b_stored, &k_stored, 16);
-		if (n != (unsigned) ((~b_stored) & 0xffff)) {
-			return 1;	/* error in compressed data */
-		}
-		b_stored >>= 16;
-		k_stored -= 16;
-
-		inflate_stored(n, b_stored, k_stored, 1); // Setup inflate_stored
-		return -1;
-	}
-	case 1:			/* Inflate fixed
-						   * decompress an inflated type 1 (fixed Huffman codes) block.  We should
-						   * either replace this with a custom decoder, or at least precompute the
-						   * Huffman tables.
-						 */
-	{
-		int i;			/* temporary variable */
-		huft_t *tl;		/* literal/length code table */
-		huft_t *td;		/* distance code table */
-		unsigned int bl;			/* lookup bits for tl */
-		unsigned int bd;			/* lookup bits for td */
-		unsigned int l[288];	/* length list for huft_build */
-
-		/* set up literal table */
-		for (i = 0; i < 144; i++) {
-			l[i] = 8;
-		}
-		for (; i < 256; i++) {
-			l[i] = 9;
-		}
-		for (; i < 280; i++) {
-			l[i] = 7;
-		}
-		for (; i < 288; i++) {	/* make a complete, but wrong code set */
-			l[i] = 8;
-		}
-		bl = 7;
-		if ((i = huft_build(l, 288, 257, cplens, cplext, &tl, &bl)) != 0) {
-			return i;
-		}
-
-		/* set up distance table */
-		for (i = 0; i < 30; i++) {	/* make an incomplete code set */
-			l[i] = 5;
-		}
-		bd = 5;
-		if ((i = huft_build(l, 30, 0, cpdist, cpdext, &td, &bd)) > 1) {
-			huft_free(tl);
-			return i;
-		}
-
-		/* decompress until an end-of-block code */
-		inflate_codes(tl, td, bl, bd, 1); // Setup inflate_codes
-
-		/* huft_free code moved into inflate_codes */
-
-		return -2;
-	}
-	case 2:			/* Inflate dynamic */
-	{
-		const int dbits = 6;	/* bits in base distance lookup table */
-		const int lbits = 9;	/* bits in base literal/length lookup table */
-
-		huft_t *tl;		/* literal/length code table */
-		huft_t *td;		/* distance code table */
-		unsigned int i;			/* temporary variables */
-		unsigned int j;
-		unsigned int l;		/* last length */
-		unsigned int m;		/* mask for bit lengths table */
-		unsigned int n;		/* number of lengths to get */
-		unsigned int bl;			/* lookup bits for tl */
-		unsigned int bd;			/* lookup bits for td */
-		unsigned int nb;	/* number of bit length codes */
-		unsigned int nl;	/* number of literal/length codes */
-		unsigned int nd;	/* number of distance codes */
-
-		unsigned int ll[286 + 30];	/* literal/length and distance code lengths */
-		unsigned int b_dynamic;	/* bit buffer */
-		unsigned int k_dynamic;	/* number of bits in bit buffer */
-
-		/* make local bit buffer */
-		b_dynamic = gunzip_bb;
-		k_dynamic = gunzip_bk;
-
-		/* read in table lengths */
-		b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 5);
-		nl = 257 + ((unsigned int) b_dynamic & 0x1f);	/* number of literal/length codes */
-
-		b_dynamic >>= 5;
-		k_dynamic -= 5;
-		b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 5);
-		nd = 1 + ((unsigned int) b_dynamic & 0x1f);	/* number of distance codes */
-
-		b_dynamic >>= 5;
-		k_dynamic -= 5;
-		b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 4);
-		nb = 4 + ((unsigned int) b_dynamic & 0xf);	/* number of bit length codes */
-
-		b_dynamic >>= 4;
-		k_dynamic -= 4;
-		if (nl > 286 || nd > 30) {
-			return 1;	/* bad lengths */
-		}
-
-		/* read in bit-length-code lengths */
-		for (j = 0; j < nb; j++) {
-			b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 3);
-			ll[border[j]] = (unsigned int) b_dynamic & 7;
-			b_dynamic >>= 3;
-			k_dynamic -= 3;
-		}
-		for (; j < 19; j++) {
-			ll[border[j]] = 0;
-		}
-
-		/* build decoding table for trees--single level, 7 bit lookup */
-		bl = 7;
-		i = huft_build(ll, 19, 19, NULL, NULL, &tl, &bl);
-		if (i != 0) {
-			if (i == 1) {
-				huft_free(tl);
-			}
-			return i;	/* incomplete code set */
-		}
-
-		/* read in literal and distance code lengths */
-		n = nl + nd;
-		m = mask_bits[bl];
-		i = l = 0;
-		while ((unsigned int) i < n) {
-			b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, (unsigned int)bl);
-			j = (td = tl + ((unsigned int) b_dynamic & m))->b;
-			b_dynamic >>= j;
-			k_dynamic -= j;
-			j = td->v.n;
-			if (j < 16) {	/* length of code in bits (0..15) */
-				ll[i++] = l = j;	/* save last length in l */
-			} else if (j == 16) {	/* repeat last length 3 to 6 times */
-				b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 2);
-				j = 3 + ((unsigned int) b_dynamic & 3);
-				b_dynamic >>= 2;
-				k_dynamic -= 2;
-				if ((unsigned int) i + j > n) {
-					return 1;
-				}
-				while (j--) {
-					ll[i++] = l;
-				}
-			} else if (j == 17) {	/* 3 to 10 zero length codes */
-				b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 3);
-				j = 3 + ((unsigned int) b_dynamic & 7);
-				b_dynamic >>= 3;
-				k_dynamic -= 3;
-				if ((unsigned int) i + j > n) {
-					return 1;
-				}
-				while (j--) {
-					ll[i++] = 0;
-				}
-				l = 0;
-			} else {	/* j == 18: 11 to 138 zero length codes */
-				b_dynamic = fill_bitbuffer(b_dynamic, &k_dynamic, 7);
-				j = 11 + ((unsigned int) b_dynamic & 0x7f);
-				b_dynamic >>= 7;
-				k_dynamic -= 7;
-				if ((unsigned int) i + j > n) {
-					return 1;
-				}
-				while (j--) {
-					ll[i++] = 0;
-				}
-				l = 0;
-			}
-		}
-
-		/* free decoding table for trees */
-		huft_free(tl);
-
-		/* restore the global bit buffer */
-		gunzip_bb = b_dynamic;
-		gunzip_bk = k_dynamic;
-
-		/* build the decoding tables for literal/length and distance codes */
-		bl = lbits;
-
-		if ((i = huft_build(ll, nl, 257, cplens, cplext, &tl, &bl)) != 0) {
-			if (i == 1) {
-				bb_error_msg_and_die("Incomplete literal tree");
-				huft_free(tl);
-			}
-			return i;	/* incomplete code set */
-		}
-
-		bd = dbits;
-		if ((i = huft_build(ll + nl, nd, 0, cpdist, cpdext, &td, &bd)) != 0) {
-			if (i == 1) {
-				bb_error_msg_and_die("incomplete distance tree");
-				huft_free(td);
-			}
-			huft_free(tl);
-			return i;	/* incomplete code set */
-		}
-
-		/* decompress until an end-of-block code */
-		inflate_codes(tl, td, bl, bd, 1); // Setup inflate_codes
-
-		/* huft_free code moved into inflate_codes */
-
-		return -2;
-	}
-	default:
-		/* bad block type */
-		bb_error_msg_and_die("bad block type %d\n", t);
-	}
-}
-
-static void calculate_gunzip_crc(void)
-{
-	int n;
-	for (n = 0; n < gunzip_outbuf_count; n++) {
-		gunzip_crc = gunzip_crc_table[((int) gunzip_crc ^ (gunzip_window[n])) & 0xff] ^ (gunzip_crc >> 8);
-	}
-	gunzip_bytes_out += gunzip_outbuf_count;
-}
-
-static int inflate_get_next_window(void)
-{
-	static int method = -1; // Method == -1 for stored, -2 for codes
-	static int e = 0;
-	static int needAnotherBlock = 1;
-
-	gunzip_outbuf_count = 0;
-
-	while(1) {
-		int ret;
-
-		if (needAnotherBlock) {
-			if(e) {
-				calculate_gunzip_crc();
-				e = 0;
-				needAnotherBlock = 1;
-				return 0;
-			} // Last block
-			method = inflate_block(&e);
-			needAnotherBlock = 0;
-		}
-
-		switch (method) {
-			case -1:	ret = inflate_stored(0,0,0,0);
-					break;
-			case -2:	ret = inflate_codes(0,0,0,0,0);
-					break;
-			default:	bb_error_msg_and_die("inflate error %d", method);
-		}
-
-		if (ret == 1) {
-			calculate_gunzip_crc();
-			return 1; // More data left
-		} else needAnotherBlock = 1; // End of that block
-	}
-	/* Doesnt get here */
-}
-
-/* Initialise bytebuffer, be carefull not to overfill the buffer */
-extern void inflate_init(unsigned int bufsize)
-{
-	/* Set the bytebuffer size, default is same as gunzip_wsize */
-	bytebuffer_max = bufsize + 8;
-	bytebuffer_offset = 4;
-	bytebuffer_size = 0;
-}
-
-extern int inflate_unzip(int in, int out)
-{
-	ssize_t nwrote;
-	typedef void (*sig_type) (int);
-
-	/* Allocate all global buffers (for DYN_ALLOC option) */
-	gunzip_window = xmalloc(gunzip_wsize);
-	gunzip_outbuf_count = 0;
-	gunzip_bytes_out = 0;
-	gunzip_src_fd = in;
-
-	/* initialize gunzip_window, bit buffer */
-	gunzip_bk = 0;
-	gunzip_bb = 0;
-
-	/* Create the crc table */
-	make_gunzip_crc_table();
-
-	/* Allocate space for buffer */
-	bytebuffer = xmalloc(bytebuffer_max);
-
-	while(1) {
-		int ret = inflate_get_next_window();
-		nwrote = bb_full_write(out, gunzip_window, gunzip_outbuf_count);
-		if (nwrote == -1) {
-			bb_perror_msg("write");
-			return -1;
-		}
-		if (ret == 0) break;
-	}
-
-	/* Cleanup */
-	free(gunzip_window);
-	free(gunzip_crc_table);
-
-	/* Store unused bytes in a global buffer so calling applets can access it */
-	if (gunzip_bk >= 8) {
-		/* Undo too much lookahead. The next read will be byte aligned
-		 * so we can discard unused bits in the last meaningful byte. */
-		bytebuffer_offset--;
-		bytebuffer[bytebuffer_offset] = gunzip_bb & 0xff;
-		gunzip_bb >>= 8;
-		gunzip_bk -= 8;
-	}
-	return 0;
-}
-
-extern int inflate_gunzip(int in, int out)
-{
-	unsigned int stored_crc = 0;
-	unsigned char count;
-
-	inflate_unzip(in, out);
-
-	/* top up the input buffer with the rest of the trailer */
-	count = bytebuffer_size - bytebuffer_offset;
-	if (count < 8) {
-		bb_xread_all(in, &bytebuffer[bytebuffer_size], 8 - count);
-		bytebuffer_size += 8 - count;
-	}
-	for (count = 0; count != 4; count++) {
-		stored_crc |= (bytebuffer[bytebuffer_offset] << (count * 8));
-		bytebuffer_offset++;
-	}
-
-	/* Validate decompression - crc */
-	if (stored_crc != (gunzip_crc ^ 0xffffffffL)) {
-		bb_error_msg("crc error");
-	}
-
-	/* Validate decompression - size */
-	if (gunzip_bytes_out !=
-		(bytebuffer[bytebuffer_offset] | (bytebuffer[bytebuffer_offset+1] << 8) |
-		(bytebuffer[bytebuffer_offset+2] << 16) | (bytebuffer[bytebuffer_offset+3] << 24))) {
-		bb_error_msg("Incorrect length");
-	}
-
-	return 0;
-}